# changelog

author: Al Stone <ahs3@redhat.com> - 20130517-1
changelog:
  - Update to latest upstream source.
  - Remove acpica-tools-config.patch -- now in upstream
  - Remove iasl-signed-char.patch -- now in upstream
  - Updated debian-big_endian.patch
  - Updated debian-unaligned.patch


author: Al Stone <ahs3@redhat.com> - 20130517-2
changelog:
  - Correct an oversight: we provide an acpidump in conflict with the
    version in pmtools (which appears to be dead upstream) but had not
    made it an alternative before


author: Al Stone <ahs3@redhat.com> - 20130626-1
changelog:
  - Update to latest upstream source.
  - Move acpidump to acpidump-acpica so it be an alternative properly
  - Add basic man page for acpidump
  - Enable use of AAPITS tests during the check step


author: Al Stone <ahs3@redhat.com> - 20130725-2
changelog:
  - Fix several rpmlint items (listed below)
  - Add versions to explicit provides for acpixtract, acpidump
  - Not all setup steps used -q
  - Setup executable test script (run-misc-tests.sh) differently
  - Removed unneeded commented out line with macros in it
  - Removed mixed use of spaces and tabs (all spaces now)
  - Corrected source URLs (upstream moved)


author: Al Stone <ahs3@redhat.com> - 20130823-2
changelog:
  - Add in a copy of the GPLv2 text in order to comply with the requirement
    to always redistribute the terms of the license.


author: Dean Nelson <dnelson@redhat.com> - 20130823-3
changelog:
  - Fix run-misc-tests.sh script to properly set the number of BITS to 64 when run
    on a s390x system.


author: Dean Nelson <dnelson@redhat.com> - 20130823-7
changelog:
  - Fix the dangling symlink issue for acpidump(1) and acpixtract(1) man pages
    that was reported in RHBZ 1074681.


author: Dean Nelson <dnelson@redhat.com> - 20130823-8
changelog:
  - Fix run-misc-tests.sh script to properly set the number of BITS to 64 when run
    on a ppc64le system as requested by RHBZ 1125471.


author: Dean Nelson <dnelson@redhat.com> - 20140926-1
changelog:
  - Update to the latest upstream version of acpica as requested by RHBZ 967963.
  - Refresh existing patches and add new ones to enable a clean build.
  - Fix build failures that start before and finish after midnight.


author: Dean Nelson <dnelson@redhat.com> - 20150619-1
changelog:
  - Update to the latest upstream version of acpica as requested by RHBZ 1211328.
  - Refresh existing patches and add/delete ones to enable a clean build.
  - Add missing return status checks after a few calls to AcpiDmDumpTable() and
    one to fopen().


author: Dean Nelson <dnelson@redhat.com> - 20150619-3
changelog:
  - Remove acpitests-unix-%{version} directory from the build because it was a
    mistake that it was present and it complicated the fixing of the file
    permissions done related to RHBZ 1211328's requested rebase.


author: Dean Nelson <dnelson@redhat.com> - 20160527-1
changelog:
  - Update to the latest upstream version of acpica as requested by RHBZ 1278038.
  - Refresh existing patches and add/delete ones to enable a clean build.


author: Al Stone <ahs3@redhat.com> - 20160527-2
changelog:
  - Corrected the use of percent signs in the change log and made sure
    they are all properly escaped.  Resolves: #1425899.


author: Tim Hockin <thockin@sun.com>
changelog:
  - Fixed logging bug - not appending to log (O_APPEND needed)
    - Fix 'make install' to not need root access
    - Fix RPM spec to not need root


author: Tim Hockin <thockin@sun.com>
changelog:
  - Updated RPM spec with patch from sun for chkconfig on/off
    - Add Changelog, make 'make rpm' use it.


author: Miloslav Trmac <mitr@redhat.com> - 1.0.3-2
changelog:
  - Update to 1.0.3 (fixes #128834)
  - s/Copyright/License/
  - Add logrotate config file (#110677, from Michal Jaegermann)
  - Don't verify contents of /var/log/acpid (#125862)
  - Use $RPM_OPT_FLAGS
  - Fix and cleanup acpid-1.0.1-pm1.patch
  - Add condrestart to %postun


author: Phil Knirsch <pknirsch@redhat.com> - 1.0.4-3
changelog:
  - Disable the automatic shutdown -h via powerdown button by default due to
    conflicts with gnome-power-manager


author: Phil Knirsch <pknirsch@redhat.com> - 1.0.4-4
changelog:
  - Made a better fix for the powerdown button which checks if g-p-m is running
  - Don't install sample.conf anymore, not needed


author: Zdenek Prikryl <zprikryl@redhat.com> - 1.0.6-4.fc9
changelog:
  - Removed old logrotate file
  - Fixed socket leak (#394431)
  - Fixed dumping useless info to log (#389581)


author: Zdenek Prikryl <zprikryl@redhat.com> - 1.0.6-5.fc9
changelog:
  - Fixed managing of power button (#361501)
  - Fixed power script to check for KDE power manager (#419331)


author: Zdenek Prikryl <zprikryl@redhat.com> - 1.0.8-1
changelog:
  - Updated to version 1.0.8
  - power.sh works with ConsoleKit >= 0.3.0 (#470752)
  - Fixed conditions in power.sh, which look for power-managers (#470752)
  - Added check to init script


author: Jiri Skala <jskala@redhat.com> - 2.0.5-5
changelog:
  - fixes #648221 - SELinux is preventing /sbin/iwconfig access to a leaked /dev/input/event0 file descriptor


author: Jiri Skala <jskala@redhat.com> - 2.0.7-1
changelog:
  - update to latest upstream
  - fixes #660459 - Should be able to set options with /etc/sysconfig/acpi


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.0.18-1
changelog:
  - New version
  - Replaced RPM_BUILD_ROOT variables by {buildroot} macros
  - Updated URLs to project home page and source code
  - Dropped mk patch, handled better way in the spec


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.0.19-5
changelog:
  - Used unitdir macro instead of the hardcoded systemd paths
    Related: rhbz#1057268
  - Fixed bogus date in changelog (best effort)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.0.19-7
changelog:
  - Switched to dynamic connections (increased max connections from 20 to 1024)
    Resolves: rhbz#1351999
  - Simplified conversion script and moved it to posttrans to get rid of warnings
    during upgrade from RHEL-6 to RHEL-7
    Resolves: rhbz#1086686


author: Jaroslav Škarvada <jskarvad@redhat.com> - 2.0.19-9
changelog:
  - Switched kacpimon to dynamic connections (increased max connections
    from 20 to 1024)
    Resolves: rhbz#1450980


author: Stef Walter <stefw@redhat.com> - 0.5-1
changelog:
  - Update to upstream 0.5 version
  - No more libadcli, and thus no adcli-devel
  - Many new adcli commands
  - Documentation


author: Stef Walter <stefw@redhat.com> - 0.7-1
changelog:
  - Work around broken krb5 with empty passwords [#960001]
  - Fix memory corruption issue [#959999]
  - Update to 0.7, fixing various bugs


author: Stef Walter <stefw@redhat.com> - 0.7.4-1
changelog:
  - Update to upstream point release 0.7.4
  - Correctly handle truncating long host names [#1001667]
  - Try to contact all available addresses for discovery [#1004442]
  - Build fixes [#1004823]


author: Stef Walter <stefw@redhat.com> - 0.7.5-1
changelog:
  - Update to upstream point release 0.7.5
  - Workaround for discovery via IPv6 address [#1004442]
  - Correctly put IPv6 addresses in temporary krb5.conf


author: Sumit Bose <sbose@redhat.com> - 0.8.1-1
changelog:
  - Update to upstream release 0.8.1
  - Rebase adcli in RHEL-7.3 to version 0.8.0 [#1292530]
  - Support Host Keytab renewal [#1288485]
  - realmd not joining AD so ssh gssapi-with-mic works [#1061371]
  - technically wrong length checks in binary parsers  [#1027905]
  - avoid alloca in _adcli_ldap_have_in_mod [#1027889]
  - [RFE] adcli --stdin-password should be able to strip newline character from
    the input [#1134330]


author: Sumit Bose <sbose@redhat.com> - 0.8.1-3
changelog:
  - fix crash when name is specified on the command line and detect names with
    lower case characters [#1359773]


author: Sumit Bose <sbose@redhat.com> - 0.8.1-4
changelog:
  - adcli doesn't update kvno while joining system to AD domain (RODC) [#1471021]
  - adcli_tool_computer_delete description spelling [#1450179]
  - adcli man page should not only mention FILE type credential caches [#1423871]


author: Sumit Bose <sbose@redhat.com> - 0.8.1-5
changelog:
  - enable "Trust this computer for delegation to any service (Kerberos only)" [#1538730]
  - realm join fails with Insufficient permissions [#1542354]
  - adcli update option cannot add principals for computer object [#1545568]
  - adcli refuses to add service principals [#1547013]
  - [RFE] Support adding SPN of a different host [#1547014]
  - adcli segfaults during AD join RHEL 7.5 [#1575554]


author: Sumit Bose <sbose@redhat.com> - 0.8.1-6
changelog:
  - Couldn't set service principals on computer account [#1608212]
  - additional fix #1547014 and #1593240


author: Sumit Bose <sbose@redhat.com> - 0.8.1-7
changelog:
  - use autosetup macro to simplify patch handling
  - fixed rpmlint warnings in the spec file
  - join failed if hostname is not FQDN [#1649868]


author: Sumit Bose <sbose@redhat.com> - 0.8.1-8
changelog:
  - Various updates for RHEL-7.7
  - many adcli-krb5-????? directories are created /tmp [#1588596]
  - adcli exports kerberos ticket with old kvno [#1642546]
  - [RFE] Have `adcli join` work without FQDN in `hostname` output [#1595911]
  - Improve handling of service principals [#1644311]
  - [RFE] adcli command with --unix-* options doesn't update
    values in UnixAttributes Tab for user [#1337489]
  - [RFE] adcli join should preserve SPN added by adcli preset-computer [#1630187]
  - [RFE] Need an option for adcli command which will show domain join status. [#1622583]


author: Sumit Bose <sbose@redhat.com> - 0.8.1-9
changelog:
  - Fixes for RHEL-7.7 updates
  - additional patch for [RFE] adcli join should preserve SPN added by adcli
    preset-computer [#1630187]
  - new patches for many adcli-krb5-????? directories are created /tmp [#1588596]


author: Sumit Bose <sbose@redhat.com> - 0.8.1-10
changelog:
  - adcli is failing with "Couldn't add keytab entries: FILE:/etc/krb5.keytab:
    Cannot allocate memory" [1665162]


author: Sumit Bose <sbose@redhat.com> - 0.8.1-11
changelog:
  - Fixes and improvements for RHEL-7.8
  - Issue is that with arcfour-hmac as first encryption type in the config ... [#1683745]
  - adcli update --add-samba-data does not work as expected [#1738573]


author: Sumit Bose <sbose@redhat.com> - 0.8.1-14
changelog:
  - Fixes for RHEL-7.9
  - Update' adcli update --add-samba-data ' info under correct section in man adcli [#1774622]
  - [abrt] [faf] adcli: raise(): /usr/sbin/adcli killed by 6 [#1802258]


author: Sumit Bose <sbose@redhat.com> - 0.8.1-15
changelog:
  - More fixes for RHEL-7.9
  - No longer able to delete computer from AD using adcli [#1840752]
  - adcli: presetting $computer in $domain domain failed: Cannot set computer
    password: Authentication error [#1762633]


author: Than Ngo <than@redhat.com> - 1.15-21
changelog:
  - Resolves: #1711051, CVE-2019-8383 denial of service
  - Resolves: #1710910, CVE-2019-8379 null pointer dereference


author: Kevin Kofler <Kevin@tigcc.ticalc.org> - 2.5-9
changelog:
  - also remove include/agg_conv_gpc.h as it also carries a copy of the non-Free
    GPC license (upstream also recommends removing that file under
    http://www.antigrain.com/license/index.html#toc0005) (#559611)


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0:0.10-0.fdr.0.1.cvs20031104
changelog:
  - Only tar.gz available upstream.
  - byacc not needed when bison -y is available.
  - Installed Russian manual pages.
  - Updated with changes from CVS (2003-11-04).
  - getopt patch merged upstream.
  - bison-1.35 patch incorporated upstream.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0:0.10-0.fdr.1
changelog:
  - Update to 0.10 release.
  - memleaks patch merged upstream.
  - rootpath patch merged upstream.
  - fstat patch not needed anymore.
  - Updated URL.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0.11-1
changelog:
  - Update to 0.11 release.
  - useless-includes patch merged upstream.
  - old Russian man pages not available anymore.
  - disable static linking.


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0.12-1
changelog:
  - Update to 0.12 release.
  - now offers --disable-static, so -no-static patch is obsolete
  - fill last element of getopt struct array with zeroes


author: Michael Schwendt <mschwendt[AT]users.sf.net> - 0.12-3.20061027cvs
changelog:
  - CAUTION! This changes the database format and results in a report of
    false inconsistencies until an old database file is updated.
  - Check out CVS 20061027 which now contains Red Hat's
    acl/xattr/selinux/audit patches.
  - Patches merged upstream.
  - Update manual page substitutions.


author: Steve Grubb <sgrubb@redhat.com> - 0.14-3
changelog:
  - Fix bz 590561 aide does not detect the change of SElinux context
  - Fix bz 590566 aide reports a changed file when it has not been changed


author: Daniel Kopecek <dkopecek@redhat.com> - 0.15.1-4
changelog:
  - added patch to fix aide in FIPS mode
  - use only FIPS approved digest algorithms in aide.conf so that
    aide works by default in FIPS mode


author: Daniel Kopecek <dkopecek@redhat.com> - 0.15.1-6
changelog:
  - warn if processing prelinked binary objects and the prelink binary
    is not available
    Resolves: rbhz#1004826


author: Daniel Kopecek <dkopecek@redhat.com> - 0.15.1-10
changelog:
  - Updated the default configuration file. New defaults contributed
    by Steve Grubb.
    Resolves: rhbz#1304334


author: Kevin Kofler <Kevin@tigcc.ticalc.org> 0.81.0-0.1.20080526svn812787
changelog:
  - update to revision 812787 from KDE SVN (to match KDE 4.1 Beta 1)
  - restore builtin automoc4 for now
  - update file list, require pkgconfig in -devel (.pc file now included)


author: Rex Dieter <rdieter@fedoraproject.org> - 1.1.1-5
changelog:
  - own %_sysconfig/akonadi/mysql-local.conf
  - startup patch: reset conf only when needed, and clear mysql log file on update


author: Rex Dieter <rdieter@fedoraproject.org> 1.6.2-2
changelog:
  - switch back to mysql backend default
  - pkgconfig-style deps
  - own/ghost /etc/xdg/akonadi/akonadiserverrc


author: Rex Dieter <rdieter@fedoraproject.org> 1.6.90-2
changelog:
  - %check: try harder to make work in mock (using xvfb)
  - default to sqlite on 'small' platforms (arm)


author: Rex Dieter <rdieter@fedoraproject.org> 1.6.90-3
changelog:
  - BR: +postgresql-server, -mysql-devel
  - -devel: drop explicit BR: qt4-devel, pulled in via auto-pkgconfig deps


author: Bill Nottingham <notting@redhat.com> 1.0.6-6
changelog:
  - fix bad assertion that trips up gstreamer (fixes GNOME bug #159647)
  - undef gets in case it's a macro (#141423)


author: Colin Walters <walters@redhat.com> 1.0.7-2
changelog:
  - New patch alsa-lib-1.0.7-asym-config.patch, sets up asym
    in the default config file and makes it easy to make it
    the default via an environment variable.  Also increases the
    default dmix buffer variables.
  - Mark /etc/alsa/alsa.conf as a config file, and use sysconfdir
    variable


author: Martin Stransky <stransky@redhat.com> 1.0.9rc2-5
changelog:
  - fix for #130593
  - new ainit (dmix/dsnoop is default only for cards which really need it)
  - fix dsnoop
  - add fix for mixer (from https://bugs.gentoo.org/attachment.cgi?id=58918)


author: Martin Stransky <stransky@redhat.com> 1.0.11-2.rc2
changelog:
  - fix for #169729 - Kernel update makes snd-atiixp-modem & slmodemd fail
  - new ainit (0.7) should fix some problems with root users


author: Lennart Poettering <lpoetter@redhat.com> 1.0.14-2
changelog:
  - fixed #251307 - fix plugindir directory specification
  - fix build with newer glibc where open() is a macro


author: Matthias Saou <http://freshrpms.net/> 1.0.15-0.2.rc2
changelog:
  - Update License field.
  - Use configdir instead of sysconfdir hacks (cleaner).
  - Remove redundant optflags overriding.
  - Switch to using main "version", and merge "postver" since this is the right
    way of doing things (see NamingGuidelines#NonNumericRelease).
  - Remove static library.
  - Mark all of /etc/alsa as config, but not "noreplace".
  - Remove useless rpath on 64bit archs.


author: Lennart Poettering <lpoetter@redhat.com> 1.0.15-0.3.rc3
changelog:
  - Add hook to /etc/alsa/alsa.conf so that /etc/alsa/default-pulse.conf
    is loaded when it exists. This allows us to enable the pulse plugin by
    default depending on whether it is installed or not.


author: Jaroslav Kysela <jkysela@redhat.com> - 1.0.18-1.rc3
changelog:
  - updated to 1.0.18rc3
  - moved /etc/alsa configuration files back to /usr/share/alsa
  - removed pulse default patch (moved to /etc/asound.conf)
  - added /etc/asound.conf and /etc/alsa/alsactl.conf
  - disable /dev/aload device checking (obsolete for 2.6 kernels)


author: Jaroslav Kysela <jkysela@redhat.com> - 1.0.22-1
changelog:
  - Updated to 1.0.22 final
  - Fix file descriptor leak in pcm_hw plugin
  - Fix sound distortions for S24_LE - softvol plugin


author: Eric Moret <eric.moret@epita.fr> - 1.0.14-2
changelog:
  - Adding pulse as ALSA "default" pcm and ctl when the alsa-plugins-pulseaudio
  package is installed, fixing #251943.


author: Lennart Poettering <lpoetter@redhat.com> - 1.0.14-4
changelog:
  - In the pulse plugin: reflect the XRUN state back to the application.
    Makes XMMS work on top of the alsa plugin. (#307341)


author: Lennart Poettering <lpoetter@redhat.com> - 1.0.14-5
changelog:
  - Split pulse.conf into two, so that we can load one part from
    form /etc/alsa/alsa.conf. (#251943)


author: Lennart Poettering <lpoetter@redhat.com> - 1.0.14-6
changelog:
  - Merge the whole /etc/alsa/pcm/pulseaudio.conf stuff into
    /etc/alsa/pulse-default.conf, because the former is practically
    always ignored, since it is not referenced for inclusion by any other
    configuration file fragment (#251943)
    The other fragments installed in /etc/alsa/pcm/ are useless, too. But
    since we are in a freeze and they are not that important, I am not fixing
    this now.


author: Eric Moret <eric.moret@epita.fr> - 1.0.15-2
changelog:
  - Update to upstream 1.0.15 (#429249)
  - Add "Requires: pulseaudio" to alsa-plugins-pulseaudio (#368891)
  - Fix pulse_hw_params() when state is SND_PCM_STATE_PREPARED (#428030)
  - run /sbin/ldconfig on post and postun macros


author: Lubomir Kundrak <lkundrak@redhat.com> - 1.0.16-1
changelog:
  - New upstream, dropping upstreamed patches
  - Do not assert fail when pulseaudio is unavailable (#435148)


author: Eric Moret <eric.moret@gmail.com> - 1.0.19-1
changelog:
  - Updated to 1.0.19
  - Added Requires: alsa-utils to address #483322
  - Added dir {_sysconfdir}/alsa/pcm to address #483322


author: Jaroslav Kysela <jkysela@redhat.com> - 1.0.25-1
changelog:
  - Updated to 1.0.25
  - Moved plugin specific configuration from /etc/alsa/pcm to /usr/share/alsa/alsa.conf.d


author: Thorsten Leemhuis <fedora[AT]leemhuis.info> 1.0.0-0.fdr.0.3.rc2
changelog:
  - exit if error during build or install
  - fix install errors hdspconf, hdspmixer, usx2yloader
  - Split package in alsa-tools and alsa-tools-firmware
  - Integrate more docs


author: Thorsten Leemhuis <fedora[AT]leemhuis.info> - 0:1.0.1-0.fdr.2
changelog:
  - Integrate Michaels patch that fixes:
  - fix desktop files for fedora.us, adds buildreq desktop-file-utils
  - fix %install section for short-circuit installs


author: Tim Jackson <rpm@timj.co.uk> - 1.0.25-4
changelog:
  - Move udev rules to /lib/udev/rules.d (rhbz #748206)
  - remove %BuildRoot and %clean sections; no longer required


author: Rahul Sundaram <sundaram@fedoraproject.org> - 1.0.26.1-3
changelog:
  - remove vendor tag from desktop file. https://fedorahosted.org/fpc/ticket/247
  - clean up spec to follow current guidelines
  - don't build -tools for RHEL. Bill Nottingham patch. Resolves rhbz#586030


author: Jaroslav Kysela <jkysela@redhat.com> - 1.1.0-1
changelog:
  - Updated to 1.1.0
  - Enable hda-verb, hdajackretast, hdajacksensetest for i686/x86_64
  - Resolves: rhbz#1172560


author: Thorsten Leemhuis <fedora[AT]leemhuis.info> 1.0.0-0.fdr.0.2.rc2
changelog:
  - Update to 1.0.0rc2
  - added alsamixer Script -- stores settings on shutdown, does nothing on startup
  - some minor corrections in spec-file style


author: Thorsten Leemhuis <fedora[AT]leemhuis.info> 1.0.0-0.fdr.0.3.rc2
changelog:
  - Integrate Michael Schwendt's script alsamixer-saver; Still not quite sure if
    this script is the right way -- but mine didn't work...


author: Colin Walters <walters@redhat.com> 1.0.7-2
changelog:
  - New patch alsa-utils-1.0.7-alsa-launch.patch, adds the
    alsa-launch command.
  - New source file xinit-alsa-launch.sh, integrates alsa-launch
    into X startup
  - BR xorg-x11-devel


author: Bill Nottingham <notting@redhat.com> 1.0.8-4
changelog:
  - replace the dev.d script with a program that calls alsactl to
    restore the volume if there is a saved config, and just unmutes
    the playback channels if there isn't one (#132575)


author: Bill Nottingham <notting@redhat.com> 1.0.9-4
changelog:
  - migrate the alsa restore program to a udev rule, not a dev.d program
  - conflict with appropriate udev
  - move alsaunmute, alsacard to /bin


author: Martin Stransky <stransky@redhat.com> 1.0.14-0.4.rc2
changelog:
  - added support for large files
  - minor fix in alsaunmute
  - fixed #209239 - alsaconf: Stale language-dependent files
  - fixed #233765 - alsa-utils : unowned directories


author: Martin Stransky <stransky@redhat.com> 1.0.14-0.5.rc2
changelog:
  - added more funcionality to salsa (save/load sound settings),
    moved volume settings to /etc/alsa/


author: Martin Stransky <stransky@redhat.com> 1.0.15-0.1.rc1
changelog:
  - new upstream
  - moved saved volume settings to /var/lib (#293301)
  - patched alsactl for that (#255421)


author: Matthias Saou <http://freshrpms.net/> 1.0.15-0.2.rc1
changelog:
  - Update License field.
  - Mark udev rule as config.
  - Use find_lang macro again to include translations (why was it removed?).


author: Jaroslav Kysela <jkysela@redhat.com> 1.0.18-1.rc3
changelog:
  - updated to 1.0.18rc3
  - updated alsa-info.sh script to 0.4.51
  - removed alsacard utility
  - removed salsa utility
  - changed alsaunmute to use 'alsactl init' now
  - updated ALSA udevd rules to use alsactl
  - moved /etc/alsa/asound.state back to /etc/asound.state


author: Jaroslav Kysela <jkysela@redhat.com> 1.0.18-2.rc3
changelog:
  - fixed /lib/alsa/init path for x86_64 (was /lib64/alsa/init)
  - added /etc/alsa/asound.state -> /etc/asound.state shift to post section
  - fix udev rules (ommited /dev/ prefix for the alsactl utility)
  - added --ignore option for alsactl (added also to upstream)


author: Jaroslav Kysela <jkysela@redhat.com> 1.0.23-3
changelog:
  - add requires line (bug#526492) for specific alsa-lib package
  - add requires line for dialog package (bug#561988)
  - added man page for alsaunmute (bug#526174)
  - updated alsa-info.sh script to 0.4.59


author: Jaroslav Kysela <jkysela@redhat.com> 1.0.24.1-2
changelog:
  - add missing systemd files, add dependency on systemd-units
  - use own udev rule file for /lib/udev/rules.d
  - create /var/lib/alsa directory for asound.state


author: Lennart Poettering <lpoetter@redhat.com> - 1.0.24.1-5
changelog:
  - When installing the Fedora service files make sure to override the
    actual service files with them instead of the symlinks to them
  - Drop StandardOutput=syslog since that is the default now and we
    don't want to needlessly override the default


author: Jaroslav Kysela <jkysela@redhat.com> - 1.0.27.1-1
changelog:
  - Updated to 1.0.27.1
  - Updated alsa-info.sh to 0.4.61
  - Remove dependency on the dialog package (it is optional for alsa-info.sh)


author: Otto Hammersmith <otto@redhat.com>
changelog:
  - updated to 2.4.0b6, fixes security hole among other things
    (as well as finally got the glibc patch in the main source.)


author: Tim Powers <timp@redhat.com>
changelog:
  - fix so configure doesn't crap out (libtoolize --force)
  - gzip man pages, strip binaries
  - rebuilt for 6.2


author: Tim Powers <timp@redhat.com>
changelog:
  - make sure the man pages are gzipped in each subpackage, overriding the build
    system spec_install_post macro.
  - using mega spec file changes from Marc Merlin <merlin_bts@valinux.com> since
    the package we were shipping in the past had some major issues (not in
    Marc's words ;)
  - using Marc's added README and modified config files.
  - adapted patches written by Alexandre Oliva <oliva@dcc.unicamp.br> from Marc
    Merlin's package so that the patch matches the source version (the patches
    are the glibc2.1 and glibc2.2 patches)


author: Tim Powers <timp@redhat.com>
changelog:
  - fixed files/dirs ending up in the wrong packages.
  - last time it wasn't built with dump (doh!), this time it is. Now has a
    BuildRequires for dump.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - only do reload of xinetd if xinetd is running (#16653)
  - don't show output of reload command to STDOUT (#16653)
  - don't use /usr/sbin/tcpd in amidx, xinetd is linked
    with tcp_wrappers
  - prereq initscripts (fixes #14572 and duplicates)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - build with shared libraries.
  - add amanda-devel package to contain static libraries.
  - update to 2.4.2-19991216-beta1 (#16818).
  - sort out client-server file confusions (#17232).
  - amandaidx-xinetd should have "wait = no" (#17551).
  - /var/lib/amanda needs operator.disk ownership (17913).
  - /etc/xinetd.d/amanda added to the amanda-server package (#18112).
  - ignore socket error message (#18322).


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - don't have "chunksize -1" as the default, as it's no longer
    supported
  - make it uid amanda, with home /var/lib/amada
    so programs can actually access it (#20510)
  - make .amandahosts a config file (#18322)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - Use %{version} in source URL, and thus actually use 
    2.4.2p1 instead of 2.4.2 (doh! # 28759)
  - add patch to handle bogus /dev/root entries (#28759)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - 2.4.2p2 - fixes problems with amrecover (#26567)
  - made config files noreplace
  - don't build on IA64 right now, amanda doesn't like
    the dump there: It segfaults.


author: Jay Fenlason <fenlason@redhat.com> 2.4.3-2
changelog:
  - Add spec file entry for /usr/lib/amanda so owner/group set
    correctly  Fixes bugs 74025 and 73379.


author: Jay Fenlason <fenlason@redhat.com> 2.4.3-3
changelog:
  - Removed call to signal(SIGCHLD, SIG_IGN) which prevents wait...()
    from working on newer Red Hat systems.  This fixes bug #84092.


author: Jay Fenlason <fenlason@redhat.com> 2.4.4p2-1
changelog:
  - New upstream version, includes the -sigchld and -client-utils
    patches.  Also includes a new chg-disk changer script and a new
    amqde "quick-and-dirty estimate" program (called from sendsize--not
    a user command.


author: Jay Fenlason <fenlason@redhat.com> 2.4.5-2
changelog:
  - New upstream release.  This obsoletes the -bug144052 patch.
  - Reorg this spec file slightly to allow someone to specify
    index server, tape server and default configuration when
    rebuilding the rpms via something like
    'rpmbuild -ba --define "indexserver foo.fqdn.com" amanda.spec'
    This change suggested by Matt Hyclak <hyclak@math.ohiou.edu>.


author: Jay Fenlason <fenlason@redhat.com> 2.4.5p1-3
changelog:
  - Fix spec file to use %{_localstatedir} instead of hardcoding /var/lib
  - Add amanda_user and amanda_group defines, to make changing the username
    easier.
  - Add a BuildRequires on /usr/bin/Mail


author: Jay Fenlason <fenlason@redhat.com> 2.5.0-2
changelog:
  - New upstream release: 2.5.0, with new features
  - Do not include our own amanda.conf anymore, use the one from the
    tarball.
  - Remove the static libraries.
  - Update the -pie patch
  - Turn on the new -with-ssh-security option.
  - Change the mode of ~amanda/.amandahosts to 600, since 2.5.0 requires
    it.
  - actually use the defconfig macro it this spec file.
  - Change the name of the index server to "amandahost" from localhost.
    Users should ensure that "amandahost.their-domain" points to their
    Amanda server.
  - Change amandahosts likewise.
  - Add dependency on /usr/bin/Mail
  - Ensure unversioned .so files are only in the -devel rpm.
  - Remove DUMPER_DIR and the files in it, as nothing seems to actually
    use them.
  - Include the -overflow patch from Jean-Louis Martineau
    <martineau@zmanda.com>


author: Jay Fenlason <fenlason@redhat.com> 2.5.0p2-2
changelog:
  - New upstream version
  - Make the BuildRequires on /usr/bin/Mail rather than mailx, because we
    don't really care where the Mail command comes from.
  - include the amcheck_badtape patch by Paul Bijnens
    <paul.bijnens@xplanation.com> to fix a problem where amcheck doesn't
    realize the wrong tape is in the drive.
  - include the error_msg patch from Jean-Louis Martineau <martineau@zmanda.com>
    to fix a double-free problem
  - include the restore patch from Jean-Louis Martineau <martineau@zmanda.com>
    to fix an error in amrestore
  - include a slightly modified form of the big_holding_disk patch from
    Andrej Filipcic <andrej.filipcic@ijs.si> to fix a problem with holding
    disks bigger than 4tb


author: Jay Fenlason <fenlason@redhat.com> 2.5.0p2-3
changelog:
  - move libamclient-*.so to the base rpm, so that multilib support works.
    This fixes
    bz#205202 File conflicts


author: Jay Fenlason <fenlason@redhat.com> 2.5.0p2-4
changelog:
  - Include my -dump_size patch to close
    bz#206129: Dump output size determined incorrectly
  - Clean up the spec file, following some suggestions in
    bz#185659: amanda 2.5.0
  - Use a tarball without the problematic contrib/sst directory.
  - Include my new_gnutar (based on a patch by Orion Poplawski
    <orion@cora.nwra.com>) to work around changed incremental file format
    in newer (>1.15.1) versions of gnutar.
  - include my -wildcards patch to turn on wildcards with new versions of tar.


author: Jay Fenlason <fenlason@redhat.com> 2.5.1p3-1.an7
changelog:
  - Upgrade to new upstream release, now that 2.5.1 is somewhat stable.
  - Note that this requires changing the xinetd configuration and amanda.conf
    because of the new authentication mechanism.
  - -server subpackage does not require xinetd.
  - -server scriptlets do not need to reload xinetd.


author: Radek Brich <rbrich@redhat.com> 2.5.2.p1-1
changelog:
  - New upstream version.
  - Client rpm now installs amanda-client.conf.
  - Removed obsolete patches -bug18322 and -rsh.
  - Clean up spec file (non-utf8 error and some warnings from rpmlint).


author: Radek Brich <rbrich@redhat.com> 2.5.2.p1-2
changelog:
  - Fix undefined symbols in libamserver.so.
  - Fix ./autogen so it automatically installs ylwrap (bug 224143).
  - Run ./autogen in prep section (otherwise the -pie patch had no effect).
  - Update -pie patch.


author: Radek Brich <rbrich@redhat.com> 2.5.2.p1-3
changelog:
  - Update -undefSymbols patch. All undefined symbols reported by
    'ldd -r' should now be fixed (#198178).


author: Radek Brich <rbrich@redhat.com> 2.5.2.p1-5
changelog:
  - Added ssh and ncompress to BuildRequires (#250730).
  - Removed some obsolete makes from build section.


author: Radek Brich <rbrich@redhat.com> 2.5.2.p1-9
changelog:
  - Change default amanda user name to 'amandabackup' (#124510).
    This should not break upgrades as config files are checked for
    old user name and updated.
  - Add some explaining comments to .amandahosts (#153749)


author: Orion Poplawski <orion@cora.nwra.com> 2.6.0-0.b2
changelog:
  - Update to 2.6.0b2, drop upstreamed patches
  - Update xattrs patch
  - Add patches to fix install locations
  - Add -fPIE/-pie to CFLAGS/LDFLAGS, drop pie patch
  - Drop autotools BR
  - Drop /usr/bin/Mail BR and specify mailer as /bin/mail
  - Add %check section
  - Move /etc/amanda/amandates to /var/lib/amanda/amandates
  - Remove ending . from summaries


author: Orion Poplawski <orion@cora.nwra.com> 2.6.0-0.b2_20080220.1
changelog:
  - Update to 2.6.0b2-20080220
  - Drop libdir patch, use --with-libdir instead
  - Move perl modules to %{perl_vendorarch} and add perl Requires


author: Orion Poplawski <orion@cora.nwra.com> 2.6.0-0.b3_20080310.1
changelog:
  - Update to 2.6.0b3_20080310
  - Re-add updated pie patch, re-add autogen
  - Update example patch to modify Makefile.am, leave template.d in
   /var/lib/amanda for now


author: Daniel Novotny 2.6.0p2-1
changelog:
  - Update to 2.6.0p2
  - perl-ExtUtils-Embed added to BuildRequires
  - perl patch dropped (upstreamed)
  - library name change from libamglue.so.* to libamglue.so


author: Orion Poplawski <orion@cora.nwra.com> 2.6.0p2-2
changelog:
  - Drop duplicated libamglue.so from -devel
  - Update -pie patch
  - Fix Source typo
  - Move xinetd to main package - used by both client and server
  - Move %{_libexecdir}/amanda/amanda-sh-lib.sh to main package
  - LIBEXECDIR is used in xinetd template
  - Make calcsize setuid root


author: Daniel Novotny <dnovotny@redhat.com> 2.6.0p2-9
changelog:
  - fix #497488 -  amanda subpackages require only a specific version of amanda,
        not also release


author: Jan Görig <jgorig@redhat.com> - 3.1.0-1
changelog:
  - upgraded to new upstream version
  - documentation moved to main package
  - fixed license tag
  - moved files from libexecdir to libdir to avoid multilib conflict
  - moved files between subpackages
  - updated path in xinetd config
  - added -fPIE to CFLAGS and -pie to LDFLAGS
  - removed unused patches
  - removed obsolete devel subpackage


author: Jan Görig <jgorig@redhat.com> - 3.1.1-1
changelog:
  - upgraded to new upstream bugfix version
  - dropped old upgrade scriptlets
  - spec cleanups
  - created symlink to manpage for amoldrecover
  - default configuration now backups extended attributes
  - fix #610169 - fixed build flags
  - fix #600552 - corrected amdatadir path, updated example patch


author: Jan Görig <jgorig@redhat.com> - 3.1.1-2
changelog:
  - removed obsolete README-rpm
  - modified client configuration to match xinetd one
  - modified tcpport patch to include postgresql sample configuration


author: Jan Görig <jgorig@redhat.com> - 3.2.0-1
changelog:
  - upgrade to new upstream release
  - fixed build with new glib
  - changed owner of the most files to root
  - moved variable files from /etc/amanda to /var/lib/amanda
  - spec cleanups
  - fix #648321 - amanda rpm should not provide the perl(Math::BigInt)


author: Jan Görig <jgorig@redhat.com> - 3.2.2-1
changelog:
  - upgrade to new upstream release
  - removed merged patch amanda-3.1-amrestore.patch
  - fixed build on system with amanda installed


author: Jan Görig <jgorig@redhat.com> - 3.3.0-1
changelog:
  - upgrade to new upstream release
  - uses bsdtcp authentication by default
  - dropped amanda-3.1.1-bsd.patch
  - modified example directory handling and dropped amanda-3.1.0-example.patch


author: Lukáš Nykrýn <lnykryn@redhat.com> - 3.3.0-3
changelog:
  - fix #757618 - Use of qw(...) as parentheses is deprecated
  - fix #752253 - Using functions in amanda-client which are provided by server


author: Petr Hracek <phracek@redhat.com> - 3.3.2-4
changelog:
  - fix (#858703) add killpgrp(8) man page to the amanda-client package
      (killpgrp will be removed from man-pages package)
  - Fix autogen for parallel tests.


author: Petr Hracek <phracek@redhat.com> - 3.3.3-1
changelog:
  - New upstream version
  - Dependecy to /usr/sbin/service was removed.
   Instead of /usr/sbin/service systemd files are used.


author: Josef Ridky <jridky@redhat.com> - 3.3.3-18
changelog:
  - Resolves: #1286330 - set non-blocking connection
  - Resolves: #1299761 - fix amindex: invalid service
  - Resolves: #1306980 - fix problem with handling compressed files


author: Josef Ridky <jridky@redhat.com> - 3.3.3-21
changelog:
  - Resolves: #1417830 - check return value from setreuid method
  - Resolves: #1423040 - fix local authentication issue


author: Brian C. Lane <bcl@redhat.com> - 20.2-1
changelog:
  - Use the new wait for connectivity function (mkolman)
  - Improve waiting for network connectivity (mkolman)
  - Use langtable to get default layout instead of our magic (#485137) (vpodzime)
  - Adapt to the new localization module (vpodzime)
  - Rewrite the localization module (vpodzime)
  - Make the Welcome spoke wait for Geolocation lookup to finish (#975193)
    (mkolman)


author: Brian C. Lane <bcl@redhat.com> - 20.3-1
changelog:
  - Fix driver disk path for inst.dd= method (#987513) (bcl)
  - Add support for NFS as install source in TUI. (#971298) (sbueno+anaconda)
  - Allow logging into multiple iscsi nodes at once (#975831). (clumens)
  - Fix crash while parsing ntp servers from DHCP6 (#969303) (dshea)
  - Use ExceptionInfo namedtuple when dumping anaconda (#982299) (vpodzime)
  - Wait for device connections for iface-bound iscsi in kickstart (#740105)
    (rvykydal)
  - Refer to blivet instead of storage in iscsi kickstart (#740105) (rvykydal)
  - Mark disk 'selected' if only one present in TUI. (#975790) (sbueno+anaconda)
  - Update devicetree only if we logged in to some target in add iscsi dialog.
    (rvykydal)
  - Don't show multipath members in specialized disks overview (#740105)
    (rvykydal)
  - Do not populate devicetree after each single login in iscsi dialog (#740105)
    (rvykydal)
  - Match also iface when logging into selected iface-bound iscsi target
    (#740105) (rvykydal)
  - Fix handling of non-ASCII names (#969309) (dshea)
  - Use inline completion for the region/city selection (vpodzime)
  - Fix copyright of the main anaconda script (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 20.4-1
changelog:
  - POTFILES.in: rename time.py to time_spoke.py (bcl)
  - Only move INSTALL_TREE when it is mounted (#888196) (bcl)
  - Use ksdata.method.seen (#986069) (bcl)
  - Threaded Koji RPM lookups and downloads (mkolman)
  - Fix the langcode parsing regexp (vpodzime)
  - Move tests to old_tests and add some new, working tests (vpodzime)
  - Replace hostname with hostnamectl (#989584) (rvykydal)
  - Require fcoe-utils only on ix86 and x86_64 architectures (#989913) (vpodzime)
  - Fix searching for local RPMs with no version required (vpodzime)
  - Expand the '~' in the RPM_FOLDER_NAME (vpodzime)
  - Set system date and time with our own function (vpodzime)
  - Remove the useless, confusing and lying PoolsNote (vpodzime)
  - Use tiny, fast and thread-safe ntplib module instead of ntpdate (vpodzime)
  - For vnc require network in intramfs (#989156) (rvykydal)
  - Fix makeupdates' package fetching when no version is specified (vpodzime)
  - Make it clear on the summary dialog that changes take effect later. (clumens)
  - Don't mark the summary dialog's tree view as insensitive. (clumens)
  - Work with files in a more pythonic way in makeupdates (vpodzime)
  - Honor hostname set in kickstart (#988483) (rvykydal)
  - Do not automatically set UTC mode on kickstart installs. (clumens)
  - Add automatic fetching of RPMs for new Defines & Requires (mkolman)
  - Don't prompt for ssh on s390x if doing an image install. (#983056) (sbueno)
  - Rename tz spoke to avoid potential conflict with std 'time' module. (sbueno)


author: Brian C. Lane <bcl@redhat.com> - 20.5-1
changelog:
  - Don't wait for systemctl shutdown command to exit (#974383) (bcl)
  - Fix the logging of the spice-vdagent status (dshea)
  - Update PYTHONPATH so unit tests work right out of the source tree. (clumens)
  - Don't check for a firstboot service file before processing the command.
    (clumens)
  - Strengthen the services command processing a bit. (clumens)
  - Start spice-vdagent (#969405) (dshea)
  - Skip password strength check for kickstart passwords (#986490) (dshea)
  - Network spoke: fix refresh of device IP configuration (rvykydal)
  - Add unsupported hardware dialog (#872728) (bcl)
  - storage.py -> system.py in POTFILES.in (clumens)
  - border_width=5 -> border_width=6 (clumens)
  - No need to call threads_init anymore (bcl)
  - Consolidate storage and networking under one category (#973013). (clumens)
  - When doing a live install, set the ks method appropriately (#986069).
    (clumens)
  - Check that we're doing an HD install before examining the attr (#989428).
    (clumens)


author: Brian C. Lane <bcl@redhat.com> - 20.6-1
changelog:
  - Import DBusGMainLoop directly (bcl)
  - Catch AttributeError when looking for InstallClass (bcl)
  - dracut/parse-kickstart should use the updated method-related classes
    (#994978). (clumens)
  - Ignore warnings about the global keyword and the DefaultInstall class.
    (clumens)
  - Fix all the pylint warnings in the anaconda file. (clumens)
  - Deal with the last of the catching Exception warnings. (clumens)
  - Always define a continueButton and quitButton property. (clumens)
  - Fix pylint warnings in the installclasses. (clumens)
  - Remove a directory that does not exist from the PYTHONPATH for pylint.
    (clumens)
  - Fix up some warnings about calling the superclass's __init__ method.
    (clumens)
  - Remove the reference to "anaconda" in reIPL. (clumens)
  - Fix up almost all of the redefining warning messages. (clumens)
  - Add a bunch of gobject-introspection related ignore lines. (clumens)
  - StorageChecker ought to have a self.storage attribute. (clumens)
  - Ignore another error pylint can't quite figure out. (clumens)
  - pylint doesn't understand what's in AnacondaKSHandler. (clumens)
  - Remove the "Add custom add-on" button. (clumens)
  - Fix up places where overridden methods don't take the same number of args.
    (clumens)
  - Fix up all unused variable warnings. (clumens)
  - Added files to MAINTAINERCLEANFILES (dshea)
  - Reenabled the pylint test target (dshea)
  - Cleanup the autogen scripts. (dshea)
  - Remove m4 files from the widgets project. (dshea)
  - Install gettext files at build time. (dshea)
  - Use the python checks provided by automake. (dshea)
  - Added a missing type check found by autoscan (dshea)
  - Cleanup the widgets autoconf file (dshea)
  - Add detail to logs when creating users and groups (dshea)
  - Fix miscellaneous errors in installclass.py. (clumens)
  - Fix a variety of errors in the packaging module. (clumens)
  - Do not run pylint against executable files in pyanaconda/. (clumens)
  - Clean up deprecated uses of the string module. (clumens)
  - Call the right superclass's method. (clumens)
  - Straighten out text UI methods so they have the same method signature.
    (clumens)
  - Remove the lines to ignore E0611. (clumens)
  - Bootloader.read is completely unused; cut it. (clumens)
  - Fix all the "X is defined outside of __init__" warnings. (clumens)
  - Display the correct string for the space required by packages. (clumens)
  - Remove lines that clearly just don't do anything. (clumens)
  - If we're not going to use the return value, don't grab it. (clumens)
  - kernelVersionList in tarpayload.py should act the same as all other versions.
    (clumens)
  - If we're not going to use the exception object, don't grab it. (clumens)
  - Define stage2_device in the BootLoader class. (clumens)
  - Don't call getPassAlgo before running createGroup. (clumens)
  - Remove some unused values out of constants.py. (clumens)
  - Finish taking care of pylint warnings in image.py. (clumens)
  - Remove the unused network and write methods from the Anaconda object.
    (clumens)
  - Remove the disable-msg lines for a couple C messages. (clumens)
  - Remove some easy unused argument warnings. (clumens)
  - Remove everything from InstallInterfaceBase except what Rescue needs.
    (clumens)
  - Remove the duplicated imports. (clumens)
  - Do not use a list or a dict as a default argument to a method. (clumens)
  - Remove unneeded lambdas. (clumens)
  - Fix up all the warnings where we used a reserved function name or keyword.
    (clumens)
  - Fix up about half of the "except:" and "except Exception:" lines. (clumens)
  - Fix a couple undefined variable errors that were real bugs. (clumens)
  - Ignore statements that have no effect. (clumens)
  - Fix up all the wildcard imports except two in packaging. (clumens)
  - Remove all unused import lines. (clumens)
  - Remove unnecessary pass statements. (clumens)
  - Fix bad indentation and tab-instead-of-space warnings from pylint. (clumens)
  - Put the pylint test back into service. (clumens)
  - Run make with multiple jobs in makeupdates (vpodzime)
  - Use gtk_image_new_from_icon_name (bcl)
  - Remove caching of unused device list. (dlehman)
  - Check MBR gap size even when /boot is on a plain partition. (#986431)
    (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 20.7-1
changelog:
  - Modify the gtk_warning function in anaconda to use gtk3. (clumens)
  - Fix some pylint warnings in the new DNF code. (clumens)
  - Fix a couple more pykickstart handler version mismatches. (clumens)
  - anaconda requires a later version of partitioning syntax now. (clumens)
  - packaging: add dnf to the Anaconda's requires. (ales)
  - Enable DNFPayload on specific triggers. (ales)
  - DNFPayload: initial version. (ales)
  - refactor: tear down the install device in PackagePayload.reset(). (ales)
  - refactor: extract the device handling in YumPayload._configureBaseRepo up to
    PackagePayload. (ales)
  - refactor: move YumPayload._setUpMedia() up to PackagePayload._setupMedia().
    (ales)
  - Tweaks in the Payload interface. (ales)
  - remove: configureAddOnRepo from the Payload interface. (ales)
  - Payload: forgotten comment in spaceRequired() (ales)
  - Payload: define txID to None. (ales)
  - The NFS text dialog should never attempt to use method.url (#998446).
    (clumens)
  - Remove the unittest target, since "make check" will do this for us. (clumens)
  - Use the latest version of the RAID kickstart handler. (clumens)
  - Update both the method and repo info. (dshea)
  - remove the UBOOT class arm systems are now using EXTLINUX (dennis)
  - ARM: switch to using extlinux by default (dennis)
  - Update our pylint arguments. (clumens)
  - Don't implicitly unpack exceptions.  That won't be supporetd in the future.
    (clumens)
  - Modify how we call logging functions to take a list of parameters. (clumens)
  - Use "raise Exception()" instead of "raise Exception, ..." (clumens)
  - Hook up pylint and our nosetests to be run via "make check". (clumens)
  - Drop unneeded required_space_text variable. (#997690) (dlehman)
  - Specify also query script when getting locale's native name (vpodzime)
  - Update runpylint.sh for pylint 1.0.0 (bcl)
  - Clean up translation placeholders (#890157) (bcl)
  - Don't override multilib setting unless the option was passed. (#987557)
    (dlehman)
  - Set the encoding of custom.py to utf-8 (dshea)
  - Report if a package was not found in Koji during autofetch (mkolman)
  - Convert makeupdates from getopt to argparse (mkolman)
  - Fixed the interpretation of RAID levels (dshea)
  - Consolidate get_object() calls. (dshea)
  - Add ASCII-only upper and lower string functions. (dshea)
  - Fix the User/Group already exists log messages. (dshea)
  - Normalize keyboard layout and variant strings from langtable (vpodzime)
  - A few tests for the keyboard layout and variant strings processing (vpodzime)
  - More robust parsing of the layout and variant string specification (vpodzime)
  - Move DEFAULT_VC_FONT to constants (vpodzime)
  - Match langs with stripped accents when filtering languages (vpodzime)
  - Fix the User subclass using an old version of the pykickstart superclass.
    (clumens)
  - Bring the kickstart version test back to life. (clumens)
  - Don't read proxy for methods that have no proxy (dshea)


author: Brian C. Lane <bcl@redhat.com> - 20.8-1
changelog:
  - Fix a SIGSEGV when returning from storage spoke (#983319) (dshea)
  - makebumpver: Fix problem with single line body (bcl)
  - For now, ignore checking dnfpayload.py with pylint. (clumens)
  - Don't do str() on an exception we're passing into a string substitution.
    (clumens)
  - Check for hwaddress exceptions. (dshea)
  - If LANG isn't set, set it to default value. (#997397) (sbueno+anaconda)
  - Remove yet another unused import. (clumens)
  - swap devices should be under the System portion (#962668). (clumens)
  - Populate the repo store before changed can ever be called (#994940).
    (clumens)
  - Make the ISO choosing widget wider (#973376). (clumens)
  - Don't recommend /usr as a separate mount point anymore (#981465). (clumens)
  - Do not run another instance of the TUI for errors (#997661) (vpodzime)
  - Do not try to exit from the installation thread (vpodzime)
  - Tell which thread failed to be added by the ThreadMgr (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 20.9-1
changelog:
  - Text network spoke: basic configuration support (#909299) (rvykydal)
  - Add support for network configuration in TUI. (#909299) (sbueno+anaconda)
  - Remove partial matches from Koji search results (mkolman)
  - Handle >=,<=,= for package version, fix -a/--add (mkolman)
  - Return only network devices supported in installer from nm_devices (#999514)
    (rvykydal)
  - Obtain network device type specific dbus interface dynamically (#999514)
    (rvykydal)
  - Catch no-hwaddr exception only for the respective call (#999514) (rvykydal)
  - Don't catch hwaddr not found exception for ethernet devices (#999514)
    (rvykydal)
  - Added a validation test for the GUI group list (dshea)
  - Validate input fields on the user spoke. (#967245) (dshea)
  - Added an input validation framework. (dshea)
  - Pre-fetch widgets in advanced user dialog (dshea)
  - Change validatePassword to be more flexible. (dshea)
  - Moved regexes into regexes.py. (dshea)


author: Brian C. Lane <bcl@redhat.com> - 20.10-1
changelog:
  - Optionally hide the GUI option to install updates (dshea)
  - Move the really_hide and really_show functions to utils (vpodzime)
  - Search for all translations, not only one per langauge (#1001446) (vpodzime)
  - Use the DEFAULT_LANG if GeoIP suggestion cannot be used (#1000715) (vpodzime)
  - Network spoke: fix showing of ipv6 addresses (rvykydal)
  - Use the sensitive-info log for sensitive location info (#986844) (mkolman)
  - Add new logger for sensitive information (mkolman)
  - Handle %define changes for autofetch (mkolman)
  - Update dumping of network info for new nmcli interface. (rvykydal)
  - Text network spoke: more strict ipv6 address input checking (#909299)
    (rvykydal)
  - Network spoke: show global ipv6 addresses (rvykydal)
  - Text network spoke: add to translated files (po/POTFILES.in) (#902299)
    (rvykydal)
  - Text network spoke: require netmask and gateway for static ipv4 (#902299)
    (rvykydal)
  - Text network spoke: Condense device configuration information (#902299)
    (rvykydal)
  - Text network spoke: fix ipv4 regex (#909299) (rvykydal)
  - Resolved accelerator conflicts and marked excpetions. (dshea)
  - Added tests for duplicated keyboard accelerators (dshea)
  - Implement group creation with GID in GUI (#968085) (dshea)
  - Remove unused imports. (dshea)
  - Move dynamic labels out of custom.glade (#1000703) (dshea)


author: Brian C. Lane <bcl@redhat.com> - 20.11-1
changelog:
  - Add more details to iso device selector (#971290) (bcl)
  - Warn user if they enter a weak password in TUI. (#1001039) (sbueno+anaconda)
  - Don't mark spoke as completed if no repo is set. (#1001538) (sbueno+anaconda)
  - Don't enable chronyd if disabled in kickstart (#1002583) (mkolman)
  - Run firstboot-only spokes on first boot by default (vpodzime)
  - Let hubs specify which environments they support (vpodzime)
  - Don't mount cdroms that contain no mountable media. (#1000889) (dlehman)
  - Don't try to parse langcode if none given (vpodzime)
  - Get rid of the non-deterministic expand_langs and its usage (vpodzime)
  - Rework the Langsupport spoke to work with all locales (vpodzime)
  - Rework the Welcome spoke to allow users choose from all locales (vpodzime)
  - Improve import in GUI utils a bit (vpodzime)
  - Remove the cryptic "language-default keyboard" checkbutton (vpodzime)
  - Allow seting up locale without modifying ksdata (vpodzime)
  - Remove an unused argument of get_available_translations (vpodzime)
  - Setup language early to a value we can figure out (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 20.12-1
changelog:
  - Cleanup arch tests (dshea)
  - Rearranged the automake tests. (dshea)
  - Update po/ build files to the current gettext (dshea)
  - Use libtool with gtkdoc-scanobj (dshea)
  - Use autoconf to set the spec file Version. (dshea)
  - Use the ustar format with make dist (dshea)
  - Fix widgets autotools generation. (dshea)
  - Require gtk-doc and GObject. (dshea)
  - dracut no longer auto assembles everything (#960496) (bcl)
  - Only ignore missing packages entries (#983316) (bcl)
  - Fix a string that was modified before translation (#1004960) (dshea)
  - Let users configure keyboard via anaconda in live installations (#1002533)
    (vpodzime)
  - Use copy instead of move for NTP configuration (#985566) (hdegoede)
  - Share code between the Welcome and Langsupport spokes (vpodzime)
  - Do not try to set None as hostname (#1002737) (vpodzime)
  - Fix crash on LiveCD if network is configured before installing (#1002373)
    (rvykydal)


author: Brian C. Lane <bcl@redhat.com> - 20.13-1
changelog:
  - Fix handling of flexible specs in onpart for member devices. (#1004885)
    (dlehman)
  - Always regenerate initramfs (#994180) (bcl)
  - Avoid the use of NamedTuple._make (dshea)
  - Add superclass __init__()s and fix an indent (dshea)
  - Pass logging string format variables as parameters (dshea)
  - Remove unnecessary variables, imports, semicolons (dshea)
  - Fix the user/group name regex (dshea)
  - Fix problems with the test scripts (dshea)
  - Handle kickstarts that don't specify timezone (#1001598) (mkolman)
  - Don't set "date of last password change" /etc/shadow field (#985572)
    (hdegoede)


author: Brian C. Lane <bcl@redhat.com> - 20.14-1
changelog:
  - Convert the lightbox into a GObject (#1000927) (dshea)
  - Remove some more unused imports. (clumens)
  - Move the Anaconda class to a proper module (vpodzime)
  - Firstboot should be disabled by default after automated installations
    (vpodzime)
  - Fix typo introduced in refactorization (#1005511) (vpodzime)
  - Remove unused imports in the network spoke. (clumens)
  - Get rid of the now-unused new_firmware variable. (clumens)
  - Remove magic from the passphrase dialog (#921948) (vpodzime)
  - Don't pass extra arguments to LangLocaleHandler.__init__() (vpodzime)
  - Fix check for device state when reading its IPXConfig (#1001776, # 1005198)
    (rvykydal)


author: Brian C. Lane <bcl@redhat.com> - 20.15-1
changelog:
  - Don't set up the resize slider for non-resizable devices. (#997690) (dlehman)
  - Remove 'completed' property from Autopart spoke in text UI. (sbueno+anaconda)
  - Clean up code for input handling in TUI spokes. (sbueno+anaconda)
  - set_hostname should proceed only on DVD and live installations (vpodzime)
  - Don't use temporary file and move when writing out an ifcfg file (vpodzime)
  - Set hostname when leaving network spokes (vpodzime)
  - Keep file-naming convention with the Lightbox widget (vpodzime)
  - Let users configure autopart options in interactive text ks. (#1001061)
    (sbueno+anaconda)
  - Add parameters to format strings (dshea)
  - Fix pre-processing of files for xgettext (#1005644) (dshea)
  - Added a test to check for xgettext warnings (dshea)
  - Make sure XklWrapper isn't dumped to the anaconda-tb file (vpodzime)
  - Catch race of network device state vs reading its config properties (#980576)
    (rvykydal)


author: Brian C. Lane <bcl@redhat.com> - 20.16-1
changelog:
  - add pre-commit hook to run pylint (bcl)
  - Allow runpylint.sh to be passed files (bcl)
  - handle case of no ifcfg and no hostname (#1002737) (bcl)
  - Allow make targets to be run outside of $srcdir (dshea)
  - Fix the wildcard usage in automake files. (dshea)
  - Move the intltool Makefile rules into configure.ac (dshea)
  - Fix a format parameter mapping (#1007472) (dshea)
  - Check whether keyboard translations are stale (#972236) (dshea)
  - Fix the handling of xklavier strings. (dshea)
  - Center the Langsupport spoke's description (vpodzime)
  - Set minimal width request for the locales box (vpodzime)
  - Use constant for default keyboard layout (vpodzime)
  - Try to use VConsole keymap name as X layout (#1007359) (vpodzime)
  - Retranslate also layout indicator when retranslating BaseWindow (#1007087)
    (vpodzime)
  - Check ready state before baseRepo (#1007448) (bcl)
  - Fix po/Rules-extract so it doesn't remove itself (dshea)
  - Include LayoutIndicator and TimezoneMap to the Micsellaneous Widgets
    (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 20.17-1
changelog:
  - Fix handling of blank size specs in the custom spoke. (#1004903) (dlehman)
  - Block resize slider value changed handler when setting range. (#1007387)
    (dlehman)
  - Remove an unused import. (clumens)
  - Create the XklWrapper singleton in background (vpodzime)
  - Translate layout and switching options descriptions on the fly (vpodzime)
  - Improve XklWrapper's API (vpodzime)
  - Move upcase_first_letter function to iutil (vpodzime)
  - Remove the Layout class and things we don't need in XklWrapper (vpodzime)
  - Ignore the whole m4 directory (vpodzime)
  - Do not schedule hubs with no spokes available (#1006357) (vpodzime)
  - Retranslate language filtering placeholder texts (#1007090) (vpodzime)
  - Use pigz to create updates.img (vpodzime)
  - The Desktop class doesn't need to inherit from SimpleConfigFile. (clumens)
  - Fix yet another pylint error caught after the fact. (clumens)
  - Move all languages found by geoip to the top in Welcome spoke (mkolman)
  - Don't set ksdata.lang.seen to True if using default value (mkolman)
  - DNFPayload: reset the sack and repos on updateBaseRepo() (ales)
  - refactor: YumPayload: selectKernelPackage()->_select_kernel_package() (ales)
  - DNFPayload: mirrorlist can not be an empty string. (ales)
  - DNFPayload: display the download step in progressQ. (ales)
  - DNFPayload: logging the missed packages/groups. (ales)
  - DNFPayload: select kernel packages. (ales)
  - DNFPayload: log when the transaction process unexpectedly terminates. (ales)
  - DNFpayload: disable all NSS operations in RPM. (ales)
  - DNFPayload: keyerror in isRepoEnabled() (ales)
  - DNFPayload: implement selectEnvironment() (ales)


author: Brian C. Lane <bcl@redhat.com> - 20.18-1
changelog:
  - ProgressHub no longer exists in pyanaconda/ui/tui/hubs. (clumens)
  - Search all disk types for install media (#1004726) (dshea)
  - git commit check for ack flag on rhel branches (bcl)
  - Fix Lightbox for compositing window managers (#1008446) (dshea)
  - Add metalink support to yumpayload (bcl)
  - Make progress screen in text mode standalone spoke instead of hub (vpodzime)
  - Render the right arrow based on the widget direction (#1008397) (vpodzime)
  - Mirror the GUI if an RTL language is chosen (#1008397) (vpodzime)
  - Removed unused GUI elements (dshea)
  - Clean up what is and isn't translatable and how. (dshea)
  - Removed the exceptionsText constant (dshea)
  - Add comments for translators to TUI input strings (#854226) (dshea)
  - Use python-format on all intltool-extract strings (dshea)


author: Brian C. Lane <bcl@redhat.com> - 20.19-1
changelog:
  - tui ErrorDialog needs to be modal (#983316) (bcl)
  - Keyboard variant names may contain dashes (#1008730) (vpodzime)
  - Forbid "root" as a user or group name. (#968451) (dshea)
  - Set the password strength color based on strength (#965596) (dshea)
  - Fix the password confirmation match check (#1009907) (dshea)
  - Replace removed python modules with stubs in makeupdates (vpodzime)
  - Unlock encrypted partitions before finding installations (#901917) (vpodzime)
  - Network TUI: remove unused import, import nm. (rvykydal)
  - Network TUI: show the same status as in gui. (rvykydal)
  - Network TUI: don't traceback when applying config to device without link.
    (rvykydal)
  - Generate ifcfg VLAN_ID value for kickstart network --vlanid. (rvykydal)
  - Network TUI: fix updating of ksdata in apply. (rvykydal)
  - Network TUI: ignore slaves devices for configuration. (rvykydal)
  - Clean up ifcfg file handling. (rvykydal)
  - Check the validity of generated usernames in TUI (#965543) (dshea)
  - Behave better when PYTHONPATH is already set (dshea)
  - Decode keyboard layout descriptions as UTF-8 (#1009278) (dshea)
  - Filter out devices with no media from custom (#960794) (bcl)


author: Brian C. Lane <bcl@redhat.com> - 20.20-1
changelog:
  - Encrypt normal user passwords when doing text install. (#977732)
    (sbueno+anaconda)
  - Escape the status before setting it as markup (vpodzime)
  - network gui: do not crash on devices without settings (eg wireless)
    (#1010519) (rvykydal)
  - Make the keyboard layout preview dialog bigger (#1011140) (vpodzime)
  - Return switching options with the same order as shown (#1011130) (vpodzime)
  - Use a temporary directory for verifying ISO media (dshea)
  - Skip devices not controllable by blivet (#1009809) (dshea)
  - Add translation support to check_accelerators (dshea)
  - Make sure autopart type is handled deterministicaly in text mode (#1010453)
    (vpodzime)
  - Don't rely on X server adding empty variant for its defaults (#1011658)
    (vpodzime)
  - Make Keyboard spoke's status consistent with other statuses (#1011166)
    (vpodzime)
  - LiveImageKSPayload skip the parent class setup method (#1010500) (bcl)
  - Pass the actual format instead of Python built-in (#1009678) (vpodzime)
  - Don't allow using updates with non-default network sources (#1008028)
    (vpodzime)
  - Use Sphinx documentation format in nm.py. (rvykydal)
  - Changed the keyboard accelerator for iscsi "Retry Log In" (dshea)
  - Only fail on a missing firewalld command if the firewall is enabled
    (#1004976). (clumens)
  - Cleanup some pylint failures in the network module (bcl)
  - Add GtkNotebook support to the accelerators check. (dshea)


author: Brian C. Lane <bcl@redhat.com> - 20.21-1
changelog:
  - Remove another reference to log_picker. (clumens)
  - Turn spinner back on for configuration (bcl)
  - Use assertIsInstance in the kickstart version test. (clumens)
  - If the full device path is given in repo=hd:, still select it in the UI
    (#980479). (clumens)
  - Display newly created partitions without a mountpoint, too (#886039).
    (clumens)
  - Don't require pressing escape twice to kill the media check window (#965625).
    (clumens)
  - Fix display of weak password warning (#1011850) (dshea)
  - Fix the tui simpleline imports. (dshea)
  - Don't confuse users by misleading tooltip (#1011112) (vpodzime)
  - Assorted other pylint fixes for scripts and utils (dshea)
  - Pass string format arguments as paramters to logging (dshea)
  - Ignore the use of func_globals in a test case (dshea)
  - Fix issues in the AnacondaWidgets python wrapper (dshea)
  - Make exception handling more specific (dshea)
  - Remove unused imports and variables (dshea)
  - Remove unnecessary lambdas (dshea)
  - Remove obsolete files. (dshea)
  - Check whether the commit matches the tree (dshea)
  - Run pylint on all python files (dshea)
  - Don't use relative imports (dshea)
  - Use g_signal_handler_disconnect instead of g_object_disconnect (#1010486)
    (vpodzime)
  - Fixup Eula class (bcl)
  - Allow searching for keyboard layouts in English (#1009806) (vpodzime)
  - network: don't create ksdata for devices enslaved in GUI (#1011826)
    (rvykydal)
  - Allow a proxy to be set before the method is saved (#1012096) (dshea)
  - Export the pykickstart Eula command (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 20.22-1
changelog:
  - Only encrypt the TUI user password once (#1015220) (dshea)
  - Don't try to collect removed modules (vpodzime)
  - Moved the NFS nolock option into Payload._setupNFS (dshea)
  - Grab journalctl logs if there is no /tmp/syslog (vpodzime)
  - Pass layout and variant in specific format to Gkbd (#1011155) (vpodzime)
  - Translate the "Quit" string at the end of liveinst. (dshea)


author: Brian C. Lane <bcl@redhat.com> - 20.23-1
changelog:
  - Use Unicode in the TUI buffer strings (#1015620) (dshea)
  - DNFPayload: install DNF itself. (ales)
  - DNFPayload: direct conf.persistdir to the sysimage. (ales)
  - Add a tooltip to the container combobox (#975801) (bcl)
  - Use different colors for different message types. (dshea)
  - Exit on exception in the askVNC spoke (#962804) (dshea)
  - Don't skip the strength check if overriding a kickstart password (dshea)
  - Allow password spoke to be exited without password (#1004931) (dshea)
  - Re-check the password strength when the username changes (dshea)
  - Only call pwquality once per password. (dshea)
  - Use GUICheck checks for the root password strength (dshea)
  - Use constants for password check failure messages (dshea)
  - Use a constant to indicate GUICheck success (dshea)
  - Remove a redundant error property from UserSpoke (dshea)
  - Fix the usages of PWQError. (#1014405) (dshea)
  - Fix usage of GtkLevelBar in glade. (dshea)
  - Clean up callbacks in the user spoke. (dshea)
  - Removed an untrue portion of a doc comment (dshea)
  - Support for removing services from firewall needs newer PyKickstart (mkolman)
  - Add support for removing services from the firewall (#957809) (mkolman)


author: Brian C. Lane <bcl@redhat.com> - 20.24-1
changelog:
  - Clear bootDisk and bootloader stage info on errors (#1013482) (bcl)
  - Catch BootLoaderError when setting up bootloader (#1013474) (bcl)
  - Fix an incorrect formatting string in makeupdates. (clumens)
  - network: remove function we don't need anymore (rvykydal)
  - Don't translate constant strings. (dshea)
  - Take into account disk space when calculating swap suggestion (#1016673)
    (vpodzime)
  - DNFPayload: adapt to DNF change c3de85d6 of Base.install() error reporting.
    (ales)
  - DNFPayload: the new libcomps makes env.option_ids a list of GroupID objects.
    (ales)
  - Fix warning message when package version is not found in Koji (mkolman)


author: Brian C. Lane <bcl@redhat.com> - 20.25-1
changelog:
  - Don't use g_object_set on initialized objects. (dshea)
  - Remove the "other" tab in the network spoke. (dshea)
  - Fix duplicated id in custom.glade (dshea)
  - Correctly generate rescue initrd (#1013087) (bcl)
  - Refresh swap suggestion once we know which disks to use (vpodzime)
  - Initialize the kickstart install method (#1017614) (dshea)
  - Use correct format for raise in kickstart.py (bcl)
  - Add install-requires target to the Anaconda makefile (mkolman)
  - fix luksformat references (#1014493) (bcl)
  - kickstart: check for correct format (#1014545) (bcl)
  - Add checks for unexpanded macros. (dshea)
  - UIScreen doesn't necessarily have the ready property (vpodzime)
  - Print long widgets in a nice way (vpodzime)
  - Consider errno 5 I/O errors hardware faults (vpodzime)
  - Install kernel-lpae if supported (#1013015) (vpodzime)
  - Bump firewalld version (mkolman)


author: Brian C. Lane <bcl@redhat.com> - 20.26-1
changelog:
  - Install bootloader to loop device in disk image installations. (#1019502)
    (dlehman)
  - Don't try to configure a bootloader for s390 disk image installs. (#1019502)
    (dlehman)
  - Fix initramfs generation for disk image installations. (#1019502) (dlehman)
  - Save mountpoints specified for existing btrfs volumes. (#892747) (dlehman)
  - Add a command line option for disabling friendly multipath names. (#977815)
    (dlehman)
  - Remove en (dshea)
  - "Fix" the zSeries device filter "label" (dshea)
  - Replace placeholders with the strings from python (dshea)
  - Add and fix keyboard accelerators (dshea)
  - Check for labels with use_underline and no accelerator (dshea)
  - Support checking the translation of plural strings (dshea)
  - Specify a node id in check_accelerator exceptions (dshea)
  - BTRFS cannot hold swap, no need to care about fstab swaps (vpodzime)
  - Add ANACONDA_INSTALL_CLASSES to testenv.sh. (clumens)
  - Put a version on the DNF requirement. (clumens)
  - Revert "For now, ignore checking dnfpayload.py with pylint." (clumens)
  - Fix the alignment of the Network Time switch (#1019301) (dshea)
  - Tell blivet which swaps should appear in the fstab (#1011391) (vpodzime)
  - Put only newly created or reformated swaps to the new root (vpodzime)
  - Make code to get new devices reusable as property (vpodzime)
  - Grab journal only from the last boot (vpodzime)
  - DNFPayload: allow enable/disable calls for repos that do not exist. (ales)
  - Add shell spoke to s390x installations (vpodzime)
  - Put TUI spokes in common categories (vpodzime)
  - MountpointSelector is a widget, set its property properly (#1013612)
    (vpodzime)
  - Include the journal log on installed system (bcl)
  - DNFPayload: error handling and logging cleanups. (ales)
  - DNFPayload: reset the transaction goal on new package selection check. (ales)
  - DNFPayload: implement environmentGroups() (ales)
  - Some partition scheme is always selected (#1017435) (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 21.1-1
changelog:
  - Adds additional debug logging to yumpayload.py. (amulhern)
  - Handle invalid JSON in geoloc (#1021410) (dshea)
  - Revert "Only prompt for LUKS password if the user has chosen to configure
    automatically." (amulhern)
  - Add context support to check_accelerators (dshea)
  - Added translation contexts to the TUI. (dshea)
  - Added translation contexts to the GUI. (dshea)
  - Add support for context-based translations (dshea)
  - Reset checks on both password fields. (#1020580) (dshea)
  - Fix swaps added to fstab for noformat (gene)
  - Don't update hub's continue button and label for every spoke (#1020373)
    (vpodzime)
  - Add storage tests. (clumens)
  - Add option to select all hard drives in text mode. (#965580)
    (sbueno+anaconda)
  - BootLoaderError should not reset storage (#1019541) (bcl)
  - Only prompt for LUKS password if the user has chosen to configure
    automatically. (amulhern)
  - Remove an unused string (dshea)
  - Translate AM and PM (dshea)
  - Translate strings marked as translatable (dshea)
  - network gui spoke: use GDBus to obtain list of settings (#1018467) (rvykydal)
  - network: look for device settings also based on DEVICE value (#1017788)
    (rvykydal)
  - Fix liveinst to work with livemedia-creator (#1009711) (bcl)
  - Remove the button-label property on SpokeWindow. (clumens)
  - Log entering/exiting spokes and hubs in the GUI. (clumens)
  - Escape text inserted into markup strings (dshea)
  - Move markup out of translatable strings (dshea)
  - Move formating markup out of python where possible (dshea)
  - Use explicit children to set label attributes (dshea)
  - Turn on the image on the "Add a disk..." button. (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.2-1
changelog:
  - remove signal disconnect (#996899) (bcl)
  - Re-saved every glade file with glade-3.16.0 (dshea)
  - Fix pylint errors in network.py. (clumens)
  - Always use decimal notation for Size specs (dshea)
  - network kickstart: add support for devices configured in %pre (#1019796)
    (rvykydal)
  - network gui: make Configure button insensitive when no ap is selected
    (#1015212) (rvykydal)
  - Encode possible unicode objects before calling str() on them (vpodzime)
  - Fix a typo in function documentation (vpodzime)
  - Use more general status for installations from media (#1017703) (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 21.3-1
changelog:
  - Reset _proxyChange when a change is triggered (bcl)
  - Setup No Update checkbox correctly (#1016801) (bcl)
  - Fall back to closest mirror in source (#1016801) (bcl)
  - anaconda-dracut: fix ks failure with hd:<dev>:some/path.ks (wwoods)
  - Make sure lower bound for resize is applied. (#986575) (dlehman)
  - Use devicetree to resolve device specs in kickstart. (#1022206) (dlehman)
  - Disregard raid level combo when it isn't applicable. (#1022203) (dlehman)
  - Mountpoint is an attr of the format, not the device. (#892747) (dlehman)
  - Add bootloader execute before autopart (#1021258) (bcl)
  - Do error checking of repository names on "Installation Source" screen.
    (amulhern)
  - Avoid configure-event loops. (#1021511) (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.4-1
changelog:
  - Fix up a couple more pylint errors. (clumens)
  - Add check for Linux HFS+ ESP on Mac (#1010495) (bcl)
  - Update bootDrive info when storage config updated in text-mode. (#861018)
    (sbueno+anaconda)
  - Remove the special handling for en (dshea)
  - Ignore SIGINT (#1024822) (amulhern)
  - Don't show language twice for keyboard layouts (#1021907) (petersen)
  - Make Software spoke ready even if there is no repo (#1010348) (vpodzime)
  - Use decorator for methods that invalidate base repo cache (vpodzime)
  - Use cache for base repo if possible (vpodzime)
  - Make sure to actually set the autopart flag when needed. (#1023554) (dlehman)
  - Fix Gtk errors about list store columns (dshea)
  - Fix the layout up and down button sensitivies. (dshea)
  - Fix the Gkbd spec string for layouts with no variant (dshea)
  - pylint wants regexes with backslashes to be specified with 'r'. (clumens)
  - Add ack flag checking to makebumpver (bcl)
  - Correctly accept 'sshd' boot arg as alias for 'inst.sshd' (#924157) (wwoods)
  - Only eject CDROM devices we're actually using (#949919) (wwoods)
  - mem may not exist when it's printed out in these error messages. (clumens)


author: Brian C. Lane <bcl@redhat.com> - 21.5-1
changelog:
  - Fix spoke sorting issues in text-mode. (#929177) (sbueno+anaconda)
  - Send the continue click after the queue is empty (#1025347) (bcl)
  - No longer use summary screen visit to decide whether bootloader has been
    configured (#1025811) (amulhern)
  - Remove the bootloader line from the interactive kickstart file (#1025811)
    (amulhern)
  - Set bootloader default location to mbr in constructor (#1025811) (amulhern)
  - Remove column titles from the software spoke. (dshea)
  - Fix the selection of default groups (#1023263) (dshea)
  - Use the default yscale for the HubWindow alignment (dshea)
  - Fix kickstart block device resolution. (#1022206) (dlehman)
  - Specify query territory when getting language native name (vpodzime)
  - Get rid of trailing whitespace (vpodzime)
  - Export the right classes from the tui.spokes package (vpodzime)
  - Define newLayoutStore before it is used by the filter (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 21.6-1
changelog:
  - Fix typos in translation functions (dshea)
  - Put the cityCompletion back on the list of widgets (vpodzime)
  - Do not translate strings defined at the module or class level. (clumens)
  - Fix a couple places where we're doing % inside of _(). (clumens)
  - Add a custom pylint module to check i18n problems. (clumens)
  - Remove an unused import. (clumens)
  - Provide our own sorting functions for regions and timezones (#1025029)
    (vpodzime)
  - Set locale for our process (vpodzime)
  - Translate timezones in GUI (vpodzime)
  - network gui: add apply tooltip to Configure button (#1018471) (rvykydal)
  - Make dialog return code checking more robust (amulhern)
  - Show last 4 bytes of wwid (#1024966) (jstodola)
  - Handle focus changes of MountpointSelectors from outside (#975838) (vpodzime)
  - network: do not crash when device for network --device is not found
    (#1023829) (rvykydal)
  - Log continuing from hub if there are no spokes (vpodzime)
  - Updates to boot-options.txt document (#1026449) (amulhern)
  - No longer install anaconda user documentation (#1026449) (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 21.7-1
changelog:
  - Expand the use of ANACONDA_WIDGETS_DATADIR. (dshea)
  - Make thread manager operations atomic (#1029898) (mkolman)
  - Run pylint in multiple processes (vpodzime)
  - Fix how "changed" signal is emitted on the TreeSelection (vpodzime)
  - Pass biosdevname boot option to installed system (#1023609) (rvykydal)
  - network: update required NetworkManager version (team support) (rvykydal)
  - Use timing decorator for more actions (vpodzime)
  - Add test for the have_word_match function (vpodzime)
  - A nice decorator making Anaconda's GUI more responsive (vpodzime)
  - Short-circuit layouts matching (vpodzime)
  - Enforce upper bound for resize. (#1027947) (dlehman)
  - Fix some pylint problems in network.py. (clumens)
  - Add an updates location for the AnacondaWidgets overrides (dshea)
  - Fix typo (#1003591) (rvykydal)
  - network: call GDBus proxy methods like python (rvykydal)
  - network: add team support for kickstart %pre phase (#1003591) (rvykydal)
  - network: generate kickstart commands for team devices (#1003591) (rvykydal)
  - network: support for adding team devices (#1003591) (rvykydal)
  - network: display team devices in status (#1003591) (rvykydal)
  - network: add team support to kickstart (#1003591) (rvykydal)
  - Initialize the AddLayouts dialog in advance in the KeyboardSpoke (vpodzime)
  - Add function to map functions on items in the main thread (vpodzime)
  - Allow having unique thread names with given prefix (vpodzime)
  - Remove an unused and non-working leftover function resetResolve (vpodzime)
  - Always center dialogs shown on top of lightbox (vpodzime)
  - Set spokes' distribution and beta warning only once (vpodzime)
  - use deepcopy on ksdata method (#1028243) (bcl)
  - Change source spoke proxy handling to use local copy (#967805) (bcl)
  - Apply a little tweak to the VNC password length message. (clumens)
  - Match layouts with stripped accents in AddLayout dialog (vpodzime)
  - Sort layout descriptions properly (#1026238) (vpodzime)
  - Make AddLayout dialog persistent (vpodzime)
  - Use Sphinx syntax in the iutil module (vpodzime)
  - Warn if vnc passwd is longer than 8 chars (hamzy)
  - Don't try to unicode unicode strings (#1029109) (vpodzime)
  - Add tmpfs support (#918621) (mkolman)
  - Added a few things that autoscan complained about (dshea)
  - Actually use the config header we generate (dshea)
  - Redirect pylint stderr to stdout (dshea)
  - Fix the handling of files generated for xgettext (dshea)
  - Use gettext to process glade files. (dshea)
  - Always use $prefix in directory names. (dshea)
  - Pass --enable-gtk-doc to configure in distcheck (dshea)
  - Fix the liveinst install/uninstall hooks (dshea)
  - Clean up after intltool (dshea)
  - Add missing files to dist (dshea)
  - DNFPayload: tweak to the API changes in dnf-0.4.7. (ales)
  - Add tests for iutil (mkolman)


author: Brian C. Lane <bcl@redhat.com> - 21.8-1
changelog:
  - Fix geolocation on live installs (mkolman)
  - Ignore the pylint warning on importing GraphicalUserInterface. (clumens)
  - Fall back to text mode if GUI is not available (vpodzime)
  - Get rid of unused isys.isCapsLockEnabled function (vpodzime)
  - Don't rely on having zenity and require it only for GUI (vpodzime)
  - No longer need the Gconf2 package (vpodzime)
  - Split out anaconda's user interfaces into separate packages (vpodzime)
  - Do not include tzmapdata into the main package (vpodzime)
  - Create directories for stubs if they don't exist (vpodzime)
  - Do not try to fetch our own packages that will be built (vpodzime)
  - Remove the unused flags import from installclass.py. (clumens)
  - Fix logging of pylint-one output (bcl)
  - Do yum lock logging only with inst.debug or loglevel=debug (vpodzime)
  - Don't panic on installclasses failing with inst.debug (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 21.9-1
changelog:
  - Add a test for accesses of yum.preconf outside of _resetYum. (clumens)
  - Remove base_repo cache (#1011555) (bcl)
  - Make _yum.preconf setup atomic (#1028245) (bcl)
  - Remove threading from getBaseRepo handling (#1011555) (bcl)
  - If there are incomplete spokes, let the user know which (#1032801). (clumens)
  - tui: show Processing while source is busy (bcl)
  - tui: wait for threads before entering source and software (#1032823) (bcl)
  - clear errors when metadata is ok in tui source spoke (#1006570) (bcl)
  - Fix parallel pylint in distcheck. (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.10-1
changelog:
  - Cleanup anaconda.spec.in (bcl)
  - Handle non-leaf btrfs volumes with mountpoints. (#1016959) (dlehman)
  - Use en_spec for blivet Size spec strings with constant components. (#1029616)
    (dshea)
  - The gui and tui subpackages cannot be noarch (vpodzime)
  - Cleanup unused and overly complicated stuff in isys (vpodzime)
  - DNFPayload: tweak to the API changes in dnf-0.4.8 (ales)
  - Don't use cached packages with different release id (mkolman)


author: Brian C. Lane <bcl@redhat.com> - 21.11-1
changelog:
  - Use raid RAID level constants instead of mdraid RAID level constants.
    (amulhern)
  - Use level objects instead of level integer codes. (amulhern)
  - clear software environment (#1029536) (bcl)
  - Update source on errors (#1030997) (bcl)
  - Fix errors in kickstart.py. (dshea)
  - Update gettext.txt (dshea)
  - Don't allow bootloader and /boot on iSCSI on s390 (#1034222) (vpodzime)
  - Round float values coming from the Gtk stack (#1013586) (vpodzime)
  - Generate missing machine-id (bcl)
  - Fix problems reported by pylint. (dshea)
  - Add HDD ISO support for TUI (#1000327) (mkolman)
  - Use a directory in build tree for pylint data. (dshea)
  - Remove MOSTLYCLEANDIRS from Makefile.am (dshea)
  - fixup spec for fedup (bcl)


author: Brian C. Lane <bcl@redhat.com> - 21.12-1
changelog:
  - Handle cancelation of device resize in the custom spoke. (#1027947) (dlehman)
  - Disallow /boot on lvm until grub2 fully supports it. (#1036705) (dlehman)
  - Disallow /boot on btrfs subvolume until grubby supports it. (#864198)
    (dlehman)
  - Remove an empty initialize function. (clumens)
  - Move PathDict into pyanaconda/ui/__init__.py. (clumens)
  - Add one more directory for ignoring test log files (dshea)
  - Defer translation of device_type_name (dshea)
  - Disable pylint errors about gobject-introspection methods (dshea)
  - Remove unused variables (dshea)
  - Document the instl.multilib boot option (vpodzime)
  - Minor tweak of our driver disk documentation (vpodzime)
  - network: GUI, don't ask for wifi secrets upon Configure (#1033073) (rvykydal)
  - network: GUI, add support for virtual devices removing (#1030870) (rvykydal)
  - network: fix naming of slave ifcfg files from kickstart (#1036047) (rvykydal)
  - network: GUI, handle virtual devices (bond, vlan, team) properly (#1036047)
    (rvykydal)
  - Change how we test if the GUI is available in the anaconda script. (clumens)
  - Update boot-options.txt. (amulhern)
  - Omit /dev/sr* from list-harddrives (#1032500) (sbueno+anaconda)
  - Fix EditTUISpoke to operate only on visible entries (vpodzime)
  - Don't try to investigate empty string for unicode chars (#1035799) (vpodzime)
  - Fix issues reported by the check_pw_visibility test (vpodzime)
  - Add check testing visibility of password entries (vpodzime)
  - Put tests of .glade files into a separate directory (vpodzime)
  - Save a reference to the imported Xkl module for get_current_layout (dshea)
  - Fix the Makefile.am subdirs for widget data. (dshea)
  - Fix some pylint warnings. (clumens)
  - Switch to libtimezonemap for the timezone map. (dshea)
  - Set the _config_dialog property during __init__. (dshea)
  - Fix handling of long release ids (mkolman)
  - Store older valid packages in separate folder (mkolman)
  - Fetch older valid releases (mkolman)
  - Import Xkl only when really needed (vpodzime)
  - Global screenshot support (#1025038) (mkolman)
  - Require new version of python-blivet (vpodzime)
  - Hide password characters in iSCSI login fields (#1034202) (vpodzime)
  - Use format names instead of types in the resize dialog (vpodzime)
  - Do not write out the vconsole.keymap boot option (#1035316) (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 21.13-1
changelog:
  - Refresh environment addons on source change (#1033749) (bcl)
  - Fix selector device matching for unallocated partitions. (#1039292) (dlehman)
  - Rename the network config spoke a little bit. (clumens)
  - Don't encrypt device if container is encrypted (bcl)
  - network: add s390 options in ifcfgs generated from kickstart (#1031376)
    (rvykydal)
  - Remove enablement of whiteout/blackout plugins, and the requires on anaconda-
    yum-plugins. (notting)
  - Fix checking if we are collecting our module (vpodzime)
  - Remove an unnecessary continue statement in the potfiles check (vpodzime)
  - Use sys.exit instead of os._exit in the potfiles test (vpodzime)
  - List addons in exception report data (vpodzime)
  - Make Hub.storage and Spoke.storage a property (dshea)
  - Fix the botched helperization of StorageChecker (dshea)
  - Disable tmpfs in the GUI (#1039511) (mkolman)
  - Don't crash on NTP lookup without network (#1026079) (mkolman)
  - Don't rely on Gtk being importable for exception handling (vpodzime)
  - Support rnotes in SVG format (#1034407). (clumens)
  - Fix a couple warnings from -Werror=format-security (#1036989). (clumens)
  - Use abstract base classes for mixins. (dshea)
  - Display free space remaining in containers (#1035832). (clumens)
  - Make sure url and mirrorlist are not set at once (#1026834) (mkolman)
  - if rootfs is btrfs, add rootflags=subvol to kernel parameters (gene)
  - add ro to bootloader kernel parameters (gene)
  - Added missing entries to POTFILES.in (dshea)
  - Add a check that files with translatable strings are in POTFILES.in (dshea)
  - Fix the handling of renames in the pylint git hook. (dshea)
  - Remove startup-id from AnacondaBaseWindow. (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.14-1
changelog:
  - Fix the release notes image cycler. (#1043393) (dshea)
  - Do not schedule resize actions for non-resizing requests (#1039491)
    (vpodzime)
  - Use ceil for minSize in resize dialog (#1040012) (bcl)
  - Use integer numbers of megabytes in the Reclaim dialog (#1040012) (vpodzime)
  - fcoe gui: repopulate device tree only if device was actually added (#1039223)
    (rvykydal)
  - Exclude FCoE disks from local disks (#1039223) (rvykydal)
  - fcoe: repopulate devicetree after adding FCoE SAN (#1039223) (rvykydal)
  - Add initial 64-bit ARM aarch64 EFI support (#1034428) (dmarlin)
  - Rename network spoke header (mkolman)
  - Show the Shell spoke in debug mode (vpodzime)
  - Accept only .iso files from the IsoChooser dialog (#1015169) (vpodzime)
  - Just run the IsoChooser dialog lightbox (vpodzime)
  - Use libxklavier's new methods instead of our nasty hack (vpodzime)
  - Move atexit registration before running rescue mode (#1038855) (vpodzime)
  - Only display the addon separator if there's a reason to. (clumens)
  - Stop using deprecated gtk margin functions. (clumens)
  - Fix the check_accelerators srcdir path. (dshea)
  - Show msg in TUI if user attempts to create invalid username. (#965561)
    (sbueno+anaconda)
  - Fix up username checking regex a bit. (sbueno+anaconda)
  - Fix default device for ks=cdrom (#1042500) (bcl)
  - createUser is already in a chroot (#1038241) (bcl)
  - Skip checks on files that are not staged for commit. (dshea)
  - Allow catching exceptions from threads (vpodzime)
  - Enable warnings about abstract methods not overridden (dshea)
  - Provide empty methods to override abstract parent methods. (dshea)
  - Implement status in StandaloneSpoke. (dshea)
  - Move a bunch of abstract methods from Payload to PackagePayload (dshea)
  - Remove some methods from packaging.Payload. (dshea)
  - Disable abstract method warnings in intermediate abstract classes. (dshea)
  - Remove Personalization spoke (dshea)
  - Remove some vestigal code from an earlier version of GUICheck (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.15-1
changelog:
  - Use the new Gtk.ListBox for displaying environments and addons (#1039683).
    (clumens)
  - Display additional disk attributes in TUI storage spoke. (#1024760)
    (sbueno+anaconda)
  - Fix 'select all disks' logic in TUI storage spoke. (sbueno+anaconda)
  - Ignore the compile script (dshea)
  - network GUI: don't crash when wifi is activated in standalone spoke
    (#1046138) (rvykydal)
  - Use the right test for there being any storage actions. (clumens)
  - Only display the actions summary dialog if there are any actions (#1030511).
    (clumens)
  - Do not support kickstart+live installs (#1027160). (clumens)
  - We no longer directly use libnl (#1034830). (clumens)
  - Remove _transactionErrors from yumpayload.py. (clumens)
  - Move xhost handling to the xinit script (#1045280) (dshea)
  - Check for ready before baseRepo in completed (#1044985) (bcl)
  - Treat the output of vncpasswd as binary data, since it is (#1045119) (dshea)
  - Add iutil.exec* options for handling binary data (dshea)
  - Print a message and exit if a user attempts to upgrade via kickstart. (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.16-1
changelog:
  - Use blivet.size.Size for all size quantities. (dlehman)
  - make anaconda-shell (wwoods)
  - handle "ks=cdrom[:<path>]" on systems with multiple CDs (#1049237) (wwoods)
  - dracut: add when_any_cdrom_appears for cdrom autoprobe (wwoods)
  - dracut: minor shell cleanup (wwoods)
  - fix inst.noshell (#807703) (wwoods)
  - Error gracefully if we have a question in cmdline mode. (#869731)
    (sbueno+anaconda)
  - Verify that designated label can be set (#1038590) (amulhern)
  - Do not change sensitivity of label field (#1038590) (amulhern)
  - Make the clear icon functional in language spoke. (sbueno+anaconda)
  - Fix the translated pango markup check (dshea)
  - Remove iutil.strip_markup. (dshea)
  - Pass additional command-line arguments to pylint (dshea)
  - Fix and ignore markup warnings where appropriate (dshea)
  - Check that the Pango markup in glade files is valid (dshea)
  - Added a pylint module to check pango markup. (dshea)
  - Split the po-based translation code into a separate file. (dshea)
  - Fix bool parsing of boot options with inst. prefix (#1044391) (mkolman)
  - Use vc_keymap as X layout only if we get nothing from localed (#1048592)
    (vpodzime)
  - Warn user if entering LUKS password with non-ASCII characters (#1039168)
    (vpodzime)
  - Add back some erroneously removed set_use_underline calls (dshea)
  - Only show the "DATA" heading if there are data mount points under it.
    (clumens)
  - Don't allow the advanced user dialog to be saved with errors (dshea)
  - Move the add_check stuff into helper classes. (dshea)
  - Remove the UID and GID maximums. (#978846) (dshea)
  - Fix an invalid mnemonic widget reference in passphrase entry (dshea)
  - Added checks for some potential issues in glade files (dshea)
  - Remove scrot dependency for global screenshot support (mkolman)
  - Fix mnemonic widget reference id (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 21.17-1
changelog:
  - Test for DataHolder Class (#1034427) (bcl)
  - Use DataHolder for TUI nfs data (#1034427) (bcl)
  - Add DataHolder class (#1034427) (bcl)
  - Handle inst.{gpt,dnf,extlinux} using cmdline.getbool() (wwoods)
  - Drop unreferenced 'useIPv[46]' flag (wwoods)
  - Don't force shell on tty2 (#980062) (wwoods)
  - add comment about boot-options.txt (wwoods)
  - Add support for getting stage2 image from boot.iso (#1035514) (mkolman)
  - Various changes to handling of filesystem label setting (#1038590) (amulhern)
  - Fix translation context on the storage options dialogs. (clumens)
  - Fix problems going into custom partitioning with the new work flow. (clumens)
  - Don't show actions next to free space lines in the reclaim dialog (#1054208).
    (clumens)
  - If there's a label in the ISO device combo, put it on a new line (#1031727).
    (clumens)
  - Make the device name in a MountpointSelector less wide (#1048583). (clumens)
  - If a root password is set, don't show the spoke (#910355, #1041405).
    (clumens)
  - Check for certain disk attrs before trying to access them. (#1053055)
    (sbueno+anaconda)
  - Use gtk_get_locale_direction. (dshea)
  - Always run efibootmgr from ROOT_PATH (bcl)
  - A class for scheduling Gtk actions and running them all at once (vpodzime)
  - Remove some leftover float conversions. (dshea)
  - Use uint64 for the resize target size. (dshea)
  - Return program output as a string instead of a list (dshea)
  - Implement and use a function for one-off running Gtk actions (vpodzime)
  - Be more defensive when getting layouts and their variants (vpodzime)
  - Implement and use functions for conversion between keymaps and layouts
    (vpodzime)
  - Fix reset of existing device to its original size. (dlehman)
  - Don't disable checks for global at the module level. (dshea)
  - Clean up the pylint-false-positives. (dshea)
  - Remove pylint comments that are no longer necessary (dshea)
  - Allow pylint-false-positives to end with a newline (dshea)
  - Change storage widget visibility based on disks selected. (clumens)
  - Rename widgets in the two remaining options dialogs. (clumens)
  - Allow going to the reclaim dialog even for autopart (#1014671). (clumens)
  - Add the autopart type combo to custom storage (#1014671). (clumens)
  - Tweak DiskOverview spacing a little bit (#1014671). (clumens)
  - Add custom part and encryption buttons to the main storage spoke (#1014671).
    (clumens)
  - Remove the existing install_options1 dialog, rename the others (#1014671).
    (clumens)
  - Grow the spoke gradient image to fit the nav_area (#1035772). (clumens)
  - Additional completion checks in network spoke. (#1044571) (sbueno+anaconda)
  - Fix problems reported by pylint (dshea)
  - Decode potentially 8-bit strings in TUI windows (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.18-1
changelog:
  - Use validate_label to check whether label should be updated (#1038590)
    (amulhern)
  - Always reject label if the format exists (#1038590) (amulhern)
  - Make label field always sensitive (#1038590) (amulhern)
  - Save module list after initial module load (#1050352) (bcl)
  - Require gtk3 and glib2 documentation to build (dshea)
  - Rename get_widgets_datadir to anaconda_get_widgets_datadir. (dshea)
  - Include the annotation-glossary (dshea)
  - Set device.format.label field close to where we read it (#1056139) (amulhern)
  - Install the rpmrc file to the initrd.img (#1016004) (vpodzime)
  - Give users hint about VNC password restrictions (#1053546) (vpodzime)
  - Be more liberal in what is accepted as a size unit. (dshea)
  - Remove en_spec parameters from blivet.size.Size. (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.19-1
changelog:
  - Change the reclaim space button rules (#980496) (bcl)
  - Revert "Fix up username checking regex a bit." (dshea)
  - Fix a pylint-caught problem from my previous cherry-pick. (clumens)
  - Give priority to IPv4 addresses when showing VNC & SSH IP (#1056420)
    (mkolman)
  - Display custom part warnings/errors on the spoke itself (#975840). (clumens)
  - Fix listing threads that caused an error (vpodzime)
  - Do not add errors item for thread in advance (vpodzime)
  - Log exceptions before running exception handling (vpodzime)
  - Fix kickstart 'updates' command (#1056727) (wwoods)
  - Fix exitHandler loop deactivation (bcl)
  - Show hidden disk images (#1034996) (bcl)
  - Fix pylint errors (dshea)
  - Provide a maximum width to the betanag dialog. (clumens)
  - Don't include zero sized disks in the custom part UI either (#903131).
    (clumens)
  - Move the Quit button to the right and make it consistently sized (#1038802).
    (clumens)
  - "Delete All" on the reclaim dialog should not delete hdiso source (#980496).
    (clumens)
  - Add a scrollbar to the error dialog (#1021506). (clumens)
  - Change the product name we key off (#1055019). (clumens)
  - Another dracut pylint change. (dshea)
  - Fix page logic in driver selection (#1055333) (bcl)
  - Give users way to select DD ISO interactively (#1036765) (vpodzime)
  - Make network-fetched driver disk .iso files work (#1003595) (vpodzime)
  - Disable pylint messages too annoying to deal with. (dshea)
  - Fix unused variable warnings (dshea)
  - Remove unused imports (dshea)
  - Specify string format arguments as logging function parameters (dshea)
  - Remove the raidstart and raidstop commands (dshea)
  - Expand the reach of pylint (dshea)
  - Put Xorg on tty6 in accordance with Ancient Anaconda Tradition (#980062)
    (wwoods)
  - Fix the handling of kickstart NFS repos with options (#1045528) (dshea)
  - Skip empty layout-variant specifications when setting layouts (#1057442)
    (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 21.20-1
changelog:
  - makebumpver: Any failure should cancel the bump (bcl)
  - Add option help text for --image and --dirinstall flags (#1056791) (amulhern)
  - Update bumpver to allow Related bugs (bcl)
  - Fix up some pylint errors. (clumens)
  - If a user has been created, don't allow entering the user spoke (#1058564).
    (clumens)
  - Tweak passphrase wording a bit. (clumens)
  - Tweak the final progress messages to fit on the screen a little better
    (#1058463). (clumens)
  - Fix iscsi target selection checkbox in GUI (#1058653) (rvykydal)
  - network ks: allow setting only hostname with network command (#1051564)
    (rvykydal)
  - fcoe: add fcoe=<NIC>:<EDB> to boot options for nics added manually (#1040215)
    (rvykydal)
  - network GUI: ignore fcoe vlan devices (#1051268) (rvykydal)
  - Use an unused variable. (dshea)
  - Ignore an unused function warning on isys_init (dshea)
  - Remove unused isys files. (dshea)
  - Fix the handling of realloc failures. (dshea)
  - Run cppcheck on the C source files. (dshea)
  - Check RAID10 box for BTRFS (#1021856) (amulhern)
  - Make sure directory for DD extraction exists (vpodzime)
  - Handle --image arguments more thoroughly (#982164,#994488) (amulhern)
  - Remove the border from the custom part notebook. (clumens)
  - Style the Done button to make it more noticable (mizmo). (clumens)
  - Change the string used to test for serial console (#1054951) (dmarlin)


author: Brian C. Lane <bcl@redhat.com> - 21.21-1
changelog:
  - Move save_netinfo into a hook (#1048231) (bcl)
  - Cleanup log message for pylint (bcl)
  - kickstart user accounts should be locked by default (#1063554) (bcl)
  - pre-push hook checking bugzilla IDs on rhelX branches (vpodzime)
  - Make sure LUKS devices can say they have a key (#1060255) (amulhern)
  - Handle LUKS passphrase before doing sanity check (#1060255) (amulhern)
  - Remove some unnecessary resets (#1060255) (amulhern)
  - Do not consider no available LUKS passphrase an error in do_autopart
    (#1060255) (amulhern)
  - Adapt to new blivet.sanityCheck() return type (#1060255) (amulhern)
  - Adapt StorageChecker class for changed return type of sanityCheck (#1060255)
    (amulhern)
  - Add sanityCheck functionality back into AutoPart.execute() (#1060255)
    (amulhern)
  - Bump blivet version for changed sanityCheck() interface (amulhern)
  - UnmanagedDeviceError and UnknownConnectionError are in the nm module.
    (clumens)
  - blivet no longer has a protectedDevices property. (clumens)
  - network: adapt to changed handling of devices without carrier in NM
    (#1062417) (rvykydal)
  - driverdisk: Rename skip_dds to make pylint happy (bcl)
  - driverdisk: Use a single systemd service to start DD UI (#1035663) (bcl)
  - driverdisk: Add dd_args_ks handling to driver-updates (#1035663) (bcl)
  - driverdisk: Process kickstart driverdisk commands (#1035663) (bcl)
  - driverdisk: Handle kickstart driverdisk command (#1035663) (bcl)
  - driverdisk: Use getargs instead of the env variable (#1035663) (bcl)
  - Remove now-unused isys/devices.[ch]. (clumens)
  - Call finalize functions in parent classes. (dshea)
  - Fix crashes in the LayoutIndicator dispose function. (dshea)
  - Require systemd (dshea)
  - Remove the now-unused anaconda_spoke_header.png. (clumens)
  - Minor aesthetic cleanups (#1045250). (duffy)
  - Add a topbar design to SpokeWindows. (#1045250) (duffy)
  - Update the Aarch64 packages to include efibootmgr. (dmarlin)
  - Add a sidebar to the standalone and hub windows (#1045250) (duffy)
  - Allow specifying an environment in the kickstart file (#1050994). (clumens)
  - The autopart scheme combo should work for creating partitions manually, too.
    (clumens)


author: Brian C. Lane <bcl@redhat.com> - 21.22-1
changelog:
  - Remove app_paintable from a couple nav boxes (#1064708). (clumens)
  - Give a more correct error for missing groups/packages on exclude (#1060194).
    (clumens)
  - Fix some incorrect RPM macros in the spec file. (clumens)
  - Allow using globs and alternative paths for specifying boot drive (#1057282).
    (clumens)
  - Don't reset input check status when disabling a check (#1062273) (dshea)
  - Fix how an input check is disabled (#1062275). (dshea)
  - ListStore.remove expects an iter, not an int (#1062752). (clumens)


author: Brian C. Lane <bcl@redhat.com> - 21.23-1
changelog:
  - driverdisk: Parse all blkid output (#857248) (bcl)
  - Fix blkid output parsing and our output (vpodzime)
  - Don't use positional arguments to initialize Gtk objects (dshea)
  - Set mandatory property in network tui spoke. (#1064139) (sbueno+anaconda)
  - Disallow /boot on RAID on s390x. (#1027670) (sbueno+anaconda)
  - Remove a stray break statement (dshea)
  - Use devicetree.resolveDevice instead of udev_resolve_devspec. (#1047338)
    (dlehman)
  - Set ThreadManager.any_errors to be a property (dshea)
  - Error on "bootloader --location=partition" when using grub2 (#969095).
    (clumens)
  - Fix the handling of kernel parameters with no = (#1065704) (dshea)
  - Deal with a couple more "except Exception" lines. (clumens)
  - Fix pylint errors in the latest dnf-related commit. (clumens)
  - DNFPayload: pick the right FS as package download target. (ales)
  - DNFPayload: log import crashes. (ales)
  - DNFPayload: use dnf.exceptions.MarkingError. (ales)
  - Return the returned value in the fire_gtk_action (vpodzime)
  - Allow AddonData classes to parse options in the %addon line (dshea)
  - Pass ints to Gtk resize functions (#1065021) (bcl)


author: Brian C. Lane <bcl@redhat.com> - 21.24-1
changelog:
  - setup default environment in initialize (bcl)
  - Move environmentAddons into packaging (bcl)
  - Skip running efibootmgr for image and dir installations (#1067749) (bcl)
  - Move translatable format strings into python. (dshea)
  - Added a check for translatable format strings in glade. (dshea)
  - Use a single script to run the glade tests. (dshea)
  - Check that s390x LVM configuration is valid. (#873135, 885011)
    (sbueno+anaconda)
  - Re-apply disk selection on error in TUI storage. (#1056316) (sbueno+anaconda)
  - Properly retry package downloads (#924860) (mkolman)
  - Change the CSS class name of the sidebar (#1067049). (clumens)
  - Preserve ipv6.disable=1 on target system (#1040751) (wwoods)
  - Remove an unused import in driver-updates. (clumens)
  - Fix heredoc usage in generated /etc/grub.d/01_users (#1044404). (dcantrell)


author: Brian C. Lane <bcl@redhat.com> - 21.25-1
changelog:
  - pylint: Add a pile of new E1101 exceptions (bcl)
  - pylint: change disable-msg to disable (bcl)
  - Fix console for s390 and 'noshell' mode (#1070672) (wwoods)
  - Check that the addon selection state exists before reading it (dshea)
  - Set the name in the volume group store (dshea)
  - Don't ignore the directory of the driver disk iso file (vpodzime)
  - Set rpm macros in DNFPayload (dshea)
  - Implement %packages --instLangs (#156477) (dshea)
  - Set rpm macro information in anaconda-yum. (dshea)
  - Move the anaconda-yum exception handler (#1057120) (dshea)
  - Only run gtk actions in the gtk thread. (dshea)
  - Add createrepo Requires (#1016004) (bcl)
  - Fix a traceback gathering free space info for a container. (#1069854)
    (dlehman)
  - network: detect also fcoe vlan device names exceeding IFNAMESIZ (#1051268)
    (rvykydal)
  - DNFPayload: display the download progress on the hub. (ales)
  - driverdisk: Fix typo in error logging (#1016004) (bcl)
  - driverdisk: Create a repo for network drivers (#1016004) (bcl)
  - driverdisk: Catch blkid failure (#1036765) (bcl)
  - driverdisk: Ignore extra blkid fields (#1036765) (bcl)
  - We can't trust rhcrashkernel-param to give us newline-free text. (pjones)
  - Remove redundant _setCurrentFreeSpace() call (#1043763) (amulhern)
  - Enable python-coverage in anaconda (dshea)
  - Move the sidebar to the right for RTL languages (dshea)
  - Remove a bunch of unused includes and tests for headers (dshea)
  - Add a note about when and how to remove isys.sync (dshea)
  - Remove isys.isPseudoTTY (dshea)
  - Convert isys.isIsoImage to python code (dshea)
  - Focus the language search input by default (#973967) (dshea)
  - Ensure media being verified is always unmounted (dshea)
  - Write 'text'/'cmdline' in anaconda-ks.cfg in text/cmdline mode (wwoods)
  - text install -> text system (#1021963) (wwoods)
  - Support the 'skipx' kickstart command (wwoods)
  - let systemd decide when to start anaconda-sshd (wwoods)
  - Don't use tmux for inst.noshell (#1058607) (wwoods)
  - Fix a nitpick from bcl. (pjones)
  - Make rhcrashkernel-param get run on non-GRUB 2 platforms. (pjones)
  - Cast the blame appropriately when the kernel refuses efivars changes.
    (pjones)
  - Do not use shim.efi on ARMv8 aarch64 (#1067758) (dmarlin)
  - Handle missing environments specified through kickstart (#1067492). (clumens)
  - create_sparse_file in blivet now expects a Size object. (clumens)
  - Don't traceback when no size is given in kickstart (#1067707). (clumens)


author: Brian C. Lane <bcl@redhat.com> - 21.26-1
changelog:
  - Don't traceback, just log a warning if connection is unavailable (#1070928)
    (mkolman)
  - Remove unnecessary use_markup attributes. (dshea)
  - Add a check for unnecessary markup. (dshea)
  - Ignore the server keymap for spoke status if using VNC (#1045115) (dshea)
  - Call % outside of the translation (dshea)
  - Fix pylint errors about dangerous default values (dshea)
  - Typo fix (dshea)
  - driver-updates: skip iso selection with OEMDRV (#1066784) (bcl)
  - driver-updates: allow interactive mode to load multiple devices (wwoods)
  - driver-updates: add DoRefresh loop to select_iso() (#1066784) (wwoods)
  - driver-updates: add 'refresh' to selection_menu() (wwoods)
  - driver-updates: rework 'dd_finished' handling (wwoods)
  - driver-updates: refactor dd_scan (wwoods)
  - driver-updates: refactor menu to allow other options (wwoods)
  - Bump blivet Requires for DASD changes. (#1064423) (sbueno+anaconda)
  - Add GUI and TUI logic to handle unformatted DASDs. (#1064423)
    (sbueno+anaconda)
  - Show unformatted DASDs in the local disk store. (#1064423) (sbueno+anaconda)
  - Add dialog box to warn about formatting DASDs. (#1064423) (sbueno+anaconda)
  - Update disk refs when recovering from a devicefactory failure. (#1032141)
    (dlehman)
  - Add typelib and library paths to the test environment. (dshea)
  - Run pylint with NO_AT_BRIDGE=1 set in the environment (dshea)
  - pylint: Clean up accordion warnings (bcl)
  - Let Gtk pick the size for the isoChooserDialog (#973376) (dshea)
  - network kickstart: do not bind to MAC if SUBCHANNELS are present (#1070232)
    (rvykydal)


author: Brian C. Lane <bcl@redhat.com> - 21.27-1
changelog:
  - Don't disable anaconda repo on rawhide (bcl)
  - Set log level to debug when using an updates image (bcl)
  - driver-updates: accept burned driver discs (#1073719) (wwoods)
  - Do nothing if previously selected selector gets focus again (#1029798)
    (vpodzime)
  - Firstboot is deprecated and gone on Fedora 20 and anything newer (vpodzime)
  - Reraise the exception properly (vpodzime)
  - Set progress bar to 100 % in a different way (#1058755) (vpodzime)
  - Refresh after checkbox clicked (#1074188) (amulhern)
  - Use instclass.efi_dir when constructing the EFI path (dshea)
  - Add rescue kernels to the bootloader install list. (#1036349) (dshea)
  - Cover both possible ways that GUI WWID may have been set (#1074184)
    (amulhern)
  - Do not write out /etc/adjtime file on s390(x) (#1070748) (vpodzime)
  - Ignore the data model and just return self.environment (mkolman)
  - Software spoke can't be complete if the payload thread is running (mkolman)
  - DNFPayload: blivet.size.Size() only knows 'spec' kwarg now. (ales)
  - Specify string format arguments as logging function parameters (dshea)
  - Add missing changelog entries (bcl)


author: Brian C. Lane <bcl@redhat.com> - 21.28-1
changelog:
  - Get the DBus session bus address in a method (dshea)
  - Specify string format arguments as logging function parameters (dshea)
  - Inhibit the screen saver on live installs (#928825) (dshea)
  - Handle the dbus method call not returning anything. (dshea)
  - Convert errors raised during dbus connection to DBusCallError (dshea)
  - driverdisk: Show selection menu for network driver isos (#1075918) (bcl)
  - Write a modprobe blacklist (#1073130) (bcl)
  - Append cmdline arg values in BootArgs (#1073130) (bcl)
  - Wait for other threads to finish before sending ready (#1075103) (bcl)
  - set proxy related environmental variables (#854029) (bcl)
  - Fix pylint error in yumpayload. (sbueno+anaconda)
  - The custom spoke requires mountPointStore and mountPointCompletion, too.
    (clumens)
  - Make the lists of files to check consistent across all checks. (dshea)
  - Fix error handling in cmdline mode. (#1034773) (sbueno+anaconda)
  - Don't create bootloader entries for kdump initrd and kernel. (#1036086)
    (sbueno+anaconda)
  - Add a setting to network.py that got left out of the cherry-pick. (clumens)
  - Enable make check in %check and add the necessary BuildRequires (atodorov)
  - Make it obvious user is going to begin installation. (#975793)
    (sbueno+anaconda)
  - Move libtimezonemap requires to the anaconda-gui subpackage (vpodzime)
  - network: apply ks configuration to devices activated in initramfs (#1037605)
    (rvykydal)
  - Add support for kickstart --interfacename for vlans (#1061646) (rvykydal)
  - network: handle race condition of disappearing active connection (#1073424)
    (rvykydal)
  - Convert iter from filter model iter to backing store iter (#1074188)
    (amulhern)
  - Provide ways in kickstart to skip kernel and bootloader (#1074522). (clumens)
  - DNFPayload: apply the kickstart excludedList. (ales)
  - Only pylint files that are in the git working copy (dshea)
  - Move accordion population into a separate function (vpodzime)
  - Short-circuit testing if root has any devices (vpodzime)
  - Getting new devices is not enough cheap operation for being a property
    (vpodzime)
  - Hide and unhide the same set of disks in the Custom spoke (vpodzime)
  - Use GtkActionList when populating filesystem store (vpodzime)
  - Fix XDG_RUNTIME_DIR not set messages by creating one (dshea)
  - Make the ui_storage_logger reusable (vpodzime)
  - Decide on supported RAID levels in a better way (vpodzime)
  - Fix typo in the comment (vpodzime)
  - Add and use MountpointSelector's attributes we need (vpodzime)
  - Make code to get Size instance from user's input reusable (vpodzime)
  - Make getting raid level less hacky (vpodzime)
  - Implement a function to get container type name (vpodzime)
  - Make custom partitioning helper constants look as constants (vpodzime)
  - Simplify mountpoint validation and error reporting (vpodzime)
  - Simplify label validation and error reporting (vpodzime)
  - Move translated_new_install_name to the right place (vpodzime)
  - Rename the __storage attribute to a more propriate name (vpodzime)
  - Split out helper code from the Custom partitioning spoke (vpodzime)
  - The reset button should only be sensitive if there's something to reset.
    (clumens)
  - Confirm before resetting custom partitioning selections (#970093). (clumens)
  - DNFPayload: Add languageGroups(). (ales)
  - Use ROOT_PATH not /mnt/sysimage (bcl)
  - Override ROOT_PATH with environmental variable (bcl)
  - Import /etc/login.defs in libuser.conf (#979815) (dshea)
  - Fix environment group changes based on ListBox row activation (dshea)
  - DNFPayload: do not crash when an addon is unavailable. (ales)
  - Payloads: make DEFAULT_REPOS a part of the interface. (ales)


author: Brian C. Lane <bcl@redhat.com> - 21.29-1
changelog:
  - Add a Makefile target to create a set of empty .po files. (dshea)
  - os.path.exists -> os.path.lexists when checking for authconfig. (clumens)
  - Add support for tarfiles to liveimg kickstart command (bcl)
  - mountExistingSystem raises an exception with dirty FS (#1080210) (vpodzime)
  - Don't do yum lock logging when using updates.img (vpodzime)
  - Pass Size(0) instead of 0 to the ContainerDialog if no size is given
    (vpodzime)
  - Update the BaseWindow and HubWindow example UI fragments (dshea)
  - Convert GtkHBox and GtkVBox to GtkBox. (dshea)
  - Fix keyboard accelerator collisions from former stock buttons (dshea)
  - Set the secret agent icon in the glade file (dshea)
  - Remove stock labels and icons. (dshea)
  - Run the pykickstart version test on the commands in parse-dracut (dshea)
  - Don't reimport os - it's imported very early on. (clumens)
  - Use an alternative image if logo is missing (mkolman)
  - Update parse-kickstart for the new bootloader command. (clumens)
  - Make sure the error info message starts on a new line (vpodzime)
  - Define two env variables removing useless warnings (vpodzime)
  - Check boot args for None (#1075918) (bcl)
  - Revert "Enable make check in %check and add the necessary BuildRequires"
    (dshea)
  - Fix the argument list passed to the payloadInitialize thread (#1079628)
    (dshea)
  - Fix filtering the _storage_playground out (vpodzime)
  - Sync up step counts in install.py with reality. (clumens)
  - Avoid the "unable to init server" message. (dshea)
  - Do not attempt to run authconfig if it doesn't exist. (clumens)
  - Allow skipping installation of the core group, if asked for in kickstart.
    (clumens)
  - Drop the vconsole.font boot arg (#1074113) (vpodzime)


author: Brian C. Lane <bcl@redhat.com> - 21.30-1
changelog:
  - Add support ppc64le (hamzy)
  - Validate proxy URLs (dshea)
  - Provide feedback for invalid NTP hostnames. (dshea)
  - Use GUIDialogInputCheckHandler in the advanced user dialog (dshea)
  - Add a new InputCheck status for silent failures. (dshea)
  - Add an InputCheckHandler subclass for dialogs. (dshea)
  - Generalized and improved the proxy URL parsing regex (dshea)
  - Update makebumpver for the newer python-bugzilla on rawhide. (clumens)
  - network: don't crash on virtual devices turned off (#1080640) (rvykydal)
  - network: don't pop HWADDR twice for vlan on s390 (#1061646) (rvykydal)
  - Make safe_dbus module's functions less 'safe' (vpodzime)
  - Add a list of cmdline args that append instead of replace (#1073130) (bcl)
  - safe_dbus: Don't export DBus connection addresses as variables (walters)


author: Brian C. Lane <bcl@redhat.com> - 21.32-1
changelog:
  - Refactor the code setting up the device type combobox a method (vpodzime)
  - Rename 'swap' variable to 'is_swap' to better express its meaning (vpodzime)
  - Refactor out the code setting up the fstype combobox into a method (vpodzime)
  - Refactor the code updating info about device container into a method
    (vpodzime)
  - Remove the default None value from the addPage's cb argument (vpodzime)
  - Make on_updates_settings_clicked timed callback (vpodzime)
  - Rename the callback for updating mountpoint settings (vpodzime)
  - Hook up the GUI test so it's run as part of "make check". (clumens)
  - Skip running pylint on files containing "skip-file". (clumens)
  - Add comments to the kickstart tests. (clumens)
  - Add the beginnings of an automated GUI test suite. (clumens)
  - Add accessibility information to the user spoke. (clumens)
  - Add accessibility information to the root password spoke. (clumens)
  - Add accessibility information to the progress hub. (clumens)
  - Add accessibility information to most of the widgets on the storage spoke.
    (clumens)
  - Add enough accessibility information to the network spoke for livecds.
    (clumens)
  - Add accessibility information to the keyboard spoke. (clumens)
  - Add accessibility information to the date & time spoke. (clumens)
  - Add a script and base kickstart file for making a dogtail-enabled livecd.
    (clumens)
  - Add accessibility information to the welcome spoke and summary hub. (clumens)
  - Add accessibility information to some of our widgets. (clumens)
  - Don't use dhcp ntpservers for dir or image installation (bcl)
  - Implement and use decorator for logging UI storage actions (vpodzime)
  - Refactor out the code doing device reformat into a function (vpodzime)
  - Refactor out the code handling encryption change into a function (vpodzime)
  - Fix variable name when logging new fstype (vpodzime)
  - Make it possible to override translation domain in GUIObjects (#1040240)
    (mkolman)
  - Refactor out the code for handling device size change into a function
    (vpodzime)
  - Refactor out the code for bounding size into a function (vpodzime)
  - Refactor code for reverting device reformat into a function (vpodzime)
  - Make the code changing an existing device more compact (vpodzime)
  - Comment the part of the code changing an existing device (vpodzime)
  - Do device change logging in one place where possible (vpodzime)
  - Pass information about old and new device as a dictionary (vpodzime)
  - Move code attempting to replace device into a separate function (vpodzime)
  - Mountpoint validation should only care about the new fs type (vpodzime)
  - Make size properties refreshing reused code (vpodzime)
  - Use generator instead of list for auxiliary old_disk_names variable
    (vpodzime)
  - Remove and unused variable in Custom spoke (vpodzime)
  - Refactor mountpoint configuration validation out from _save_right_side
    (vpodzime)
  - Don't overload selectorFromDevice function (vpodzime)
  - Use dir_tree_map for the cleanPStore function (vpodzime)
  - Check xconfig before setting the installed displaymode (dshea)
  - DNFPayload: call close() when done with the Base. (ales)
  - Do not try to get "" translated (vpodzime)
  - Use for-cycle else: branch instead of extra variable (vpodzime)
  - Have mountpoint descriptions defined in a dictionary (vpodzime)
  - Uppercase global constants in the Custom spoke (vpodzime)
  - Use cannonical RAID level names when populating RAID stores (vpodzime)
  - No RAID level (RAID level None) is a valid choice for LVM(ThP) (vpodzime)
  - LVM Thin Provisioning supports the same RAID levels as plain LVM (vpodzime)
  - Only block the password/user spokes if data was given in kickstart (vpodzime)
  - Disable a pylint error message for now. (clumens)
  - Suppress selinux error log when using default (#1083239) (bcl)
  - Use the AnacondaWidgets python gi-overrides for pylint (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.33-1
changelog:
  - Add an option to copy translation files to an updates.img (dshea)
  - Set the selinux state from the command line (#784828) (dshea)
  - Remove a whole bunch of pylint false positives (dshea)
  - Ignore more informational messages printed by pylint pragmas (dshea)
  - Use more wildcards in the tests dist_ variable (dshea)
  - Make sure the idx variable is used instead of the old found variable
    (vpodzime)
  - Disable a false positive from pylint (dshea)
  - Only run dialogs in the enlightbox context (vpodzime)
  - Separate code for finding item in containers combo and processing it
    (vpodzime)
  - Check Update Settings button sensitivity when saving changes in one place
    (vpodzime)
  - Only save changes if needed when adding mountpoint (vpodzime)
  - No need to call bool() on a boolean expression result (vpodzime)
  - Give names to some magic tuples, make them reusable and reuse them (vpodzime)
  - Add DEVICE_TYPE_DISK's text description to the mapping (vpodzime)
  - Move a few constants and mappings to the storage_utils module (vpodzime)
  - Split long label's string into two lines (vpodzime)
  - Don't rely on the ordering of autopart types in the combobox (vpodzime)
  - Only save changes if there are any changes to be saved (vpodzime)
  - Add device type constants to the device type combobox's store (vpodzime)
  - Change some anaconda-yum DEBUGs to be more informative (bcl)
  - Change Proxy Add Button to Ok (bcl)
  - Display a message for missing required packages and groups (#1064565) (dshea)
  - Fix issues with the errorHandler callback arguments (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.34-1
changelog:
  - Improve the "adding yum repo" message structure (mkolman)
  - Fix missing log message about adding a repository (#1089297) (mkolman)
  - Ignore use of eval warnings. (dshea)
  - Specify string format arguments as logging function parameters (dshea)
  - New encrypted state is the dialog's encrypted attribute (vpodzime)
  - Use human readable sizes with two decimal spaces in the GUI (vpodzime)
  - Make the LUKS unlock callback a timed action (vpodzime)
  - Hitting ENTER in the LUKS passwd entry should click the Unlock button
    (vpodzime)
  - Block leaf device encryption if container is encrypted consistently
    (vpodzime)
  - Do not remove the replacing item, remove the replaced one instead (vpodzime)
  - Give include_btrfs variable a better name (vpodzime)
  - Make the _resolve_btrfs_restrictions method's code nicer (vpodzime)
  - Refactor the btrfs magic into a separate method (vpodzime)
  - Switch the condition in long if-else statement (vpodzime)
  - Give an opaque condition a better name explaining its real meaning (vpodzime)
  - Refactor out the code for removing empty parents (vpodzime)
  - Use the (vpodzime)
  - Refactor out the code for adding device/mountpoint into a method (vpodzime)
  - Relabel /home partition if using and existing one (#1087736) (vpodzime)
  - Don't forget to call os._exit() in the child process (vpodzime)
  - users: Add root= keyword argument to set{User,Root}Password (walters)
  - users: Deduplicate code to fork()+chroot() (walters)
  - gui/spokes/software: Enable iff payload is PackagePayload (walters)
  - Use descriptive pylint messages instead of numbers. (clumens)
  - Add input validation to the source spoke. (dshea)
  - Remove the tests for duplicate and invalid repo names (dshea)
  - Expand the proxy URL validation. (dshea)
  - Convert the repository name test into a regex (dshea)
  - Add a remove_check method for InputCheckHandler. (dshea)
  - Use ID columns in the protocol combo boxes (dshea)
  - Added a link to a bug about the user data in glade problem. (dshea)
  - Remove the top and bottom padding from source spoke action area (dshea)
  - Re-add a false-positive for the GLib module (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.35-1
changelog:
  - Use format strings in the new kickstart error message translations. (clumens)
  - Mark kickstart errors as translatable, and hopefully make them more useful
    too. (clumens)
  - install: Move Payload postInstall() after bootloader (walters)
  - iutil: Transparently redirect anyone who asks root=/mnt/sysimage to sysroot
    (walters)
  - Fix the way categories are handled in text mode. (sbueno+anaconda)
  - Move GUI-specific helper classes to a separate module (#1091542) (dshea)
  - Fix license in parse-kickstart (mkolman)
  - main: Set flags.extlinux if extlinux is used in interactive-defaults.ks
    (walters)
  - anaconda.service: Set GIO_USE_VFS=local (walters)
  - Use a gettext context where necessary when retranslating (#1091207) (dshea)
  - Update makebumpver for python-bugzilla 1.0.0 (bcl)
  - Skip source and software spoke in text live installations (#1092763) (bcl)
  - Add correct kernel params if rootfs is btrfs on s390x. (#874622)
    (sbueno+anaconda)
  - Don't crash on anaconda-yum output containing multiple colons (#1092441)
    (mkolman)
  - Revert chrooting when setting user/root password (vpodzime)
  - network: fix device configuration in text mode (#1058336) (rvykydal)
  - Change order in which packages/groups are selected/excluded (#1091952)
    (vpodzime)
  - Check the correct button when saving changes in the Custom spoke (#1090786)
    (vpodzime)
  - Fix unloading modules in driver-updates (#1085099) (wwoods)
  - Re-saved some of the glade files with a newer version of glade. (dshea)
  - Add viewports for the ListBoxes in the software spoke. (dshea)
  - Extend format string checks to translated format strings. (dshea)
  - Fix typo in nm_is_connected method check. (rvykydal)
  - iutil: Introduce getSysroot()/getTargetPhysicalRoot(), use instead of
    ROOT_PATH (walters)


author: Brian C. Lane <bcl@redhat.com> - 21.36-1
changelog:
  - Switch to adwaita-icon-theme (kalevlember)
  - Hook up the TUI categories to autoconf/make. (#1095220) (dshea)
  - Fix the object type specifying argument name for findActions (vpodzime)
  - Remove keyword args 'ignoreErrors' from umountFilesystems() call. (amulhern)
  - Updates for new blivet.size.Size.__new__ interface. (amulhern)
  - Change uses of 'format' keyword param to 'fmt' keyword param (amulhern)
  - Update devicetree.findActions invocations to match blivet interface change
    (amulhern)
  - Bump blivet version to ensure next four patches get the right interface.
    (amulhern)


author: Brian C. Lane <bcl@redhat.com> - 21.37-1
changelog:
  - Chain up to parent size_allocate functions in our standalone widgets.
    (clumens)
  - Format the help text to properly fit to the terminal window (mkolman)
  - Call getPossiblePhysicalExtents() only once (vpodzime)
  - Default PE size to blivet's default when requested from kickstart (#1098139)
    (vpodzime)
  - A couple of anaconda whitespace fixes (mkolman)
  - Replace the deprecated has_key() by in (mkolman)
  - Disable pylint errors on NetworkData in the new network_test.py. (clumens)
  - Tweak borders on the filter UI. (clumens)
  - network: add tests (rvykydal)
  - network: don't use ifcfg PREFIX when generating ipv6 dracut args (rvykydal)
  - network: cleanup - remove ksdevice variable (rvykydal)
  - Horizontally center the user creation spoke contents. (clumens)
  - Un-indent the reclaim space checkbox. (clumens)
  - Remove the RAID page from the filter UI. (clumens)
  - install -> installation in a string on the source spoke. (clumens)
  - Switch Anaconda to argparse (mkolman)
  - rpmostreepayload: Use systemd-tmpfiles rather than handrolling mkdir
    (walters)
  - Add some padding to the custom partitioning note. (dshea)
  - Wrap the custom partitioning note (#1031850) (dshea)
  - Make an ostree string easier for translators to deal with. (clumens)
  - Fix the gettext warnings test for VPATH builds (dshea)
  - network: fix crash on empty ksdevice boot option (#1096846) (rvykydal)
  - Add RPMOSTreePayload (walters)
  - bootloader: Allow extlinux loader configuration to handle RPMOSTreePayload
    case (walters)
  - install: Handle distinct physical root/sysroot (walters)
  - parse-kickstart: drop "mtu=" args (wwoods)
  - Drop workaround for old dracut BOOTIF+ip problem (wwoods)
  - Fix behavior (and docs) for ks=nfs:<path>/ (#1094645) (wwoods)
  - Allow non-ASCII characters in passwords (#960837) (dshea)
  - Use a separate label for passphrase warnings. (dshea)
  - Move more of the passphrase dialog into the glade file. (dshea)
  - Don't add redundant grub installs if stage1 is not a disk (dshea)
  - Let the user continue on bootloader errors (#1006304) (bcl)
  - Fix the parsing of NFS addon URLs (#966240) (dshea)
  - Remove redundant import (mkolman)
  - Don't overwrite function argument when parsing help texts (mkolman)
  - Return CLI help text at once (mkolman)
  - Fix typo in previous commit adjusting to blivet API change. (dlehman)
  - Adjust for movement of functions from examples into blivet proper. (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 21.38-1
changelog:
  - Parse boot options before parsing CLI options (#1101341) (mkolman)
  - Check that bootloader devices are configured before validating (#1100928)
    (dshea)
  - network: use IpInterface only for activated devices (#1101781) (rvykydal)
  - Enable LVM Thin Provisioning in text mode (vpodzime)
  - Remove the executable bit from anaconda.spec.in. (clumens)
  - Fix the nm test for big-endian results (dshea)
  - Fix issues with auto* and version.py (dshea)
  - Allow file:// url handler in --repo arg (bcl)
  - Ignore deprecation warnings for atk_role_register (dshea)
  - Handle renames in makeupdates. (pjones)
  - Move Anaconda version detection from isys to Python code (mkolman)
  - network: use IpInterface instead of Interface (#1058906, #1029214) (rvykydal)
  - network: don't modify network config for dirInstall and imageInstall
    (rvykydal)
  - network: remove redundant image install guard (rvykydal)
  - network: add first tests for nm.py (rvykydal)
  - network: consolidate setNetworkOnbootDefault (rvykydal)
  - Set ONBOOT=yes for the device used for installation (#1002544). (rvykydal)
  - Use proper data for autopart type initialization (vpodzime)
  - Line up the right side of the FCOE dialog. (clumens)
  - Use default_width and _height on dialogs instead of _request. (clumens)
  - Remove the border around the refresh storage dialog's button. (clumens)
  - Short-circuit initialization when printing out Anaconda version (mkolman)
  - Make print statements Python 3 compatible (mkolman)
  - Fix the handling of set_const options pulled in from the boot cmdline (dshea)
  - Fix the modify software tooltip on the installation options dialogs.
    (clumens)
  - Better visually distinguish TUI spokes states (vpodzime)
  - Reset the text direction as soon as the locale is changed (dshea)
  - Show errors from the displayed mountpoint when exiting the custom spoke
    (dshea)
  - Check that container names input by the user are valid (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.39-1
changelog:
  - eu_ES has been dropped from the supported languages (bcl)
  - Change 'elif encrypted' statement to 'else' statement. (amulhern)
  - Work around a parsing bug in GtkBuilder (dshea)
  - Don't uppercase the size values in the disk shopping cart. (clumens)
  - Display the sentence about being able to reuse partitions even without roots.
    (clumens)
  - Allow a couple more keyboard shortcuts on the custom part spoke. (clumens)
  - Reword the close button on the software spoke's error dialog. (clumens)
  - Fix up quoting around passing args to anaconda in the gui test. (clumens)
  - Don't hide a serious issue (vpodzime)
  - Move autopart choices to one place and use them in both GUI and TUI
    (vpodzime)
  - Define default autopart type as a constant (vpodzime)
  - Use enumerate() instead of getting indices of iterated items (vpodzime)
  - Preserve net.ifnames cmdline arg (#1102401) (bcl)
  - Revert the dialog sizing chunk from resize.glade. (clumens)
  - Update GUI tests for changes in gtk/atk/anaconda/whatever. (clumens)
  - Fix gui/runtest.sh to work under either "make check" or being run manually.
    (clumens)
  - Add a -c argument to the ksflatten invocation. (clumens)
  - Do basic logging setup when short circuiting the normal Anaconda init
    (mkolman)
  - Fix boot option warning string formatting (mkolman)
  - always rescan for vmlinuz if rescueKernelList (gczarcinski)
  - move new-kernel-pkg rpmposttrans to end of install (gczarcinski)
  - allow /boot on btrfs subvol or filesystem (gczarcinski)
  - Allow /boot on LVMlv (gczarcinski)


author: Brian C. Lane <bcl@redhat.com> - 21.40-1
changelog:
  - fedora-welcome: Correct an icon name after the switch to Adwaita
    (kalevlember)
  - Pass/check displaymode in collect_categories and collectCategoriesAndSpokes.
    (sbueno+anaconda)
  - Add help texts to some Anaconda CLI options (mkolman)
  - Don't install implicitly added but explicitly excluded packages (#1105013)
    (vpodzime)
  - Update configure, make files, and PO files with new category changes.
    (sbueno+anaconda)
  - Fix up collectCategoriesAndSpokes function. (sbueno+anaconda)
  - Update all relevant UI files with new category path. (sbueno+anaconda)
  - Move categories to pyanaconda.ui.categories. (sbueno+anaconda)
  - Allow testing a regular install from the live environment. (clumens)
  - Make sure /var/log/anaconda gets copied under the right root. (clumens)
  - format.setup in blivet takes only kwargs. (clumens)
  - Tweak spacing in the other storage options grid. (clumens)
  - Remove the dlable option (mkolman)
  - change default for grub2 save_entry to 0 (gczarcinski)
  - Revert "Refresh after checkbox clicked (#1074188)" (dshea)
  - Move assureLogoImage to GraphicalUserInterface (#1102238) (dshea)
  - If we cannot activate keyboard, at least populate the missing items
    (#1104541) (vpodzime)
  - network: generate dracut arguments also for IPADDRn ifcfg values (#1103571)
    (rvykydal)
  - Memoize the results for *RaidLevelsSupported() functions (amulhern)
  - RAID related changes for custom spoke. (amulhern)
  - Bump required blivet version. (amulhern)
  - Make parse-kickstart aware of the %addon section (#1083002) (vpodzime)
  - Revert "Work around a parsing bug in GtkBuilder" (dshea)
  - Fix a typo in one of the bootloader installation warning messages (#1103410)
    (mkolman)
  - Don't require network in standalone spoke for media installs (#1066807)
    (rvykydal)


author: Brian C. Lane <bcl@redhat.com> - 21.41-1
changelog:
  - Use /usr/lib* in updates images. (dshea)
  - Fix the paths we check for spokes. (sbueno+anaconda)
  - Remove the kbdtype option (mkolman)
  - Remove the noipv4 option (mkolman)
  - Remove the autostep option (mkolman)
  - Remove the disused nofb option (mkolman)
  - Remove the module option (mkolman)


author: Brian C. Lane <bcl@redhat.com> - 21.42-1
changelog:
  - Adjust the ui package paths to find hubs and spokes (bcl)
  - Change emphasis from subvolumes to snapshots in removal warning. (dlehman)
  - Reflect the fact that some block devices cannot be reformatted. (dlehman)
  - Use StorageDevice.direct to detemine if a device is directly accessible.
    (dlehman)


author: Brian C. Lane <bcl@redhat.com> - 21.43-1
changelog:
  - Allow NFS addon repos (#985080) (dshea)
  - Add --disklabel support to clearpart (#1078537) (bcl)
  - Replace redundant ifs with direct assignments to the anaconda variables
    (mkolman)
  - Replace ifs when assigning option values to flags where possible (mkolman)
  - Use True/False instead of 1/0 for flags (mkolman)
  - Store auto gui results in the same directory as the test itself. (clumens)
  - Use whatever network device was used to start installation. (clumens)
  - Ignore more deprecation warnings. (dshea)
  - Add help texts for the dmraid and nodmraid options (mkolman)
  - Use True instead of 1 for the dmraid flag default value (mkolman)
  - Add help texts for the ibft and noibft options (mkolman)
  - Use True instead of 1 for the ibft flag default value (mkolman)
  - Remove the iscsi and noiscsi options (mkolman)
  - Add a new log level 'lock' for _yum_lock (bcl)
  - Replace uses of gtk-missing-image (dshea)
  - Improve the SpokeSelector icon error reporting. (dshea)


author: Brian C. Lane <bcl@redhat.com> - 21.44-1
changelog:
  - Fix storage checker docstring (bcl)
  - Modify --dirinstall to take a path (bcl)
  - Drop ROOT_PATH, add a method to set it (bcl)
  - Call setUpBootLoader in custom autopart (#1086811) (bcl)
  - Remove the noipv6 Anaconda option (mkolman)
  - Remove the -s/--script Anaconda option (mkolman)
  - Make rescue_mode part of flags, hence more publicly available (#1090009)
    (amulhern)
  - Check host filesystem space for dirinstall (bcl)
  - Remove the viewport from the addon repo tree view (dshea)
  - Add a check for GtkScrollables contained in GtkViewports (dshea)
  - Enable rubber-banding in the disk tree views (dshea)
  - Make the configure mount point dialog taller. (#924182) (dshea)
  - Add the disk TreeViews directly to the scrolled windows (dshea)
  - Opened up custom_storage_helpers.glade and hit Save (dshea)
  - Add help texts for more Anaconda CLI options (mkolman)
  - Remove the targetarch Anaconda option (mkolman)
  - Add anaconda_options.txt to makeupdates (dshea)
  - Allow the location of anaconda_options.txt to be overridden (dshea)
  - Remove an unused import. (dshea)
  - Remove the headless Anaconda option (mkolman)


author: Brian C. Lane <bcl@redhat.com> - 21.45-1
changelog:
  - Switch to tty1 if we get an exception before meh is setup (dshea)
  - Remove surprises from X startup. (dshea)
  - Import KS_MISSING_IGNORE from pykickstart.constants in DNF payload (mkolman)
  - Import Pykickstart constants directly (mkolman)
  - Switch error exit codes to 1 (bcl)
  - Add help texts for the remaining Anaconda options (mkolman)


author: Brian C. Lane <bcl@redhat.com> - 21.46-1
changelog:
  - Ignore an error from pylint incorrectly analyzing types in dbus-python
    (dshea)
  - Remove the Lightbox widget (dshea)
  - Implement the lightbox in MainWindow (dshea)
  - Added a method to create new GdkPixbufs from in-memory data (dshea)
  - Add a delete-event handler for the main window (dshea)
  - Add a window to manage Anaconda screen transitions. (dshea)
  - Add a class BaseStandalone. (dshea)
  - Increased the version of anaconda-widgets to 3.0 (dshea)
  - Use globs for the anaconda widgets library paths (dshea)
  - Remove the custom accelerators from custom storage. (dshea)
  - Add a couple more deprecation warning ignores (dshea)
  - Use a dict for string substitutions in a /boot/efi message. (clumens)
  - Use the right index for selecting region (#1114234) (vpodzime)
  - Add autopart --fstype support (#1112697) (bcl)
  - Patches to allow /boot/efi to be RAID1 (#788313) (amulhern)
  - Bump blivet version for succeeding commit. (amulhern)
  - Map our log levels to syslog log levels (bcl)
  - makeupdates: Put systemd files under /usr/lib/ (bcl)
  - Make octal literals Python 3 compatible (mkolman)
  - Use the built-in next() function for generators (mkolman)
  - Make reduce function usage Python 3 compatible (mkolman)
  - Use createrepo_c in place of createrepo (mkolman)


author: Brian C. Lane <bcl@redhat.com> - 21.47-1
changelog:
  - Fix references to requiredPackages (bcl)
  - Drop anaconda. prefix from copied logs (bcl)
  - dnf should put its logs in /tmp/ (bcl)
  - Make sure the software listboxes are shown (bcl)
  - dnf should report that it supports Closest Mirror (bcl)
  - Do not prefer /tmp for dnf downloads (bcl)
  - Reset dnf package sack (bcl)
  - Fix dnf base repo setup to fall back to default gracefully (bcl)
  - Move addDriverRepo into PackagePayload class (bcl)
  - Rename some dnf items to match yum (bcl)
  - rpmostreepayload: Drop selinux-ensure-labeled call (walters)
  - Run anaconda in fullscreen whenever possible. (dshea)
  - Correct the constant used with gtk_widget_set_state_flags (dshea)
  - Restore some CSS rules from the pre-3.13 Adwaita theme. (dshea)
  - Adapt to changes in blivet.udev interface. (amulhern)
  - Bump blivet version to pick up blivet.udev interface changes. (amulhern)
  - Use the enlightbox context manager for the add network device dialog
    (mkolman)
  - DNFPayload: do not add group 'core' twice. (ales)
  - Remove the window property from UIObject. (dshea)
  - Unravel the Hub and Spoke classes. (dshea)
  - Fix --kickstart option (bcl)
  - Bump up the required pykickstart version (vpodzime)
  - Use GtkRevealer for widget hiding in storage spoke (mkolman)
  - rpmostreepayload: create /var/spool/mail required when adding user (rvykydal)
  - rpmostreepayload: Don't recreateInitrds for this payload (walters)
  - Don't use geolocation when installing with kickstart (mkolman)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.1-1
changelog:
  * Wed Jul 16 2014 Brian C. Lane <bcl@redhat.com> - 21.48-1
  - Fix the custom accelerators in custom partitioning (#1118999) (dshea)
  - Revert "Reset dnf package sack" (bcl)
  - Ignore the home directory setting if no change was requested (#1119900)
    (dshea)
  - Set an upper limit on uids and gids. (dshea)
  - Remove the "Create a home directory" checkbox (dshea)
  - Fix a typo: inital -> initial (mkolman)
  - Don't create the configured.ini file (#1119166) (mkolman)
  - zRAM swap for Anaconda (vpodzime)
  - Split kickstart arg handling (bcl)
  - Update icon names used within python code. (dshea)
  - Add a check for whether icons used in glade files are valid (dshea)
  - Load icons by name instead of stock-id. (dshea)
  - Remove extra list() call with no effect (vpodzime)
  - Add NetworkManager-wifi dependency for the GUI subpackage (#1111417)
    (mkolman)
  - Python's octals changed; mount's didn't. (pjones)
  - Add a basic test for ostree-based installs. (clumens)
  - Print out exceptions at log level critical. (clumens)
  - Rename environment variables in run_gui_tests.sh. (clumens)
  - Rename gui/runtest.sh to fit in with the other test names. (clumens)
  - Write the grub config even on errors (#1114774) (bcl)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.2-1
changelog:
  - Mark zRAM devices as protected and ignore them (vpodzime)
  - Make storage sanity check aware of base RAM requirements (#1123466)
    (vpodzime)
  - Move sanityCheck code to anaconda's codebase (vpodzime)
  - Do not multiply/divide RAM sizes by 1024 back and forth (vpodzime)
  - Raise exception if reading lines from a killed process (vpodzime)
  - Use zRAM swap up to 2 GB of RAM (vpodzime)
  - RAM requirements depend on squashfs.img's origin (vpodzime)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.3-1
changelog:
  - Prevent crashes due to accessing X server from multiple threads (#1134507)
    (vpodzime)
  - Remove anaconda_make_pixbuf (dshea)
  - Require anaconda-widgets from anaconda-widgets-devel (dshea)
  - Run /sbin/ldconfig when installing or uninstalling anaconda-widgets (dshea)
  - Remove the shebang from anaconda.py (dshea)
  - Exclude the compiled text and rescue files from anaconda-core (dshea)
  - Update our copy of the GPL (dshea)
  - Rearrange the entry, example and tip on Advanced User dialog (vpodzime)
  - Write storage after liveimg install (#1080396) (bcl)
  - Add some sanity checking to live payload (vpodzime)
  - Use blivet's getFreeSpace for limitting automatic swap size (vpodzime)
  - Ask users for enough space right at the first time (#876916) (vpodzime)
  - Don't require user creation when root is locked (#1030626) (bcl)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.4-1
changelog:
  - Use first part of Product for UEFI entry (#1128474) (bcl)
  - Use first part of Product as repo name (#1128474) (bcl)
  - makeupdates: Report git diff errors (bcl)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.5-1
changelog:
  - Revert productName repo name change (#1128474) (bcl)
  - Do not try to disable no firstboot services (#1139621) (vpodzime)
  - Let finding install classes be more flexible for Fedora (#1138820). (clumens)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.8-1
changelog:
  - Show help also when alt+F1 is pressed (mkolman)
  - Support display of the custom mnemonics on the help button (mkolman)
  - Activate the built-in help when F1 is pressed (mkolman)
  - Specify help file names for hubs and spokes (mkolman)
  - Add a help button to every Anaconda screen (mkolman)
  - Don't attempt terminal size detection on the s390 (#1145065) (mkolman)
  - Fix Welcome spoke not showing up during kickstart installation (#1147943)
    (mkolman)
  - Clear the list of watched PIDs before exiting. (#1146708) (dshea)
  - Avoid the possibility of size variables being unset (#1146585) (dshea)
  - Adapt to corrected interpetation of logvol --percent. (#1146156) (dlehman)
  - Handle cancellation of new container creation. (dlehman)
  - Reflect previous custom/autopart selection in the storage spoke. (#1144520)
    (dlehman)
  - Clear out custom storage ksdata after first attempt to apply it. (#1144560)
    (dlehman)
  - Pass size as Size when adjusting container after device removal. (#1141707)
    (dlehman)
  - Handle 0's returned by Gdk (dshea)
  - When running on HiDPI monitors, scale anaconda by a factor of 2 (dshea)
  - Highlight languages in langsupport that contain selected locales (dshea)
  - Add a wrapper function for GtkTreeViewColumn.set_cell_data_func (dshea)
  - Clear the kickstart password if cleared by the user (#1133185) (dshea)
  - Remove inactive languages from LINGUAS. (dshea)
  - Use suggested-action on more buttons (#1131254) (dshea)
  - Filter empty comps groups from both specific and generic lists (dshea)
  - Use one thread for payload setup. (dshea)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.9-1
changelog:
  - Bump blivet version requires for all the DASD changes in 0.61.4.
    (sbueno+anaconda)
  - We now need to specify an epoch for the python-blivet version requires.
    (clumens)
  - Fix autotools rules to properly include help placeholders (#1072033)
    (mkolman)
  - Modify nm to return defaults when no dbus is available (bcl)
  - Skip networkInitialize for image and dir installations (bcl)
  - Ignore safe_dbus errors in keyboard setup (bcl)
  - Skip syslog for dirinstall (bcl)
  - s390x: show dialog if kernel cmdline in zipl.conf is too long.
    (sbueno+anaconda)
  - Really exit when "Exit installer" in the error dialog is clicked (vpodzime)
  - Don't allow /boot on lvm on s390x. (sbueno+anaconda)
  - Add the new langsupport.py TUI spoke to POTFILES.in. (clumens)
  - Remove the now-unused imports of storageInitialize. (clumens)
  - Add support for language selection in text mode. (sbueno+anaconda)
  - Don't force a user to return to the storage spoke after dasdfmt
    (sbueno+anaconda)
  - Don't run storageInitialize after dasdfmt (sbueno+anaconda)
  - s390x: Apply disk selection before dasdfmt to preserve data.
    (sbueno+anaconda)
  - Don't show the Add DASD button unless on s390x. (sbueno+anaconda)
  - Don't show the Add DASD button unless on s390x. (sbueno+anaconda)
  - Preserve network args on s390x. (sbueno+anaconda)
  - Deprecate RUNKS cmdline option. (sbueno+anaconda)
  - Re-order the tz's in text mode to mirror the graphical order.
    (sbueno+anaconda)
  - Fix an issue with bad NFS info specified in source spoke. (sbueno+anaconda)
  - Warn if software selection size exceeds available space. (sbueno+anaconda)
  - Fix q for quit issue in text mode (#997405) (sbueno+anaconda)
  - Change the accelerator key for Add DASD label. (sbueno+anaconda)
  - Add dialog box for adding DASDs. (sbueno+anaconda)
  - Add a button for adding an ECKD DASD. (sbueno+anaconda)
  - Change a confusing string in TUI NFS configuration screen. (#1057690)
    (sbueno+anaconda)
  - NM-wifi is missing on s390(x) (dan)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.10-1
changelog:
  - Change our docs that are close to ReST to proper ReST (vpodzime)
  - Run restorecon on /etc/hostname (#1133368) (bcl)
  - Add authconfig and firewalld packages when used in ks (#1147687) (bcl)
  - Allow kickstart with no method (#972265) (bcl)
  - Fix a typo from 73d3a8e5. (sbueno+anaconda)
  - Respect both ways how to disable bootloader installation (vpodzime)
  - Don't care about crash args in bootloader (#1116323) (vpodzime)
  - Add nombr to anaconda to suppress updating MBR (#886502) (gczarcinski)
  - Use translated versions of the AM/PM strings consistently (vpodzime)
  - Import GUI-specific stuff only when running GUI in entropy handling
    (vpodzime)
  - Always store the information about display mode in ksdata (vpodzime)
  - Make the date format locale-dependent in our GUI (#1044233) (vpodzime)
  - A function for resolving date format and order (vpodzime)
  - Reorganize the right side of the Custom spoke (#1094856) (vpodzime)
  - Move _verifyLUKSDevicesHaveKey to Anaconda's codebase (vpodzime)
  - Add support for thin pool profile specification in kickstart (vpodzime)
  - Fix file name of the entropy dialog in POTFILES.in (vpodzime)
  - Require minimum random data entropy when creating LUKS (#1073679) (vpodzime)
  - Give blivet callbacks for reporting partitioning progress (vpodzime)
  - Split localed's converted layouts and variants (#1073825) (vpodzime)
  - Create free space snapshot before doing custom->autopart (vpodzime)
  - Specify thin pool metadata/chunk size only if given by user (#1140635)
    (vpodzime)
  - Distribute the right docs files (vpodzime)
  - Don't automatically select environments for kickstart installs (#1018226)
    (dshea)
  - Initialize the GUI lock in a way that doesn't break the API (dshea)
  - Don't check enabledPlugins if plugins are not yet enabled (#1142544) (dshea)
  - Really fix an enlightbox call. (dshea)
  - Don't strip accents from the user-inputted keyboard string (dshea)
  - Convert strings to unicode in have_word_match (#1146581) (dshea)
  - Switch to using the new help content path (#1072033) (mkolman)
  - Fix a race between checking for Gtk.main_level and running Gtk.main (dshea)
  - Allow recursive lightbox calls (#1147337) (dshea)
  - Disable the ntp service with --nontp (#1135768) (dshea)
  - Ignore partition start if there is a biosboot partition (#1044849) (bcl)
  - Require a larger /boot (#1129629). (clumens)
  - Remove duplicates when adding new devices (#887526) (bcl)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.11-1
changelog:
  - Don't panic prematurely on a missing size (#1154190) (amulhern)
  - Log when using updates from /tmp/updates/ (bcl)
  - Fix # handling in SimpleConfigFile (#1045687) (bcl)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.12-1
changelog:
  - Fix a spelling error (#1153672) (dshea)
  - Update checkSizes to work in terms of Size objects (#1129629). (clumens)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.13-1
changelog:
  - Fix handling of md fwraid names in kickstart bootloader command. (#1156354)
    (dlehman)
  - Fix switching environments when no environment is selected (#1155756) (dshea)
  - Use an empty string for no root password instead of None (#1155576) (dshea)
  - Just preserve the %addon header args if an addon is missing (#1155026)
    (vpodzime)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.14-1
changelog:
  - Add support for doing a liveimg kickstart with local file (#1140358) (bcl)
  - Add a placeholder for a product-specific logo (dshea)
  - Load a stylesheet from product.img (dshea)
  - Fix make distcheck (mkolman)
  - Include help content in the Anaconda tarball (mkolman)
  - Fix typo causing traceback when NTP is turned ON/OFF (vpodzime)
  - Unpack the callback data given to us by blivet (vpodzime)
  - Add timeout to callbacks waiting for enough entropy (#1073679) (vpodzime)
  - Prevent tb on s390x when de-selecting a DASD and doing custom part.
    (sbueno+anaconda)
  - Revert "Revert productName repo name change (#1128474)" (bcl)
  - Update the background image paths used in Fedora. (dshea)
  - dracut/save-initramfs.sh: don't save /tmp (wwoods)
  - Add a pylint module to detect uses of interruptible system calls. (dshea)
  - Wrap interruptible system calls in a loop (#1160041) (dshea)
  - Warn users about liveinst usage of --updates (#1153550) (bcl)
  - Catch EOFError in raw_input (#1158841) (bcl)
  - Ensure we are specifying sensible target sizes for resize. (#1120964)
    (dlehman)
  - Set the autopart fstype for boot too (#1112697) (bcl)
  - Unconditionally clear the process handle when nm-c-e exits (#1132645) (dshea)
  - Make anaconda more scrollable (#1135024) (dshea)
  - Lightly rearrange the nav_area (dshea)
  - Do not install interactive exception handler in cmdline mode (#1155979)
    (vpodzime)
  - Wait until all spokes are setup before updating continue button (bcl)
  - Allow adding prepboot to a blank disk in custom (#1155660) (bcl)
  - Remove unused imports (vpodzime)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.15-1
changelog:
  - do not delete liveimg --url=file:/// file (gczarcinski)
  - Provide useful hints on TTY1 during the installation (mkolman)
  - Fix typo from commit 9b3259874. (#1120964) (dlehman)
  - Remove the old custom partitioning help dialog (mkolman)
  - Check if we read something when emptying stdin queue (vpodzime)
  - Require min entropy for 'part --encrypted' devices (#1162695) (vpodzime)
  - Don't rely on terminal attributes being configurable (#1162702) (vpodzime)
  - Disable payloads that failed to setup (#1162732) (dshea)
  - Don't change langpacks config of installer environment (#1066017) (rvykydal)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.17-1
changelog:
  - Make sure storage info bar is displayed (#1166730) (bcl)
  - Fix SELINUX_DEFAULT import (#1167047) (bcl)
  - Fix noselinux cmdline default (#1167047) (bcl)


author: Vratislav Podzimek <vpodzime@redhat.com> - 21.48.18-1
changelog:
  - Tell curl it should follow redirects when fetching updates.img (#1168561)
    (vpodzime)
  - Snapshot free space after clearpart for swap suggestion (#1167965) (vpodzime)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.20-1
changelog:
  - Revert "Search for a valid stage1 device on disks with stage1 mount points
    (#1168118)" (sbueno+anaconda)
  - Make Python's default encoding detection work on Live installations
    (#1169019) (vpodzime)
  - Force translation files download instead of skipping them (#1169023)
    (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 21.48.21-1
changelog:
  - Revert "Make Python's default encoding detection work on Live installations
    (#1169019)" (awilliam)


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.22-1
changelog:
  - Really fix issue with starting in cmdline mode on s390x. (#1040933)
    (sbueno+anaconda)
  - Fix EOF error that occurs if user input required in x3270. (#1171135)
    (jstodola)


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.1-1
changelog:
  - Update scripts/makebumpver to current version from master (bcl)
    Related: rhbz#1196721
  - Add .0 to version number -- 21.48.22.0 (bcl)
    Related: rhbz#1196721
  - Show empty VGs in the custom spoke. (dlehman)
    Related: rhbz#1196721
  - Fix makeupdates handling of Release: (bcl)
    Related: rhbz#1196721
  - network: add teamd package if team is used during installation (#1185670) (rvykydal)
    Related: rhbz#1196721
  - network: pass team opts to dracut for netroot (#1075666) (rvykydal)
    Related: rhbz#1196721
  - iscsi: when logging into nodes consider ip:port of node (#1114820) (rvykydal)
    Related: rhbz#1196721
  - Don't traceback if connection does not have read-only setting (#1158919) (rvykydal)
    Related: rhbz#1196721
  - network: display only actual fqdn of ip we offer for vnc connection (#1089429) (rvykydal)
    Related: rhbz#1196721
  - network: fix a typo making creating virtual devices in %pre fail (#1075195) (rvykydal)
    Related: rhbz#1196721
  - network: support for bridge, require pykickstart with the support (#1075195) (rvykydal)
    Related: rhbz#1196721
  - network: Catch exception from NM failing to create a bridge device (#1075195) (rvykydal)
    Related: rhbz#1196721
  - network: add bridge support for kickstart %pre phase (#1075195) (rvykydal)
    Related: rhbz#1196721
  - network: generate kickstart commands for bridge devices (#1075195) (rvykydal)
    Related: rhbz#1196721
  - network: add bridge support to kickstart (#1075195) (rvykydal)
    Related: rhbz#1196721
  - network: support for adding bridge devices (#1075195) (rvykydal)
    Related: rhbz#1196721
  - network: display bridge devices in status (#1075195) (rvykydal)
    Related: rhbz#1196721
  - parent is unused, so mark it as such. (clumens)
    Related: rhbz#1196721
  - network: enable NM ibft plugin only for ip=ibft boot option (#804511) (rvykydal)
    Related: rhbz#1196721
  - network: add support for vlan tag in iBFT (#804511) (rvykydal)
    Related: rhbz#1196721
  - network: GUI: reactivate connection automatically after configuration (#1033063) (rvykydal)
    Related: rhbz#1196721
  - Fix position of Refresh List button in filter spoke (#1065716) (rvykydal)
    Related: rhbz#1196721
  - Fix accelerator collision of Refresh button (#1065716) (rvykydal)
    Related: rhbz#1196721
  - gui: add Refresh button to network storage UI (#1065716) (rvykydal)
    Related: rhbz#1196721
  - Use absolute path for extlinux/menu.c32 (rvykydal)
    Related: rhbz#1196721
  - iscsi: pass rd.* options of devices to be mouted in dracut (#1192398) (rvykydal)
    Related: rhbz#1196721
  - network: adapt to NetworkManager package split-up (#1182633) (rvykydal)
    Related: rhbz#1196721
  - Take "RHEL Atomic Host" as rhel installclass (#1150410) (rvykydal)
    Related: rhbz#1196721
  - network: handle dbus UnknownMethod exception on invalid objects (#1061796) (rvykydal)
    Related: rhbz#1196721
  - network: fix typo 'Private ksy pasword' (#1120374) (rvykydal)
    Related: rhbz#1196721
  - Fix up a string style issue found in the last network commits. (clumens)
    Related: rhbz#1196721
  - network: WPA Enterprise: don't ask twice for password (#1120374) (rvykydal)
    Related: rhbz#1196721
  - network: add support for WPA Enterprise (#1120374) (rvykydal)
    Related: rhbz#1196721
  - network: add s390 network ifcfg options also for bond slaves (#1090558) (rvykydal)
    Related: rhbz#1196721
  - network: don't crash, just log for unrecognized bond options (#1039006) (rvykydal)
    Related: rhbz#1196721
  - network: don't traceback on invalid team options (#1114282) (rvykydal)
    Related: rhbz#1196721
  - network: copy resolv.conf to chroot before installing packages (#1048520) (rvykydal)
    Related: rhbz#1196721
  - network: don't write HWADDR in ifcfgs generated by kickstart (#1130042) (rvykydal)
    Related: rhbz#1196721
  - network: show ip of device with default route for vnc and ssh (#1083305) (rvykydal)
    Related: rhbz#1196721
  - network: adapt to NM fixing virtual device disconnection (#1084953) (rvykydal)
    Related: rhbz#1196721
  - Log installation successes and failures via ipmitool. (clumens)
    Related: rhbz#1196721
  - In dracut, do not display a warning for network lines with just a hostname.  (clumens)
    Related: rhbz#1196721
  - Preserve the order of boot args added by kickstart. (clumens)
    Related: rhbz#1196721
  - Make the Selected Disks and Configure Mount Point dialogs wider. (clumens)
    Related: rhbz#1196721
  - Sync up the Selected Disks and Configure Mount Points dialogs. (clumens)
    Related: rhbz#1196721
  - Add rc-release target (bcl)
    Related: rhbz#1196721
  - Change --skip-tx to --skip-zanata in scratch-bumpver (bcl)
    Related: rhbz#1196721
  - Add --newrelease to makebumpver (bcl)
    Related: rhbz#1196721
  - Update translation documentation for Zanata (bcl)
    Related: rhbz#1196721
  - Switch translation support to fedora.zanata.org (bcl)
    Related: rhbz#1196721
  - Revert "Use gettext to process glade files." (clumens)
    Related: rhbz#1196721
  - Change of label in iscsi storage spoke (jkonecny)
    Related: rhbz#1196721
  - Clear TUI source spoke errors that may have been leftover from a prior attempt. (#1196721) (sbueno+anaconda)
    Related: rhbz#1196721
  - Fix completion setting in TUI language spoke. (#1196721) (sbueno+anaconda)
    Related: rhbz#1196721


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.2-1
changelog:
  - Remove an extlinux-related block from rpmostreepayload.py. (clumens)
    Related: rhbz#1196721
    Related: rhbz#1153409
  - bootloader: Bridge efi_dir configuration earlier for rpmostreepayload
    (walters)
    Related: rhbz#1196721
    Related: rhbz#1153409
  - rpmostreepayload: Handle grub2+EFI layout (walters)
    Related: rhbz#1196721
    Related: rhbz#1153409
  - rpmostreepayload: Copy all subdirectories of /usr/lib/ostree-boot (walters)
    Related: rhbz#1196721
    Related: rhbz#1153409
  - Handle the case of rpmostreepayload + GRUB2 (walters)
    Related: rhbz#1196721
    Related: rhbz#1153409
  - Implement the new reqpart command. (clumens)
    Resolves: rhbz#1164660


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.3-1
changelog:
  - Revert "Select http source if there is no mirror enabled." (bcl)
    Related: rhbz#1196721
  - Make sure /boot is not LVM LV if we're on s390x (sbueno+anaconda)
    Resolves: rhbz#873135
    Related: rhbz#1196721
  - Preserve kickstart url behavior for mirrorlist (bcl)
    Related: rhbz#1196721
    Related: rhbz#1109933
  - Use a backslash to escape nfs spaces instead of x20 (bcl)
    Related: rhbz#1196721
    Related: rhbz#1109933
  - Create missing parent directories for user's home directory (bcl)
    Resolves: rhbz#1163775
    Related: rhbz#1196721
  - custom: Clearing errors should also clear Done clicked state (bcl)
    Related: rhbz#1196721
    Resolves: rhbz#1158609
  - Clear errors when downloading new MD in text (bcl)
    Related: rhbz#1196721
    Related: rhbz#1125927
  - Return result of default key handling in text summary hub (bcl)
    Related: rhbz#1196721
    Related: rhbz#997405
  - Protect protected devices in custom spoke (bcl)
    Related: rhbz#1196721
    Resolves: rhbz#1052883
  - Don't call storage.write for dirinstall (bcl)
    Related: rhbz#1196721
    Related: rhbz#1120206
  - Don't call BusyCursor before Gdk is setup (bcl)
    Resolves: rhbz#1078868
    Related: rhbz#1196721
  - Handle spaces in inst.repo, kickstart nfs, and url commands (bcl)
    Resolves: rhbz#1109933
    Related: rhbz#1196721
  - Exclude hfsplus-tools from rhel (bcl)
    Related: rhbz#1196721
    Resolves: rhbz#1119305
  - Skip nvram update on ppc64 image/dir installations (bcl)
    Resolves: rhbz#1136486
    Related: rhbz#1196721
  - CmdlineError should exit with a 1 (bcl)
    Related: rhbz#1196721
    Related: rhbz#1102318
  - Remove logging to tty3 and tty5 (bcl)
    Resolves: rhbz#1073336
    Related: rhbz#1196721
  - Only install liveinst symlink on supported arches (bcl)
    Related: rhbz#1121678
    Related: rhbz#1196721
  - Mountpoint encrypted checkbox reflects container state (bcl)
    Resolves: rhbz#1076171
    Related: rhbz#1196721
  - Write sslverify=0 for url kickstart method (bcl)
    Related: rhbz#1196721
    Resolves: rhbz#1116858
  - Add noverifyssl and proxy support to dracut ks handling (bcl)
    Related: rhbz#1196721
    Resolves: rhbz#1116858
  - Install selected ks repos to target (bcl)
    Related: rhbz#1196721
    Resolves: rhbz#1119867
  - Add check for the format of grub2 encrypted password (bcl)
    Related: rhbz#1196721
    Related: rhbz#1070327
  - Use low level file i/o for rpm callback logging (bcl)
    Related: rhbz#1196721
    Resolves: rhbz#1035745
  - Add platform specific group selection (bcl)
    Resolves: rhbz#884385
    Related: rhbz#1196721
  - reiserfs is not supported (bcl)
    Related: rhbz#1196721
    Resolves: rhbz#1066635
  - remove epdb SIGHUP debug handler (bcl)
    Related: rhbz#1196721
    Related: rhbz#1065557
  - Clean up some rpmdiff errors (bcl)
    Related: rhbz#1196721
    Resolves: rhbz#1012624
  - Remove Closest mirrors if no mirrors (bcl)
    Related: rhbz#876135
    Related: rhbz#1196721
  - Select http source if there is no mirror enabled. (bcl)
    Related: rhbz#876135
    Related: rhbz#1196721
  - Use RHEL7 kickstart commands (bcl)
    Related: rhbz#1196721
  - Show error on invalid username attempts in TUI. (sbueno+anaconda)
    Resolves: rhbz#1171778
  - Fix enlightbox call in ZFCPDialog. (sbueno+anaconda)
    Related: rhbz#1196721
  - Get rid of unnecessary python disable-msg in zfcp spoke. (sbueno+anaconda)
    Related: rhbz#1196721
  - Fix some pylint errors in the zfcp panel. (sbueno+anaconda)
    Related: rhbz#1196721
  - Fix an accelerator collision found on the filter page. (sbueno+anaconda)
    Related: rhbz#1196721
  - Fix some issues pylint found. (sbueno+anaconda)
    Related: rhbz#1196721
  - Show disk paths on Other page in advstorage. (sbueno+anaconda)
    Related: rhbz#1196721
  - Add missing translation context for Add ECKD DASD button in advstorage.
    (sbueno+anaconda)
    Related: rhbz#1196721
  - Add translation contexts for z and zfcp panel in advstorage.
    (sbueno+anaconda)
    Related: rhbz#1196721
  - Convert devices size to str for GUI for zFCP devices (amulhern)
    Related: rhbz#1196721
  - Fix string formatting of zFCP devices. (sbueno+anaconda)
    Related: rhbz#1196721
  - Fix the way zFCP devices are displayed in storage spoke. (sbueno+anaconda)
    Related: rhbz#1196721
  - Show labels on Add zFCP dialog. (sbueno+anaconda)
    Related: rhbz#1196721
  - Fix failure to search by LUN in advanced storage spoke. (sbueno+anaconda)
    Related: rhbz#1196721
  - Get rid of the clear button in advanced storage spoke. (sbueno+anaconda)
    Related: rhbz#1196721
  - Fix up the z Panel in advanced storage. (sbueno+anaconda)
    Related: rhbz#1196721
  - Add support for adding zFCP devices in the GUI (sbueno+anaconda)
    Related: rhbz#1196721
  - Fix dracut reads ksdevice from missing os enviromnent (jkonecny)
    Related: rhbz#1085310
  - Fix --device=link and --device not specified (rvykydal)
    Resolves: rhbz#1085310


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.4-1
changelog:
  - network: on rhel don't assume autoconnections created by NM (rvykydal)
    Related: rhbz#1196721
  - Start vncconfig for cut/paste (hamzy)
    Resolves: rhbz#1169991
  - Don't unconditionally set ksdata.lang.seen to True (mkolman)
    Related: rhbz#1198642
  - Make sure LANG is always set to something (dshea)
    Resolves: rhbz#1198642
  - Add links to clickable warning and error messages. (dshea)
    Resolves: rhbz#1125145
  - Add a test to look for clickable messages that aren't clickable enough.
    (dshea)
    Related: rhbz#1125145
  - Allow markup and links in the info bar. (dshea)
    Related: rhbz#1125145
  - Update the FCOE command to use the RHEL7 base class. (clumens)
    Related: rhbz#1196721
  - Fix RHEL Atomic installclass test (bcl)
    Related: rhbz#1196721
  - Use a rhel7.2 mock chroot for rc-release (bcl)
    Related: rhbz#1196721
  - Build documentation during build instead of dist (dshea)
    Related: rhbz#1196721
  - Clean out the mock chroot before attempting to run the rest of the test.
    (clumens)
    Related: rhbz#1196721
  - Put all mock results into the top-level source dir. (clumens)
    Related: rhbz#1196721
  - Change dracut requires to the RHEL7 version. (bcl)
    Related: rhbz#1196721
  - dnf is not supported in RHEL7 (bcl)
    Related: rhbz#1196721
  - Use createrepo, createrepo_c isn't available in RHEL7 (bcl)
    Related: rhbz#1196721
  - Change F21 pykickstart commands to RHEL7 (jkonecny)
    Related: rhbz#1196721
  - Add an option to startProgram to not reset the locale (dshea)
    Related: rhbz#1188287
  - Set $LIBUSER_CONF early (dshea)
    Related: rhbz#1188287
  - Assume UTC if setting the system time without a timezone (dshea)
    Related: rhbz#1188287
  - Do not set $TZ (dshea)
    Related: rhbz#1188287
  - Beware of 0 being the same bool value as None when setting time (vpodzime)
    Related: rhbz#1188287
  - Fix the last member of the struct_time struct (vpodzime)
    Related: rhbz#1188287
  - Remove timestamp-based version support. (dshea)
    Related: rhbz#1188287
  - Avoid setting $LANG and $LANGUAGE, except where we can't (dshea)
    Resolves: rhbz#1188287
  - Add a parameter to iutil.startProgram to extend the environment (dshea)
    Related: rhbz#1188287
  - Add a method to set environment variables for child processes (dshea)
    Related: rhbz#1188287
  - Set $DISPLAY before threads are started. (dshea)
    Related: rhbz#1188287
  - Handle the simple cases of environment modification. (dshea)
    Related: rhbz#1188287
  - Always use iutil to start processes. (dshea)
    Related: rhbz#1188287
  - Move the X startup logic to iutil (dshea)
    Related: rhbz#1188287
  - Move process watching to iutil. (dshea)
    Related: rhbz#1188287
  - Close file descriptors while daemonizing auditd (dshea)
    Related: rhbz#1188287
  - Add an option to only capture stdout with execWithCapture (dshea)
    Related: rhbz#1188287
  - Simplify iutil.execReadlines. (dshea)
    Related: rhbz#1188287
  - Add close_fds to the Popen call. (dshea)
    Related: rhbz#1188287
  - Add an option to startProgram to reset signal handlers. (dshea)
    Related: rhbz#1188287
  - Add a method startProgram to handle process starting (dshea)
    Related: rhbz#1188287
  - Lock program_log_lock closer to where the log is written. (dshea)
    Related: rhbz#1188287
  - Add missing files to po/POTFILES.in, after fixing the test for them.
    (clumens)
    Related: rhbz#1196721
  - Backport iutil_test.py updates from master (atodorov). (clumens)
    Related: rhbz#1196721
  - Backport pylint updates from master (atodorov). (clumens)
    Related: rhbz#1196721
  - Fix strings with style problems. (clumens)
    Related: rhbz#1196721
  - Backport gettext updates from master (atodorov). (clumens)
    Related: rhbz#1196721
  - Remove the automated GUI tests. (clumens)
    Related: rhbz#1196721
  - Fix Kickstart installation without default gateway errors out (jkonecny)
    Resolves: rhbz#1147181
  - rescue: find root partition of ostree (atomic) installations (rvykydal)
    Resolves: rhbz#1152041
  - Identify Atomic install class by correct product name (rvykydal)
    Resolves: rhbz#1193268
  - rpmostreepayload: Avoid shutil.copytree in favor of cp -r to fix symlinks
    (walters)
    Resolves: rhbz#1199127
  - atomic: set up atomic specific partitioning defaults (rvykydal)
    Resolves: rhbz#1155452
  - A couple updates to installclasses. (clumens)
    Related: rhbz#1155452
  - rpmostreepayload: Rework remote add handling (walters)
    Resolves: rhbz#1199127
  - Use RHEL7 Bootloader command in parse-kickstart (rvykydal)
    Related: rhbz#1196721
  - Use RHEL7 Network command in parse-kickstart (rvykydal)
    Related: rhbz#1196721


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.5-1
changelog:
  - Actually distribute the clickable message test (dshea)
    Related: rhbz#1125145
  - Get rid of the find button in the filter spoke. (dshea)
    Related: rhbz#1168950
  - Rearrange filter.glade (dshea)
    Related: rhbz#1168950
  - Fix errors in the vendor column renderers. (dshea)
    Related: rhbz#1168950
  - Fix some minor inconsistencies in filter.glade (dshea)
    Related: rhbz#1168950
  - Fix issues with advanced storage searching. (dshea)
    Resolves: rhbz#1168950
  - Remove duplicate entries from search combo boxes (dshea)
    Resolves: rhbz#1168950
  - Use named IDs for the filter type combo boxes. (dshea)
    Related: rhbz#1168950
  - Rearrange filter.glade the way glade wants it now (dshea)
    Related: rhbz#1168950
  - Pass the pylint test. (clumens)
    Related: rhbz#1196721


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.6-1
changelog:
  - Modify Proxy Label in Installation Source Spoke (rmarshall)
    Resolves: rhbz#1168554
  - Add error checks to liveimg mount code (bcl)
    Related: rhbz#1178703
  - If the network is disabled, also disable the network part of the source
    spoke. (clumens)
    Related: rhbz#1196721
  - Grubby no longer needs to be explicitly included (dmarlin)
    Resolves: rhbz#1176705
  - Don't allow /boot on iSCSI. (sbueno+anaconda)
    Resolves: rhbz#1164195
  - Fix building docs when running under "make distcheck". (clumens)
    Related: rhbz#1196721
  - Fix problems discovered by the glade tests. (clumens)
    Related: rhbz#1196721
  - Include .glade.h files in the distribution. (clumens)
    Related: rhbz#1196721


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.7-1
changelog:
  - Update upd-kernel so that it actually works (bcl)
    Resolves: rhbz#1166535
  - Fix passing ,nfsvers=3 to dracut (bcl)
    Resolves: rhbz#1161820
  - Extract xattrs from tar payload (bcl)
    Resolves: rhbz#1196021
  - rpmostreepayload: write storage config after shared var is mounted (rvykydal)
    Resolves: rhbz#1203608
  - Do not log Xorg output to tty5 (dshea)
    Related: rhbz#1188287
  - Fix for "Kickstart installation fails..." (jkonecny)
    Resolves: rhbz#1197960


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.8-1
changelog:
  - Fix nfs4 stage2 and repo handling (bcl)
    Resolves: rhbz#1230329
  - Add support for reboot --kexec kickstart command (bcl)
    Related: rhbz#1207747
  - Add inst.kexec and --kexec support to reboot with kexec (bcl)
    Resolves: rhbz#1207747
  - Add setup_kexec method to prepare the system for a reboot with kexec (bcl)
    Related: rhbz#1207747
  - Include NetworkManager-glib in anaconda-core (bcl)
    Related: rhbz#1196721
  - Use simple_replace to edit langpacks.conf (bcl)
    Resolves: rhbz#1165980
  - Add simple_replace config file function (bcl)
    Related: rhbz#1165980
  - Keyboard Scroll Fails in Viewports (dshea)
    Resolves: rhbz#1189899
  - Fix Issue with Spaces in Network IPs and Bad Input(jkonecny)
    Resolves: rhbz#1174451
  - network: fix a typo in condition for installing teamd (rvykydal)
    Resolves: rhbz#1199185
  - Fix IP / hostname mismatches when showing VNC server address (rvykydal)
    Resolves: rhbz#1186726
  - Check also ipv6 default routes when looking for onboot=yes device (rvykydal)
    Resolves: rhbz#1185280


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.9-1
changelog:
  - Enable Anaconda to configure NTP (jkonecny)
    Resolves: rhbz#1085013
  - Retry package repository metadata downloads (mkolman)
    Resolves: rhbz#1177366
  - Use UEFI VFAT ESP when kickstarting Intel Macs (jan.kundrat)
    Resolves: rhbz#1219196
  - If using pre-existing, no size needs to be specified in ksdata (amulhern)
    Resolves: rhbz#1169783
    Related: rhbz#1196721
  - Use the RHEL7 versions of certain partitioning commands. (clumens)
    Related: rhbz#1217110
  - Fix set size to partition in custom spoke (jkonecny)
    Related: rhbz#1196721
  - Expect addons to have categories for both GUI and TUI (vpodzime)
    Related: rhbz#1128616


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.10-1
changelog:
  - Eliminate some false test results when running glade tests. (atodorov)
    Related: rhbz#1196721
  - Fix adding 'boot=' option in FIPS mode (vtrefny)
    Resolves: rhbz#1190146
  - Use the index in grubenv (bcl)
    Resolves: rhbz#1209678
  - Make colon optional while adding iSCSI Initiator Name (sujithpshankar)
    Resolves: rhbz#1177573
  - Add basic support for LVM cache creation in kickstart (vpodzime)
    Resolves: rhbz#1120421
  - Change the betanag wording (back) to be better for RHEL (vpodzime)
    Related: rhbz#1196721
  - Set sensitivity of the "Encrypt" checkbox together with its label (vpodzime)
    Resolves: rhbz#1181468
  - Use Size, not int, for size (amulhern)
    Related: rhbz#1076055
    Related: rhbz#1196721
  - Changes for scheduling size change on an existing device (amulhern)
    Related: rhbz#1076055
    Related: rhbz#1196721
  - Remove too strict condition for changing size (amulhern)
    Related: rhbz#1076055
    Related: rhbz#1196721


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.11-1
changelog:
  - network: catch another race when calling dbus methods on invalid devices
    (rvykydal)
    Related: rhbz#1179276
  - network: GUI, add connection even when virtual device activation failed
    (rvykydal)
    Resolves: rhbz#1179276
  - Remove an extra '>' in the betanag warning (vpodzime)
    Related: rhbz#1196721
  - Do not mix two lists of fields when applying changes in text mode (vpodzime)
    Resolves: rhbz#1231149


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.12-1
changelog:
  - dd: drop unnecessary archive_read_data_skip (Will Woods)
    Related: rhbz#1222056
  - dd_extract: -l should not extract modules+firmware (Will Woods)
    Related: rhbz#1222056
  - dd: fix permissions on extracted files (wwoods)
    Resolves: rhbz#1222056
  - Create and use snapshot of on-disk storage with no modifications (vpodzime)
    Resolves: rhbz#1160862
    Resolves: rhbz#1187644
  - Implement the class for storage snapshots (vpodzime)
    Related: rhbz#1187644
    Related: rhbz#1160862
  - Prevent any changes in the StorageSpoke if just going back (vpodzime)
    Related: rhbz#1187644
    Related: rhbz#1160862
  - fix inst.ks.sendmac for static ip=XXX (wwoods)
    Resolves: rhbz#1190115


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.13-1
changelog:
  - Cancel Container Edit Sensitizes Update (rmarshall)
    Resolves: rhbz#1168656
  - Add support for specifying arbitrary mkfs options. (clumens)
    Resolves: rhbz#1217110
  - Do not display curl 404 errors that can be safely ignored (vtrefny)
    Resolves: rhbz#1182776
  - Fix the line counting when printing long widgets (vpodzime)
    Related: rhbz#1184378
  - Improve how we set the default screen height in text mode (vpodzime)
    Resolves: rhbz#1184378


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.14-1
changelog:
  - Add RAID swaps to /etc/fstab (bcl)
    Resolves: rhbz#1234469
  - Fix kickstart install with infiniband (jkonecny)
    Resolves: rhbz#1177032
  - Disable Label Entry for PPC PReP Boot (rmarshall)
    Resolves: rhbz#1172773
  - Correctly propagate --ipv6gateway to ifcfg files(mkolman)
    Resolves: rhbz#1170845
  - Ask for encryption passphrase when not specified in ks (vtrefny)
    Resolves: rhbz#1185466
  - Connect scroll adjustments in the right class (dshea)
    Related: rhbz#1189899


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.15-1
changelog:
  - Explicitly try fetching netroot after network kickstart fetch (vpodzime)
    Resolves: rhbz#1238987
  - Refresh advanced disks after disk summary dialog (bcl)
    Resolves: rhbz#1226354
  - Show an alternative prompt if a hub contains only a single spoke (mkolman)
    Resolves: rhbz#1199234
  - Don't crash if incorrect environment is set in kickstart (mkolman)
    Resolves: rhbz#1234890
  - Allow /boot partition on iscsi with ibft (jkonecny)
    Related: rhbz#1164195
  - Make sure we work with fresh data when trying to do netroot (vpodzime)
    Related: rhbz#1082500
  - Make our manual triggering on network in dracut work (vpodzime)
    Resolves: rhbz#1082500
  - Fix broken test by infiniband patch (jkonecny)
    Related: rhbz#1177032


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.16-1
changelog:
  - Ellipsize the file system type combo box (dshea)
    Resolves: rhbz#1212615
  - Shorten the mount point entry to match the capacity entry (dshea)
    Resolves: rhbz#1212615
  - Re-save custom.glade (dshea)
    Resolves: rhbz#1212615
  - Ellipsize comboboxes (dshea)
    Resolves: rhbz#1212615
  - Wrap device labels earlier (dshea)
    Resolves: rhbz#1212615
  - Change text shown to users about the need to dasdfmt. (sbueno+anaconda)
    Related: rhbz#1170653
  - Fix a typo in the dasdfmt dialog box. (sbueno+anaconda)
    Related: rhbz#1170653
  - Enable anaconda to use the new cdl ks option, and detect ldl dasds.
    (sbueno+anaconda)
    Resolves: rhbz#1170656
    Resolves: rhbz#1170653
  - Fix GRUB2 Password Update Scope (rmarshall)
    Related: rhbz#985962
  - Enable Custom GRUB2 Password Utility (rmarshall)
    Related: rhbz#985962


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.17-1
changelog:
  - Check for Gtk before importing escape_markup (bcl)
    Related: rhbz#1236995
  - Add handling for unusable storage configurations. (dlehman)
    Resolves: rhbz#1236995
  - Allow markup in the label/message of DetailedErrorDialog. (dlehman)
    Related: rhbz#1236995
  - Allow passing an optional button list to showDetailedError. (dlehman)
    Related: rhbz#1236995
  - Allow kwargs with gtk_action_wait, gtk_action_nowait decorators. (dlehman)
    Related: rhbz#1236995


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.18-1
changelog:
  - Start the network before the display (dshea)
    Resolves: rhbz#1240732
  - Bump pykickstart version required. (sbueno+anaconda)
    Resolves: rhbz#1241413
  - Set the no network error in refresh() (dshea)
    Resolves: rhbz#1238797
  - Show the event box immediately when setting infobar messages. (dshea)
    Related: rhbz#1238797
  - dracut: fix boot failure waiting for finished/dd.sh (wwoods)
    Related: rhbz#1084197
  - driver_updates: fixes from patch review (wwoods)
    Related: rhbz#1084197
  - dd-refactor: dracut + build bits (wwoods)
    Resolves: rhbz#1084197
    Resolves: rhbz#1164131
    Related: rhbz#1213546
  - parse-kickstart: just emit 'inst.dd=XXX' for driverdisk (wwoods)
    Related: rhbz#1084197
  - parse-kickstart: pylint fixes (wwoods)
    Related: rhbz#1084197
  - dd-refactor: new driver_updates.py + tests (wwoods)
    Related: rhbz#1084197
  - payload: fix driverdisk repos (wwoods)
    Related: rhbz#1084197
  - Always write NTP servers to config files (wwoods)
    Resolves: rhbz#1197575
  - dracut: fix boot with inst.ks and no inst.{repo,stage2} (wwoods)
    Resolves: rhbz#1238987


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.19-1
changelog:
  - Don't ask to start vnc if user specifies text mode. (sbueno+anaconda)
    Resolves: rhbz#1241425
    Related: rhbz#1196721
  - Fix pylint errors in the new driver disk code. (clumens)
    Related: rhbz#1084197
  - Restore RHEL-specific stylesheet data. (dshea)
    Related: rhbz#1196721


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.20-1
changelog:
  - Add support for architecture suffixes in help files (mkolman)
    Related: rhbz#1196721
    Related: rhbz#1072033
  - network: add s390 options to default ifcfg files (rvykydal)
    Resolves: rhbz#1074570


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.21-1
changelog:
  - Remove the last usage of newt and get rid of it as a dependency
    (sbueno+anaconda)
    Related: rhbz#965985
  - Enable anaconda to use the new rescue mode. (sbueno+anaconda)
    Resolves: rhbz#965985
  - Get rid of unnecessary constants in constants_text. (sbueno+anaconda)
    Related: rhbz#965985
  - Get rid of some unnecessary files. (sbueno+anaconda)
    Related: rhbz#965985


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.22-1
changelog:
  - Fix various pylint problems caused by the new rescue mode. (clumens)
    Related: rhbz#965985
  - network: use ibftx interface for iSCSI from iBFT in dracut (rvykydal)
    Resolves: rhbz#1077291
  - Remove text.py from spec file (bcl)
    Related: rhbz#965985


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.23-1
changelog:
  - Handle missing environment without traceback (bcl)
    Resolves: rhbz#1245296
  - Disable a Pylint false-positive (mkolman)
    Related: rhbz#1182562
  - Make sure TUI is readable for non-latin languages (mkolman)
    Resolves: rhbz#1182562
  - Auto-load ks.cfg if OEMDRV volume available. (sbueno+anaconda)
    Resolves: rhbz#1057271
  - dracut: minor cleanup (wwoods)
    Related: rhbz#1168902
  - dracut: fix missing messages for inst.ks=cdrom (wwoods)
    Related: rhbz#1168902
  - Wait forever for kickstarts on CDROM (wwoods)
    Resolves: rhbz#1168902
  - Allow cdrom-swapping when doing "inst.ks=cdrom[:...]" (wwoods)
    Resolves: rhbz#1168902
  - anaconda-lib.sh: add tell_user() and dev_is_cdrom() (wwoods)
    Related: rhbz#1168902


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.24-1
changelog:
  - Add parentheses around the IPV6 regex fragment. (dshea)
    Resolves: rhbz#1246133
  - Add tests for IPv6 literals in URLs (dshea)
    Related: rhbz#1246133
  - Do not set user home to / in advanced user dialog (bcl)
    Resolves: rhbz#1245837
  - Fix Initial PPC PReP Boot Selector Name (rmarshall)
    Resolves: rhbz#1172755


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.25-1
changelog:
  - Add support for autostep and --autoscreenshot (mkolman)
    Resolves: rhbz#1234896
  - Really fix unexpected exits in execReadlines (dshea)
    Related: rhbz#1188287
  - iscsi: display portal (address:port) of node in node list (rvykydal)
    Related: rhbz#1195570


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.26-1
changelog:
  - Prevent incomplete translations from making the TUI unusable (mkolman)
    Resolves: rhbz#1235617
  - Disable a Pylint false-positive (mkolman)
    Related: rhbz#1234896


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.28-1
changelog:
  - Display a EULA-related warning on progress hub at end of installation.
    (sbueno+anaconda)
    Resolves: rhbz#1249185
    Resolves: rhbz#1248432


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.29-1
changelog:
  - Fix a line that still treated the fstype as a GtkComboBoxText (dshea)
    Resolves: rhbz#1248885
  - Fix fastestmirror plugin check (bcl)
    Resolves: rhbz#1249569


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.32-1
changelog:
  - product.img buildstamp should override distribution buildstamp (bcl)
    Resolves: rhbz#1240238
  - Tell libreport if it is a final release or not (vpodzime)
    Resolves: rhbz#1252036
  - On incomplete ks, don't automatically proceed with install. (sbueno+anaconda)
    Resolves: rhbz#1251978
  - Add the "make ci" target. (clumens)
    Related: rhbz#1196721
  - Tweak tmux configuration file (jkonecny)
    Resolves: rhbz#1238799


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.34-1
changelog:
  - Network protocols don't list Closest mirror first (vpodzime)
    Resolves: rhbz#1253196
  - Make sure proper installclass selected for RHEL installs. (sbueno+anaconda)
    Related: rhbz#1196721
  - Fix traceback on tz spoke in text mode (sbueno+anaconda)
    Resolves: rhbz#1252025


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.35-1
changelog:
  - Skip source url checks when network is off (bcl)
    Resolves: rhbz#1251130
  - Don't set net.device to link if there is no ksdevice (bcl)
    Resolves: rhbz#1085310
  - Reading carrier while link is down raises IOError (bcl)
    Related: rhbz#1085310
  - Make sure username entered in TUI if create a user chosen. (sbueno+anaconda)
    Resolves: rhbz#1249660


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.36-1
changelog:
  - Don't write nfs repos to the target system (bcl)
    Resolves: rhbz#1246212
  - Fix nfs mountpoint removal (bcl)
    Related: rhbz#1246212
  - Fix the handling of nfs:// URLs. (dshea)
    Related: rhbz#1246212
  - Start hubs with the buttons insensitive. (dshea)
    Resolves: rhbz#1255752
  - Move locale environment logic into localization.py (dshea)
    Related: rhbz#1198642


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.37-1
changelog:
  - Process excludedGroupList after packages and groups. (clumens)
    Resolves: rhbz#1249036
  - Fix the help button mnemonic display on spokes (dshea)
    Resolves: rhbz#1250918


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.38-1
changelog:
  - Run AnacondaExceptionHandler in cmdline mode (bcl)
    Resolves: rhbz#1256385
  - anaconda.target: Wants systemd-logind.service (awilliam)
    Resolves: rhbz#1257311


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.39-1
changelog:
  - Disallow /boot on lvm until grub2 fully supports it. (dlehman)
    Resolves: rhbz#1252466
  - Force an encoding of utf-8 on liveinst installs (dshea)
    Resolves: rhbz#1257060
  - Ignore zram block devices in the list-harddrives script output (mkolman)
    Resolves: rhbz#1247886
    Resolves: rhbz#1253184


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.40-1
changelog:
  - Skip OEMDRV if interactive DD is requested (bcl)
    Related: rhbz#1254270
  - Copy updated driver ko to correct directory (bcl)
    Related: rhbz#1254270
  - addRepo takes a repo object not a string (bcl)
    Related: rhbz#1254270
  - Drivers are simply under /run/install/DD-x/ (bcl)
    Related: rhbz#1254270
  - Fix a bash error in kickstart-genrules.sh (sbueno+anaconda)
    Resolves: rhbz#1057271
  - Run nm-connection-editor with the --keep-above flag (mkolman)
    Resolves: rhbz#1231856


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.42-1
changelog:
  - Remove a call to execute in storage thread to avoid a threading disaster.
    (sbueno+anaconda)
    Resolves: rhbz#1245268
  - Remove a rogue reference to self.back_clicked. (clumens)
    Related: rhbz#1254548
  - Fix a typo in service enablement in kickstart.py. (clumens)
    Related: rhbz#1252444
  - Verify Initial Setup services are present before turning them ON/OFF
    (mkolman)
    Resolves: rhbz#1252444
  - Set both .format's and .originalFormat's passphrase on unlock (vpodzime)
    Resolves: rhbz#1255679
  - Make the Encrypt checkbox insensitive for encrypted non-BTRFS devices
    (vpodzime)
    Related: rhbz#1255679
  - Make the default screen height yet one line shorter (vpodzime)
    Resolves: rhbz#1184378
  - Don't crash if the Japanese PC-98 keyboard is selected (mkolman)
    Resolves: rhbz#1190589


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.43-1
changelog:
  - Quit in askvnc should not reboot image and dirinstall (bcl)
    Resolves: rhbz#1255069
  - network: assume --device=link as default also for ks on hd (rvykydal)
    Related: rhbz#1085310
  - Don't try to concatenate a list with a string (mkolman)
    Related: rhbz#1252444
  - Always show the Network spoke in Initial Setup (mkolman)
    Resolves: rhbz#1259801
  - Fix hiding curl 404 errors outside debug mode (vtrefny)
    Resolves: rhbz#1182776


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.44-1
changelog:
  - Fix another bash syntax problem in kickstart-genrules.sh (sbueno+anaconda)
    Resolves: rhbz#1057271
  - Install all required packages. (dshea)
    Resolves: rhbz#1260624


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.46-1
changelog:
  - Handle driver rpms retrieved via network (bcl)
    Resolves: rhbz#1257916
  - Use getDiskDescription for disk description strings (bcl)
    Resolves: rhbz#1247861
  - Add getDiskDescription helper function (bcl)
    Related: rhbz#1247861
  - Make sure anaconda reads in ks file from OEMDRV device. (sbueno+anaconda)
    Resolves: rhbz#1057271
  - Try to deal with expected errors from devicetree.populate (vpodzime)
    Resolves: rhbz#1257648


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.47-1
changelog:
  - Show correct status for no %packages with selected environment (mkolman)
    Related: rhbz#1261393
  - Keep environment selection when reentering the software spoke (mkolman)
    Resolves: rhbz#1261393
  - Remove an unused import. (clumens)
    Related: rhbz#1253672
  - Only show the user spoke if no users are specified in kickstart (mkolman)
    Resolves: rhbz#1253672


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.49-1
changelog:
  - Use correct installclass for RHEL Atomic Host (rvykydal)
    Resolves: rhbz#1265213
  - Catch blkid failure in driver-updates (bcl)
    Resolves: rhbz#1262963
  - Maximize anaconda instead of running fullscreen (dshea)
    Related: rhbz#1231856
  - Do not display markup in showDetailedError. (dshea)
    Resolves: rhbz#1263963


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.50-1
changelog:
  - Fix a pylint problem with the ostree patch. (clumens)
    Related: rhbz#1253527
  - Update storage config after running dasdfmt. (sbueno+anaconda)
    Resolves: rhbz#1264411
  - rpmostreepayload: Forcibly unmount everything in sysroot (walters)
    Resolves: rhbz#1253527


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.54-1
changelog:
  - ibft: fix setting dracut boot args for static ibft nic configuration
    (rvykydal)
    Resolves: rhbz#1267526
  - dracut: accept inst.dd=[file:]/dd.iso (wwoods)
    Resolves: rhbz#1268792
  - Fix issues with the date&time not being updated on timezone changes
    (vpodzime)
    Resolves: rhbz#1267450


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.55-1
changelog:
  - network: create ifcfg files in tui if needed (rvykydal)
    Resolves: rhbz#1268155
  - Do not limit ONBOOT default setting to url and nfs installation methods
    (rvykydal)
    Resolves: rhbz#1269264


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.57-1
changelog:
  - Make sure pluginconf.d exists (bcl)
    Resolves: rhbz#1271766
  - Check to see if DD repo is already in addOn list (bcl)
    Resolves: rhbz#1268357
  - Add --sshkey to kickstart sshpw command (bcl)
    Resolves: rhbz#1240410
  - Add sshkey kickstart command (bcl)
    Resolves: rhbz#1311755
  - Fix nfs source crash when options change (bcl)
    Resolves: rhbz#1264071
  - Fix pre-install script execution (bcl)
    Related: rhbz#1311184
  - Add kickstart %pre-install section support (bcl)
    Resolves: rhbz#1311184
  - Fix a race between a window continuing and the next starting (dshea)
    Resolves: rhbz#1255858
  - Don't process continue-clicked events for windows that aren't shown.
    (clumens)
    Related: rhbz#1255858
  - Generate resources.h before compiling widgets-common.c (dshea)
    Related: rhbz#1243929
  - Use CSS to style the internal widgets. (dshea)
    Resolves: rhbz#1243929
  - Lookup IPv6 address without brackets (bcl)
    Resolves: rhbz#1267872
  - Copy rhsm logs to target system (bcl)
    Resolves: rhbz#1130268
  - Add specific error string to TUI user dialog (bcl)
    Resolves: rhbz#1248421
  - Make EditTUIDialog error generic (bcl)
    Related: rhbz#1248421
  - Don't clear the _currentIsoFile if another iso was selected (bcl)
    Related: rhbz#1274855
  - Fix problems with the hdiso method (clumens)
    Resolves: rhbz#1274855
  - Always quote values in ifcfg- files (bcl)
    Resolves: rhbz#1279131
  - Include original kickstart in /root/original-ks.cfg (bcl)
    Resolves: rhbz#1227939
  - Manually set clock shifts on UI idle (rmarshall)
    Resolves: rhbz#1251044
  - Import iutil earlier so we can use ipmi_report from check_for_ssh. (clumens)
    Resolves: rhbz#1267658
  - In tui cmdline mode skip showError and log message (bcl)
    Resolves: rhbz#1280371
  - Fix a typo in the hardware error message. (clumens)
    Resolves: rhbz#1284165
  - Make reclaim work with small screens and big labels (dshea)
    Resolves: rhbz#1262778
  - Use GtkResponseType values in the iso chooser dialog (dshea)
    Resolves: rhbz#1265060


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.58-1
changelog:
  - Add device id to dasdfmt screen. (sbueno+anaconda)
    Resolves: rhbz#1269174
  - Unify displayed columns in custom spoke dialogs. (sbueno+anaconda)
    Resolves: rhbz#1289577
  - Show some confirmation to users if adding a DASD was successful.
    (sbueno+anaconda)
    Resolves: rhbz#1259016
  - Fix dasdfmt during graphical kickstart. (sbueno+anaconda)
    Resolves: rhbz#1269863
  - Improve password salt creation (bcl)
    Resolves: rhbz#1229474
  - Display a fatal error if unable to encrypt a password. (dshea)
    Related: rhbz#1229474
  - NTP should have better behavior (jkonecny)
    Resolves: rhbz#1260725


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.59-1
changelog:
  - Fix a DBus InvalidProperty handling (jkonecny)
    Resolves: rhbz#1315843
  - Fix a bad usage of execWithRedirect (dshea)
    Resolves: rhbz#1270319
  - Use an icon that exists in Adwaita for the dasd confirmation (dshea)
    Related: rhbz#1259016
  - Translate the help button. (dshea)
    Resolves: rhbz#1314451
  - Translate the required space labes in resize.py (dshea)
    Resolves: rhbz#1314451
  - Increase yum debug logging level from 3 to 6 (jkonecny)
    Resolves: rhbz#1254368


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.60-1
changelog:
  - Remove unused import in storage_utils (sbueno+anaconda)
    Related: rhbz#1268025
  - Remove the last instance of singlePV (sbueno+anaconda)
    Resolves: rhbz#1268025
  - Remove duplicate informational message from rescue mode. (sbueno+anaconda)
    Resolves: rhbz#1249082
  - If doing dirinstall on s390x, don't prompt to login via ssh to begin install.
    (sbueno+anaconda)
    Resolves: rhbz#1269207
  - Fix a problem introduced by a cherry-pick (dshea)
    Resolves: rhbz#1317558
    Related: rhbz#1274855
  - Fix duplicate network settings in dracut (jkonecny)
    Related: rhbz#1293539
  - Fix create device with bad name when parsing KS (jkonecny)
    Resolves: rhbz#1293539
  - network: don't traceback when trying to turn off misconfigured team
    connection (rvykydal)
    Resolves: rhbz#1263971
  - network: don't set NM_CONTROLLED=no for root on SAN (rvykydal)
    Resolves: rhbz#1273323
  - Use a lock for repoStore access (bcl)
    Resolves: rhbz#1315414
  - network: use NAME to find ifcfg on s390 with net.ifnames=0 (rvykydal)
    Resolves: rhbz#1249750
  - fix multiple inst.dd=<path> args (rhbz#1268792) (wwoods)
    Resolves: rhbz#1268792
  - network: fix configuring team in kickstart pre (rvykydal)
    Resolves: rhbz#1254929
  - network: Don't set --device link default for hostname only network cmd
    (rvykydal)
    Resolves: rhbz#1272274
  - Make the No Space dialog look less terrible. (clumens)
    Resolves: rhbz#1264328


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.61-1
changelog:
  - Fix crash when new device appear in Welcome screen (jkonecny)
    Resolves: rhbz#1216926
  - Add reason when logging invalid repository (jkonecny)
    Resolves: rhbz#1240379
  - network: fix vlan over bond in kickstart (rvykydal)
    Resolves: rhbz#1234849


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.62-1
changelog:
  - Reset invalid disk selection before proceeding. (dlehman)
    Resolves: rhbz#1265330
  - Fix bad sensitivity on boxes in source spoke (jkonecny)
    Resolves: rhbz#1262833
  - Fix only one address is shown in anaconda (jkonecny)
    Resolves: rhbz#1264400
  - network: copy static routes configured in installer to system (rvykydal)
    Resolves: rhbz#1255801
  - network: fix kickstart --noipv4 option in %pre section (rvykydal)
    Related: rhbz#1291333
  - network: fix kickstart --noipv4 option (rvykydal)
    Resolves: rhbz#1291333


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.63-1
changelog:
  - network: don't set 803-3-ethernet.name setting (rvykydal)
    Resolves: rhbz#1323589
  - Add retry when downloading .treeinfo (jkonecny)
    Resolves: rhbz#1292613
  - Make it possible to skip saving of kickstarts and logs (mkolman)
    Resolves: rhbz#1285519
  - Add a function for empty file creation (mkolman)
    Related: rhbz#1285519
  - Run actions for argparse arguments (mkolman)
    Related: rhbz#1285519


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.64-1
changelog:
  - Exclude software raid block devices from list-harddrives output (mkolman)
    Resolves: rhbz#1311512


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.65-1
changelog:
  - Move the pykickstart version test into a different subdirectory. (clumens)
    Resolves: rhbz#1263367
  - Show network spoke in the TUI reconfig mode (mkolman)
    Resolves: rhbz#1302165
  - iscsi: don't generate kickstart iscsi commands for offload devices (rvykydal)
    Related: rhbz#1252879
  - iscsi: allow installing bootloader on offload iscsi disks (qla4xxx)
    (rvykydal)
    Resolves: rhbz#1325134
  - Fix iSCSI kickstart options aren't generated (jkonecny)
    Resolves: rhbz#1252879
  - Fix adding offload iSCSI devices (vtrefny)
    Resolves: rhbz#1255280


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.66-1
changelog:
  - Check software selection in tui kickstart (bcl)
    Resolves: rhbz#1320436
  - Run the checkSoftwareSelection even when no environment is selected (bcl)
    Resolves: rhbz#1320436
  - Stop kickstart when space check fails (bcl)
    Resolves: rhbz#1320436
  - Fix problem of DASDs not being formatted in text ks. (sbueno+anaconda)
    Resolves: rhbz#1259437


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.67-1
changelog:
  - Combine formatting of LDL and unformatted DASDs. (sbueno+anaconda)
    Resolves: rhbz#1316088
  - Move metacity settings into anaconda. (dshea)
    Resolves: rhbz#1324889


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.68-1
changelog:
  - Update storage snapshot after running dasdfmt. (sbueno+anaconda)
    Resolves: rhbz#1266151
  - Add access to the payload from addons (jkonecny)
    Resolves: rhbz#1288636
  - Update the on-disk snapshot of storage when adv. disks are added (vpodzime)
    Resolves: rhbz#1267944


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.69-1
changelog:
  - Check minimal memory requirements properly (jstodola)
    Resolves: rhbz#1267673
  - Check that cache PVs (if any) are in the VG the LV belongs to (vpodzime)
    Resolves: rhbz#1263258
  - Move settings_changed from NCB to Network Spoke (jkonecny)
    Related: rhbz#1270354
  - Changes in network state revalidate sources rhbz#1270354 (riehecky)
    Resolves: rhbz#1270354


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.70-1
changelog:
  - Don't join two absolute paths (mkolman)
    Related: rhbz#1249598
  - Switch to the new Initial Setup unit name (mkolman)
    Related: rhbz#1249598
  - Don't crash when taking a screenshot on the hub (mkolman)
    Resolves: rhbz#1327456
  - network: validate netmask in tui (rvykydal)
    Resolves: rhbz#1331054


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.71-1
changelog:
  - Do not override StorageChecker.errors in StorageSpoke (vtrefny)
    Resolves: rhbz#1269195
  - Add single language mode (mkolman)
    Resolves: rhbz#1235726
  - Move default X keyboard setting out of the Welcome spoke (mkolman)
    Related: rhbz#1235726
  - bootloader: Use shim on Aarch64. (pjones)
    Resolves: rhbz#1256942
  - Fix bad indentation (rvykydal)
    Related: rhbz#1265593
  - network: don't show libvirt virtual devices (rvykydal)
    Related: rhbz#1298444
  - network: don't crash when adding device without connection to list (rvykydal)
    Related: rhbz#1265593
  - Use a different ipmi command to log events. (clumens)
    Resolves: rhbz#1268195
  - Add missing glib schema dependencies (dshea)
    Related: rhbz#1324889
  - Compile glib schema overrides with --strict. (dshea)
    Related: rhbz#1324889


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.72-1
changelog:
  - Lower required squashfs ram to 350M (bcl)
    Resolves: rhbz#1333113
  - Add epoch for anaconda-user-help & bump version (mkolman)
    Related: rhbz#1275285
  - Specify string format arguments as logging function parameters (mkolman)
    Related: rhbz#1235726


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.73-1
changelog:
  - network: don't crash on devices with zero MAC address (rvykydal)
    Resolves: rhbz#1334632
  - network: fix regression in network tui device configuration (rvykydal)
    Resolves: rhbz#1338620
  - Fix TUI ErrorDialog processing (bcl)
    Resolves: rhbz#1337427
  - Fix a pylint error in the source switch handler mixin (mkolman)
    Related: rhbz#1275771
  - Don't crash when selecting the same hdd ISO again (mkolman)
    Resolves: rhbz#1275771
  - Protect extended partition when ISO file is on logical partition (vtrefny)
    Resolves: rhbz#1255237
  - Fix error handling for s390 bootloader errors (sbueno+anaconda)
    Resolves: rhbz#1260934
  - Move yum.cache to disk after partitioning (bcl)
    Resolves: rhbz#1287438


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.74-1
changelog:
  - Print an error when the kickstart file is missing (bcl)
    Resolves: rhbz#1297380
  - Adapt the pwpolicy defaults to the old behavior (vpodzime)
    Related: rhbz#1240303
  - Ignore addon and anaconda sections in handle-sshpw (bcl)
    Related: rhbz#1240303
  - Ignore %anaconda section in parse-kickstart (bcl)
    Related: rhbz#1240303
  - Add documentation on %anaconda kickstart command (bcl)
    Related: rhbz#1240303
  - TUI pwpolicy setup was supposed to be in __init__ not refresh (bcl)
    Related: rhbz#1240303
  - Fix pylint/translation issues from the pwpolicy patches. (clumens)
    Related: rhbz#1240303
  - Implement %anaconda kickstart section for pwpolicy (bcl)
    Resolves: rhbz#1240303
  - Add pwpolicy support to TUI interface (bcl)
    Related: rhbz#1240303
  - Add pwpolicy for the LUKS passphrase dialog. (bcl)
    Related: rhbz#1240303
  - Add pwpolicy for the user spoke. (bcl)
    Related: rhbz#1240303
  - Use pwpolicy for the root password spoke. (bcl)
    Related: rhbz#1240303
  - hostname: add tooltip to Apply button (rvykydal)
    Related: rhbz#1290858
  - hostname: fix accelerator collision (rvykydal)
    Related: rhbz#1290858
  - hostname: don't set hostname in initrafms of target system (rvykydal)
    Related: rhbz#1290858
  - hostname: set current hostname from target system hostname on demand
    (rvykydal)
    Related: rhbz#1290858
  - hostname: suggest current hostname for storage containers (rvykydal)
    Related: rhbz#1290858
  - hostname: don't set target system static hostname to current hostname
    (rvykydal)
    Resolves: rhbz#1290858


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.75-1
changelog:
  - Add a button to refresh the disk list. (dlehman)
    Resolves: rhbz#1191305
  - Fix some residual issues of dasdfmt in text-mode. (sbueno+anaconda)
    Resolves: rhbz#1259437
  - Only try to restart payload in the Anaconda environment (mkolman)
    Related: rhbz#1270354
  - Make current runtime environment identifiers available via flags (mkolman)
    Related: rhbz#1270354
  - network tui: do not activate device when setting its onboot value (rvykydal)
    Resolves: rhbz#1261864
  - network tui: edit persistent configuration, not active connection (rvykydal)
    Related: rhbz#1261864
  - network: add support for --no-activate kickstart opton (rvykydal)
    Resolves: rhbz#1277975
  - More descriptive message on invalid username (kvalek)
    Resolves: rhbz#1259284
  - Don't mark an empty string for translation. (clumens)
    Related: rhbz#1255094
  - Update the disk summary on Ctrl-A (dshea)
    Resolves: rhbz#1264958
  - Added PROGRESS_REPORT for retry messages (kvalek)
    Resolves: rhbz#1255094
  - Handle unsupported disklabels. (dlehman)
    Related: rhbz#1266199
    Related: rhbz#1294081
  - network: fix filtering of libvirt devices (check for None values) (rvykydal)
    Related: rhbz#1298444
  - NFS DDs installation now works correctly (japokorn)
    Resolves: rhbz#1269915


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.76-1
changelog:
  - Fix a covscan warning about fetch-driver-net (bcl)
    Related: rhbz#1269915
  - network: handle also ifcfg files of not activated virtual devices (rvykydal)
    Resolves: rhbz#1313173
  - network: check onboot value in ksdata, not NM connections (rvykydal)
    Related: rhbz#1341636
    Resolves: rhbz#1313173
  - network: do not activate device on kickstart --onboot="yes" (rvykydal)
    Resolves: rhbz#1341636
  - Use the LUKS device for encrypted swap on RAID (dshea)
    Related: rhbz#1302747
  - Use the LUKS device for swap in fstab (vpodzime)
    Resolves: rhbz#1302747
  - Keep the subdir in driver disk update paths (dshea)
    Resolves: rhbz#1296306
  - Warn about broken keyboard layout switching in VNC (jkonecny)
    Resolves: rhbz#1274228
  - Make the anaconda-generator exit early outside of the installation
    environment (mkolman)
    Resolves: rhbz#1289179


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.77-1
changelog:
  - Add wordwrap to text mode and use it by default (rvykydal)
    Resolves: rhbz#1267881
  - Display storage errors that cause no disks to be selected (bcl)
    Related: rhbz#1340240
  - Overwrite network files when using ks liveimg (bcl)
    Resolves: rhbz#1342639


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.78-1
changelog:
  - Use the RHEL 7 timezone kickstart command version (mkolman)
    Resolves: rhbz#1312135
  - Use the signal handlers to set initial widget sensitivies (dshea)
    Resolves: rhbz#1259742
  - Fix the name sensitivity in the custom spoke. (dshea)
    Resolves: rhbz#1316269
  - Require network for network-based driver disks (dshea)
    Resolves: rhbz#1261024


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.79-1
changelog:
  - Fix adding new VG in Custom spoke can't be applied (jkonecny)
    Resolves: rhbz#1263715
  - Fix pylint errors in Timezone. (dshea)
    Related: rhbz#1312135
  - hostname: don't set installer env hostname to localhost.localdomain
    (rvykydal)
    Related: rhbz#1290858
  - Add the nosave option to the boot option docs file (mkolman)
    Related: rhbz#1285519


author: Brian C. Lane <bcl@redhat.com> - 21.48.22.80-1
changelog:
  - Allow kickstart users to ignore the free space error (dshea)
    Resolves: rhbz#1287308
  - Fix dhcpclass to work both via kickstart and the boot cmdline. (clumens)
    Resolves: rhbz#1293051
  - Add support for device specification variants (mkolman)
    Resolves: rhbz#1200833
  - Add NTP server configuration to the TUI (mkolman)
    Resolves: rhbz#1269399
  - Move the NTP server checking constants to constants.py (mkolman)
    Related: rhbz#1269399
  - Use a constant for the NTP check thread name prefix (mkolman)
    Related: rhbz#1269399


author: <> - 21.48.22.81-1
changelog:
  - network: don't activate bond/team devices regardless of --activate (rvykydal)
    Resolves: rhbz#1358795
  - iscsi: fix getting iscsi target iface of bound target (rvykydal)
    Resolves: rhbz#1359739
  - Clarify a nosave related log message (mkolman)
    Related: rhbz#1285519
  - network: fix ksdata generating for for non-active virtual devices (rvykydal)
    Related: rhbz#1321288
  - network: update kickstart data also with bond bridge slaves (rvykydal)
    Related: rhbz#1321288
  - network: add support for bridge bond slaves (rvykydal)
    Resolves: rhbz#1321288
  - Fix bootDrive driveorder fallback (jkonecny)
    Related: rhbz#1355795
  - Fix bootloader when re-using existing /boot part (jkonecny)
    Related: rhbz#1355795
  - fix style guide test false positive on username variable (rvykydal)
    Related: rhbz#1350375
  - Store logs before anaconda starts (japokorn)
    Resolves: rhbz#1255659
  - DD can now replace existing drivers (japokorn)
    Related: rhbz#1101653
  - tui: use functions instead of fake REs for checking values (rvykydal)
    Related: rhbz#1350375
  - tui: get proper index of entry we are handling in input (rvykydal)
    Related: rhbz#1331054
  - tui: fix user name validity checking (rvykydal)
    Related: rhbz#1259284
    Resolves: rhbz#1350375
  - Change bootloader boot drive fallback (jkonecny)
    Resolves: rhbz#1355795
  - Make it possible to disable sshd service from running. (sbueno+anaconda)
    Resolves: rhbz#1262707
  - Attempt to unload modules updated by a driver disk (dshea)
    Resolves: rhbz#1101653
  - Fix the processing of device nodes as driver disks (dshea)
    Related: rhbz#1269915


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.22.82-1
changelog:
  - Fix needsNetwork() to test only enabled repositories (jkonecny)
    Resolves: rhbz#1361213
    Related: rhbz#1358788
  - Make sure unformatted DASDs are dasdfmted in ks. (sbueno+anaconda)
    Resolves: rhbz#1359865
  - Fix architecutre selection for help content (mkolman)
    Related: rhbz#1260880
  - Fix needsNetwork testing only additional repositories (jkonecny)
    Related: rhbz#1358788
  - Fix retry to download local treeinfo file (jkonecny)
    Related: rhbz#1270354
  - Rename function for better consistency (rvykydal)
    Related: rhbz#1259284
  - Update error message for consistency (rvykydal)
    Related: rhbz#1259284
  - Add more specific username check messages also to gui (rvykydal)
    Related: rhbz#1259284
    Resolves: rhbz#1360334
  - Fix restart payload only when repo needs network (jkonecny)
    Resolves: rhbz#1358788


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.22.83-1
changelog:
  - Fix PropertyNotFoundError PermHwAddress (jkonecny)
    Resolves: rhbz#1364977
  - Fix screenshot taking logic (mkolman)
    Resolves: rhbz#1327456
  - network: don't require gateway for static ipv4 config in TUI (rvykydal)
    Resolves: rhbz#1365532


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.22.84-1
changelog:
  - Ensure LDL DASDs formatted in text ks. (sbueno+anaconda)
    Resolves: rhbz#1259437
  - Run cache hack after moving cache to mounted storage (bcl)
    Resolves: rhbz#1287438
  - Fix reset payload only on network change (jkonecny)
    Resolves: rhbz#1364367
  - Disable strict password quality checking for partial kickstart installations
    (mkolman)
    Related: rhbz#1360263
  - Fix anaconda-pre.service wasn't properly installed (jkonecny)
    Related: rhbz#1255659


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.22.86-1
changelog:
  - network: don't stumble upon new Device.Statistics NM dbus iface (rvykydal)
    Resolves: rhbz#1370099


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.22.87-1
changelog:
  - Drop T from cp command flags when copying driver disk RPMs (mkolman)
    Resolves: rhbz#1269915
  - network: set onboot correctly for vlan on bond device in ks (rvykydal)
    Related: rhbz#1234849
  - network: don't show ibft configured devices in UI (rvykydal)
    Resolves: rhbz#1309661
  - Translate press-c-to-continue correctly in TUI (mkolman)
    Resolves: rhbz#1364539
  - network: don't set empty team slave config for NM (rvykydal)
    Related: rhbz#1254929


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.22.88-1
changelog:
  - Revert "Show network spoke in the TUI reconfig mode (mkolman)"
    Resolves: rhbz#1302165
  - Improved driver disk copying (mkolman)
    Related: rhbz#1269915
  - network: adapt to ibft plugin being enabled by default in NM (rvykydal)
    Resolves: rhbz#1371188


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.22.89-1
changelog:
  - Default policy should not allow empty passwords (mkolman)
    Related: rhbz#1365112
    Related: rhbz#1365032
  - Add unit tests for password quality checking (mkolman)
    Related: rhbz#1365112
    Related: rhbz#1365032
  - Fix password quality checking (mkolman)
    Resolves: rhbz#1365112
    Resolves: rhbz#1365032
  - dud: fix multiple inst.dd=http:// instances stalling in dracut (rvykydal)
    Related: rhbz#1268792


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.22.91-1
changelog:
  - Fix password length in the password policy (mkolman)
    Related: rhbz#1365112
    Related: rhbz#1365032
  - network: avoid registering GTypes from multiple threads (lkundrak)
    Resolves: rhbz#1366271
  - Fix traceback when payload have None as url (jkonecny)
    Resolves: rhbz#1371494
  - Add new Dracut test and fix another ones (jkonecny)
    Related: rhbz#1101653
  - Fix bug when we add set to list (jkonecny)
    Related: rhbz#1101653
  - Add new helper script files to build system (jkonecny)
    Related: rhbz#1101653
  - Add new helper scripts to the README-dd documentation (jkonecny)
    Related: rhbz#1101653
  - Fix driver unload is disabling network settings (jkonecny)
    Related: rhbz#1101653


author: Samantha N. Bueno <sbueno+anaconda@redhat.com> - 21.48.22.93-1
changelog:
  - Accept any non-empty password in non-strict mode (mkolman)
    Resolves: rhbz#1379323
  - Disable the potfile check on the password quality tests (mkolman)
    Related: rhbz#1365112
    Related: rhbz#1365032
  - Fix two trivial typos in the password checking code (mkolman)
    Related: rhbz#1365112
    Related: rhbz#1365032
  - Tweak lambda use in Dracut test (jkonecny)
    Related: rhbz#1101653
  - Add Dracut test for reloading mod dependencies (jkonecny)
    Related: rhbz#1101653


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.94-1
changelog:
  - network: bind slave connections to DEVICE, not HWADDR (rvykydal)
    Related: rhbz#1373360
  - Catch race-condition error reading from in-memory connection being removed
    (rvykydal)
    Related: rhbz#1373360
  - Allow setting up bridge for fetching isntaller image from kickstart
    (rvykydal)
    Resolves: rhbz#1373360


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.95-1
changelog:
  - Close connections to the yum database (vponcova)
    Resolves: rhbz#1362427
  - network: fix --activate for bridge slaves configured via %pre ks (rvykydal)
    Resolves: rhbz#1416655
  - network: activate bridge for first network command in ks via %pre (rvykydal)
    Resolves: rhbz#1416655
  - network: unify slave connection names for ks %pre with ks and gui (rvykydal)
    Resolves: rhbz#1416655
  - network: respect --activate value for bridge from kickstart (rvykydal)
    Resolves: rhbz#1416687


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.96-1
changelog:
  - Add unit test for RepoMDMetaHash object (jkonecny)
    Related: rhbz#1373449
  - Make the comments in payload and yumpayload consistent (jkonecny)
    Related: rhbz#1373449
  - Fix Anaconda forces payload restart when network (not)change (jkonecny)
    Resolves: rhbz#1358778
    Resolves: rhbz#1373449
  - network: index team slave connection names starting with 1 (rvykydal)
    Resolves: rhbz#1401403
  - network: fix --noipv4 via %pre (rvykydal)
    Resolves: rhbz#1418289


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.97-1
changelog:
  - Add inst.waitfornet option (rvykydal)
    Resolves: rhbz#1315160
  - Add support for IPoIB in tui (rvykydal)
    Resolves: rhbz#1366935


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.98-1
changelog:
  - Lock empty root password during kickstart installation (mkolman)
    Resolves: rhbz#1383656
  - Enable multiple inst.stage2 urls (vponcova)
    Resolves: rhbz#1391724
  - Enable multiple inst.ks urls (vponcova)
    Resolves: rhbz#1391724
  - tui: AutoPartSpoke should not be discovered by a hub (vponcova)
    Related: rhbz#1380767
  - Enable to define the autopart type in an install class (vponcova)
    Resolves: rhbz#1380767
  - Always set the default partitioning (vponcova)
    Resolves: rhbz#1380767


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.99-1
changelog:
  - Improved password quality checking (mkolman)
    Resolves: rhbz#1380277
    Resolves: rhbz#1383718
    Resolves: rhbz#1356975
  - Use correct default password quality value (mkolman)
    Related: rhbz#1380277
    Related: rhbz#1383718
  - Use initialization controller for spoke initialization (mkolman)
    Related: rhbz#1380224
  - Add module initialization controller (mkolman)
    Resolves: rhbz#1380224
  - Add the synchronized decorator (mkolman)
    Related: rhbz#1380224
  - Add a signal/slot implementation (mkolman)
    Related: rhbz#1380224


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.100-1
changelog:
  - Fix Driver Disc documentation (jkonecny)
    Related: rhbz#1377233
  - Support DD rpm loading from local disk device (jkonecny)
    Resolves: rhbz#1377233
  - Fix a Pylint warning (mkolman)
    Related: rhbz#1425760
  - Remove redundant help content generation code (mkolman)
    Resolves: rhbz#1428787
  - network: create dracut arguments for iSCSI root accessed via vlan (rvykydal)
    Resolves: rhbz#1374003
  - Add support for RHVH custom storage checking (vponcova)
    Related: rhbz#1412151
  - Enable the install class to customize the storage checking (vponcova)
    Resolves: rhbz#1412151
  - Replace sanity check with more advanced storage checker (vponcova)
    Related: rhbz#1412151
  - Rename StorageChecker to StorageCheckHandler (vponcova)
    Related: rhbz#1412151
  - Perform recursive copying of driver disk RPM repo contents (esyr)
    Resolves: rhbz#1425760
  - Fix a typo in an error message (esyr)
    Related: rhbz#1425760
  - Don't block gui during dasd formating (vponcova)
    Resolves: rhbz#1335465
  - rhev: add /home /tmp /var/log /var/log/audit (dougsland)
    Resolves: rhbz#1422952
  - Increase verbosity of lvmdump in pre logging script (jkonecny)
    Related: rhbz#1255659


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.102-1
changelog:
  - Add support for kickstart %onerror scripts (clumens)
    Resolves: rhbz#1412538
  - Fix partial kickstart software selection in GUI (jkonecny)
    Related: rhbz#1404158
  - Show the network spoke in Initial Setup TUI (mkolman)
    Resolves: rhbz#1302165
  - yum: Always release payload and catch raised exceptions. (vponcova)
    Related: rhbz#979307
  - tui: Treat dependency errors as errors in the software spoke (vponcova)
    Resolves: rhbz#979307
  - tui: Properly initialize the software spoke. (vponcova)
    Related: rhbz#1371229
  - Propagate firstboot --disable to Screen Access Manager (mkolman)
    Related: rhbz#1422867
  - Use Screen Access Manager (mkolman)
    Related: rhbz#1422867
  - Add screen entry/exit callbacks (mkolman)
    Related: rhbz#1422867
  - Add screen access manager (mkolman)
    Resolves: rhbz#1422867
  - Removed unused code in the Software spoke (jkonecny)
    Related: rhbz#1404158
  - Fix selection logic in Software spoke (jkonecny)
    Resolves: rhbz#1404158
  - Support --nohome option in the autopartitioning (vponcova)
    Resolves: rhbz#663099
  - tui: Remember the custom software selection (vponcova)
    Resolves: rhbz#1371229


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.105-1
changelog:
  - gui: show supported locales on Atomic Host installs (jlebon)
    Resolves: rhbz#1429576
  - Specify unit for reserved space in VG (vpodzime)
    Resolves: rhbz#1260887
  - Add support for --chunksize raid kickstart option (vtrefny)
    Resolves: rhbz#1332316


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.106-1
changelog:
  - Pylint fixes (rvykydal)
    Related: rhbz#1429576
  - Make 64-bit kernel on 32-bit firmware work for x86 efi machines (pjones)
    Resolves: rhbz#1310779


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.107-1
changelog:
  - Gtk: Add gi.require_version to specify versions. (vponcova)
    Resolves: rhbz#1433943
  - Use the function we already have for applying disk selection (rvykydal)
    Related: rhbz#1412022
  - Ignore disks labeled OEMDRV (rvykydal)
    Resolves: rhbz#1412022


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.108-1
changelog:
  - Gtk: Fix css selectors. (vponcova)
    Resolves: rhbz#1439766
  - Gtk: Set CSS names on all of the anaconda classes. (dshea)
    Resolves: rhbz#1439766
  - Gtk: Fix deprecated pseudo-classes. (vponcova)
    Resolves: rhbz#1433943
  - Gtk: Fix warnings in anaconda widgets. (dshea)
    Resolves: rhbz#1433943
  - Gtk: Calculate the preferred size of the image. (vponcova)
    Resolves: rhbz#1433943


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.109-1
changelog:
  - Update 64bit grub2 support to reflect packages as they actually landed
    (pjones)
    Related: rhbz#1310779
  - Fix potential bugs reported by Pylint 1.6 (mkolman)
    Related: rhbz#1440190
  - Fix unused variables and imports (mkolman)
    Related: rhbz#1440190
  - Disable Pylint false positives (mkolman)
    Related: rhbz#1440190
  - Fix Pylint LoggingChecker usage (mkolman)
    Resolves: rhbz#1440190
  - Call subprocess.Popen with absolute path to a binary (rvykydal)
    Resolves: rhbz#1411407


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.110-1
changelog:
  - Adapt to treeinfo format change (variants -> addons) (rvykydal)
    Resolves: rhbz#1437510
  - network: fix setting hostname via boot options (rvykydal)
    Resolves: rhbz#1441337
  - Bump version of Pykickstart and Blivet (jkonecny)
    Related: rhbz#1113207
  - Add XFS uuid changer (jkonecny)
    Related: rhbz#1113207
  - Support --when parameter in snapshot (jkonecny)
    Related: rhbz#1113207
  - Add snapshot support (jkonecny)
    Resolves: rhbz#1113207


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.111-1
changelog:
  - Adapt to treeinfo addon section format change (rvykydal)
    Related: rhbz#1437510
  - Make geolocation with kickstart possible (mkolman)
    Resolves: rhbz#1358331
  - Show or hide the content of the expander (vponcova)
    Resolves: rhbz#1441733
  - Fix a typo in anaconda-pre.service (mkolman)
    Resolves: rhbz#1421246


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.112-1
changelog:
  - Properly iterate over kickstart locations in a job (vponcova)
    Resolves: rhbz#1443485
  - Onlyuse devices of the ignoredisk command should be only disks (vponcova)
    Related: rhbz#1327439
  - Fix device_name_is_disk to fully support raid devices (vponcova)
    Resolves: rhbz#1327439


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.113-1
changelog:
  - network: handle multiple connections for one device better (rvykydal)
    Resolves: rhbz#1444887
  - network: catch exception when reading in-memory connection being removed
    (rvykydal)
    Related: rhbz#1444887
  - Compare empty confirmation field against input (mkolman)
    Resolves: rhbz#1438832


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.114-1
changelog:
  - Show the text of completions in the datetime spoke. (vponcova)
    Related: rhbz#1447984
  - Look higher for the combobox associated with an entry (dshea)
    Resolves: rhbz#1447984
  - Fix the addon handlers for the checkbox (vponcova)
    Resolves: rhbz#1448187


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.115-1
changelog:
  - Show a no network warning for network installation source. (vponcova)
    Related: rhbz#1418604
  - Show warnings about enabling the network time (vponcova)
    Resolves: rhbz#1418604
  - Fix generating UUID even for pre snapshots (jkonecny)
    Related: rhbz#1113207


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.116-1
changelog:
  - Allow nonstrict behaviour for all passwords in tui (vponcova)
    Resolves: rhbz#1450326
  - Fix setting errors and warnings in the StorageCheckHandler (vponcova)
    Resolves: rhbz#1453130
  - Mark post inst tools as disabled only if firstboot --disable is used
    (mkolman)
    Resolves: rhbz#1448940
  - Set the default filesystem type from a kickstart file (vponcova)
    Resolves: rhbz#1449099


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.117-1
changelog:
  - Root checking fixes password for password from kickstart (mkolman)
    Related: rhbz#1356966
  - Improve the GUI password checker (mkolman)
    Related: rhbz#1356966
  - Respect changesok policy on root password spoke (mkolman)
    Resolves: rhbz#1356966
  - Update translations of password checking strings (rvykydal)
    Resolves: rhbz#1383911


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.118-1
changelog:
  - rpmostreepayload: [rhel7only] Move tmpfiles to after mount setup (walters)
    Resolves: rhbz#1459623
  - rpmostreepayload: Handle /var as a user-specified mountpoint (walters)
    Resolves: rhbz#1459623


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.121-1
changelog:
  - rpmostreepayload: Stub out payload methods which use `import rpm` (walters)
    Related: rhbz#1462979


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.122-1
changelog:
  - Network spoke freeze when testing availability (jkonecny)
    Related: rhbz#1478970
  - Fix proxy settings badly used when testing repos (jkonecny)
    Resolves: rhbz#1478970
  - installclasses/rhelah: Bump default / to 15GB max (walters)
    Resolves: rhbz#1481768
  - Prevent crash in GUI with incomplete IMSM array (mkolman)
    Resolves: rhbz#1465944
  - Show IDs of DASDs to be formatted in TUI (vponcova)
    Resolves: rhbz#1269174
  - rpmostreepayload: Rollup backport of Fedora patches (walters)
    Resolves: rhbz#1459623
  - Use SHA256 instead of MD5 for repoMDHash (bcl)
    Related: rhbz#1341280
  - Refactor imports in kickstart.py (jkonecny)
    Related: rhbz#1463118
  - Use context manager to check KickstartError (jkonecny)
    Resolves: rhbz#1463118
  - Use KickstartError instead of KickstartParseError (jkonecny)
    Related: rhbz#1463118


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.123-1
changelog:
  - Skip temporarily unavailable checks in the source spoke (mkolman)
    Resolves: rhbz#1365416
  - Fix restart payload thread in Network spoke GUI (jkonecny)
    Related: rhbz#1478970
  - Add the boot option inst.xtimeout (vponcova)
    Resolves: rhbz#1462035
  - Add missing gtk3 required version to spec file (jkonecny)
    Resolves: rhbz#1445648
  - Sort spec required versions alphabetically (jkonecny)
    Related: rhbz#1445648
  - Fix testing of the kickstart version (vponcova)
    Related: rhbz#1412159
  - Add tests for the install class factory and the installclass command
    (vponcova)
    Related: rhbz#1412159
  - Support for the installclass kickstart command (vponcova)
    Resolves: rhbz#1412159
  - Modules with install classes should define __all__ (vponcova)
    Related: rhbz#1412159
  - Refactorization of the installclass.py (vponcova)
    Related: rhbz#1412159
  - timezone: for kickstart allow also timezones not offered by GUI (rvykydal)
    Resolves: rhbz#1452873


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.124-1
changelog:
  - network: add support for kickstart --bindto=mac for virtual devices
    (rvykydal)
    Resolves: rhbz#1328576
  - network: support mac bound network settings as first class (rvykydal)
    Related: rhbz#1328576
  - network: add support for kickstart --bindto=mac for wired devices (rvykydal)
    Resolves: rhbz#1328576


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.125-1
changelog:
  - Fix storage spoke completeness checking (rvykydal)
    Resolves: rhbz#1496416
  - Missing dot in testing availability message (jkonecny)
    Related: rhbz#1478970


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.127-1
changelog:
  - Enable SE/HMC file access to repo (vponcova)
    Resolves: rhbz#1289918
  - Support timeout and retries options in %packages section (vponcova)
    Resolves: rhbz#1448459


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.130-1
changelog:
  - kickstart: use RHEL7_Firewall instead of F28_Firewall (dusty)
    Related: rhbz#1526450
  - kickstart: support firewall --use-system-defaults (dusty)
    Resolves: rhbz#1526450
  - Check payload is set before accessing its data (mkolman)
    Resolves: rhbz#1524785
  - Fix bad bash '*' expansion when loading kernel modules (jkonecny)
    Resolves: rhbz#1519220


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.134-1
changelog:
  - Revert "UI support for configuring certain mitigations (mkolman)"
    Resolves: rhbz#1546267
  - Revert "Performance spoke related CI fixes" (mkolman)
    Related: rhbz#1546267
  - Revert "Fix mitigation toggling with kickstart" (mkolman)
    Related: rhbz#1546267


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.135-1
changelog:
  - Clear errors when a user updates partitioning settings (vponcova)
    Resolves: rhbz#1535781
  - Don't try to create required partitions if there are none (vponcova)
    Resolves: rhbz#1557485
  - Fix parsing of hostname from cmdline for ipv6. (rvykydal)
    Resolves: rhbz#1554271


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.136-1
changelog:
  - Once again fix cmdline error handling. (sbueno+anaconda)
    Resolves: rhbz#1360223
  - Extend the timeout period to 180s in the case of cmdline error.
    (sbueno+anaconda)
    Resolves: rhbz#1360223
  - kickstart: "clearpart --list" does not work (marcel)
    Resolves: rhbz#1561930


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.137-1
changelog:
  - Improve UI feedback for invalid boot on non-iBFT iSCSI devices. (rvykydal)
    Related: rhbz#1562301
  - Add inst.nonibftiscsiboot boot option. (rvykydal)
    Resolves: rhbz#1562301


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.139-1
changelog:
  - installclasses/rhelah: Allow LVM thin and dm-crypt (walters)
    Resolves: rhbz#1546252
  - Ask for a default passphrase if required (vponcova)
    Resolves: rhbz#1436304
  - Add support for setting different types of passwords in TUI (vponcova)
    Related: rhbz#1436304


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.140-1
changelog:
  - Preserve the boot option zfcp.allow_lun_scan (vponcova)
    Resolves: rhbz#1561662
  - Don't display "Alternate Architectures" in product name (rvykydal)
    Resolves: rhbz#1488558


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.143-1
changelog:
  - Add data loss warning to nvdimm reconfigure dialog. (rvykydal)
    Resolves: rhbz#1280500
  - Add UI feedback for disk repopulating after nvdimm reconfiguration.
    (rvykydal)
    Resolves: rhbz#1280500
  - Use only devices specified by nvdimm command for installation. (rvykydal)
    Resolves: rhbz#1280500
  - Add option to reconfigure nvdimm devices into sector mode. (rvykydal)
    Resolves: rhbz#1280500
  - Allow only devices in sector mode to be selected. (rvykydal)
    Resolves: rhbz#1280500
  - Add nvdimm devices to Advanced Storage spoke. (rvykydal)
    Resolves: rhbz#1280500
  - Add kickstart support for nvdimm reconfiguration to sector mode. (rvykydal)
    Resolves: rhbz#1280500


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.144-1
changelog:
  - Don't allow unlocking and using of LUKS2 devices (vponcova)
    Resolves: rhbz#1608251
  - Fix glade accelerator conflicts (rvykydal)
    Related: rhbz#1602436
  - Add nvdimm files to POTFILES.in (rvykydal)
    Related: rhbz#1602436
  - Support nvdimm only on x86_64 (rvykydal)
    Resolves: rhbz#1602436


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.146-1
changelog:
  - Revert "If someone really wants to eject the cdrom, then do it. (jkonecny)"
    Resolves: rhbz#1618408


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.148-1
changelog:
  - Change Skylake Spectre_V2 default to Retpolines (vponcova)
    Resolves: rhbz#1659626
  - nvdimm: update ks data for actions in UI (rvykydal)
    Resolves: rhbz#1620109
  - nvdimm: use pykickstart constant for setting reconfigure mode (rvykydal)
    Related: rhbz#1620109
  - Skip version when processing kernel boot args (jkonecny)
    Resolves: rhbz#1637112
  - Make save button insensitive in LUKS dialog with no input (mkolman)
    Resolves: rhbz#1489713


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.149-1
changelog:
  - Offer only supported sector sizes in NVDIMM reconfiguration dialog (rvykydal)
    Resolves: rhbz#1614049


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.153-1
changelog:
  - Fix tests and add new tests (jkonecny)
    Related: rhbz#1701032
  - Do not calculate hash for disabled repos (jkonecny)
    Related: rhbz#1701032
  - Test proxy only if set (jkonecny)
    Related: rhbz#1701032
  - Add certificate to the repo files (jkonecny)
    Resolves: rhbz#1701032
  - Use SSLOptions for RepoMDMetaHash object (jkonecny)
    Related: rhbz#1701032
  - Use SSLOptions for YUM calls (jkonecny)
    Related: rhbz#1701032
  - Use SSLOptions for Base repository (jkonecny)
    Related: rhbz#1701032
  - Use new ssl certificate KS option for .treeinfo (lars)
    Related: rhbz#1701032


author: Radek Vykydal <rvykydal@redhat.com> - 21.48.22.158-1
changelog:
  - network: use DEVICETYPE for team when updating virtual slaves ifcfgs
    (rvykydal)
    Resolves: rhbz#1680606
  - dracut/parse-kickstart: Set DEVICETYPE instead of TYPE in a team master ifcfg file
    (ptalbert)
    Resolves: rhbz#1680606


author: liuzhilin <liuzhilin@uniontech.com> - 21.48.22.159-1.0.1
changelog:
  - Rebrand:rebrand for anolis
  - Modify the path of the EULA
  - Add kernel_selection
  - Do not select kernel if dual kernel applied


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 1.0.2-1
changelog:
  - Rename and rebase to apache-commons-daemon
  - Get rid of gcj, native conditional compilation
  - Build with maven
  - Update patches to cleanly apply on new version, remove unneeded
  - Clean up whole spec


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 1.0.5-1
changelog:
  - Update to latest version
  - Use maven 3 to build
  - Versionless jars & javadocs
  - Use apache-commons-parent for BR


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 1.0.8-1
changelog:
  - Update to latest upstream (1.0.8)
  - Drop s390/ppc patches (upstream seems to already include them)


author: Dennis Gilmore <dennis@ausil.us> - 1.0.10-2
changelog:
  - $supported_os and $JAVA_OS in configure do not always match 
  - on arches that override supported_os to be the arch we can not find headers


author: Java SIG <java-devel@lists.fedoraproject.org> - 1.0.12-2
changelog:
  - Update for https://fedoraproject.org/wiki/Fedora_19_Maven_Rebuild
  - Replace maven BuildRequires with maven-local


author: Joe Orton <jorton@redhat.com> 0.9.3-7
changelog:
  - use AI_ADDRCONFIG in getaddrinfo() support (#73350)
  - include a working libtool script rather than relying on
   /usr/bin/libtool (#97695)


author: Joe Orton <jorton@redhat.com> 0.9.4-6
changelog:
  - define apr_off_t as int/long/... to prevent it changing
    with _FILE_OFFSET_BITS on 32-bit platforms


author: Joe Orton <jorton@redhat.com> 0.9.4-10
changelog:
  - fix configure check for mmap of /dev/zero
  - just put -D_GNU_SOURCE in CPPFLAGS not _{BSD,SVID,XOPEN}_SOURCE


author: Joe Orton <jorton@redhat.com> 0.9.4-13
changelog:
  - entirely remove 2Gb file size limit from apr_file_copy();
    fixes "svnadmin hotcopy" on repos with >2Gb strings table
  - work around getnameinfo bugs with v4-mapped addresses
  - fix apr_time_exp_get() for dates in 2038 (Philip Martin)


author: Joe Orton <jorton@redhat.com> 0.9.4-14
changelog:
  - enable posixsem and process-shared pthread mutex support, but
    ensure that sysvsem remains the default mechanism


author: Joe Orton <jorton@redhat.com> 0.9.4-15
changelog:
  - add support for setuid/setgid/sticky bits (André Malo)
  - add apr_threadattr_{guardsize,stacksize}_set() (latter by Jeff Trawick)


author: Joe Orton <jorton@redhat.com> 0.9.4-22
changelog:
  - backport fixes from HEAD:
   * correct implementation of nested mutexes
   * support for POSIX semaphores on LP64 platforms


author: Joe Orton <jorton@redhat.com> 0.9.6-5
changelog:
  - add from 0.9.x branch:
   * fix for apr_{uid,gid}_* error handling (r239592)
   * fix for apr_file_ write flushing (r267192)
  - add backport for use of readdir64_r (r265032, r265681, r265684)


author: Joe Orton <jorton@redhat.com> 0.9.6-6
changelog:
  - don't override CFLAGS at build time
  - allow setting TCP_NODELAY and TCP_CORK concurrently
  - use _exit() not exit() in child if exec*() fails (upstream #30913)


author: Joe Orton <jorton@redhat.com> 1.2.2-2
changelog:
  - avoid linking against -lrt
  - don't print -L${libdir} in --libs output
  - don't export -lcrypt/-luuid in .la file


author: Joe Orton <jorton@redhat.com> 1.2.8-6
changelog:
  - merge review (#225253): drop .a archive; drop use of CC/CXX,
    use BuildRequires; drop old Conflicts; URL reference for Source


author: Bojan Smojver <bojan@rexursive.com> 1.2.12-1
changelog:
  - bump up to 1.2.12
  - add dist
  - remove a comment from apr-1.2.7-psprintfpi.patch (applied upstream)


author: Joe Orton <jorton@redhat.com> - 1.4.2-3
changelog:
  - work around alising issue in ring macros (upstream PR 50190)
  - fix buildconf with newer libtool (#670621)


author: Joe Orton <jorton@redhat.com> 0.9.3-3
changelog:
  - make devel package conflict with old subversion-devel
  - run the less crufty parts of the test suite


author: Joe Orton <jorton@redhat.com> 0.9.3-5
changelog:
  - fix to try linking against -ldb first (#90917)
  - depend on openldap, gdbm, db4, expat appropriately.


author: Joe Orton <jorton@redhat.com> 1.2.8-3
changelog:
  - build DBD drivers as DSOs (w/Bojan Smojver, #192922)
  - split out pgsql driver into -pgsql subpackage


author: Joe Orton <jorton@redhat.com> 1.2.8-9
changelog:
  - add rewrite of expat autoconf code (upstream r493791)
  - fix build for new glibc open()-as-macro
  - split out sqlite subpackage


author: Bojan Smojver <bojan@rexursive.com> 1.2.10-1
changelog:
  - bump up to 1.2.10
  - pick up newly checked in MySQL DBD driver directly from ASF
  - remove dbdopen patch (fixed upstream)
  - remove xmlns patch (fixed upstream)
  - remove autoexpat patch (fixed upstream)


author: Bojan Smojver <bojan@rexursive.com> - 1.2.12-1
changelog:
  - bump up to 1.2.12
  - drop MySQL DBD driver, shipped upstream
  - adjust various patches to apply
  - rework tests in %check (1.2.x got tests from trunk)


author: Bojan Smojver <bojan@rexursive.com> - 1.3.2-3
changelog:
  - revert build dependencies, change from -2 didn't help
  - add apr-util-1.3.2-pgsql.patch (remove pgsql_LIBS during detection)


author: Rex Dieter <rdieter@fedoraproject.org> - 4.9.97-2
changelog:
  - Ark needs to know about application/x-source-rpm (#885316)
  - Improve subfolder autodetection (kde review 107634)
  - Don't delete the KPart in the MainWindow destructor (kde review 107635)


author: Jesper Dangaard Brouer <brouer@redhat.com> - 0.0.4-5
changelog:
  - fix issues reported by static analysis tools
    Resolves: rhbz#1027762
  - add man-pages for arptables-{save,restore}
    Resolves: rhbz#1025726


author: Jesper Dangaard Brouer <brouer@redhat.com> - 0.0.4-8
changelog:
  - Add missing long option --set-counters and update documentation
    Corrosponding short option -c was implemented, but undocumented.
    Resolves: rhbz#1050854


author: Miroslav Lichvar <mlichvar@redhat.com> 14:2.1a15-2
changelog:
  - split from tcpdump package (#193657)
  - update to 2.1a15
  - clean up files in /var
  - force linking with system libpcap


author: Miroslav Lichvar <mlichvar@redhat.com> 14:2.1a15-6
changelog:
  - improve init script (#246869)
  - allow -n 0/32 to disable reporting bogons from 0.0.0.0 (#244606)
  - update license tag
  - update ethercodes.dat


author: Miroslav Lichvar <mlichvar@redhat.com> 14:2.1a15-13
changelog:
  - update ethercodes.dat (#577552)
  - mark ethercodes.dat as noreplace
  - fix init script LSB compliance
  - include Debian arp2ethers and massagevendor man pages (#526160)
  - don't include massagevendor-old script anymore


author: Ales Ledvinka <aledvink@redhat.com> - 14:2.1a15-26
changelog:
  - fix permissions related to collected database
  - update ethcodes defaults to current public IEEE OUI-32


author: Ryan Weaver <ryanw@infohwy.com>
changelog:
  [aspell-.27.2-2]
  - Changes from .27.1 to .27.2 (Mar 1, 1999)
  - Fixed a major bug that caused aspell to dump core when used
    without any arguments
  - Fixed another major bug that caused aspell to do nothing when used
    in interactive mode.
  - Added an option to exit in Aspell's interactive mode.
  - Removed some old documentation files from the distribution.
  - Minor changes on to the section on using Aspell with egcs.
  - Minor changes to remove -Wall warnings.


author: Tim Powers <timp@redhat.com>
changelog:
  - built for Powertools 6.1
  - removed serial macro definitions from spec file to make versioning
    consistant with the other packages we ship.
  - changed build root path
  - general spec file cleanups


author: Tim Powers <timp@redhat.com>
changelog:
  - updated to .30.1
  - used build fixes from Ryan Weaver's 0.30.1-1 package on sourceforge
  - updated URL, download/ftp location
  - removed redundant define's at top of spec file


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - (this entry includes some old ones...)
  - update to .31
  - added patch to make it compile with a pickier compiler
  - include /usr/share/pspell


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - update to .31.1. My patch was upstreamed and is no longer needed.
  - new patch added so DESTDIR works properly


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - patch to work around compiler bug(?) wrt. inline functions
  - use CFLAGS and CXXFLAGS
  - set them to -O0 to work around YACB
  - copy libtool files for IA64 support


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - .32
  - remove old patches, add a patch since namespace isn't 
    polluted as much anymore (as opposed to older toolchain)


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - remember to obsolete ispell
  - build the Canadian and British dictionaries here now,
    as part of the main package. Same package names and 
    descriptions.


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - .32.1 bugfix release, obsolete old patch
  - rename to 0.32.1
  - add patch from author to change his email address
  - add spell and ispell compatibility scripts


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - .32.5 bugfix release (also contains improved documentation),
    obsolete old patch
  - the compatibility scripts are now part of the package itself
  - clean up build procedure
  - remove manual.aux file from docs (#16424)


author: Trond Eivind Glomsrød <teg@redhat.com> 0.33.7-1
changelog:
  - 0.33.7 bugfix release. Requested by the author, it fixes
    coredumps in sug-mode and when not using typo-analyses.
    It also contains code cleanups so it compiles with -ansi
  - should fix coredump on IA64 (#49746)


author: Tim Powers <timp@redhat.com>
changelog:
  - fix broken pspell epoch dep
  - create $RPM_BUILD_ROOT/usr/bin by hand
  - remove /usr/doc
  - fix hardcoding of /usr/lib so that we can build on x86_64


author: Adrian Havill <havill@redhat.com> 12:0.50.50.3-18
changelog:
  - make rpm own some unclaimed dirs (#112984, #113778)
  - explicitly claim kbd anbd dat files in /usr/share/aspell
  - a little spec file files cleanup-- macro subs, dir prefix
  - make /usr/lib/aspell; don't make the dictionary packages do it


author: Ivana Varekova <varekova@redhat.com> 12:0.60.3-1
changelog:
  - update to 0.60.3 - (bug 141968) thanks to Dawid Gajownik 
  - add BuildRequires: ncurses-devel, gettext 
  - add config script patch (thanks tmraz@redhat.com)


author: Ivana Hutarova Varekova <varekova@redhat.com> - 12:0.60.6-8
changelog:
  - change summary name
    remove outdated Obsoletes, Conflicts and Provides flag
    fix requirement to install-info (pre -> post)
    move aspell-import to documentation part
    remove exit 0 from scriptlets


author: Marcela Mašláňová <mmaslano@redhat.com> - 3.1.13-8
changelog:
  - at-3.1.13-mailwithhostname.patch in email mention also hostname address
  - at-3.1.13-usePOSIXtimers.patch use POSIX timers, so we won't need
    pm-utils hack anymore
  - at-3.1.13-help.patch update usage
  - systemd-user-sessions.service is used in unit file, so the atd should be
    started after almost all services are up and running
  - 812682 pam support work with new systemd defaults


author: Marcela Mašláňová <mmaslano@redhat.com> - 3.1.13-10
changelog:
  - fix license field
  - fix systemd macros in scriptlets part of the specfile
  - fix selinux patch to apply without fuzz=2


author: Marcela Mašláňová <mmaslano@redhat.com> - 3.1.13-16
changelog:
  - the correct solution is remove smp_flags, they don't work properly on ppc with
    the option mpower7
  - Related: rhbz#1048745


author: Tomáš Mráz <tmraz@redhat.com> - 3.1.13-21
changelog:
  - correct the DST correction when using UTC time specification (#1328832)
  - clear non-job files from at dir and test for write error on fclose
    to fix bogus syslog messages


author: Tomáš Mráz <tmraz@redhat.com> - 3.1.13-23
changelog:
  - fix the ownership of the spool directory (#1414228)
  - document the -n option of atd (#739870)
  - fix handling of the aborted jobs (due to possibly
    temporary conditions) and avoid flooding the syslog


author: Matthias Clasen <mclasen@redhat.com> - 1.18.1-1
changelog:
  - Update to 1.18.1, which includes the previous patch
  - Drop obsolete patch
  - Fix a small memory leak


author: Matthias Clasen <mclasen@redhat.com> - 1.29.3-1
changelog:
  - Update to 1.29.3
  - The Python bindings have been relocated to pyatspi-corba to
    coexist with the new dbus-based bindings


author: Ray Strode <rstrode@redhat.com> 1.32.0-2
changelog:
  - Switch back to orbit stack by default
  http://lists.fedoraproject.org/pipermail/desktop/2010-October/006568.html


author: Matthias Clasen <mclasen@redhat.com> - 0.3.3-1
changelog:
  - Update to 0.3.3
  - Include gtk3 module
  - Drop gtk deps, since we don't want to depend on both gtk2 and gtk3;
    instead own the directories


author: Havoc Pennington <hp@redhat.com>
changelog:
  - Version 0.7
  - add explicit check for required glib2 version before we do the build,
    so we don't end up with bad RPMs on --nodeps builds


author: Colin Walters <walters@verbum.org> - 1.30.0-6
changelog:
  - introspection: Add patch to export pkg-config file; necessary
    for dependent packages to build with introspection.


author: Kalev Lember <kalev@smartlink.ee> - 2.21.1-2
changelog:
  - added missing Conflicts: gtkmm24-devel to -devel subpackage
  - calculate two-digit download directory from three-digit package version


author: Kalev Lember <kalev@smartlink.ee> - 2.22.2-4
changelog:
  - Spec cleanup
  - Actually co-own /usr/share/devhelp/ directory
  - Require base package from -doc subpackage


author: Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-6
changelog:
  - Use new Debian patch, and enable shared libs (they previously failed
    to build on gcc 4).
  - Minor updates to description and README.Fedora file.
  - Fix buildroot name to match FE preferred form.
  - Fixes for custom optimized builds.
  - Add dist tag.


author: Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-8
changelog:
  - Make all devel subpackages depend on their non-devel counterparts.
  - Add /etc/ld.so.conf.d files for -sse and -3dnow, because they don't
    seem to get picked up automatically.


author: Quentin Spencer <qspencer@users.sourceforge.net> 3.6.0-10
changelog:
  - Rebuild for Fedora Extras 5.
  - Add --noexecstack to compilation of assembly kernels. These were
    previously marked executable, which caused problems with selinux.


author: Deji Akingunola <dakingun@gmail.com> - 3.8.2-4
changelog:
  - Don't symlink the atlas libdir on i386, cause upgrade issue (BZ#476787)
  - Fix options passed to gcc when making shared libs


author: Deji Akingunola <dakingun@gmail.com> - 3.8.3-6
changelog:
  - Add '-g' to build flag to allow proper genration of debuginfo subpackages (Fedora bug #509813)
  - Build for F12


author: Deji Akingunola <dakingun@gmail.com> - 3.8.3-15
changelog:
  - Disable the problematic sparc patch
  - Change lapack-devel BR to lapack-static, where liblapack_pic.a now resides.


author: Deji Akingunola <dakingun@gmail.com> - 3.8.4-1
changelog:
  - Update to 3.8.4
  - Build the default package for SSE2 and add a SSE3 subpackage on x86_64
  - Apply patch (and arch defs.) to build on s390 and s390x (Dan Horák)
  - Fix-up build on s390 and s390x (Christian Bornträger)


author: Deji Akingunola <dakingun@gmail.com> - 3.8.4-3
changelog:
  - Apply patch to enable arm build (Patch provided by Jitesh Shah <jiteshs@marvell.com>)
  - Stop turning off throttle checking, upstream frown at it (seems O.K. for Koji)


author: Frantisek Kluknavsky <fkluknav@redhat.com> - 3.10.1-1
changelog:
  - Rebase to 3.10.1
  - Dropped x86_64-SSE2, ix86-SSE1, ix86-3DNow, z10, z196 (uncompilable).
  - Modified incompatible patches.
  - Added armv7neon support, modified archdef from softfp abi to hard abi.
  - Modified Make.lib to include build-id, soname, versioned library name and symlinks.
  - Now builds monolithic libsatlas (serial) and libtatlas (threaded)
    libraries with lapack and blas included.
  - Lapack source tarball needed instead of static library.
  - Disabled cpu throttling detection again (sorry, could not work on atlas
    otherwise, feel free to enable yet again - atlas-throttling.patch).
  - Removed mentions of "Fedora" to promote redistribution.
  - Modified parts of atlas.spec sometimes left in place, work still in progress,
    cleanup needed.


author: Frantisek Kluknavsky <fkluknav@redhat.com> - 3.10.1-7
changelog:
  - change x86_64 archdef to P4, prefetch instruction from hammer is illegal on some pentium 4
  - add -fstack-protector-strong to flags
  - Resolves: rhbz#1070783


author: Frantisek Kluknavsky <fkluknav@redhat.com> - 3.10.1-9
changelog:
  - ppcle patches (conflicting patches modified)
  - tests on ppcle disabled to shorten build time and fit into 24 hour limit
  - resolves bug 1125475
  - aarch64 patches
  - Resolves: rhbz#1061956


author: Jaromir Capik <jcapik@redhat.com> - 3.10.1-10
changelog:
  - patching for Power8 to pass performance tunings and tests on P8 builders
  - re-enabling tests on ppc64le
  - Resolves: rhbz#1125475


author: Jakub Martisko <jamartis@redhat.com> - 3.10.1-11
changelog:
  - apply patches 99 and 110 to all ppc variants
  - build lapack with -frecursive flag (#1176026)
  - fix possible memory leak (#1350536)
  - fix wrong sed substitutions (#1402627)
  - Resolves: rhbz#1350536
  - Related: rhbz#1176026


author: Jakub Martisko <jamartis@redhat.com> - 3.10.1-12
changelog:
  - cleanup: merge the application of ppc patches from previous commit
    into single block
  - Related: rhbz#1350536


author: Michael K. Johnson <johnsonm@redhat.com> 2.0.8-1
changelog:
  - Initial Red Hat package
    Made as few changes as possible relative to upstream packaging to
    make it easier to maintain long-term.  This means that some of
    the techniques used here are definitely not standard Red Hat
    techniques.  If you are looking for an example package to fit
    into Red Hat Linux transparently, this would not be the one to
    pick.
  - attr-devel -> libattr-devel


author: Stephen C. Tweedie <sct@redhat.com> 2.4.1-3
changelog:
  - Add /usr/include/attr to files manifest
  - Fix location of doc files, add main doc dir to files manifest


author: Karsten Hopp <karsten@redhat.com> 2.4.32-2
changelog:
  - add disttag
  - remove trailing dot from summary
  - fix buildroot
  - -devel package requires same libattr version
  - change prereq to Requires(post)
  - escape macro in changelog
  - replace absolute link with relative link (libattr.so)
  - use %doc macro


author: Kamil Dudka <kdudka@redhat.com> 2.4.44-2
changelog:
  - cleanup in BuildRequires
  - updated source URL
  - re-downloaded source tarball from upstream (size changed by one)


author: Kamil Dudka <kdudka@redhat.com> 2.2.44-3
changelog:
  - do not package a static library (#556038)
  - remove multilib patch no longer useful
  - enable parallel make


author: Kamil Dudka <kdudka@redhat.com> 2.2.44-6
changelog:
  - setfattr.1: document supported encodings of values (#587516)
  - getfattr: encode NULs properly with --encoding=text (#650539)
  - getfattr: return non-zero exit code on failure (#660619)
  - walk_tree: do not follow symlink to directory with -h (#660613)


author: Michael Schwendt <mschwendt@fedoraproject.org> - 1:0.3.6-5
changelog:
  - Merge fix from upstream pull request #25 for CVE-2015-7747.
    Test conversion from e.g. 16-bit LE stereo to 8-bit LE mono
    no longer causes corruption.


author: Michael Schwendt <mschwendt@fedoraproject.org> - 1:0.3.6-7
changelog:
  - Merge upstream pull requests #42,#43,#44 from Agostino Sarubbo to fix
    security issues.  CVE-2017-6827, CVE-2017-6828,
    CVE-2017-6829, CVE-2017-6830, CVE-2017-6831,
    CVE-2017-6832, CVE-2017-6833, CVE-2017-6834, CVE-2017-6835,
    CVE-2017-6836, CVE-2017-6837, CVE-2017-6838, CVE-2017-6839


author: Wim Taymans <wtaymans@redhat.com> - 1:0.3.6-9
changelog:
  - Apply security patches. CVE-2018-17095, CVE-2018-13440
  - Resolves: rhbz#1600369, rhbz#1601014, rhbz#1637128


author: Adam Williamson <awilliam@redhat.com> 2.1.3-4
changelog:
  - add in some systemd scriptlets that were missed, including one which
    will cause auditd to be enabled on upgrade from pre-systemd builds


author: Steve Grubb <sgrubb@redhat.com> 2.3.2-1
changelog:
  - New upstream bugfix/enhancement release
  resolves: #982112 Add delay between stopping and starting auditd


author: Steve Grubb <sgrubb@redhat.com> 2.3.3-2
changelog:
  - New upstream bugfix/enhancement release
  resolves: #1053804 - ausearch issues found by ausearch-test
  resolves: #1030409 - ausearch help typo for "-x" option


author: Steve Grubb <sgrubb@redhat.com> 2.4-1
changelog:
  resolves: #1115196 - Add golang bindings for libaudit
  resolves: #1105150 - audispd config file parser fails on long input
  resolves: #1104973 - auparse truncating selinux context after first category
  resolves: #1088593 - auditctl man page examples use deprecated syscalls
  resolves: #1087849 - support for setting loginuid immutable
  resolves: #1073063 - AUDIT_SECCOMP events syscall field is not interpretted
  resolves: #975796  - confusing aulast records for bad logins


author: Steve Grubb <sgrubb@redhat.com> 2.4.1-1
changelog:
  resolves: #963353 - aarch64 userspace auditing needs to be written
  resolves: #1150202 - perf trace sleep 1 does not list any syscall information
  resolves: #1142989 - Update audit package to 2.4.1
  resolves: #1155221 - adjust fstatat naming to match kernel uapi


author: Steve Grubb <sgrubb@redhat.com> 2.4.1-4
changelog:
  - Remove golang bindings added under the following bz
  resolves: #1115196 - Add golang bindings for libaudit


author: Steve Grubb <sgrubb@redhat.com> 2.6.5-4
changelog:
  resolves: #1382397 - write_logs option is not correctly handled
  resolves: #1414812 - Setting log_format to NOLOG make auditd core dump


author: Steve Grubb <sgrubb@redhat.com> 2.7.4-1
changelog:
  resolves: #1367703 - auvirt wasn't supporting date keywords
  resolves: #1396792 - augenrules includes files ending in regexp "rules"
  resolves: #1406525 - ausearch with '--raw' parameter outputs garbage character


author: Steve Grubb <sgrubb@redhat.com> 2.7.5-1
changelog:
  resolves: #1437187 - audit rpm postinstall script points to non-existing file
  resolves: #1437426 - Remove "--backlog_wait_time" from auditctl man page & rules
  resolves: #1437626 - PF_PACKET socket address will cause ausearch to segfault
  resolves: #1438997 - SECCOMP records have wrong syscall


author: Steve Grubb <sgrubb@redhat.com> 2.7.8-1
changelog:
  resolves: #1406887 - auditd validate_email uses obsolete gethostbyname
  resolves: #1448526 - aureport shows the wrong auid "-1"
  resolves: #1475998 - python audit crash if when using AUSOURCE_FILE_POINTER
  resolves: #1482121 - python audit crash dereferencing auparse_state_t le field


author: Steve Grubb <sgrubb@redhat.com> 2.8.1-1
changelog:
  resolves: #982154 - Can't find the "avc" event with the auvirt command
  resolves: #1101605 - Ipv6 seems no working
  resolves: #1399314 - Allow non-equality comparisons for uid and gid fields
  resolves: #1455598 - Default port is wrong in audisp-remote.conf
  resolves: #1476406 - Audit package rebase


author: Steve Grubb <sgrubb@redhat.com> 2.8.4-1
changelog:
  resolves: #1559032 - Rebase audit package to 2.8.4 to pick up bug fixes
  resolves: #1573889 - auditd busy loop in rotate_logs() with num_logs < 2
  resolves: #1534748 - incorrect addr field when using IPv6 for remote logging
  resolves: #1515903 - ausearch-expression man page missing \timestamp_ex
  resolves: #1511606 - aureport AVC report header is incomplete
  resolves: #1504251 - make auditd dump internal state for log writing status


author: Steve Grubb <sgrubb@redhat.com> 2.8.5-1
changelog:
  resolves: #1651761 - Rebase audit package to 2.8.5 to pick up bug fixes
  resolves: #1462178 - audit rule arch changed from b32 to b64 on ppc64le
  resolves: #1614833 - audispd loops reloading config 
  resolves: #1622194 - audisp-remote memory leak when using krb5 
  resolves: #1625156 - audisp-remote wont connect if remote ending action not reconnect
  resolves: #1628626 - aureport -a --failed does not display user_avc events 
  resolves: #1648005 - tcp listener socket fails when ipv6.disable=1 boot command
  resolves: #1650670 - space left in auditd.conf expressed as a percentage 
  resolves: #1663285 - ausearch device/inode missing when using a single file 
  resolves: #1672287 - max_log_file_action "keep_logs" doesn't behave as described


author: Dominic Cleal <dcleal@redhat.com> - 1.1.0-6
changelog:
  - Add patch for Sysconfig module, empty comment lines (RHBZ#1043665)
  - Add check section to run test suite
  - Add patch for testPermsErrorReported test, when root (RHBZ#1043666)
  - Add patch for Shellvars, multivariable exports (RHBZ#1043815)


author: Dominic Cleal <dcleal@redhat.com> - 1.1.0-9
changelog:
  - Add patch for yum-cron.conf incl entry (RHBZ#1058409)
  - Add patch for firewalld.conf incl entry (RHBZ#1058411)
  - Add patch for Grub, foreground option (RHBZ#1059426)
  - Add patch for Yum, spaces around equals (RHBZ#1062614)
  - Add patch for Shellvars, case and same-line ;; (RHBZ#1056541)


author: Dominic Cleal <dcleal@redhat.com> - 1.1.0-10
changelog:
  - Add patch for IPRoute2, hex and hyphen protocols (RHBZ#1063961)
  - Add patch for IPRoute2, slashes in protocols (RHBZ#1063968)


author: Dominic Cleal <dcleal@redhat.com> - 1.1.0-12
changelog:
  - Add patch for Dovecot, mailbox and quote support (RHBZ#1064387)
  - Add patch for Keepalived, virtual server fixes (RHBZ#1064388)
  - Add patch for Krb5, parse braces in values (RHBZ#1066419)


author: Dominic Cleal <dcleal@redhat.com> - 1.1.0-13
changelog:
  - aug_save: return error when unlink fails (RHBZ#1091143)
  - augtool: add aliases to autocomplete (RHBZ#1100076)
  - augtool: remove unused dump-xml arg (RHBZ#1100106)
  - Automounter: parse hostnames with hyphens (RHBZ#1075162)
  - Cgconfig: parse other valid controllers (RHBZ#1112543)
  - Chrony: add lens (RHBZ#1071947)
  - docs: update man page with new commands (RHBZ#1100077)
  - Exports: permit colons for IPv6 client addresses (RHBZ#1067030)
  - Httpd: parse continued, quoted lines (RHBZ#1100551)
  - Ldso: parse hwcap lines (RHBZ#1102629)
  - NagiosCfg: parse nrpe.cfg with Nrpe (RHBZ#1102623)
  - Rmt: add lens (RHBZ#1100549)
  - Services: permit colons in service name (RHBZ#1121527)
  - Shellvars: support arithmetic expansion (RHBZ#1100550)
  - Syslog: parse TCP loghosts (RHBZ#1129386)
  - Syslog: parse IPv6 loghost addresses (RHBZ#1129388)
  - Systemd: parse /etc/sysconfig/*.systemd (RHBZ#1083022)
  - Systemd: parse quoted environment vars (RHBZ#1100547)


author: Dominic Cleal <dcleal@redhat.com> - 1.1.0-14
changelog:
  - Kdump: parse new options, EOL comments (RHBZ#1139298)
  - Rsyslog: parse property filters and templates (RHBZ#1138402)
  - Systemd: parse semicolons inside entry values (RHBZ#1139498)
  - Systemd: parse environment variables where value is quoted (RHBZ#1138508)


author: Dominic Cleal <dcleal@redhat.com> - 1.1.0-16
changelog:
  - Iptables: parse /etc/sysconfig/iptables.save (RHBZ#1144651)
  - Lvm: parse /etc/lvm/lvm.conf (RHBZ#1145495)
  - Shadow: add lens (RHBZ#1145249)


author: Dominic Cleal <dcleal@redhat.com> - 1.4.0-1
changelog:
  - Rebase to Augeas 1.4.0
  - Revert some changes for better compatibility with 1.1.0-17:
    * Dhcpd: keep 1.1.0 behaviour, add Dhcpd_140 for 1.4.0 features
    * Dnsmasq: revert splitting of address/server options
    * Dovecot: restore quotes within values
    * Jaas: revert semicolon and line break changes
    * Slapd: keep 1.1.0 behaviour, add Slapd_140 for 1.4.0 features
    * Sshd: keep 1.1.0 behaviour, add Sshd_140 for 1.4.0 features
    * Syslog: restore tree without protocol for UDP hosts
    * UpdateDB: keep Simplevars to load config by default


author: Pino Toscano <ptoscano@redhat.com> - 1.4.0-4
changelog:
  - Fix CVE-2017-7555, improper handling of escaped strings (RHBZ#1481546)
  - Skip testSaveNoPermission when running as root (RHBZ#1269817)
  - Chrony: allow signed numbers (RHBZ#1302017)
  - Krb5: support includedir (RHBZ#1406111)


author: Pino Toscano <ptoscano@redhat.com> - 1.4.0-5
changelog:
  - Cgconfig: allow fperm & dperm in admin & task (RHBZ#1325741)
  - Grub: handle top-level "boot" directive (RHBZ#1484261)


author: Pino Toscano <ptoscano@redhat.com> - 1.4.0-9
changelog:
  - Add "Provides: bundled(gnulib)" to augeas-libs, as it embeds gnulib
    (RHBZ#1653766)
  - Anaconda: new lens (RHBZ#1657189)


author: Pino Toscano <ptoscano@redhat.com> - 1.4.0-10
changelog:
  - Krb5: support realms that start with numbers; add more pkinit_* options;
    improve handling of [dbmodules]; allow include/includedir directives
    everywhere (RHBZ#1670420)
  - Grub: handle '+' in kernel command line options (RHBZ#1758357)


author: Nalin Dahyabhai <nalin@redhat.com> 4.2-1
changelog:
  - port to glib2
  - move post code to the back-end
  - add a libglade GUI in a -gtk subpackage
  - set up to use userhelper


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.1-1
changelog:
  - fix setting of LDAP TLS option in authconfig-gtk
  - change Apply to Ok, Close to Cancel, because that's how they work


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.2-1
changelog:
  - make setting of experimental options only possible through
    /etc/sysconfig/authconfig, to keep accidents from happening
  - add some more support for experimental stuff


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.3-1
changelog:
  - add some more experimental options
  - clean up the glade files a bit
  - don't destroy a garbage pointer on main cancel, destroy the main dialog


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.4-1
changelog:
  - add python bindings for the back-end
  - redo the gui so that it exercises the python bindings
  - take a shot at getting authconfig to work in a firstboot container


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.5-1
changelog:
  - actually free authInfo structures when asked to
  - use pam_krb5's account management facilities
  - conflict with versions of pam_krb5 which don't offer account management


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.8-5
changelog:
  - remove bogus buildrequires left over from when authconfig-gtk was C code
  - buildrequires python-devel in addition to python (to build the python module,
    but we still need python to byte-compile the python script)


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.9-1
changelog:
  - add --enable-experimental to enable some of that experimental code
  - add --enable-local to enable local policies
  - update translations


author: Nalin Dahyabhai <nalin@redhat.com> 4.2.10-3
changelog:
  - include the userhelper configuration file
  - require sufficiently-new pam package in the gui subpackage


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - add 'redhat-config-authentication' as an alias for authconfig-gtk
  - make authconfig-gtk exec authconfig if gui startup fails and it looks like
    we're connected to a tty


author: Nalin Dahyabhai <nalin@redhat.com> 4.3.7-1
changelog:
  - authconfig-gtk: condrestart certain additional services if invoked with
    the --firstboot flag (half of #91268, needs cooperating firstboot)
  - translation updates


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - rework tui to include winbind options. there wasn't enough room in the old
    dialog to include the important options, so the whole thing's been reworked


author: Nalin Dahyabhai <nalin@redhat.com> 4.6-1
changelog:
  - authconfig-gtk.py: require rhpl, which is required by the script (#104209)
  - both: require usermode (authconfig-gtk transitively), else leave a dangling
    symlink (#104209)
  - the great redhat-config-authentication/system-config-authentication renaming,
    as was foretold in the fedora-config-list archives


author: Nalin Dahyabhai <nalin@redhat.com> 4.6.1-1
changelog:
  - fix man page: --enableldapssl should be --enableldaptls
  - make --enableldapssl an alias for --enableldaptls


author: Nalin Dahyabhai <nalin@redhat.com> 4.6.2-1
changelog:
  - learn all about pam_passwdqc
  - preserve arguments to pam_cracklib and pam_passwdqc
  - short-circuit PAM authorization checks for users with UID < 100
  - remove redhat-config-authentication as a way to invoke the GUI tool (#115977)


author: Nalin Dahyabhai <nalin@redhat.com> 4.6.3-1
changelog:
  - omit the "ads" or "rpc" when calling "net join", Samba's smarter now (#122802)
  - properly warn about missing "net" (samba-client) and libnss_winbind and
    pam_winbind (samba-common) in text mode (#122802)


author: Nalin Dahyabhai <nalin@redhat.com> 4.6.4-1
changelog:
  - tweak account management to fix #55193 correctly
  - require anything we might want to run in the gui subpackage because it
    doesn't warn about missing things and you don't have a terminal to see
    error messages about missing commands
  - properly display the domain in the GUI join dialog (#124621)


author: Jindrich Novy <jnovy@redhat.com> 4.6.4-2
changelog:
  - modified authconfig-gtk interface to fit lower resolution screens (#127175)
  - modified accelerators in authconfig-gtk (#125797)
  - updated package dependencies (#125306)


author: Jindrich Novy <jnovy@redhat.com> 4.6.4-5
changelog:
  - fixed all po files to translate correctly messages with modified accelerators (#133742)
  - added translations for Arabic, Bulgarian and other languages (#133716, #133158)


author: Tomas Mraz <tmraz@redhat.com> - 4.6.7-1
changelog:
  - updated translations
  - winbind in authconfig-gtk.py was setting the nsswitch.conf on the auth tab
  - use GtkComboBox instead of deprecated GtkOptionMenu
  - disable options with not installed binaries, remove unnecessary deps of
    authconfig-gtk


author: Tomas Mraz <tmraz@redhat.com> - 4.6.8-1
changelog:
  - add option for making local authorization sufficient for local users
    this is attempt to 'solve/workaround' the problem with blocking local logins by
    pulling out network cable (#115181)


author: Tomas Mraz <tmraz@redhat.com> - 5.0.0-1
changelog:
  - C code completely rewritten in Python
  - some bugs fixed in the process (and no doubt new introduced)
  - TUI deprecated, opens only when run as authconfig-tui


author: Tomas Mraz <tmraz@redhat.com> - 5.0.2-1
changelog:
  - authinfo-tui.py is now symlink
  - reword the CA certificate message (#154317)
  - use include instead of pam_stack in pam config
  - don't break yp.conf with multiple domains (#127306)


author: Tomas Mraz <tmraz@redhat.com> - 5.0.3-1
changelog:
  - add symlinks to python scripts in sbindir
  - don't override nullok setting from system-auth (#96996)


author: Tomas Mraz <tmraz@redhat.com> - 5.0.4-1
changelog:
  - don't ignore krb5realm command line option (#174838)
  - read dns_lookup_realm and dns_lookup_kdc values correctly
  - the PAM configuration is now written in system-auth-ac file
    which is then symlinked from system-auth, the symlink is not
    overwritten so local PAM configuration is now possible (#165342)


author: Tomas Mraz <tmraz@redhat.com> - 5.2.0-1
changelog:
  - redesigned GUI (#178112)
  - added man page for system-config-ac (#179584)
  - disable authentication of system accounts by network services
    by default, added option for changing that (#179009)
  - updated translations, new languages


author: Tomas Mraz <tmraz@redhat.com> - 5.2.2-1
changelog:
  - add try_first_pass option to pam_unix for better integration
    with individual service configurations (#182350)
  - updated translations


author: Tomas Mraz <tmraz@redhat.com> - 5.2.4-1
changelog:
  - added crond to the services restarted after firstboot (#187334)
  - when checking nscd status redirect output to /dev/null (#188555)


author: Tomas Mraz <tmraz@redhat.com> - 5.2.5-1
changelog:
  - write ldap servers as URIs and not HOSTs (#191842)
  - fix a typo in --test output
  - updated summary, converted changelog to UTF-8


author: Tomas Mraz <tmraz@redhat.com> - 5.3.1-1
changelog:
  - screensavers should be authenticated by smartcard too
  - add feature to download a CA certificate for LDAP from 
    an URL (#197103)
  - add pam_keyinit session module to the PAM configuration (#198638)


author: Ray Strode <rstrode@redhat.com> - 5.3.3-2
changelog:
  - write out new "wait_for_card" config option if we're
    forcing smart card authentication
  - add "use_uid" option to smart card pam_succeed_if line to
    work around bug where pam_succeed_if checks user information
    even in cases where the conditional doesn't depend on it.
  - remove unimplemented "logout" smart card removal action from
    settings
  - remove unnecessary "card_only" argument


author: Tomas Mraz <tmraz@redhat.com> - 5.3.5-1
changelog:
  - improve smart card related UI strings
  - removed possibility to set smart card type from authconfig-gtk
    as only coolkey will be supported for now


author: Tomas Mraz <tmraz@redhat.com> - 5.3.6-1
changelog:
  - skip pam_unix for session for crond service
  - fixed a bug in saving when smartcard settings changed (#204838)
  - removed allow_ypbind setsebool as it is now handled in ypbind


author: Tomas Mraz <tmraz@redhat.com> - 5.3.7-1
changelog:
  - improve PAM setup for smart card login
  - support smart card login with kerberos (PKINIT)
  - add pam_pkcs11 to password PAM stack


author: Tomas Mraz <tmraz@redhat.com> - 5.3.9-1
changelog:
  - updated translations (#207095)
  - correctly write pam_smb.conf with only one server specified (#208365)


author: Tomas Mraz <tmraz@redhat.com> - 5.3.10-1
changelog:
  - fixed passwd PAM stack when PKCS11 enabled (#195960)
  - make authconfig --probe work again (#209676)


author: Tomas Mraz <tmraz@redhat.com> - 5.3.12-1
changelog:
  - when pam_krb5 auth fails with smartcard login don't enforce it
    in the account stack (#214931)
  - updated translations (#216570)
  - winbind should be added only to user tables (#216862)


author: Tomas Mraz <tmraz@redhat.com> - 5.3.13-1
changelog:
  - another traceback in --probe and other fixes (#218874)
  - make smbRealm a default realm when appropriate (#219300)
  - added missing languages in LINGUAS


author: Tomas Mraz <tmraz@redhat.com> - 5.3.13-4
changelog:
  - local nis domain is obtained from sysconfig/network (#235927)
  - set "local authorization is sufficient" on by default


author: Tomas Mraz <tmraz@redhat.com> - 5.3.14-1
changelog:
  - authconfig.8 synopsis fixed (patch by Eric Raymond) (#220574)
  - drop explicit requirement on python version as it is now 
    generated automatically
  - improve writing /etc/samba/smb.conf (based on patch by
    Simo Sorce)
  - merge changes upstream


author: Tomas Mraz <tmraz@redhat.com> - 5.3.15-1
changelog:
  - dnsclient fixes by Simo Sorce
  - add Categories to .desktop file (#245868)
  - fixed traceback when calling joinDomain (#245374)
  - disable smart card action setting when gnome-screensaver
    not installed (#209643)
  - do not change protocols and services in nsswitch.conf (#236669)


author: Tomas Mraz <tmraz@redhat.com> - 5.3.17-1
changelog:
  - remove obsolete pam_krb5afs support (#250704)
  - add support for pam_access (#251360)
  - update translations


author: Tomas Mraz <tmraz@redhat.com> - 5.3.19-1
changelog:
  - support new sha256 and sha512 password hash algorithms
  - add support for pam_mkhomedir (#212790)
  - do not crash in authconfig --help (#237956) - thanks to Andy Shevchenko for
    the idea how to fix that
  - setup password hash algorithm in /etc/login.defs (#218652)
  - update translations


author: Tomas Mraz <tmraz@redhat.com> - 5.4.0-1
changelog:
  - include config-util in console.apps files
  - add support for saving/restoring backups of configuration
    files affected by authconfig (#433776)
  - improve the authconfig manual page (#432023, #432938)


author: Tomas Mraz <tmraz@redhat.com> - 5.4.2-1
changelog:
  - read wins setting from nsswitch.conf correctly (#440459)
  - do not ignore --enablemd5/--disablemd5 options


author: Tomas Mraz <tmraz@redhat.com> - 5.4.3-1
changelog:
  - remove the --enableldapssl alias and add some help to GUI tooltips
    to clear up some confusion (#220973)
  - add option --enablepreferdns to prefer DNS over NIS or WINS in
    hostname resolution


author: Tomas Mraz <tmraz@redhat.com> - 5.4.5-1
changelog:
  - improved cacertdir_rehash to be more robust
  - add fingerprint reader support (original patch by Bastien Nocera) (#469418)
  - remove pam_smb support from GUI and TUI
  - fix nscd pid file path (#471642)


author: Tomas Mraz <tmraz@redhat.com> - 5.4.7-1
changelog:
  - move the consolehelper symlinks to the gtk subpackage to remove
    the dependency on usermode in the base package (#480014)
  - return nonzero exit codes on some more possible errors (#440461)


author: Tomas Mraz <tmraz@redhat.com> - 6.0.0-1
changelog:
  - support for SSSD enabling/disabling and basic support for
    SSSD domain setup
  - safe atomic overwrites of the config files


author: Tomas Mraz <tmraz@redhat.com> - 6.0.1-1
changelog:
  - do not try to write smartcard settings if pam_pkcs11 is not
    installed (#528458)
  - make position of sss in nsswitch consistent with position in
    system-auth (#552501)
  - support nss_ldap/pam_ldap split and nslcd


author: Tomas Mraz <tmraz@redhat.com> - 6.1.0-1
changelog:
  - new very much simplified GUI
  - use SSSD instead of legacy ldap/krb5 if the configuration is
    supported
  - drop krb4 config file write (#569612)
  - handle exception when running with insufficient priviledges (#572534)
  - support RFC2307bis LDAP schema


author: Tomas Mraz <tmraz@redhat.com> - 6.1.1-1
changelog:
  - added credential caching enablement for SSSD
  - added msgarea for LDAP authentication requirements
  - fix spurious missing modules warnings and other minor changes


author: Tomas Mraz <tmraz@redhat.com> - 6.1.2-1
changelog:
  - fix SSSD provider change (#577263)
  - drop LDAP authentication from FreeIPA choice
  - updated translations
  - use pam_oddjob_mkhomedir if the appropriate package is installed (#552485)


author: Tomas Mraz <tmraz@redhat.com> - 6.1.3-1
changelog:
  - manual page improvements (#578258, #526164)
  - use ldap instead of sss for nsswitch maps unsupported by sssd (#578325)
  - call cacertdir_rehash also in case ldaps: server uri is used (#578219)
  - ldap_uri must be comma separated (#579881)
  - updated translations
  - new icon (#540249)


author: Tomas Mraz <tmraz@redhat.com> - 6.1.4-1
changelog:
  - set the new icon also for the windows (#583330)
  - updated translations
  - disable non-smartcard PAM stacks if require smart card for authentication
  - remove pam_pkcs11 from the password PAM stack
  - set smartcard action also in gconf
  - properly set the options for pam_pkcs11
  - do not write pam_password option to nslcd.conf (#585953)


author: Tomas Mraz <tmraz@redhat.com> - 6.1.5-1
changelog:
  - fix FreeIPA configuration (#589751)
  - disable the krb5 inputs if using dns discovery (#591681)
  - fix GUI crash on revert
  - add pam_sss to password-auth password stack (#592872)


author: Tomas Mraz <tmraz@redhat.com> - 6.1.6-1
changelog:
  - remove superfluous space in nsswitch.conf (#595265)
  - always write to 'default' domain in sssd.conf only (#598558)
  - update pam and nsswitch config only when needed


author: Tomas Mraz <tmraz@redhat.com> - 6.1.8-1
changelog:
  - add pam_systemd to the PAM configuration (#612712)
  - fix force smarcard setting read when Kerberos enabled (#620475)
  - fix duplication of dialogs when the revert is cancelled (#621632)
  - add --enable/disableforcelegacy option (#605857)


author: Tomas Mraz <tmraz@redhat.com> - 6.1.9-1
changelog:
  - removed support for setting up pam_smb_auth authentication - long
    ago deprecated
  - added code for better synchronization of files with duplicate
    settings such as login.defs, libuser.conf and system-auth-ac (#565521)


author: Tomas Mraz <tmraz@redhat.com> - 6.1.11-1
changelog:
  - do not restart services when configuration did not change
  - dissallow setting identity or authentication services with missing
    installed files (#590447)
  - eliminate unnecessary updates of PAM config files and sssd.conf (#639978)
  - updated translations from Transifex


author: Tomas Mraz <tmraz@redhat.com> - 6.1.12-1
changelog:
  - give proper warnings on missing packages if configuration
    supported by SSSD (#663882)
  - do not delete mdns4_minimal from nsswitch.conf (#645295)
  - updated translations from Transifex


author: Tomas Mraz <tmraz@redhat.com> - 6.1.14-1
changelog:
  - new hi-res icon (#702666)
  - use krb5_server instead of krb5_kdcip (#677766)
  - print error message if authconfig-gtk is not run within proper X environment


author: Tomas Mraz <tmraz@redhat.com> - 6.1.15-1
changelog:
  - add support for reading UID_MIN from login.defs (#717112)
  - use systemctl if available instead of chkconfig/service (#696490)
  - mention the /usr/sbin/authconfig in the manual page (#698377)
  - drop the no longer touched files from authconfig manual page
    add the newly touched ones (#708850)


author: Tomas Mraz <tmraz@redhat.com> - 6.1.16-1
changelog:
  - fix broken --help output for languages without spaces (#734355)
  - enable translation of the --help option description (#734303)
  - updated translations from Transifex


author: Tomas Mraz <tmraz@redhat.com> - 6.1.17-1
changelog:
  - fix wrong exit value of --savebackup action
  - do not crash on broken SSSD configuration
  - use pam_pwquality instead of pam_cracklib


author: Tomas Mraz <tmraz@redhat.com> - 6.2.2-1
changelog:
  - use the new --noac option with ipa-client-install
  - add sss to the services entry in nsswitch.conf
  - call res_init() to reread resolv.conf before res_send()
  - updated translations


author: Tomas Mraz <tmraz@redhat.com> - 6.2.3-1
changelog:
  - fix missing linkage to libresolv
  - add missing requires of openssl binary for cacertdir_rehash
  - install missing packages via PackageKit (original patch by Stef Walter)
  - add pam_lastlog to postlogin PAM configuration to display failed login
    attempts
  - enable the allow_ypbind SELinux boolean when enabling NIS
  - try to preserve the dns_lookup_kdc and dns_lookup_realm settings
  - do not use cached_login in password stack for pam_winbind


author: Tomas Mraz <tmraz@redhat.com> - 6.2.4-1
changelog:
  - backup also passwd and friends when toggling enableshadow (#853074)
  - use the new smb.conf idmap config range syntax (#850824)
  - use local_users_only with pam_pwquality (#849072)
  - enable the authlogin_nsswitch_use_ldap SELinux boolean when enabling LDAP (#846084)
  - preserve the value of cache_credentials in sssd.conf
  - do not fail PAM session if pam_lastlog module fails
  - use sssd also for automount map (#847823)
  - enable deferred_kinit if cache_credentials is enabled (#814384)


author: Tomas Mraz <tmraz@redhat.com> - 6.2.5-1
changelog:
  - fix missing cache_credentials option when saving sssd.conf
  - do not try to start/restart sssd with incomplete default domain
  - add autofs to sssd.conf activated services
  - add pam_winbind to session pam modules


author: Tomáš Mráz <tmraz@redhat.com> - 6.2.6-1
changelog:
  - add use_first_pass to pam_sss in password stack
  - more robust initialization of sssdConfig
  - check whether base DN value is a real base DN
  - use non-deprecated pam_pwquality option authtok_type= instead of type=
  - update lastlog for su


author: Tomáš Mráz <tmraz@redhat.com> - 6.2.7-1
changelog:
  - samba-winbind-clients package contains the nsswitch and pam modules (#919117)
  - do not drop sss from nsswitch.conf on --update (#980861)
  - writing out smartcard/fingerprint auth policy to dconf (original patch by
    Ray Strode) (#990625)
  - document other possible return codes from authconfig invocation (#991804)
  - print error message if config file save fails (#994596)
  - never stop rpcbind (#990788)
  - do not disable sssd.service when --enablesssd is used (#953851)
  - revert use_first_pass addition to pam_sss in password stack (#953116)


author: Tomáš Mráz <tmraz@redhat.com> - 6.2.8-1
changelog:
  - detect invalid LDAP uri and report error
  - fix handling of IPA domain join errors and uninstall
  - add support for winbind authentication over Kerberos 5
  - set umask=077 by default for pam_mkhomedir and pam_oddjob_mkhomedir
  - better error checking for password quality options


author: Tomáš Mráz <tmraz@redhat.com> - 6.2.8-2
changelog:
  - updated translations
  - make pam_pkcs11 not ignore the wait_for_card option
  - gnome-screensaver does not exist anymore


author: Tomáš Mráz <tmraz@redhat.com> - 6.2.8-7
changelog:
  - check nslcd for restart when --enableforcelegacy is used
  - call restorecon on newly created configuration files


author: Tomáš Mráz <tmraz@redhat.com> - 6.2.8-8
changelog:
  - enable/start sssd only when config exists or enabled
    for both pam and nsswitch.conf
  - updated translations


author: Tomáš Mráz <tmraz@redhat.com> - 6.2.8-9
changelog:
  - do not overwrite special ldap base values
  - display error message if winbind or IPA domain join fails
  - fix invocation of IPA domain join from GUI
  - keep altfiles in nsswitch.conf if present (#1134084)
  - the winbind client is now in samba-winbind package (#1084997)
  - correct handling of SSSD enablement during IPA domain joins
  - do not bail out if multiple LDAP URIs are specified (#1142830)


author: Tomáš Mráz <tmraz@redhat.com> - 6.2.8-10
changelog:
  - fix title of IPA domain join window (#1166119)
  - add --unattended to IPA uninstall command (#1166131)
  - do not mistake comment for krb5 realm name (#1184639)
  - do not traceback with incorrect locales (#1187020)
  - correct the package needed for winbind (#1190226)
  - install empty /etc/sysconfig/authconfig file (#1194698)
  - let SSSD prompt non-local users for passwords (#1204864)
  - add includedir /var/lib/sss/pubconf/krb5.include.d/ to krb5.conf (#1207552)
  - pass the password provided by --winbindjoin to net join (#1225089)


author: Tomáš Mráz <tmraz@redhat.com> - 6.2.8-11
changelog:
  - add trigger to change pam configuration to use pam_oddjob_mkhomedir
    instead of pam_mkhomedir if oddjob-mkhomedir is installed
  - remove unusable --winbindtemplateprimarygroup option (#1242878)
  - handle inconsistency when missing realm in krb5.conf
  - sort the /etc/sysconfig/authconfig on write (#1320943)
  - avoid unnecessary update of nsswitch.conf
  - add support for myhostname nsswitch module (#1329943)


author: Pavel Březina <pbrezina@redhat.com> - 6.2.8-26
changelog:
  - CVE-2017-7488 authconfig: Information leak when SSSD is used for authentication against remote server (#1441604)


author: Adrian Havill <havill@redhat.com> - 1.0.0-2
changelog:
  - Obsolete pidentd -- authd and pidentd can't/shouldn't coexist on FC/RHEL
  - license tweak to allow openssl under any condition
  - no spec url needed; package is not worthy enough.


author: Adrian Havill <havill@redhat.com> - 1.2.0-1
changelog:
  - A few tweaks in the cmdline options for orthagonality
  - minor bug fix regarding reading from stdin in some multiquery cmdline cases
  - add --resolve


author: Adrian Havill <havill@redhat.com> - 1.2.3-1
changelog:
  - mark xinetd conf file as a noreplace config file
  - more robust error checking for proper rfc1413 tokens


author: Adrian Havill <havill@redhat.com> - 1.2.4-1
changelog:
  - code vet and minor changes re alan@'s comments
  - default operating mode to alias all usernames as 'nobody'
    to prevent noobies from getting their mail addr harvested
  - clean up README documentation


author: Adrian Havill <havill@redhat.com> - 1.2.7-1
changelog:
  - added Provides to satisfy HP pkg rpm dep (#121447, #111640)
  - more code cleanup; minimize --resolve dns lookups


author: Adrian Havill <havill@redhat.com> - 1.3.0-1
changelog:
  - add unknown-error only -e option
  - edit readme, add rfc to docdir
  - code cleanup; remove static buffers, orthagonalize id names
  - ipv6 hybrid addr zero run correction
  - extra eight bits added to random key


author: Adrian Havill <havill@redhat.com> - 1.3.1-1
changelog:
  - increase default connections-per-sec/max-instances for HP
  - more doc cleanup
  - remove unnecessary rootdir check for -N/--ident


author: Adrian Havill <havill@redhat.com> - 1.3.4-1
changelog:
  - retry reading proc with pauses to reduce false negatives
  - match IPv4 addresses against IPv6 compatibility addresses


author: Adrian Havill <havill@redhat.com> - 1.4.0-1
changelog:
  - revise makefile; don't over-optimize as gcc can produce bad code
  - ptr cleanup when multiquery and missing /proc/net/tcp*
  - improve create_opt (error handling, debugging, identifiers)
  - add --prefix option for matching IPv4 to IPv6


author: Adrian Havill <havill@redhat.com> - 1.4.2-4
changelog:
  - slightly better error checking for insane cases
  - tweak of the openssl requires dependency loop (#131291)
  - as ident.key is created in %post, tweak so verify passes (#131530)
  - make the uid/gid for ident conform to the past (#135752)


author: Adrian Havill <havill@redhat.com> - 1.4.2-8
changelog:
  - tweak setting of uid/gid for key file so systems with no prior
    ident user/group don't generate a warning (#135837)


author: Roman Rakus <rrakus@redhat.com> - 1.4.3-24
changelog:
  - Fixed using valist with log option on.
    Resolves: #446844
  - user ident has home dir set to /
    Resolves: #458144


author: Ian Kent <ian.kent@pobox.com>
changelog:
  - Add patch to implement directory ghosting and direct mounts
  - Add patch to for autofs4 module to support ghosting


author: Ian Kent <raven@themaw.net>
changelog:
  - Cleaned up an restructured my added code
  - Corrected ghosting problem with 2.4.19 and above
  - Added autofs4 ghosting patch for 2.4.19 and above
  - Implemented HUP signal to force update of ghosted maps


author: Ian Kent <raven@themaw.net>
changelog:
  - Implemented LDAP direct map handling for nisMap and automountMap schema
  - Fixed autofs4 ghosting patch for 2.4.19 and above (again)
  - Added locking to fix overlapping internal calls to (u)mount 
  - Added wait for mtab~ to improve tolerance of overlapping external calls to (u)mount
  - Fixed ghosted directory removal after failed mount attempt


author: Ian Kent <raven@themaw.net>
changelog:
  - Fixed autofs4 ghosting patch for 2.4.19 and above (again)
  - Fixed autofs directory removal on failure of autofs mount
  - Fixed lock file wait function overlapping calls to (u)mount


author: Ian Kent <raven@themaw.net>
changelog:
  - Removed ineffective lock stuff
  - Added -n to bind mount to prevent mtab update error
  - Added retry to autofs umount to clean matb after fail
  - Redirected messages from above to debug log and added info message
  - Fixed autofs4 module reentrancy, pwd and chroot handling


author: Ian Kent <raven@themaw.net>
changelog:
  - Checked and merged most of the RedHat v3 patches
  - Fixed kernel module handling wu-ftpd login problem (again)


author: Jeff Moyer <jmoyer@redhat.com> 1:4.1.0-3
changelog:
  - Ported forward Red Hat's patches from 3.1.7 that were not already present
    in 4.1.0.
  - Moving autofs from version 3.1.7 to 4.1.0


author: Jeff Moyer <jmoyer@redhat.com> 1:4.1.0-4
changelog:
  - comment out /net and /misc from the default auto.master.  /net is important
    since in a default shipping install, we can neatly co-exist with amd.


author: Jeff Moyer <jmoyer@redhat.com> 1:4.1.0-5
changelog:
  - make the init script only recognize redhat systems.  Nalin seems to remember
    some arcane build system error that can be caused if we don't do this.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.0-7
changelog:
  - Moved the freeing of ap.path to cleanup_exit, as we would otherwise 
    reference an already-freed variable.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.1-3
changelog:
  - Fix bug in get_best_mount, whereby if there is only one option, we 
    choose nothing.  This is primarily due to the fact that we pass 0 in to
    the get_best_mount function for the long timeout parameter.  So, we
    timeout trying to contact our first and only server, and never retry.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.1-5
changelog:
  - Clarify documentation on direct maps.
  - Send automount daemons a HUP signal during reload.  This tells them to 
    re-read maps (otherwise they use a cached version.  Patch from the autofs
    maintainer.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.1-6
changelog:
  - Add the /etc/sysconfig/autofs file, and supporting infrastructure in 
    the init script.
  - Add support for UNDERSCORE_TO_DOT for those who want it.
  - We no longer own /net.  Move it to the filesystem package.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.2-1
changelog:
  - Change hard-coded paths in the spec file to the %{_xxx} variety.
  - Update to upstream 4.1.2.
  - Add a STRIPDASH option to /etc/sysconfig/autofs which allows for
    compatibility with the Sun automounter options specification syntax in
    auto.master.  See /etc/sysconfig/autofs for more information.  Addresses
    bug 113950.


author: <jmoyer@redhat.com> - 1:4.1.2-2
changelog:
  - Pass --libdir= to ./configure so we get this right on 64 bit platforms that 
    support backwards compat.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.2-5
changelog:
  - Ian has a new fix for replicated server and multi-mounts.  Updated the 
    patch for testing.  Still beta.  (Ian Kent)


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.2-6
changelog:
  - The lookup_yp module only dealt with YPERR_KEY, all other errors were 
    treated as success.  As a result, if the ypdomain was not bound, the 
    subprocess that starts mounts would SIGSEGV.  This is now fixed.
  - Option parsing in the init script was not precise enough, sometimes matching
    filesystem options to one of --ghost, --timeout, --verbose, or --debug.  
    The option-parsing patch addresses this issue by making the regexp's much
    more precise.
  - Ian has rolled a third version of the replicated mount fixes.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-2
changelog:
  - Incorporate patch from Ian which fixes an infinite loop seen by those
    running older versions of the kernel patches (triggered by non-strict mounts
    being the default).


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-4
changelog:
  - Perform an icmp ping request before rpc_pings, since the rpc clnt_create
    function has a builtin default timeout of 60 seconds.  This could result
    in a long delay when a server in a replicated mount setup is down.
  - For non-replicated server entries, ping a host before attempting to mount.
    (Ian Kent)
  - Change to %configure.
  - Put version-release into .version to allow for automount --version to
    print exact info.
  - Nuke my get-best-mount patch which always uses the long timeout.  This
    should no longer be needed.
  - Put name into changelog entries to make them consistent.  Add e:n-v-r
    into Florian's entry.
  - Stop autofs before uninstalling


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-8
changelog:
  - Change icmp ping to an rpc ping.  (Ian Kent)
  - Fix i18n patch
    o Remove the extra \" from one echo line.
    o Use echo -e if we are going to do a \n in the echo string.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-10
changelog:
  - Add bad chdir patch from Ian Kent.
  - Add a typo fix for the mtab lock file.
  - Nuke the stripdash patch.  It didn't solve a problem.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-11
changelog:
  - Add beta map expiry code for wider testing. (Ian Kent)
  - Fix check for ghosting option.  I forgot to check for it in DAEMONOPTIONS.
  - Remove STRIPDASH from /etc/sysconfig/autofs


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-12
changelog:
  - Add a sysconfig entry to disable direct map support, and set this to 
    1 by default.
  - Disable the beta map expiry logic so I can build into a stable distro.
  - Add defaults for all of the sysconfig variables to the init script so 
    we don't trip over user errors (i.e. deleting /etc/sysconfig/autofs).


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-13
changelog:
  - Only read one auto.master map (instead of concatenating all found sources).
  - Uncomment Ian's experimental mount expiry patch.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-14
changelog:
  - New map expiry patch from Ian.
  - Fix a couple signal races.  No known problem reports of these, but they
    are holes, none-the-less.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-15
changelog:
  - Fix a socket leak in the rpc_subs, causing mounts to fail since we are 
    running out of port space fairly quickly.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-17
changelog:
  - Add patch to support parsing nsswitch.conf to determine map sources.
  - Disable this patch, and Ian's map expiry patch for a FC build.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-18
changelog:
  - Umount loopback filesystems under automount points when stopping the 
    automounter.
  - Uncomment the map expiry patch.
  - change a close to an fclose in lookup_file.c


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-20
changelog:
  - Merged my and Ian's socket leak fixes into one, smaller patch. Only
    partially addresses bz #128966.
  - Fix some more echo lines for internationalization. bz #77820
  - Revert the only one auto.master patch until we implement the +auto_master
    syntax.  Temporarily addresses bz #133055.


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-27
changelog:
  - Fixed an error in the init script which caused duplicate entries to be
    displayed when asking for autofs status.


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-29
changelog:
  - Fixed a problem with backwards compatability. Specifying local
    maps without '/etc/' prepended to them now works. (bz #136038)


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-32
changelog:
  - Fixed the use of +ypmapname so the maps included with +ypmapname
    are used in the correct order.  (In the past the '+' entries
    were always processed after local entries.)


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-34
changelog:
  - Added a patch to fix the automounter failing on ldap maps
    when it couldn't get the whole map.  (ie. when the search
    limit was lower than the number of results)


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-55
changelog:
  - Fix program maps so that they can have gt 4k characters. (Neil Horman)
    Addresses bz #138994.
  - Add a space after the colon here "Starting automounter:" in init script.
    Fixes bz #138513.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-57
changelog:
  - Pass a socket into clntudp_bufcreate so that we don't use up additional 
    reserved ports.  This patch, along with the socket leak fix, addresses
    bz #128966.


author: <jmoyer@redhat.com> - 1:4.1.3-74
changelog:
  - Add in the map expiry patch
  - Bring in other patches that have been committed to other branches. This 
    version should now contain all fixes we have to date
  - Merge conflicts due to map expiry changes


author: Chris Feist <cfeist@redhat.com> - 1:4.3-80
changelog:
  - Added a variable to determine if we created the directory or not
    so we don't accidently remove a directory that we didn't create when
    we stop autofs.  (bz #134399)


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-90
changelog:
  - Fix potential double free in cache_release.  This bug showed up in a
    multi-map setup.  Two calls to cache_release would result in a SIGSEGV,
    and the automount process would never exit.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-98
changelog:
  - Program maps can repeat the last character of output.  Fix this.  
    Addresses bz #138606
  - Return first entry when there are duplicate keys in a map.  Addresses
    bz #140108.
  - Propagate custom map variables to submounts.  Fixes bz #143074.
  - Create a sysconfig variable to control whether we source only one master
    map (the way sun does), or source all maps found (which is the default for
    backwards compatibility).  Addresses bz #143126.
  - Revised version of the get_best_mount patch. (#146887) cfeist@redhat.com
    The previous patch introduced a regression.  Non-replicated mounts would
    not have the white space stripped from the entry and the mount would fail.
  - Handle comment characters in the middle of the automount line in
    /etc/nsswitch.conf.  Addresses bz #127457.


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-100
changelog:
  - When using ldap if auto.master doesn't exist we now check for auto_master.
    Addresses bz #130079
  - When using an auto.smb map we now remove the leading ':' from the path which
    caused mount to fail in the past.  Addresses bz #147492
  - Autofs now checks /etc/nsswitch.conf to determine in what order files & nis
    are checked when looking up autofs submount maps which don't specify a
    maptype.  Addresses IT #57612.


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-111
changelog:
  - Fixed one off bug in the submount-variable-propagation patch.
    (bz #143074)
  - Fixed a bug in the init script which wouldn't find the -browse
    option if it was preceded by another option. (fz #113494)


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-115
changelog:
  - Fixed regression causing any entries after a wildcard in an
    indirect map to be ignored. (bz #151668).
  - Fixed regression which caused local hosts to be mount instead
    of --bind local directories. (bz #146887)


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-119
changelog:
  - Merge in the multi-over patch.  This resolves an issue whereby multimounts
    (such as those used for /net) could be processed in the wrong order,
    resulting in directories not showing up in a multimount tree.  The fix
    is to process these directories in order, shortest to longer path.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-123
changelog:
  - Add in an error case that was omitted in the multi-over patch.
  - Update our auto.net to reflect the changes that went into 4.1.4_beta2.
    This fixes a problem seen by at least one customer where a malformed entry
    appeared first in the multimount list, thus causing the entire multimount
    to be ignored.  This new auto.net places that entry at the end, purely by
    luck, but it fixes the problem in this one case.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-4
changelog:
  - Finish up with the merge breakage.
  - Temporary fix for the multimount detection code.  It seems half-baked.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-6
changelog:
  - Fix a race between mounting a share and updating the cache in the parent
    process.  If the mount completed first, the parent would not expire the
    stale entry, leaving it first on the list.  This causes map updates to not
    be recognized (well, worse, they are recognized after the first expire, but
    not subsequent ones).  Fixes a regression, bug #137026 (rhel3 bug).


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-7
changelog:
  - I reversed the checking for multimount entries, breaking those configs!
    This update puts the code back the way it was before I broke it.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-8
changelog:
  - Add in the deferred syslog patch.  This fixes a hung automounter issue
    related to unsafe calls to syslog in signal handler context.


author: <jmoyer@redhat.com> - 1:4.1.4-10
changelog:
  - Fix some bugs in the parser
  - allow -net instead of /etc/auto.net
  - Fix a buffer overflow with large key lengths
  - Don't allow autofs to unlink files, only to remove directories
  - change to the upstream reentrant syslog patch from the band-aid deferred
    syslog patch.
  - Get rid of the init script patch that hard-coded the release to redhat.
    This should be handled properly by all red hat distros.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-12
changelog:
  - The sort command no longer accepts options of the form "+0".  This broke
    auto.net, so the option was removed.  Fixes bz #172111.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-14
changelog:
  - Removed the /misc entry from the default auto.master.  auto.misc has
    an entry for the cdrom device, and the preferred method of mounting the
    cd is via udev/hal.


author: Ian Kent <ikent@redhat.com> - 1:4.1.4-16
changelog:
  - Replace check-is-multi with more general multi-parse-fix.
  - Add fix for premature return when waiting for lock file.
  - Update copyright declaration for reentrant-syslog source.
  - Add patch for configure option to disable locking during mount.
    But don't disable locking by default.
  - Add ability to handle automount schema used in Sun directory server.
  - Quell compiler warning about getsockopt parameter.
  - Quell compiler warning about yp_order parameter.


author: Ian Kent <ikent@redhat.com> - 1:4.1.4-18
changelog:
  - Add patch to allow customization of arguments to the
    autofs-ldap-auto-master program (bz #187525).
  - Add patch to escap "#" characters in exports from auto.net
    program mount (bz#178304).


author: Ian Kent <ikent@redhat.com> - 1:4.1.4-20
changelog:
  - add patch to use "cifs" instead of smbfs and escape speces
    in share names (bz #163999, #187732).


author: Ian Kent <ikent@redhat.com> - 1:4.1.4-23
changelog:
  - add patch to ignore the "bg" and "fg" mount options as they
    aren't relevant for autofs mounts (bz #184386).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta3-1
changelog:
  - update source to version 5.0.0_beta3.
  - add patch to remove extra debug print.
  - add patch to
    - fix memory alloc error in nis lookup module.
    - add "_" to "." mapname translation to nis lookup module.
  - add patch to add owner pid to mount list struct.
  - add patch to disable NFSv4 when probing hosts (at least foe now).
  - add patch to fix white space handling in replicated server selection code.
  - add patch to prevent striping of debug info macro patch (Jeff Moyer).
  - add patch to add sanity checks on rmdir_path and unlink (Jeff Moyer).
  - add patch to fix e2fsck error code check (Jeff Moyer).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta3-3
changelog:
  - update hesiod module (Jeff Moyer).
    - add mutex to protect against overlapping mount requests.
    - update return from mount request to give more sensible NSS_*
      values.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta3-6
changelog:
  - add back test for nested mount in program map lookup.
    - I must have commented this out for a reason. I guess we'll
      find out soon enough.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-2
changelog:
  - re-instate v4 directory cleanup (bz# 193832 again).
  - backout master map lookup changes made to beta3.
  - change default master map from /etc/auto.master to auto.master
    so that we always use nsswitch to locate master map.
  - change default installed master map to include "+auto.master"
    to pickup NIS master map (all bz# 193831 again).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-4
changelog:
  - check base of offset mount tree is not a mount before umounting
    its offsets.
  - fix replicated mount parse for case where last name in list
    fails lookup.
  - correct indirect mount expire broken by the wildcard lookup fix.
  - fix up multi-mount handling when wildcard map entry present.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-6
changelog:
  - add free for working var in get_default_logging.
  - add inialisation for kver in autofs_point struct.
  - fix sources list corruption in check_update_map_sources.
  - fix memory leak in walk_tree.
  - fix memory leak in rpc_portmap_getport and rpc_ping_proto.
  - fix memory leak in initialisation of lookup modules.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-8
changelog:
  - fix handling of master map entry update (bz # 193718).
  - fix program map handling of invalid multi-mount offsets.


author: Jeff Moyer <jmoyer@redhat.com> - 5.0.0_beta4-12
changelog:
  - Change BuildPrereq to BuildRequires as per the package guidelines.
  - Add libxml2-devel to the BuildRequires, as it is needed for the LDAP
    authentication bits.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-13
changelog:
  - Change LDAP message severity from crit to degug (bz# 183893).
  - Corrections to INSTALL and README.v5.release.
  - Add patch to fix segv on overlength map keys in file maps (Jeff Moter).
  - Add patch to restrict scanning of /proc to pid directories only (Jeff Moyer).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta5-3
changelog:
  - lookup_init cleanup and fix missed memory leak.
  - use nis map order to check if update is needed.
  - fix couple of memory leaks in lookup_yp.c.
  - fix pasre error in replicated server module.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta5-4
changelog:
  - correct spelling error in default config.
  - fix default auth config not being installed.
  - change LDAP query method as my test db was incorrect.
  - change ldap defaults code to handle missing auth config.
  - fix mistake in parsing old style LDAP specs.
  - update LDAP so that new query method also works for old syntax.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta5-5
changelog:
  - allow global macro defines to override system macros.
  - correct spelling error in default config files missed by
    previous update.
  - misc correctness and a memory leak fix.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta6-1
changelog:
  - consolidate to beta6, including:
    - mode change update for config file.
    - correction to get_query_dn fix from beta5-4.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta6-2
changelog:
  - merge LDAP authentication update for GSSAPI (Jeff Moyer).
  - update default auth config to add options documenetation (Jeff Moyer).
  - workaround segfaults at exit after using GSSAPI library.
  - fix not checking return in init_ldap_connection (jeff Moyer).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta6-7
changelog:
  - correct directory cleanup in mount modules.
  - merge key and wildcard LDAP query for lookups (bz 197746).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.6
changelog:
  - cthon more parser corrections and attempt to fix multi-mounts
    with various combinations of submounts (still not right).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.14
changelog:
  - remove SIGCHLD handler because it is no longer needed and was
    causing expire problems.
  - alter expire locking of multi-mounts to lock sub-tree instead of
    entire tree.
  - review verbose message feedback and update.
  - correction for expire of multi-mounts.
  - spelling corrections to release notes (Jeff Moyer).
  - add back sloppy mount option, removed for Connectathon testing.
  - disable mtab locking again.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.15
changelog:
  - expire individual submounts.
  - add ino_index locking.
  - fix nested submount expiring away when pwd is base of submount.
  - more expire re-work to cope better with shutdown following cthon tests.
  - allow hostname to start with numeric when validating.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.16
changelog:
  - fix included map lookup.
  - fix directory cleanup on expire.
  - fix task cancelation at shutdown.
  - fix included map wild card key lookup.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.17
changelog:
  - fix task cancelation at shutdown (more)
  - fix concurrent mount and expire race with nested submounts.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.1
changelog:
  - consolidate to rc2.
  - fix colon escape handling.
  - fix recusively referenced bind automounts.
  - update kernel patches.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.5
changelog:
  - fix LDAP lookup delete cache entry only if entry doesn't exist.
  - add missing socket close in replicated host check (Jeff Moyer).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.7
changelog:
  - make default installed master map for /net use "-hosts" instead
    of auto.net.
  - fix included map recursive map key lookup.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.10
changelog:
  - fix get_query_dn not looking in subtree for LDAP search.
  - allow syntax "--timeout <secs>" for backward compatibility
    (bz 193948).
  - make masked_match independent of hostname for exports comparison
    (bz 209638).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.11
changelog:
  - fix file handle leak in nsswitch parser (bz 207678).
  - fix memory leak in mount and expire request processing (bz 207678).
  - add additional check to prevent running of cancelled tasks.
  - fix potential file handle leakage in rpc_subs.c for some failure
    cases (bz 207678).
  - fix file handle leak in included map lookup (bz 207678).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.12
changelog:
  - fix "-fstype=nfs4" server probing (part 2 of bz 208757).
  - set close-on-exec flag on open files where possible (bz 207678).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.16
changelog:
  - fix get_query_dn not looking in subtree for LDAP search (missed
    econd occurance).
  - allow additional common LDAP attributes in map dn.
  - Resolves: rhbz#205997


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.20
changelog:
  - Update patch for changed semantics of mkdir in recent kernels.
  - fix macro table locking (bz 208091).
  - fix nsswitch parser locking (bz 208091).
  - allow only one master map read task at a time.
  - fix misc memory leaks.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.21
changelog:
  - mitigate manual umount of automounts where possible.
  - fix multiply recursive bind mounts.
  - check kernel module version and require 5.00 or above.
  - fix expire regression introduced in the "mitigate manual umount" patch.
  - still more on multiply recursive bind mounts.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.23
changelog:
  - fix tokenizer to distinguish between global option and dn string (bz 214684).
  - fix incorrect return from spawn.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.26
changelog:
  - fix parsing of bad mount mount point in master map (bz 215620).
  - fix use after free memory access in cache.c and lookup_yp.c (bz 208091).
  - eliminate use of pthread_kill to detect task completion (bz 208091).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.29
changelog:
  - alter nfs4 host probing to not use portmap lookup and add options
    check for "port=" parameter (bz 208757).
  - correct semantics of "-null" map handling (bzs 214800, 208091).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.33
changelog:
  - expand export access checks to include missing syntax options.
  - make "-hosts" module try to be sensitive to exports list changes.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.34
changelog:
  - change mount "device" from "automount" to the map name.
  - check for buffer overflow in mount_afs.c.
  - replace tempnam with mkdtemp.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.38
changelog:
  - update master map tokenizer to admit "slasify-colons" option.
  - update location validation to accept "_" (bz 219445).
  - set close-on-exec flag on open sockets (bz 215757).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.41
changelog:
  - fix nonstrict multi-mount handling (bz 219383).
  - correct detection of duplicate indirect mount entries (bz 220799).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.5
changelog:
  - remove fullstop from Summary tag.
  - change Buildroot to recommended form.
  - replace Prereq with Requires.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.13
changelog:
  - make double quote handing consistent (at least as much as we can).
  - fix handling of trailing white space in wildcard lookup (forward port bz 199720).
  - check fqdn of each interface when matching export access list (bz 213700).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.17
changelog:
  - make use of spaces and tabs in spec file consistent.
  - escape embedded macro text in %changelog.
  - eliminate redundant %version and %release.
  - remove redundant conditional check from %clean.
  - remove redundant exit from %preun.
  - correct %defattr spec.
  - remove empty %doc and redundant %dir misc lines.
  - combine program module spec lines into simpler one line form.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.18
changelog:
  - update the "task done race" patch to fix a deadlock.
  - added URL tag.
  - removed obsoletes autofs-ldap.
  - replaced init directory paths with %{_initrddir} macro.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.24
changelog:
  - add "condrestart" to init script (bz 228860).
  - add "@network" and .domain.name export check.
  - fix display map name in mount entry for "-hosts" map.


author: Ian Kent <ikent@redhat.com> - 5.0.1-1
changelog:
  - update to release tar.
  - fix return check for getpwuid_r and getgrgid_r.
  - patch to give up trying to update exports list while host is mounted.
  - fix to "@network" matching. 
  - patch to check for fstab update and retry if not updated.


author: Ian Kent <ikent@redhat.com> - 5.0.1-5
changelog:
  - drop "DEFAULT_" prefix from configuration names.
  - add option to select replicated server at random (instead of
    ping response time) (bz 227604).
  - fix incorrect cast in directory cleanup routines (bz 231864).


author: Ian Kent <ikent@redhat.com> - 5.0.1-6
changelog:
  - fix directory creation for browse mounts.
  - fix wildcard map handling and improve nsswitch source map update.


author: Ian Kent <ikent@redhat.com> - 5.0.1-8
changelog:
  - add configuration variable to control appending of global options (bz 214684).
  - add command option to set a global mount options string (bz 214684).


author: Ian Kent <ikent@redhat.com> - 5.0.1-9
changelog:
  - upstream fix for filesystem is local check.
  - disable exports access control check (bz 203277).
  - fix patch to add command option for set a global mount options (bz 214684).


author: Ian Kent <ikent@redhat.com> - 5.0.1-16
changelog:
  - add ldaps support.
    - note: it's no longer possible to have multiple hosts in an ldap map spec.
    - note: to do this you need to rely on the ldap client config.


author: Ian Kent <ikent@redhat.com> - 5.0.2-2
changelog:
  - include krb5.h in lookup_ldap.h (some openssl doesn't implicitly include it).
  - correct initialization of local var in parse_server_string.


author: Ian Kent <ikent@redhat.com> - 5.0.2-5
changelog:
  - fix mount point directory creation for bind mounts.
  - add quoting for exports gathered by hosts map.


author: Ian Kent <ikent@redhat.com> - 5.0.2-10
changelog:
  - mark map instances stale so they aren't "cleaned" during updates.
  - fix large file compile time option.


author: Ian Kent <ikent@redhat.com> - 5.0.2-11
changelog:
  - don't fail on empty master map.
  - add support for the "%" hack for case insensitive attribute schemas.


author: Ian Kent <ikent@redhat.com> - 5.0.2-14
changelog:
  - update patch to prevent failure on empty master map.
  - if there's no "automount" entry in nsswitch.conf use "files" source.
  - add LDAP schema discovery if no schema is configured.


author: Ian Kent <ikent@redhat.com> - 5.0.2-16
changelog:
  - add descriptive comments to config about LDAP schema discovery.
  - work around segfault at exit caused by libxml2.
  - fix foreground logging (also fixes shutdown needing extra signal bug).


author: Ian Kent <ikent@redhat.com> - 5.0.2-18
changelog:
  - fix schema selection in LDAP schema discovery.
  - check for "*" when looking up wildcard in LDAP.
  - fix couple of edge case parse fails of timeout option.
  - add SEARCH_BASE configuration option.
  - add random selection as a master map entry option.
  - re-read config on HUP signal.
  - add LDAP_URI, LDAP_TIMEOUT and LDAP_NETWORK_TIMEOUT configuration options.
  - fix deadlock in submount mount module.
  - fix lack of ferror() checking when reading files.
  - fix typo in autofs(5) man page.
  - fix map entry expansion when undefined macro is present.
  - remove unused export validation code.
  - add dynamic logging (adapted from v4 patch from Jeff Moyer).
  - fix recursive loopback mounts (Matthias Koenig).
  - add map re-load to verbose logging.
  - fix handling of LDAP base dns with spaces.
  - handle MTAB_NOTUPDATED status return from mount.
  - when default master map, auto.master, is used also check for auto_master.
  - update negative mount timeout handling.
  - fix large group handling (Ryan Thomas).
  - fix for dynamic logging breaking non-sasl build (Guillaume Rousse).
  - eliminate NULL proc ping for singleton host or local mounts.


author: Ian Kent <ikent@redhat.com> - 5.0.2-21
changelog:
  - Bug 421371: CVE-2007-5964 autofs defaults don't restrict suid in /net [rawhide]
    - use mount option "nosuid" for "-hosts" map unless "suid" is explicily specified.


author: Ian Kent <ikent@redhat.com> - 5.0.2-23
changelog:
  - Bug 397591 SELinux is preventing /sbin/rpc.statd (rpcd_t) "search" to <Unknown> (sysctl_fs_t).
    - prevent fork between fd open and setting of FD_CLOEXEC.


author: Ian Kent <ikent@redhat.com> - 5.0.2-25
changelog:
  - Bug 426401: CVE-2007-6285 autofs default doesn't set nodev in /net [rawhide]
    - use mount option "nodev" for "-hosts" map unless "dev" is explicily specified.


author: Ian Kent <ikent@redhat.com> - 5.0.3-3
changelog:
  - catch "-xfn" map type and issue "no supported" message.
  - another correction for handling of LDAP base dns with spaces.


author: Ian Kent <ikent@redhat.com> - 5.0.3-4
changelog:
  - correction to the correction for handling of LDAP base dns with spaces.
  - avoid using UDP for probing NFSv4 mount requests.
  - use libldap instead of libldap_r.


author: Ian Kent <ikent@redhat.com> - 5.0.3-6
changelog:
  - fix expire calling kernel more often than needed.
  - fix unlink of mount tree incorrectly causing autofs mount fail.
  - add miscellaneous device node interface library.
  - use miscellaneous device node, if available, for active restart.
  - device node and active restart fixes.
  - update is_mounted to use device node ioctl, if available.


author: Ian Kent <ikent@redhat.com> - 5.0.3-8
changelog:
  - revert miscellaneous device node related patches.
  - add missing check for zero length NIS key.
  - fix incorrect match of map type name when included in map name.
  - update rev 7 sasl callbacks patch.


author: Ian Kent <ikent@redhat.com> - 5.0.3-18
changelog:
  - don't abuse the ap->ghost field on NFS mount.
  - multi-map doesn't pickup NIS updates automatically.
  - eliminate redundant DNS name lookups.
  - mount thread create condition handling fix.
  - allow directory create on NFS root.
  - check direct mount path length.
  - fix incorrect in check in get user info.
  - fix a couple of memory leaks.


author: Ian Kent <ikent@redhat.com> - 5.0.3-21
changelog:
  - add upstream bug fix patches
    - add command line option to override is running check.
    - don't use proc fs for is running check.
    - fix fail on included browse map not found.
    - fix incorrect multi source messages.
    - clear stale flag on map read.
    - fix proximity other rpc ping timeout.
    - refactor mount request vars code.
    - make handle_mounts startup condition distinct.
    - fix submount shutdown handling.
    - try not to block on expire.
    - add configuration paramter UMOUNT_WAIT.
    - fix multi mount race.
    - fix nfs4 colon escape handling.
    - check replicated list after probe.
    - add replicated server selection debug logging.
    - update replicated server selection documentation.
    - use /dev/urandom instead of /dev/random.
    - check for mtab pointing to /proc/mounts.
    - fix interface config buffer size.
    - fix percent hack heap corruption.


author: Ian Kent <ikent@redhat.com> - 5.0.3-23
changelog:
  - add upstream bug fixes
    - bug fix for mtab check.
    - bug fix for zero length nis key.
    - update for ifc buffer handling.
    - bug fix for kernel automount handling.
  - warning: I found a bunch of patches that were present but not
    being applied.


author: Ian Kent <ikent@redhat.com> - 5.0.3-25
changelog:
  - fix fd leak at multi-mount non-fatal mount fail.
  - fix incorrect multi-mount mountpoint calcualtion.


author: Ian Kent <ikent@redhat.com> - 5.0.3-26
changelog:
  - add map-type-in-map-name fix patch to sync with upstream and RHEL.
  - don't readmap on HUP for new mount.
  - add NIS_PARTIAL to map entry not found check and fix use after free bug.


author: Ian Kent <ikent@redhat.com> - 5.0.3-28
changelog:
  - don't close file handle for rootless direct mounti-mount at mount.
  - wait submount expire thread completion when expire successful.
  - add inadvertantly ommitted server list locking in LDAP module.


author: Ian Kent <kent@redhat.com> - 5.0.3-30
changelog:
  - fix segv during library re-open.
  - fix incorrect pthreads condition handling for expire requests.
  - fix master map lexer eval order.
  - fix bad alloca usage.


author: Ian Kent <kent@redhat.com> - 5.0.4-5
changelog:
  - fix negative caching of non-existent keys.
  - fix ldap library detection in configure.
  - use CLOEXEC flag functionality if present.
  - fix select(2) fd limit.
  - make hash table scale to thousands of entries.


author: Ian Kent <ikent@redhat.com> - 5.0.4-8
changelog:
  - rename program map parsing bug fix patch.
  - use CLOEXEC flag functionality for setmntent also, if present.


author: Ian Kent <ikent@redhat.com> - 5.0.4-9
changelog:
  - fix hosts map use after free.
  - fix uri list locking (again).
  - check for stale SASL credentials upon connect fail.
  - add "forcestart" and "forcerestart" init script options to allow
    use of 5.0.3 strartup behavior if required.
  - always read entire file map into cache to speed lookups.
  - make MAX_ERR_BUF and PARSE_MAX_BUF use easier to audit.
  - make some easy alloca replacements.
  - update to configure libtirpc if present.
  - update to provide ipv6 name and address support.
  - update to provide ipv6 address parsing.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-15
changelog:
  - fix array out of bounds accesses and cleanup couple of other alloca() calls.
  - Undo mistake in copy order for submount path introduced by rev 11 patch.
  - add check for alternate libxml2 library for libxml2 tsd workaround.
  - add check for alternate libtirpc library for libtirpc tsd workaround.
  - cleanup configure defines for libtirpc.
  - add WITH_LIBTIRPC to -V status report.
  - add libtirpc-devel to BuildRequires.
  - add nfs mount protocol default configuration option.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-21
changelog:
  - fix file map lookup when reading included or nsswitch sources.
    - a regression introduced by file map lookup optimisation in rev 9.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-26
changelog:
  - fix lsb init script header.
  - fix memory leak reading ldap master map.
  - fix st_remove_tasks() locking.
  - reset flex scanner when setting buffer.
  - zero s_magic is valid.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-28
changelog:
  - use intr option as hosts mount default.
  - sync kernel includes with upstream kernel.
  - dont umount existing direct mount on master re-read.
  - fix incorrect shutdown introduced by library relaod fixes.
  - improve manual umount recovery.
  - dont fail on ipv6 address when adding host.
  - always read file maps multi map fix.
  - always read file maps key lookup fixes.
  - add support for LDAP_URI="ldap:///<domain db>" SRV RR lookup.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-30
changelog:
  - fix incorrect dclist free.
  - srv lookup handle endianness.
  - fix bug introduced by library reload changes which causes autofs to
    not release mount thread resources when using submounts.
  - fix notify mount message path.
  - try harder to work out if we created mount point at remount.
  - fix double free in do_sasl_bind().
  - manual umount recovery fixes.
  - fix map type info parse error.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-32
changelog:
  - fix an RPC fd leak.
  - don't block signals we expect to dump core.
  - fix pthread push order in expire_proc_direct().


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-39
changelog:
  - fix libxml2 non-thread-safe calls.
  - fix direct map cache locking.
  - fix patch "dont umount existing direct mount on reread" deadlock.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-1
changelog:
  - update source to latest upstream version.
    - this is essentially a consolidation of the patches already in this rpm.
  - add dist tag to match latest RHEL-5 package tag format.


author: Ian Kent <kent@redhat.com> - 1:5.0.5-2
changelog:
  - fix included map read fail handling.
  - refactor ldap sasl authentication bind to eliminate extra connect
    causing some servers to reject the request. 
  - add mount wait parameter to allow timeout of mount requests to
    unresponsive servers.
  - special case cifs escape handling.
  - fix libxml2 workaround configure.
  - more code analysis corrections (and fix a typo in an init script).
  - fix backwards #ifndef INET6.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-6
changelog:
  - don't use master_lex_destroy() to clear parse buffer.
  - make documentation for set-log-priority clearer.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-17
changelog:
  - dont connect at ldap lookup module init.
  - fix random selection option.
  - fix disable timeout.
  - fix strdup() return value check.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-22
changelog:
  - fix get query dn failure.
  - fix ampersand escape in auto.smb.
  - add locality as valid ldap master map attribute.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-25.fc14
changelog:
  - make nfs4 default for replicated selection configuration (bz579949).
  - add simple bind authentication option (bz579951).


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-27.fc14
changelog:
  - fix master map source server unavailable handling.
  - add autofs_ldap_auth.conf man page.
  - fix random selection for host on different network.
  - make redhat init script more lsb compliant.
  - don't hold lock for simple mounts.
  - fix remount locking.
  - fix wildcard map entry match.
  - fix parse_sun() module init.
  - dont check null cache on expire.
  - fix null cache race.
  - fix cache_init() on source re-read.
  - fix mapent becomes negative during lookup.
  - check each dc server individually.
  - fix negative cache included map lookup.
  - remove state machine timed wait.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-28
changelog:
  - remove extra read master map call.
  - remove extra cache create call in master_add_map_source().
  - fix error handing in do_mount_indirect().
  - expire thread use pending mutex.
  - explicity link against the Kerberos library.
  - remove some log message duplication for verbose logging.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-32.fc15
changelog:
  - always read file maps mount lookup map read fix.
  - fix direct map not updating on reread.
  - add external bind method.
  - fix add simple bind auth.
  - add option to dump configured automount maps.
  - wait for master map to be available at start.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-36
changelog:
  - use weight only for server selection.
  - fix isspace() wild card substition.
  - auto adjust ldap page size.
  - fix prune cache valid check.
  - fix mountd vers retry.
  - fix expire race.
  - add lsb force-reload and try-restart.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-3
changelog:
  - improve mount location error reporting.
  - fix paged query more results check.
  - fix dumpmaps not reading maps.
  - fix result null check in read_one_map().
  - Fix LDAP result leaks on error paths.
  - code analysis fixes 1.
  - fix not bind mounting local filesystem.
  - update dir map-type patch for changed patch order.
  - fix wait for master source mutex.
  - fix submount shutdown race
  - fix fix map source check in file lookup.
  - add disable move mount configure option.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-5
changelog:
  - fix ipv6 name lookup check.
  - fix ipv6 rpc calls.
  - fix ipv6 configure check.
  - add piddir to configure.
  - add systemd unit support.
  - fix MNT_DETACH define.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-9
changelog:
  - add correct patch for "fix improve mount location error reporting".
  - add correct patch for "fix fix wait for master source mutex".


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-12
changelog:
  - ignore duplicate exports in auto.net.
  - add kernel verion check function.
  - add function to check mount.nfs version.
  - reinstate singleton mount probe.
  - rework error return handling in rpc code.
  - catch EHOSTUNREACH and bail out early.
  - systemd support fixes.
  - fix segmentation fault in do_remount_indirect().


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-15
changelog:
  - fix typo in libtirpc file name.
  - fix rework error return handling in rpc code.
  - allow MOUNT_WAIT to override probe.
  - improve UDP RPC timeout handling.
  - fix segfault in get_query_dn().
  - use strtok_r() in linux_version_code().
  - fix sss wildcard match.
  - fix dlopen() error handling in sss module.
  - fix configure string length tests for sss library.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-21
changelog:
  - fix fix LDAP result leaks on error paths.
  - report map not read when debug logging.
  - duplicate parent options for included maps.
  - update ->timeout() function to not return timeout.
  - move timeout to map_source.
  - fix kernel verion check of version components.
  - dont retry ldap connect if not required.
  - check if /etc/mtab is a link to /proc/self/mounts.
  - fix nfs4 contacts portmap.
  - make autofs wait longer for shutdown.
  - fix sss map age not updated.
  - fix remount deadlock.
  - fix umount recovery of busy direct mount.
  - fix offset mount point directory removal.
  - remove move mount code and configure option.
  - fix remount of multi mount.
  - fix devce ioctl alloc path check.
  - refactor hosts lookup module.
  - remove cache update from parse_mount().
  - add function to delete offset cache entry.
  - allow update of multi mount offset entries.
  - add hup signal handling to hosts map.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-21
changelog:
  - fix systemd argument passing.
  - fix get_nfs_info() can incorrectly fail.
  - fix offset directory removal.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-3
changelog:
  - fix nobind sun escaped map entries.
  - fix use cache entry after free mistake.
  - fix ipv6 proximity calculation.
  - fix parse buffer initialization.
  - fix typo in automount(8).


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-4
changelog:
  - include usage in usage message.
  - dont wait forever to restart.
  - add option description to man page.
  - fix null map entry order handling.
  - make description of default MOUNT_WAIT setting clear.
  - configure.in: allow cross compilation.
  - README: update mailing list subscription info.
  - allow non root user to check status.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-6
changelog:
  - fix recursive mount deadlock.
  - increase file map read buffer size.
  - handle new location of systemd.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-8
changelog:
  - fix map entry duplicate offset detection.
  - Allow nsswitch.conf to not contain "automount:" lines.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-10
changelog:
  - fix submount offset delete.
  - fix init script status return.
  - fix use get_proximity() without libtirpc.
  - don't use dirent d_type to filter out files in scandir().
  - don't schedule new alarms after readmap.
  - use numeric protocol ids instead of protoent structs.
  - lib/defaults.c: use WITH_LDAP conditional around LDAP types.
  - make yellow pages support optional.
  - modules/replicated.c: use sin6_addr.s6_addr32.
  - workaround missing GNU versionsort extension.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-12
changelog:
  - dont fail on master map self include.
  - fix wildcard multi map regression.
  - fix file descriptor leak when reloading the daemon.
  - depricate nosymlink pseudo option.
  - add symlink pseudo option.
  - update kernel include files.
  - fix requires in spec file.
  - fix libtirpc build option.
  - fix systemd unidir in spec file.
  - document browse option in man page.
  - fix automounter support on parisc.


author: Ian Kent <kent@redhat.com> - 1:5.0.7-14
changelog:
  - fix some automount(8) typos (bz664178).
  - fix syncronize of handle_mounts() shutdown.
  - fix submount tree not all expiring.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-16
changelog:
  - make dump maps check for duplicate indirect mounts (bz961312).
  - document allowed map sources in auto.master(5) (bz961312).
  - add enable sloppy mount option to configure.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-20
changelog:
  - fix master map mount options matching.
  - fix master map bogus keywork match.
  - fix fix map entry duplicate offset detection.
  - add a number of fixes based on a Covarity report.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-28
changelog:
  - bz983160 Package autofs-5.0.7-22.el7 failed RHEL7 RPMdiff testing
    - fix add null check in parse_server_string() (bz979155).
    - check for protocol option.
    - use ulimit max open files if greater than internal maximum.
    - fix default path used for unitdir.
    - fix changelog inconsistent dates.
    - fix default path used for unitdir.
    - fix changelog inconsistent dates.
    - link with full reloc options.
    - fix a couple of compiler warnings.
    - add after sssd dependency to unit file (bz984089).
  - Resolves: rhbz#983160
  +


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-29
changelog:
  - bz994352 - "autofs reload" causes automount to stop running when multiple
    maps are removed from auto.master
    - fix syncronize handle_mounts() shutdown.
  - bz994359 - Wildcard in nested mounts regression
    - fix fix wildcard multi map regression.
  - Resolves: rhbz#994352 rhbz#994359


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-30
changelog:
  - bz852327 - RFE: feature to dump automount maps in native file format
    - fix dumpmaps multi output.
    - try and cleanup after dumpmaps.
    - teach dumpmaps to output simple key value pairs.
  - Resolves: rhbz#852327


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-31
changelog:
  - bz1011909 - NFSv4 UDP packet sent during automounting
    - fix get_nfs_info() probe.
    - fix portmap lookup.
  - bz995979 - RFE: feature to dump automount maps in native file format
    - update dumpmaps patch with latest changes from QE testing.
  - Resolves: rhbz#1011909 rhbz#995979


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-32
changelog:
  - bz1011909 - NFSv4 UDP packet sent during automounting
    - only probe specific nfs version if requested.
  - Related: rhbz#1011909


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-33
changelog:
  - bz1029611 - Fresh rhel7 install can't automount nfs exports
    - regenerate configure due to missing function.
  - Resolves: rhbz#1029611


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-34
changelog:
  - bz1029611 - Fresh rhel7 install can't automount nfs exports
    - fix revision in spec file.
  - Resolves: rhbz#1029611


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-35
changelog:
  - bz1029611 - Fresh rhel7 install can't automount nfs exports
    - fix ipv6 libtirpc getport function.
  - Related: rhbz#1029611


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-35
changelog:
  - bz1030705 - Default unmount is in 10 seconds, man page says 10 minutes
    - improve timeout option description.
  - Related: rhbz#1030705


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-37
changelog:
  - bz1035977 - with IPv6 address automount fail with "hostname lookup failed"
    - fix ipv6 link local address handling.
  - Resolves: rhbz#1035977


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-40
changelog:
  - bz1063139 - autofs regression test failure.
    - fix fix ipv6 libtirpc getport.
    - get_nfs_info() should query portmapper if port is not given.
    - fix rpc_portmap_getport() proto not set.
    - fix portmap not trying proto v2.
  - Resolves: rhbz#1063139


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-41
changelog:
  - bz1094661 - autofs can ghost non-existent map entries given the right timing
    - fix negative status being reset on map read.
    - fix fix negative status being reset on map read.
    - check for non existent negative entries in lookup_ghost().
  - bz1124389 - autofs-5.0.5-88.el6 breaks maps that have a -v in the options
    - allow use of hosts map in maps (dependent patch).
    - fix options compare.
    - fix fix options compare.
  - Resolves: rhbz#1094661 rhbz#1124389


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-42
changelog:
  - bz1116184 - RFE: RHEL7: Add am-utils RPM or equivalent am-utils functionality
    to other packages
    - add amd map format parser.
  - bz1132236 - Memory leak in get_exports
    - fix memory leak in create_client().
    - fix memory leak in get_exports().
  - bz1135158 - double free or corruption (fasttop) causes abort in ldap_int_tls_destroy
    - fix deadlock in init_ldap_connection().
    - extend libldap serialization.
  - Resolves: rhbz#1116184 rhbz#1132236 rhbz#1135158


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-43
changelog:
  - bz1066772 - Clarify autofs(5) man page sections "Multiple Mounts" and
    "Replicated Server"
    - clarify multiple mounts description.
  - Resolves: rhbz#1066772


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-44
changelog:
  - bz1099800 - man page of /etc/init.d/autofs: /usr/share/man/man8/autofs.8.gz
    is not needed in RHEL-7
    - update man page autofs(8) for systemd
  - Resolves: rhbz#1099800


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-45
changelog:
  - bz1152862 - autofs shouldn't have kernel as a dependency
    - remove an ancient kernel Requires.
  - Resolves: rhbz#1152862


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-46
changelog:
  - bz1153414 - autofs-5.0.5-109 with upgrade to RHEL 6.6 no longer recognizes
    +yp: in auto.master
    - fix fix master map type check.
  - Resolves: rhbz#1153414


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-47
changelog:
  - bz1156662 - autofs /net maps do not refresh list of shares exported on
    the NFS server
    - fix typo in update_hosts_mounts().
    - fix hosts map update on reload.
  - Resolves: rhbz#1156662


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-48
changelog:
  - bz1164957 - The default installed autofs.conf doesn't have default nfs
    protocol set to 4
    - add missing line to copy RedHat customized config to spec file.
  - Resolves: rhbz#1164957


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-49
changelog:
  - bz1166457 - Autofs unable to mount indirect after attempt to mount wildcard
    - make negative cache update consistent for all lookup modules.
    - ensure negative cache isn't updated on remount.
    - dont add wildcard to negative cache.
  - bz1162041 - priv escalation via interpreter load path for program based
    automount maps
    - add a prefix to program map stdvars.
    - add config option to force use of program map stdvars.
  - bz1161474 - automount segment fault in parse_sun.so for negative parser tests
    - fix incorrect check in parse_mount().
  - bz1205600 - Autofs stopped mounting /net/hostname/mounts after seeing duplicate
    exports in the NFS server
    - handle duplicates in multi mounts.
  - bz1201582 - autofs: MAPFMT_DEFAULT is not macro in lookup_program.c
    - fix macro usage in lookup_program.c.
  - Resolves: rhbz#1166457 rhbz#1162041 rhbz#1161474 rhbz#1205600 rhbz#1201582


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-50
changelog:
  - bz1218045 - Similar but unrelated NFS exports block proper mounting of
    "parent" mount point
    - remove unused offset handling code.
    - fix mount as you go offset selection.
  - Resolves: rhbz#1218045


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-51
changelog:
  - bz1233065 - 'service autofs reload' does not reloads new mounts only
    when 'sss' or 'ldap' is used in '/etc/nsswitch.conf' file
    - init qdn before use in get_query_dn().
    - fix left mount count return from umount_multi_triggers().
    - fix return handling in sss lookup module.
    - move query dn calculation from do_bind() to do_connect().
    - make do_connect() return a status.
    - make connect_to_server() return a status.
    - make find_dc_server() return a status.
    - make find_server() return a status.
    - fix return handling of do_reconnect() in ldap module.
  - bz1233067 - autofs is performing excessive direct mount map re-reads
    - fix direct mount stale instance flag reset.
  - bz1233069 - Direct map does not expire if map is initially empty
    - fix direct map expire not set for initial empty map.
  - Resolves: rhbz#1233065 rhbz#1233067 rhbz#1233069


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-52
changelog:
  - bz1233069 - Direct map does not expire if map is initially empty
    - update patch to fix expiry problem.
  - Related: rhbz#1233069


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-53
changelog:
  - bz1238573 - RFE: autofs MAP_HASH_TABLE_SIZE description
    - update map_hash_table_size description.
  - Resolves: rhbz#1238573


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-54
changelog:
  - bz1263508 - Heavy program map usage can lead to a hang
    - fix out of order call in program map lookup.
  - Resolves: rhbz#1263508


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-55
changelog:
  - bz1298115 - The autofs service fails to load maps on boot if the maps
    are stored on a NFS mount
    - make service want network-online.
    - add remote-fs.target systemd dependency.
  - bz1300496 - Duplicate mounts created or leftovers in mtab
    - revert special case cifs escapes.
  - bz1300498 - Parent directory in nested mount gets unmounted while the
    child remains mounted
    - guard against incorrect umount return.
  - bz1305721 - autofs.conf: Fix 'nameing' typo
    - fix 'nameing' typo in autofs.conf.
  - bz1329869 - RHEL6.7: shutdown / reboot hangs with findmnt in a readlink
    system call, doing path_walk and stuck in autofs4_wait
    - always set direct mounts catatonic at exit.
    - log pipe read errors.
    - fix rwlock unlock crash.
    - fix handle_mounts() termination condition check.
  - bz1300500 - double free or corruption (fasttop) causes abort in
    ldap_int_tls_destroy
    - fix config old name lookup.
    - fix error handling on ldap bind fail.
    - fix gcc5 complaints.
    - fix fix gcc5 complaints.
    - fix missing source sss in multi map lookup.
    - fix update_hosts_mounts() return.
    - change lookup to use reinit instead of reopen.
    - fix unbind sasl external mech.
    - fix sasl connection concurrancy problem.
    - add some Coverity fixes identified for recent changes.
  - bz1300501 - Request to add a configuration option to force use of the map
    entry hostname for mounts
    - add configuration option to use fqdn in mounts
  - Resolves: rhbz#1298115 rhbz#1300496 rhbz#1300498 rhbz#1305721
  - Resolves: rhbz#1329869 rhbz#1300500 rhbz#1300501


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-56
changelog:
  - bz1327388 - Fix use-after-free in st_queue_handler
    - fix use-after-free in st_queue_handler().
  - bz1252071 - [RFE] Disable alerting on non-existent automounts
    - add config option to suppress not found log message.
  - Resolves: rhbz#1327388 rhbz#1252071


author: Ian Kent <ikent@redhat.com> - 5.0.7-57
changelog:
  - bz1383194 - On every system boot automount needs a restart to access
    NIS map
    - wait for master map available at start.
    - add master read wait option.
    - fix included master map not found return.
    - dont exit on master map read fail timeout.
    - set sane default master read wait timeout.
    - don't return until after master map retry read.
    - make lookup_nss_read_master() return nss status.
  - Resolves: rhbz#1383194


author: Ian Kent <ikent@redhat.com> - 5.0.7-58
changelog:
  - bz1420584 - RHEL7.3: shutdown / reboot hangs with findmnt in a readlink
    system call, doing path_walk and stuck in autofs4_wait
    - make set_direct_mount_catatonic() more general.
    - set autofs mounts catatonic at exit.
  - bz1396403 - Trying to access a non-existent directory using automount
    results in 4 minute hang as not checking the local mount availability
    - check NFS server availability on local mount fallback.
  - bz1399796 - local nfs share being bind-mounted by autofs is mounted
    read-only even when marked rw in its map
    - honor last rw in mount options when doing a bind mount.
  - Resolves: rhbz#1420584 rhbz#1396403 rhbz#1399796


author: Ian Kent <ikent@redhat.com> - 5.0.7-59
changelog:
  - bz1383910 - Incorrect autofs.schema
    - update and add README for old autofs schema
  - bz1367576 - [RFE] Add browsing support into autofs for AMD format maps
    - fix short memory allocation in lookup_amd_instance().
    - fix count_mounts() function.
    - fix argc off by one in mount_autofs.c.
    - fix _strncmp() usage.
    - fix typos in README.amd-maps.
    - add ref counting to struct map_source.
    - add support for amd browsable option.
    - add function conf_amd_get_map_name().
    - add function conf_amd_get_mount_paths().
    - include amd mount section mounts in master mounts list.
    - check for conflicting amd section mounts.
    - add function conf_amd_get_map_options().
    - capture cache option and its settings during parsing.
    - handle map_option cache for top level mounts.
    - handle amd cache option all in amd type auto mounts.
    - fix bogus check in expire_cleanup().
    - delay submount exit for amd submounts.
  - Resolves: rhbz#1383910 rhbz#1367576


author: Ian Kent <ikent@redhat.com> - 5.0.7-60
changelog:
  - bz1382093 - Improve logging in autofs
     - add the mount requestor's pid to pending_args.
     - create thread-local ID for mount attempts.
     - log functions to prefix messages with attempt_id if available.
     - factor out set_thread_mount_request_log_id().
     - add config option to use mount request log id.
  - Resolves: rhbz#1382093


author: Ian Kent <ikent@redhat.com> - 5.0.7-61
changelog:
  - bz1101782 - autofs configured with sssd is not finding any maps
    - work around sss startup delay.
    - add sss master map wait config option (wait initially 0, disabled).
  - Resolves: rhbz#1101782


author: Ian Kent <ikent@redhat.com> - 5.0.7-62
changelog:
  - bz1367576 - [RFE] Add browsing support into autofs for AMD format maps
    - use autofs_point to store expire timeout where possibe.
  - Related: rhbz#1367576


author: Ian Kent <ikent@redhat.com> - 5.0.7-63
changelog:
  - bz1101782 - autofs configured with sssd is not finding any maps
    - fix work around sss startup delay.
  - bz1367576 - [RFE] Add browsing support into autofs for AMD format maps
    - fix possible NULL derefernce.
  - Related: rhbz#1101782 rhbz#1367576


author: Ian Kent <ikent@redhat.com> - 5.0.7-64
changelog:
  - bz1440769 - autofs is facing scalability issues
    - improve scalability of direct mount path component creation.
  - Resolves: rhbz#1440769


author: Ian Kent <ikent@redhat.com> - 5.0.7-65
changelog:
  - bz1367576 - [RFE] Add browsing support into autofs for AMD format maps
    - fix invalid reference in remount_active_mount().
  - Related: rhbz#1367576


author: Ian Kent <ikent@redhat.com> - 5.0.7-66
changelog:
  - bz1435736 - autofs fails with kernel: automount[3386]:
      segfault at 7f3fb7595ca8 ip 00007f3fb61e353a sp 00007f3fb7595cb0
      error 6 in libc-2.17.so[7f3fb60b7000+1b6000]
    - increase worker thread per-thread stack size.
    - limit getgrgid_r() buffer size.
    - add congigure option for limiting getgrgid_r() stack usage.
    - use above option to limit getgrgid_r() stack usage with configure.
  - Resolves: rhbz#1435736


author: Ian Kent <ikent@redhat.com> - 5.0.7-68
changelog:
  - bz1435736 - autofs fails with kernel: automount[3386]:
      segfault at 7f3fb7595ca8 ip 00007f3fb61e353a sp 00007f3fb7595cb0
      error 6 in libc-2.17.so[7f3fb60b7000+1b6000]
    - fix unset tsd group name handling.
  - Related: rhbz#1435736


author: Ian Kent <ikent@redhat.com> - 5.0.7-69
changelog:
  - bz1435736 - autofs fails with kernel: automount[3386]:
      segfault at 7f3fb7595ca8 ip 00007f3fb61e353a sp 00007f3fb7595cb0
      error 6 in libc-2.17.so[7f3fb60b7000+1b6000]
    - fix a couple of covarity warning resulting in group name handling change.
  - Related: rhbz#1435736


author: Ian Kent <ikent@redhat.com> - 5.0.7-70
changelog:
  - bz1442926 - Systemd kills autofs fuse mount on service restart
    - set systemd KillMode to process.
  - bz1466256 - autofs: unable to mount nfs share after reboot
    - fix mount.nfs blocks on first mount.
  - bz1476850 - Man page: Make auto.master 's summary findable via 'man -k autofs'
    - fix typos in autofs man pages.
    - fix some man page problems.
  - bz1486035 - autofs map entry options field does not accept dot character
    - allow dot in OPTIONSTR value lexer pattern.
  -Resolves: rhbz#1442926 rhbz#1466256 rhbz#1476850 rhbz#1486035


author: Ian Kent <ikent@redhat.com> - 5.0.7-71
changelog:
  - bz1497846 - Macro definitions specified in mount entries are no longer getting set
    - revert fix argc off by one in mount_autofs.c.
  - Resolves: rhbz#1497846


author: Ian Kent <ikent@redhat.com> - 5.0.7-72
changelog:
  - bz1499287 - Autofs processes hung while waiting for the release of an entry
    master_lock that is held by another thread waiting on a bind mount
    - only take master map mutex for master map update.
  - Resolves: rhbz#1499287


author: Ian Kent <ikent@redhat.com> - 5.0.7-73
changelog:
  - bz1489648 - autofs missing dependency with libsss_autofs cause missing file
    messages during boot
    - fix nisplus lookup init not configured check.
    - make open_lookup() error handling more consistent.
    - be silent about sss library not found.
    - be silent about nis domain not set.
    - make map source reference message debug only.
  - Resolves: rhbz#1489648


author: Ian Kent <ikent@redhat.com> - 5.0.7-74
changelog:
  - bz1486035 - autofs map entry options field does not accept dot character
    - handle additional nfs versions in mount_nfs.c.
  - Related: rhbz#1486035


author: Ian Kent <ikent@redhat.com> - 5.0.7-75
changelog:
  - bz1489247 - autofs: config mount_nfs_default_protocol doesn't work
    - improve description of mount_nfs_default_protocol.
  - Resolves: rhbz#1489247


author: Ian Kent <ikent@redhat.com> - 5.0.7-76
changelog:
  - bz1504145 - Automount cannot access host shares after a reboot
    - reset master map list on startup retry.
  - Resolves: rhbz#1504145


author: Ian Kent <ikent@redhat.com> - 5.0.7-77
changelog:
  - bz1504145 - Automount cannot access host shares after a reboot
    - fix reject in patch changelog hunk.
  - Related: rhbz#1504145


author: Ian Kent <ikent@redhat.com> - 5.0.7-78
changelog:
  - bz1509043 - [RFE] "automount / amd: file system type program is not
    yet implemented"
    - improve debug logging of lookup key.
    - fix cachefs parse message not being logged.
    - fix typo in amd_parse.c.
    - add missing MODPREFIX to logging in amd parser.
    - fix symlink false negative in umount_multi().
    - remove expand_selectors() call on amd parser entry.
    - fix amd defaults map entry handling.
    - refactor amd_parse.c.
    - fix amd parser double quote handling.
    - fix expandamdent() quote handling.
    - fix possible memory leak during amd parse.
    - remove path restriction of amd external mount.
    - add function umount_amd_ext_mount().
    - add function ext_mount_inuse().
    - add function construct_argv().
    - add amd mount type program mount support.
  - Resolves: rhbz#1509043


author: Ian Kent <ikent@redhat.com> - 5.0.7-79
changelog:
  - bz1509043 - [RFE] "automount / amd: file system type program is not
    yet implemented"
    - fix memory leak in umount_amd_ext_mount().
    - fix strerror_r() parameter declaration in do program_mount().
    - fix incorrect check in validate_program_options().
  - Related: rhbz#1509043


author: Ian Kent <ikent@redhat.com> - 5.0.7-80
changelog:
  - bz1509088 - autofs hangs due to race condition in do_spawn
    - update configure to check for pipe2(2).
    - fix open calls not using open_xxxx() calls.
    - move open_xxxx() functions to spawn.c.
    - serialize calls to open_xxxx() functions.
  - Resolves: rhbz#1509088


author: Ian Kent <ikent@redhat.com> - 5.0.7-81
changelog:
  - bz1527815 - automount[1979]: segfault at 55f5101d30e8 ip 000055f50f177668
                sp 00007ffffa85fdd0 error 4 in automount[55f50f16d000+48000]
    - fix use after free in do_master_list_reset()
  - Resolves: rhbz#1527815


author: Ian Kent <ikent@redhat.com> - 5.0.7-82
changelog:
  - bz1527815 - automount[1979]: segfault at 55f5101d30e8 ip 000055f50f177668
                sp 00007ffffa85fdd0 error 4 in automount[55f50f16d000+48000]
    - fix deadlock in dumpmaps.
  - Related: rhbz#1527815


author: Ian Kent <ikent@redhat.com> - 5.0.7-83
changelog:
  - bz1509043 - [RFE] "automount / amd: file system type program is not
    yet implemented"
    - dont use array for path when not necessary.
    - fix prefix option handling in expand_entry().
    - fix sublink handling in do_nfs_mount().
    - add fix error return in do_nfs_mount().
  - Related: rhbz#1509043


author: Ian Kent <ikent@redhat.com> - 5.0.7-84
changelog:
  - bz1548922 - automount crashes due to segfault
    - fix create_client() RPC client handling.
  -Resolves: rhbz#1548922


author: Ian Kent <ikent@redhat.com> - 5.0.7-85
changelog:
  - bz1536526 - Ignore trailing slashes at the end of executable maps
    in auto.master config file
    - dont allow trailing slash in master map mount points.
  -Resolves: rhbz#1536526


author: Ian Kent <ikent@redhat.com> - 5.0.7-86
changelog:
  - bz1548922 - automount crashes due to segfault
    - fix fd leak in rpc_do_create_client().
  -Related: rhbz#1548922


author: Ian Kent <ikent@redhat.com> - 5.0.7-87
changelog:
  - bz1548922 - automount crashes due to segfault
    - fix package revision and changelog.
  -Related: rhbz#1548922


author: Ian Kent <ikent@redhat.com> - 5.0.7-88
changelog:
  - bz1548922 - automount crashes due to segfault
    - fix changelog date on previous two entries.
  -Related: rhbz#1548922


author: Ian Kent <ikent@redhat.com> - 5.0.7-89
changelog:
  - bz1548922 - automount crashes due to segfault
    - and fix incorrect month in changelog entries.
  -Related: rhbz#1548922


author: Ian Kent <ikent@redhat.com> - 5.0.7-90
changelog:
  - bz1536526 - Ignore trailing slashes at the end of executable maps
    in auto.master config file
    - add man page note about extra slashes in paths.
  -Related: rhbz#1536526


author: Ian Kent <ikent@redhat.com> - 5.0.7-92
changelog:
  - bz1581502 - PID file never created or disappears
    - add units After line to include statd service.
    - use systemd sd_notify() at startup.
  -Resolves: rhbz#1581502


author: Ian Kent <ikent@redhat.com> - 5.0.7-93
changelog:
  - bz1581502 - PID file never created or disappears
    - add missing BuildRequires: systemd-devel.
    - fix changelog entry revision.
  -Related: rhbz#1581502


author: Ian Kent <ikent@redhat.com> - 5.0.7-94
changelog:
  - bz1609128 - autofs reload is unable to activate new map entries,
    it is autofs restart which shows new map entries.
    - fix update_negative_cache() map source usage.
  - Resolves: rhbz#1609128


author: Ian Kent <ikent@redhat.com> - 5.0.7-95
changelog:
  - bz1612914 - [autofs]Removed entries still can be accessed
    - mark removed cache entry negative.
  - Resolves: rhbz#1612914


author: Ian Kent <ikent@redhat.com> - 5.0.7-96
changelog:
  - bz1598640 - Server availability probe broke tunneling nfs via localhost
    - remove some redundant rpc library code.
    - add port parameter to rpc_ping().
    - dont probe NFSv2 by default.
    - add version parameter to rpc_ping().
  - Resolves: rhbz#1598640


author: Ian Kent <ikent@redhat.com> - 5.0.7-97
changelog:
  - bz1358887 - On Red Hat 7.x systems if you try to access local
    filesystems using the automounter through /net then the shell
    and mount could lock up *if* the filesystem your accessing is
    double exported.
    - set bind mount as propagation slave.
    - add master map pseudo options for mount propagation.
  - Resolves: rhbz#1358887


author: Ian Kent <ikent@redhat.com> - 5.0.7-98
changelog:
  - bz1627502 - after upgrading to autofs-5.0.7-83.el7.x86_64 on RHEL 7 clients,
    amd maps /defaults key mount options are no longer working
    - fix amd parser opts option handling.
  - Resolves: rrhbz#1627502


author: Ian Kent <ikent@redhat.com> - 5.0.7-98
changelog:
  - bz1630189 - yum update hanging while restarting autofs
    - fix incorrect locking in sss lookup.
  -Resolves: rhbz#1630189


author: Ian Kent <ikent@redhat.com> - 5.0.7-100
changelog:
  - bz1599516 - [autofs] The log no longer print PID of automount process
    - add NULL check in prepare_attempt_prefix().
    - update build info with systemd.
    - use flags for startup boolean options.
    - move close stdio descriptors to become_daemon().
    - add systemd service command line option.
  - Resolves: rhbz#1599516


author: Ian Kent <ikent@redhat.com> - 5.0.7-101
changelog:
  - bz1640448 - path_resolution on an autofs managed path resets the timer. Can
    this be made configurable?
    - support strictexpire mount option.
  - Resolves: rhbz#1640448


author: Ian Kent <ikent@redhat.com> - 5.0.7-102
changelog:
  - bz1644910 - [RFE] Enable additional logging information for autofs
    - add NULL check for get_addr_string() return.
    - use malloc(3) in spawn.c.
    - add mount_verbose configuration option.
    - optionally log mount requestor process info.
    - log mount call arguments if mount_verbose is set.
  - Resolves: rhbz#1644910


author: Ian Kent <ikent@redhat.com> - 5.0.7-103
changelog:
  - bz1644933 - Segmentation fault in err_string_data_LHASH_COMP
    - openssl workaround.
  - Resolves: rhbz#1644933


author: Ian Kent <ikent@redhat.com> - 5.0.7-104
changelog:
  - bz1442063 - Parameter ghost not documented in the man pages
    - document ghost option in auto.master man page.
  - Resolves: rhbz#1442063


author: Ian Kent <ikent@redhat.com> - 5.0.7-105
changelog:
  - bz1680582 - Sanitize autofs logging
    - make expire remaining log level debug.
  - Resolves: rhbz#1680582


author: Ian Kent <ikent@redhat.com> - 5.0.7-106
changelog:
  - bz1685804 - autofs doesn't expand macros in amd map selectors
    - workaround getaddrinfo(3) ai_canonname bug.
    - improve hostname lookup error logging.
    - allow period following macro in selector value.
    - fix macro expansion in selector values.
  - Resolves: rhbz#1685804


author: Ian Kent <ikent@redhat.com> - 5.0.7-107
changelog:
  - bz1734057 - automount segfaults if a bad hosts entry is added
    in /etc/auto.master
    - fix reset flex scan buffer on init.
  - Resolves: rhbz#1734057


author: Ian Kent <ikent@redhat.com> - 5.0.7-108
changelog:
  - bz1728914 - getmntent returns additional "-hosts" entries when
    automounter is used with "hosts" map
    - remove unused function has_fstab_option().
    - remove unused function reverse_mnt_list().
    - remove a couple of old debug messages.
    - fix amd entry memory leak.
    - fix unlink_mount_tree() not umounting mounts.
    - add ignore mount option.
    - use ignore option for offset mounts as well.
    - add config option for "ignore" mount option
    - use bit flags for autofs mount types in mnt_list.
    - use mp instead of path in mnt_list entries.
    - always use PROC_MOUNTS to make mount lists.
    - add glibc getmntent_r().
    - use local getmntent_r in table_is_mounted().
    - refactor unlink_active_mounts() in direct.c.
    - don't use tree_is_mounted() for mounted checks.
    - use single unlink_umount_tree() for both direct and indirect mounts.
    - move unlink_mount_tree() to lib/mounts.c.
    - use local_getmntent_r() for unlink_mount_tree().
    - use local getmntent_r() in get_mnt_list().
    - use local getmntent_r() in tree_make_mnt_list().
  - Resolves: rhbz#1728914


author: Ian Kent <ikent@redhat.com> - 5.0.7-109
changelog:
  - bz1728914 - getmntent returns additional "-hosts" entries when
    automounter is used with "hosts" map
    - fix missing initialization of autofs_point flags.
  - Related: rhbz#1728914


author: Ian Kent <ikent@redhat.com> - 5.0.7-110
changelog:
  - bz1806514 - strictexpire option not set for offset mounts
    - also use strictexpire for offsets.
  - Resolves: rhbz#1806514


author: Ian Kent <ikent@redhat.com> - 5.0.7-111
changelog:
  - bz1806514 - strictexpire option not set for offset mounts
    - fix patch not applied.
  - Related: rhbz#1806514


author: Ian Kent <ikent@redhat.com> - 5.0.7-112
changelog:
  - bz1818664 - autofs cannot mount samba/cifs shares that end with a dollar sign
    - fix trailing dollar sun entry expansion.
  - Resolves: rhbz#1818664


author: Debarshi Ray <rishi@fedoraproject.org> - 5.9.4-1
changelog:
  - Initial build. Imported SPEC from Rawhide.
  - Removed 'Obsoletes: libopts ...' and introduced libopts subpackages to avoid
    mulitple licensing scenario.


author: Debarshi Ray <rishi@fedoraproject.org> - 5.9.4-2
changelog:
  - Prefixed libopts and libopts-devel with autogen-.
  - Removed 'BuildRequires: /usr/sbin/alternatives' and use of alternatives.
  - Added Provides & Obsoletes pair in autogen-libopts-devel according to
    Fedora naming guidelines.


author: Debarshi Ray <rishi@fedoraproject.org> - 5.9.4-3
changelog:
  - Added 'Obsoletes: autogen-manuals ...'.
  - Changed dual licensing of autogen-libopts-devel by dropping BSD.
  - Defined undefined non-weak symbols.
  - Omitted unused direct shared library dependencies.
  - Removed rpath setting bits from pkgconfig file.
  - Miscellaneous fixes.


author: Debarshi Ray <rishi@fedoraproject.org> - 5.9.4-4
changelog:
  - Changed dual licensing of autogen-libopts by dropping BSD.
  - Fixed multilib conflicts, static libraries and removed rpath setting bits
    from autoopts-config.
  - Replaced 'BuildRequires: chrpath' with 'BuildRequires: libtool' for removing
    rpaths.


author: Miroslav Lichvar <mlichvar@redhat.com> - 5.18-1
changelog:
  - Update to 5.18
  - Fix multilib conflicts (#831379)
  - Make some dependencies arch-specific
  - Remove obsolete macros


author: Lorenzo Villani <lvillani@binaryhelix.net> - 1.0-0.10.rc2
changelog:
  - fix package summary and descriptions (as requested by Richard Hughes)
  - match cmake minimum required version with the contents of CMakeLists.txt
    (paranoid fix)


author: Marius L. Jøhndal <mariuslj at ifi.uio.no> - 0:0.31.1-0.fdr.2
changelog:
  - Added new BuildReq pstoedit-devel.
  - Added missing BuildReq libexif-devel.
  - Added missing -devel requires pkgconfig, ImageMagick-devel.
  - Converted spec file to UTF-8.


author: Peter Lemenkov <lemenkov@gmail.com> - 0.31.1-23
changelog:
  - Removed static libraries from -devel
  - Changed %makeinstall to "make install DESTDIR=blablabla"
  - Fixed rhbz# 477980


author: Alexander Larsson <alexl@redhat.com> - 0.5.2-5
changelog:
  - Obsoletes howl, howl-libs, as we want to get rid of them on updates
  - No provides yet, as the howl compat library is in Avahi 0.6.0.


author: Jason Vas Dias<jvdias@redhat.com> - 0.5.2-7
changelog:
  - fix bug 172034: fix ownership of /var/run/avahi-daemon/
  - fix bug 172772: .spec file improvements from matthias@rpmforge.net


author: Jason Vas Dias<jvdias@redhat.com> - 0.6-3
changelog:
  - fix bug 172047 - tools should require python-twisted
  - fix bug 173985 - docs directory permissions


author: Jason Vas Dias <jvdias@redhat.com> - 0.6.3-1
changelog:
  - Upgrade to upstream version 0.6.3
  - fix bug 177148: initscript start should not fail if avahi-daemon running


author: Jason Vas Dias <jvdias@redhat.com> - 0.6.3-2
changelog:
  - fix bug 177610: Enable mono support with new avahi-sharp package
  - fix bug 177609: add gdbm / gdbm-devel Requires for avahi-browse


author: Jason Vas Dias <jvdias@redhat.com> - 0.6.5-1
changelog:
  - Upgrade to upstream version 0.6.5
  - Make /etc/avahi/etc and /etc/avahi/etc/localtime owned by avahi
    package; copy system localtime into chroot in post


author: Jason Vas Dias <jvdias@redhat.com> - 0.6.8-1
changelog:
  - Upgrade to upstream version 0.6.8
  - fix bug 182462: +Requires(post): initscripts, chkconfig, ldconfig


author: Bill Nottingham <notting@redhat.com> - 0.6.9-2
changelog:
  - fix scriplet error during installer
  - move service-types* to the tools package (avoids multilib conflicts)


author: Jason Vas Dias <jvdias@redhat.com> - 0.6.9-4
changelog:
  - fix scriptlet error introduced by last fix:
    if user has disabled avahi-daemon, do not enable it during post


author: Jason Vas Dias <jvdias@redhat.com> - 0.6.10-1.FC6
changelog:
  - Upgrade to upstream version 0.6.10
  - fix bug 192080: split avahi-compat-libdns_sd into separate package
                    (same goes for avahi-compat-howl)


author: Jason Vas Dias <jvdias@redhat.com> - 0.6.11-1.fc6
changelog:
  - Upgrade to upstream version 0.6.11
  - fix bug 195674: set 'use-ipv6=yes' in avahi-daemon.conf
  - fix bug 197414: avahi-compat-howl and avahi-compat-dns-sd symlinks
  - fix bug 198282: avahi-compat-{howl-devel,dns-sd-devel} Requires:


author: Martin Stransky <stransky@redhat.com> - 0.6.11-3
changelog:
  - added fix for #200767 - avahi-dnsconfd Segmentation fault
    with invalid command line argument
  - added dist tag


author: Martin Stransky <stransky@redhat.com> - 0.6.11-6
changelog:
  - added patch from #206445 - ia64: unaligned access errors seen
    during startup of avahi-daemon
  - removed unused patches


author: Martin Bacovsky <mbacovsk@redhat.com> - 0.6.16-1.fc7
changelog:
  - Resolves: #221763: CVE-2006-6870 Maliciously crafted packed can DoS avahi daemon
  - upgrade to new upstream
  - patch revision
  - Resolves: #218140: avahi configuration file wants a non-existent group


author: Martin Bacovsky <mbacovsk@redhat.com> - 0.6.17-1
changelog:
  - upgrade to new upstream 0.6.17
  - redundant patches removal
  - removed auto* stuff from specfile since that was no longer needed
  - Resolves: #232205: 'service {avahi-dnsconfd,avahi-daemon} status'
    returns 0 when the service is stopped


author: Lennart Poettering <lpoetter@redhat.com> - 0.6.20-1
changelog:
  - upgrade to new upstream 0.6.20
  - fix a few rpmlint warnings
  - create avahi-autoipd user
  - no longer create avahi user with a static uid, move to dynamic uids
  - drop a couple of patches merged upstream
  - Provide "howl" and "howl-devel"
  - Split off avahi-autoipd and avahi-dnsconfd
  - Introduce avahi-ui packages for the first time
  - Reload D-Bus config after installation using dbus-send
  - add a couple of missing ldconfig invocations


author: Lennart Poettering <lpoetter@redhat.com> - 0.6.20-5
changelog:
  - add two patches which are important to get RR updating work properly.
    Will be part of upstream 0.6.21


author: Lennart Poettering <lpoetter@redhat.com> - 0.6.21-4
changelog:
  - Ship ssh static service file by default, don't ship ssh-sftp by default
  - resolves: #269741: split off avahi-ui-tools package
  - resolves: #253734: add missing dependency on avahi-glib-devel to avahi-ui-devel


author: Lennart Poettering <lpoetter@redhat.com> - 0.6.21-5
changelog:
  - resolves #249044: Update init script to use runlevel 96
  - resolves #251700: Fix assertion in libdns_sd-compat


author: Lennart Poettering <lpoetter@redhat.com> - 0.6.21-6
changelog:
  - resolves #279301: fix segfault when no domains are configured in resolv.conf (pulled from upstream SVN r1525)


author: Lennart Poettering <lpoetter@redhat.com> - 0.6.25-6
changelog:
  - Move avahi-discover from avahi-tools to avahi-ui-tools
  - https://bugzilla.redhat.com/show_bug.cgi?id=513768


author: Christian Krause <chkr@fedoraproject.org> - 0.6.30-6
changelog:
  - Change paths for mono assemblies according to updated packaging
    guidelines (http://fedoraproject.org/wiki/Packaging:Mono)


author: Stef Walter <stefw@redhat.com> - 0.6.31-5
changelog:
  - Don't ship ssh service by default file since openssh-server isn't
    running by default, and shouldn't be advertised without user
    confirmation.


author: Michal Sekletar <msekleta@redhat.com> - 0.6.31-15
changelog:
  - enable hardened build (#1092506)
  - fix short option for --version, document -t option of avahi-autoipd (#948583)
  - fix crashes in D-Bus methods GetAlternativeHostName and GetAlternativeServiceName (#1003688)
  - fix bug when avahi-daemon ended up in a tight loop (#1081801)
  - remove prefix /home/lennart/tmp/avahi from references in man pages (#1120233)


author: Michal Sekletar <msekleta@redhat.com> - 0.6.31-17
changelog:
  - fix crash due to use of deprecated Gtk3 API (#1263720)
  - don't add 0pointer.de and zeroconf.org to default browse list (#1340837)
  - fix not publishing entries if a probing interface is removed (#1222646)


author: Michal Sekletar <msekleta@redhat.com> - 0.6.31-18
changelog:
  - create home directory for avahi-autoipd user (#1416287)
  - get rid of the dangling symlink to avahi-discover in debuginfo package (#1421229)


author: Nils Philippsen <nils@redhat.com> - 0.1.2-2
changelog:
  - split off devel-docs subpackage to make package multi-lib compliant (#477807)
  - let devel package require correct arch of base package


author: Jan Görig <jgorig@redhat.com> 5.0.2-5
changelog:
  - removed no longer needed sysconfig subpackage (#593307]
  - build with $RPM_OPT_FLAGS, show compiler commands in build log (#575425)
    fixed by Ville Skyttä
  - dropped tcp_wrappers build conditional (#537250)
  - fixed location of query.xml in config file (#556480)


author: Jan Görig <jgorig@redhat.com> - 5.0.3-4
changelog:
  - Fixed initscripts and changed default group of bacula-sd (#629697)
  - Better warning for non-configured password (#556669)


author: Jan Görig <jgorig@redhat.com> - 5.0.3-5
changelog:
  - Fixed alternatives for dbcheck (#650224)
  - Moved director log file to /var/log/bacula/
  - Changed permission of bacula-dir.conf (RHEL #651786)
  - SQLite database is created as bacula user


author: Jan Görig <jgorig@redhat.com> - 5.0.3-6
changelog:
  - Fixed previous fix of alternatives
  - Changed initscript return value for non-configured service
  - Director address is required in tray-monitor config now (#626490)


author: Simone Caronni <negativo17@gmail.com> - 5.2.1-1
changelog:
  - Updated to 5.2.1.
  - Reworked and removed some patches for 5.2.1 codebase.
  - Reworked bat installation.
  - Removed sqlite2 support.
  - Removed all the fancy database backend rebuilding.
  - Disabled libtool for bpipe-fd.so.
  - Passed plugins dir as libdir/bacula.
  - Added sql libs to alternatives.
  - Disabled traymonitor.
  - Minor fixes to spec file, rpmlint fixes.
  - Nagios patch for Enterprise FDs.
  - Removed all gui/web stuff.
  - Removed a lot of comments.
  - Conditional on Fedora 11 / RHEL 6 for bat build.
  - Obsolete bacula-sysconfdir.
  - Removed bwxconsole.


author: Simone Caronni <negativo17@gmail.com> - 5.2.2-3
changelog:
  - Add missing conditional for bat in the build section.
  - Make bat require qt4-devel on build (rhel 5 fix).
  - Bumped requirement for qt >= 4.6.2 for 5.2.2.
  - Renamed bacula-config.patch to bacula-5.2.2-config.patch as it
    always changes.
  - Fix installation of bat and check_bacula binaries. Enabling
    libtool for bpipe-fd.so produces binaries under .libs.
  - Removed fedora-usermgmt requirement for director-common.
  - Removed examples from docs and make them "noarch".
  - Fix bacula-console requirements.
  - Fix nagios plugin summary.
  - Removed checkconf functions from SysV init files and replace
    the call with the script used in systemd service files. Make
    the script available in all builds.
  - Make docs NoArch where supported.


author: Simone Caronni <negativo17@gmail.com> - 5.2.2-4
changelog:
  - Rename storage-common to storage and make it provide storage-common.
  - Move bscan to director-common.
  - Move storage scripts to storage.
  - Add html docs.
  - Install dummy catalogue library and mark it as ghost.


author: Simone Caronni <negativo17@gmail.com> - 5.2.2-5
changelog:
  - Remove redundant user/group in service files.
  - Reduce patching for what can be passed through configure.
  - Remove dsolink patch, not needed anymore.


author: Simone Caronni <negativo17@gmail.com> - 5.2.2-6
changelog:
  - Removed leftover files and small rpmlint fixes.
  - Additional file moves between packages.
  - Enabled LZO compression (5.2.1 feature).


author: Simone Caronni <negativo17@gmail.com> - 5.2.2-7
changelog:
  - Added libcap for POSIX.1e capabilities in bacula-fd (5.0.0 feature).
  - Allow systemd files to read options set in the sysconfig
    configuration files like SysV scripts to enable capabilities.
  - Set capabilities as optional for now.


author: Simone Caronni <negativo17@gmail.com> - 5.2.2-8
changelog:
  - Fixed building on RHEL/CentOS 4.
  - Split out libs package to remove dependency on bacula-common for
    bconsole, bat and check_bacula.
  - Fix typo in post scriptlet for director-sqlite.


author: Simone Caronni <negativo17@gmail.com> - 5.2.2-11
changelog:
  - Add bat html docs so the help button works.
  - Minor packaging changes.
  - Default permissions on bconsole and bat.
  - Use localhost as default on config files instead of patching fake
    example.com hostnames.
  - Add QT tray monitor.


author: Simone Caronni <negativo17@gmail.com> - 5.2.3-2
changelog:
  - Remove leftover users when removing bacula-common.
  - Allow building "--without fedora" to avoid RHEL dependency on EPEL:
    http://fedoraproject.org/wiki/PackageUserCreation


author: Simone Caronni <negativo17@gmail.com> - 5.2.3-3
changelog:
  - Remove fedora-usermgmt entirely, see thread at:
    http://lists.fedoraproject.org/pipermail/packaging/2011-December/008034.html


author: Simone Caronni <negativo17@gmail.com> - 5.2.3-4
changelog:
  - Changing uid from 33 per previous discussion, static uid
    already allocated is 133:
    "cat /usr/share/doc/setup-2.8.36/uidgid | grep bacula"


author: Simone Caronni <negativo17@gmail.com> - 5.2.3-5
changelog:
  - Trim changelog.
  - Merge bacula-director backends and move libbacats alternatives
    to bacula-libs.
  - Move bscan to bacula-storage now that is dependent only on
    bacula-libs.
  - Added README.Fedora.


author: Simone Caronni <negativo17@gmail.com> - 5.2.5-1
changelog:
  - Update to 5.2.5.
  - Change the alternative library to the base shared object name
    so the preference set is not lost when changing releases.


author: Simone Caronni <negativo17@gmail.com> - 5.2.5-2
changelog:
  - License has changed to AGPLv3 in 5.0.3. Thanks Erinn.
  - Fix ldconfig/alternatives symlinks on removal of packages and
    upgrades from recent f15/f16 changes.


author: Simone Caronni <negativo17@gmail.com> - 5.2.6-2
changelog:
  - Move libbaccats and libbacsql into bacula-libs-sql package so only
    Director and Storage daemons pull in SQL dependencies:
    http://old.nabble.com/Standalone-client-question-td33495990.html


author: Simone Caronni <negativo17@gmail.com> - 5.2.6-3
changelog:
  - Removed _install, _mkdir and _make macro.
  - Added _isa to BuildRequires.
  - Removed lzo-devel option for RHEL 4 (EOL).


author: Simone Caronni <negativo17@gmail.com> - 5.2.6-5
changelog:
  - Patch for bug #819158.
  - Updated hostname patch with official fix.
  - Sorted all BuildRequires and removed useless systemd-units.


author: Simone Caronni <negativo17@gmail.com> - 5.2.6-6
changelog:
  - Even if pulled in by dependencies, re-add explict BR on systemd-units.
  - Remove .gz suffix for man pages in file lists as per packaging guidelines.


author: Simone Caronni <negativo17@gmail.com> - 5.2.7-1
changelog:
  - Updated to 5.2.7, removed patches included upstream.
  - Removed python-devel patch, fix included in python package.
  - Replaced tabs with blanks in spec file (rpmlint).


author: Simone Caronni <negativo17@gmail.com> - 5.2.7-3
changelog:
  - Final xattr patch from upstream for bz#819158.
  - Switch alternatives to point to the unversioned system libraries.
    Pointed out by the closely related bug #829219.


author: Simone Caronni <negativo17@gmail.com> - 5.2.7-4
changelog:
  - Make a note about mt-st and mtx (bz#829888).
  - Update README.Fedora with current information.
  - Fix bacula-sd group on Fedora and RHEL >= 6 (bz#829509).


author: Simone Caronni <negativo17@gmail.com> - 5.2.8-1
changelog:
  - Update to 5.2.8.
  - Removed upstram xattr patch.
  - Added database backend detection to bacula-libs-sql for upgrades from
    <= 5.0.3-28-fc16 and 5.2.6-1.fc17.


author: Simone Caronni <negativo17@gmail.com> - 5.2.10-2
changelog:
  - Add nss-lookup.target as required to service files (rhbz#838828).
  - Fix bsmtp upstream bug sending mails to ipv4/ipv6 hosts.


author: Simone Caronni <negativo17@gmail.com> - 5.2.10-6
changelog:
  - Remove user definition during prep so they are not used during the install
    phase (rhbz#852732).
  - Enforce permissions in default config files.


author: Simone Caronni <negativo17@gmail.com> - 5.2.11-4
changelog:
  - Add a sleep timer for RHEL init scripts restart as Debian does.
    Problems verified on the sd exiting too early on VMs and slow boxes.


author: Simone Caronni <negativo17@gmail.com> - 5.2.12-2
changelog:
  - Fix fedpkg checks. Requires fedpkg > 1.10:
    http://git.fedorahosted.org/cgit/fedpkg.git/commit/?id=11c46c06a3c9cc2f58d68aea964dd37dc028e349
  - Change systemd requirements as per new package guidelines.


author: Simone Caronni <negativo17@gmail.com> - 5.2.12-4
changelog:
  - Updated SysV init script according to Fedora template:
    https://fedoraproject.org/wiki/Packaging:SysVInitScript


author: Rui Matos <rmatos@redhat.com> - 3.3.3-1
changelog:
  - Update to 3.3.3
  - Just list %{_datadir}/help/xx_YY/baobab in %files since %find_lang
    doesn't find those for us


author: Ondrej Holy <oholy@redhat.com> - 3.14.1-1
changelog:
  - Update to 3.14.1
  - Remove obsolete upstream patch
  - Add translations updates from upstream
  - Resolves: #1174557


author: Donnie Barnes <djb@redhat.com>
changelog:
  - added signal handling patch from Dean Gaudet <dgaudet@arctic.org> that
    is based on a change made in bash 2.0.  Should fix some early exit
    problems with suspends and fg.


author: Ian Macdonald <ianmacd@xs4all.nl>
changelog:
  - upgraded to version 2.02
  - Alpha, MIPS & Sparc patches removed due to lack of test platforms
  - glibc & signal patches no longer required
  - added documentation subpackage (doc)


author: Florian La Roche <Florian.LaRoche@redhat.com>
changelog:
  - add some collected patches for bash2
  - change it over to be the main bash package
  - install man-pages root:root
  - obsolete bash2, bash2-doc


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 2.04beta5
  - adapt patches
  - Fix up bashrc
  - Don't put in bashrc1, this should be done by the bash1 package
  - use install -c instead of plain install to work on *BSD
  - remove the collected patches - they're now in the base version.
  - make compressed man pages optional


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 2.04 final
  - remove the echo, pwd, test and kill man pages from the package,
    we're getting them from sh-utils


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.05-1
changelog:
  - Update to 2.05
  - Change PROMPT_COMMAND in bashrc for xterms
    to something less space consuming (#24159)
  - Provide plugs for alternate prompt commands (#30634), but don't
    default to them


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.05-2
changelog:
  - bash comes with its own copy of readline... Add the patches we're
    applying in the readline package.


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.05-5
changelog:
  - Don't set BASH_ENV in .bash_profile, it causes .bashrc to be sourced
    twice in interactive non-login shells.
  - s/Copyright/License/


author: Bernhard Rosenkraenzer <bero@redhat.com> 2.05a-9
changelog:
  - Add patch from Ulrich Drepper to get better error messages when trying
    to launch an application with a bad ELF interpreter (e.g. libc5 ld.so)
    (#60870)


author: Tim Waugh <twaugh@redhat.com> 2.05b-4
changelog:
  - Fix history substitution modifiers in UTF-8 (bug #70294, bug #71186).
  - Fix ADVANCE_CHAR at end of string (bug #70819).
  - docs: CWRU/POSIX.NOTES no longer exists, but ship POSIX.


author: Tim Waugh <twaugh@redhat.com> 2.05b-6
changelog:
  - Add the (4) patches from ftp.gnu.org (bug #75888, bug #72512).
  - Ship '.' man page, which doesn't get picked up by glob.
  - Don't install files not shipped when building.
  - Locale shell variables fix (bug #74701).


author: Tim Waugh <twaugh@redhat.com> 2.05b-23
changelog:
  - Fix a warning message (bug #79629).
  - Don't remove generated source during build, for debuginfo package.
  - Don't build with AFS support (bug #86514).


author: Tim Waugh <twaugh@redhat.com> 3.0-2
changelog:
  - Fixed brace expansion (bug #129128).
  - Build with AFS support again, since bug #86514 seems fixed upstream
    (bug #129094).


author: Tim Waugh <twaugh@redhat.com> 3.0-5
changelog:
  - Make trap usage string show POSIX usage (bug #128938).
  - Updated ${x[@]:1} expansion fix from bug-bash list.
  - Updated patch to fix unset array crash (from bug-bash list).


author: Tim Waugh <twaugh@redhat.com> 3.0-13
changelog:
  - Check for EINVAL from waitpid() and avoid WCONTINUED in that case.
  - Fixed jobs4 test.
  - Applied experimental upstream patch for trap compatibility.
  - Re-make documentation to reflect source changes.


author: Tim Waugh <twaugh@redhat.com> 3.0-21
changelog:
  - Added code to /etc/skel/.bash_logout to support the gpm selection buffer
    invalidation on virtual terminals (bug #115493).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Reverted this change:
    - Added code to /etc/skel/.bash_logout to support the gpm selection buffer
      invalidation on virtual terminals (bug #115493).


author: Tim Waugh <twaugh@redhat.com>
changelog:
  - Fixed AFS support for output redirection, so that the correct errors
    are reported for other filesystems (bug #155373).


author: Tim Waugh <twaugh@redhat.com> 3.0-36
changelog:
  - Added Url: tag (bug #172770).
  - Do not explicitly gzip info pages (bug #172770).
  - Fix permissions on bashbug (bug #172770).


author: Tim Waugh <twaugh@redhat.com> 3.0-40
changelog:
  - Fix read memleak when reading from non-blocking fd (bug #173283).
  - Missed another loop for improved sighandler patch (bug #169231).


author: Tim Waugh <twaugh@redhat.com> 3.1-1
changelog:
  - 3.1.
  - No longer need ia64, utf8, multibyteifs, jobs, sigpipe,
    read-e-segfault, manpage, crash, pwd, afs, subshell patches.
  - Remove wrap patch for now.
  - Use upstream patch to fix arrays.


author: Tim Waugh <twaugh@redhat.com> 3.1-2
changelog:
  - No longer need loadables, mbinc or shellfunc patches.
  - Use literal single-quote in bash man page where appropriate (bug #177051).


author: Tim Waugh <twaugh@redhat.com> 3.2-1
changelog:
  - Build requires autoconf and gettext.
  - 3.2.  No longer need aq, login, ulimit, sighandler or read-memleak
    patches.


author: Tim Waugh <twaugh@redhat.com> 3.2-5
changelog:
  - Added triggers for install-info (bug #225609).
  - Use full path to utilities in scriptlets (bug #225609).
  - Fix missing sh-bangs in example scripts (bug #225609).
  - Post requires ncurses (bug #224567).
  - Removed Prefix tag (bug #225609).
  - Fixed BuildRoot tag (bug #225609).
  - Removed trailing full-stop from summary (bug #225609).
  - Spec file is now UTF-8 (bug #225609).
  - Removed obsolete Obsoletes (bug #225609).
  - Moved 'make check' to new 'check' section (bug #225609).
  - Removed uses of RPM_SOURCE_DIR (bug #225609).
  - Fixed macros in changelog (bug #225609).
  - Changed tabs to spaces (bug #225609).


author: Tim Waugh <twaugh@redhat.com> 3.2-7
changelog:
  - Reinstated this change:
    - Post requires ncurses (bug #224567).
  - Reverted this change:
    - Added triggers for install-info (bug #225609).


author: Pete Graner <pgraner@redhat.com> - 3.2-15
changelog:
  - Update to the Improve bash $RANDOM pseudo RNG (bug #234906) 
    now works with subshells and make $RANDOM on demand thus reducing the 
    amount of AVCs thrown.


author: Pete Graner <pgraner@redhat.com> - 3.2-17
changelog:
  - Added bash32-018 upstream official patch
  - Added bash32-020 upstream official patch
  - Added bash32-019 upstream official patch


author: Pete Graner <pgraner@redhat.com> - 3.2-18
changelog:
  - Added bash32-021 upstream official patch
  - Added bash32-025 upstream official patch
  - Added bash32-024 upstream official patch
  - Added bash32-023 upstream official patch
  - Added bash32-022 upstream official patch


author: Tomas Janousek <tjanouse@redhat.com> - 3.2-19
changelog:
  - fix cursor position when prompt has one invisible character (#358231)
  - dropped examples/loadables/ from docs, since it wasn't possible to build them
    anyway (#174380)
  - fix #286861: Wrong input confuses bash's arithmetic unit permanently
  - fix #344411: $RANDOM stays the same when job executed in the background


author: Tomas Janousek <tjanouse@redhat.com> - 3.2-20
changelog:
  - Added bash32-026 upstream official patch
  - Added bash32-027 upstream official patch (#249987)
  - Added bash32-028 upstream official patch
  - Added bash32-029 upstream official patch (#286861)
  - Added bash32-030 upstream official patch
  - Added bash32-031 upstream official patch (#358231)
  - Added bash32-032 upstream official patch
  - Added bash32-033 upstream official patch
  - Fix insert command repeating in vi mode (#190350)


author: Roman Rakus <rrakus@redhat.com> - 3.2-28
changelog:
  - Removing Requires for mktemp and ncurses, which cause
    dependencing loop
  - Enabling #define SSH_SOURCE_BASHRC, because ssh changed.
    Resolves: #458839
  - Catch signals right after calling execve()
    Resolves: #455548


author: Jesse Keating <jkeating@redhat.com> - 3.2-29
changelog:
  - Add the Requires(post) back for ncurses-libs, so that rpm knows
    where to break the loop.  The post actually does require the curses
    libs for the sh calls.  Could consider doing this in LUA and not have
    any external deps.


author: Ville Skyttä <ville.skytta@iki.fi> - 4.1.9-2
changelog:
  - Move doc dir ownership to main package.
  - Preserve doc timestamps.
  - Add --without tests option for building without running the test suite.


author: Roman Rakus <rrakus@redhat.com> - 4.1.9-3
changelog:
  - don't segfault when trying to bind int variable to array
    with bad array subsrcipt
    Resolves: #618289


author: Roman Rakus <rrakus@redhat.com> - 4.2.37-7
changelog:
  - Update info about trap in man page
    Resolves: #799958
  - instead of setting the signal handler to SIG_IGN while installing
    the new trap handler, block the signal and unblock it after the new handler
    is installed
    Resolves: #695656


author: Trond Eivind Glomsrød <teg@redhat.com>
changelog:
  - fixed bug 7145 (long commands -> coredump) 
  - removed explicit stripping, it does this by itself anyway
  - gzipped man-pages


author: Karsten Hopp <karsten@redhat.com> 1.06-24
changelog:
  - fix buildroot
  - remove trailing dot from summary
  - fix post/preun requirements
  - use make install DESTDIR=...
  - convert changelog to utf-8
  - use smp flags
  - use 'flex -I' instead 'flex -I8' (not supported anymore)
  - run autofoo stuff to update files for current automake


author: Zdenek Prikryl <zprikryl@redhat.com> 1.06-27
changelog:
  - dc accepts the input which contains wrong symbols of radix in same way like bc
  - Resolves: #151844
  - Added library string.h to remove warnings.


author: Ondrej Vasik <ovasik@redhat.com> 1.06.95-1
changelog:
  - update to upstream alpha 1.06.95 (in use in Gentoo, Slackware
    for quite a long time, marked stable there)
  - removed already applied patches, fix small memory leak
    (gentoo patch)
  - add missing BR for bison and texinfo


author: Ondrej Vasik <ovasik@redhat.com> 1.06.95-2
changelog:
  - fix possible segfault in arrays handling(debbug #586969)
  - initialize f_void to work with math lib again(#664080)


author: Rafael Fonseca <rdossant@redhat.com> - 0.4.0-1
changelog:
  - Resolves #1460482 - rebase to new release
  - Resolves #1505506 - add support for LLVM 5.0
  - Resolves #1460482 - BPF module compilation issue
  - Partially address #1479990 - location of man pages
  - Enable ppc64(le) support without lua
  - Soname versioning for libbpf by ignatenkobrain


author: Jerome Marchand <jmarchan@redhat.com> - 0.6.1-1
changelog:
  - Rebase on v0.6.1
  - Fix tcpsubnet
  - Reinstate llcstat tool
  - Remove inject tool
  - Add NSS support to sslsniff
  - Fixes miscellaneous error uncovered by covscan


author: Scott Lampert <fortunato@heavymetal.org>
changelog:
  - Used buildroot
  - patched bin/named/ns_udp.c to use <libelf/nlist.h> for include
    on Redhat 5.0 instead of <nlist.h>


author: Manuel J. Galan <manolow@step.es>
changelog:
  - Several essential modifications to build and install correctly.
  - Modified 'ndc' to avoid deprecated use of '-'


author: Stepan Kasal <kasal@math.cas.cz>
changelog:
  - nslookup patched:
    to count numRecords properly
    to fix subsequent calls to ls -d
    to parse "view" and "finger" commands properly
    the view hack updated for bind-8 (using sed)


author: Jeff Johnson <jbj@redhat.com>
changelog:
  - update to 8.2.1.
  - add named.logrotate (#3571).
  - hack around egcs-1.1.2 -m486 bug (#3413, #3485).
  - vet file list.


author: Preston Brown <pbrown@redhat.com>
changelog:
  - use real stop and start in named.init for restart, not ndc restart, it has
    problems when named has changed during a package update... (# 4890)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Fix up location of named-bootconf.pl and make it executable
    (Bug #8028)
  - bind-devel requires bind


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - provide /var/named (fix for bugs #9847, #10205)
  - preserve args when restarted via ndc(8) (bug #10227)
  - make resolv.conf(5) a link to resolver(5) (bug #10245)
  - fix SYSTYPE bug in all makefiles
  - move creation of named user from %post into %pre


author: Nalin Dahyabhai <nalin@redhat.com>
changelog:
  - modify logrotate setup to use PID file
  - temporarily disable optimization by unsetting $RPM_OPT_FLAGS at build-time
  - actually bump the release this time


author: Bernhard Rosenkranzer <bero@redhat.com>
changelog:
  - Fix up the initscript (Bug #13033)
  - Fix build with current glibc (Bug #12755)
  - /etc/rc.d/init.d -> /etc/init.d
  - use %{_mandir} rather than /usr/share/man


author: Karsten Hopp <karsten@redhat.de>
changelog:
  - fixed logrotate script (wrong path to kill)
  - include header files in -devel package
  - bugzilla #22049, #19147, 21606


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Move run files to /var/run/named/ - /var/run isn't writable
    by the user we're running as. (Bug #20665)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Make /etc/rndc.conf and /etc/sysconfig/named noreplace
  - Make devel require bind = %{version} rather than just bind


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Update to 9.1.1rc1; fixes 17 bugs (14 of them affecting us;
    1 was fixed in a Red Hat patch already, 2 others are portability
    improvements)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - 9.1.1 probably won't be out in time, revert to 9.1.0 and apply fixes
    from 9.1.1rc2
  - bind requires bind-utils (#28317)


author: Bernhard Rosenkraenzer <bero@redhat.com>
changelog:
  - Don't use the standard rndc key from the documentation, instead, create a random one
    at installation time (#26358)
  - Make /etc/rndc.conf readable by user named only, it contains secret keys


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.0-9
changelog:
  - Work around bind 8 -> bind 9 migration problem when using buggy zone files:
    accept zones without a TTL, but spew out a big fat warning. (#31393)


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.2-1
changelog:
  - 9.1.2 final. No changes between 9.1.2-0.rc1.1 and this one, except for
    the version number, though.


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.3-0.rc1.2
changelog:
  - Add named.conf man page from bind 8.x (outdated, but better than nothing,
    - Rename the rndc key (#42895)
  - Add dnssec* man pages


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.3-3
changelog:
  - Add build dependencies (#49368)
  - Make sure running service named start several times doesn't create
    useless processes (#47596)
  - Work around the named parent process returning 0 even if the config
    file is broken (it's parsed later by the child processes) (#45484)


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.1.3-4
changelog:
  - Make sure /etc/rndc.conf isn't world-readable even after the
    %post script inserted a random key (#53009)


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.2.0-0.rc3.1
changelog:
  - 9.2.0rc3
  - remove ttl patch, I don't think we need this for 8.0.
  - remove dig.1.bz2 from the bind8-manpages tar file, 9.2 has a new dig man page
  - add lwres* man pages to -devel


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.2.0-7
changelog:
  - Don't exit if /etc/named.conf doesn't exist if we're running
    chroot (#60868)
  - Revert Elliot's changes, we do require specific glibc/glibc-kernheaders
    versions or bug #58335 will be back. "It compiles, therefore it works"
    isn't always true.


author: Bernhard Rosenkraenzer <bero@redhat.com> 9.2.1-2
changelog:
  - Move libisccc, lib isccfg and liblwres from bind-utils to bind,
    they're not required if you aren't running a nameserver.


author: Karsten Hopp <karsten@redhat.de> 9.2.1-7
changelog:
  - fix name of pidfine in logrotate script (#68842)
  - fix owner of logfile in logrotate script (#41391)
  - fix nslookup and named.conf man pages (output on stderr)
    (#63553, #63560, #63561, #54889, #57457)
  - add rfc1912 (#50005)
  - gzip all rfc's
  - fix typo in keygen.c (#54870)
  - added missing manpages (#64065)
  - shutdown named properly with rndc stop (#62492)
  - /sbin/nologin instead of /bin/false (#68607)
  - move nsupdate to bind-utils (where the manpage already was) (#66209, #66381)
  - don't kill initscript when rndc fails (reload)    (#58750)


author: Daniel Walsh <dwalsh@redhat.com> 9.2.1-12
changelog:
  - Fix log rotate to use service named reload
  - Change service named reload to give success/failure message [73770]
  - Fix File checking [75710]
  - Begin change to automatically run in CHROOT environment


