# changelog

author: Lubomir Rintel <lkundrak@v3.sk> - 1.10.2-1
changelog:
  - Update to 1.10.2 release (rh #1543498)
  - Don't grab cdc_ether devices on Sierra QMI modems (rh #1712031)


author: Wen Liang <wenliang@redhat.com> - 1:1.40.16-18
changelog:
  - vpn: fix routing rules support in vpn conenctions (RHEL-73052)
  - vpn: Place gateway route to table defined in ipvx.route-table (RHEL-73051)


author: Liwei Ge <geliwei@openanolis.org> - 1:1.40.16-18.0.1
changelog:
  - Remove NetworkManager-config-connectivity-redhat
  - cherry-pick `add sw patch #70db9120b521bf5feb6c2d9d12ed1880fa586e4f`. (nijie@wxiat.com)


author: Dan Williams <dcbw@redhat.com> 0.2-4
changelog:
  - Update from CVS
  - Improvements:
  	o Better link checking on wireless cards
  	o Panel applet now a Notification Area icon
  	o Static IP configuration support


author: <dcbw@redhat.com> - 0.3.2-2.cvs20041029
changelog:
  - #rh134893# NetworkManagerInfo and the panel-icon life-cycle
  - #rh134895# Status icon should hide when in Wired-only mode
  - #rh134896# Icon code needs rewrite
  - #rh134897# "Other Networks..." dialog needs implementing
  - #rh135055# Menu highlights incorrectly in NM
  - #rh135648# segfault with cipsec0
  - #rh135722# NetworkManager will not allow zaurus to sync via usb0
  - #rh135999# NetworkManager-0.3.1 will not connect to 128 wep
  - #rh136866# applet needs tooltips
  - #rh137047# lots of applets, yay!
  - #rh137341# Network Manager dies after disconnecting from wired network second time
  - Better checking for wireless devices
  - Fix some memleaks
  - Fix issues with dhclient declining an offered address
  - Fix an activation thread deadlock
  - More accurately detect "Other wireless networks" that are encrypted
  - Don't bring devices down as much, won't hotplug-spam as much anymore
  	about firmware
  - Add a "network not found" dialog when the user chooses a network that could
  	not be connected to


author: <dcbw@redhat.com> - 0.3.2-2.cvs20041115
changelog:
  - Update to CVS
  - Much better link detection, works with Open System authentication
  - Blacklist wireless cards rather than whitelisting them


author: <dcbw@redhat.com> - 0.3.2-3.cvs20041117
changelog:
  - Update to CVS
  - Fixes to link detection
  - Better detection of non-ESSID-broadcasting access points
  - Don't dialog-spam the user if a connection fails


author: <dcbw@redhat.com> - 0.3.2-4.3.cvs20041208
changelog:
  - Update to CVS
  - Updates to link detection, DHCP code
  - Remove NMLaunchHelper so we start up faster and don't
  	block for a connection.  This means services that depend
  	on the network may fail if they start right after NM
  - Make sure DHCP renew/rebinding works


author: <dcbw@redhat.com> - 0.3.3-1.cvs20050112
changelog:
  - Update to latest CVS
  - Fixes to DHCP code
  - Link-Local (ZeroConf/Rendezvous) support
  - Use bind in "caching-nameserver" mode to work around stupidity
  	in glibc's resolver library not recognizing resolv.conf changes
  - #rh144818# Clean up the specfile (Patch from Matthias Saou)
  - Ad-Hoc mode support with Link-Local addressing only (for now)
  - Fixes for device activation race conditions
  - Wireless scanning in separate thread


author: <dcbw@redhat.com> - 0.3.3-1.cvs20050118
changelog:
  - Fix issue where NM wouldn't recognize that access points were
  	encrypted, and then would try to connect without encryption
  - Refine packaging to put client library in separate package
  - Remove bind+caching-nameserver dep for FC-3, use 'nscd -i hosts'
  	instead.  DNS queries may timeout now right after device
  	activation due to this change.


author: Dan Williams <dcbw@redhat.com> 0.3.3-1.cvs20050124
changelog:
  - Update to latest CVS
  - Make sure we start as late as possible so that we ensure dbus & HAL
  	are already around
  - Fix race in initial device activation


author: Dan Williams <dcbw@redhat.com> 0.3.3-1.cvs20050202
changelog:
  - Display wireless network name in applet tooltip
  - Hopefully fix double-default-route problem
  - Write out valid resolv.conf when we exit
  - Make multi-domain search options work
  - Rework signal strength code to be WEXT conformant, if strength is
  	still wierd then its 95% surely a driver problem
  - Fix annoying instances of suddenly dropping and reactivating a
  	wireless device (Cisco cards were worst offenders here)
  - Fix some instances of NetworkManager not remembering your WEP key
  - Fix some races between NetworkManager and NetworkManagerInfo where
  	NetworkManager wouldn't recognize changes in the allowed list
  - Don't shove Ad-Hoc Access Point MAC addresses into GConf


author: Dan Williams <dcbw@redhat.com> 0.3.3-2.cvs20050214
changelog:
  - Never automatically choose a device that doesn't support carrier detection
  - Add right-click menu to applet, can now "Pause/Resume" scanning through it
  - Fix DHCP Renew/Rebind timeouts
  - Fix frequency cycling problem on some cards, even when scanning was off
  - Play better with IPv6
  - Don't send kernel version in DHCP packets, and ensure DHCP packets are at
  	least 300 bytes in length to work around broken router
  - New DHCP options D-BUS API by Dan Reed
  - Handle multiple domain search options in DHCP responses


author: Dan Williams <dcbw@redhat.com> - 0.4-9.cvs20050404
changelog:
  - Fix some memory leaks (Tom Parker)
  - Join to threads rather than spinning for their completion (Tom Parker)
  - Fix misuse of a g_assert() (Colin Walters)
  - Fix return checking of an ioctl() (Bill Moss)
  - Better detection and matching of hidden access points (Bill Moss)
  - Don't use varargs, and therefore don't crash on PPC (Peter Jones)


author: Dan Williams <dcbw@redhat.com> - 0.4-12.cvs20050404
changelog:
  - Enable OK button correctly in Passphrase and Other Networks dialogs when
  	using ASCII or Hex WEP keys


author: Dan Williams <dcbw@redhat.com> - 0.4-31.cvs20050616
changelog:
  - Update to latest CVS
  	o Clean up wording in Wireless Network Discovery menu
  	o Robert Love's applet beautify patch


author: Dan Williams <dcbw@redhat.com> - 0.4-32.cvs20050617
changelog:
  - Update to latest CVS
  	o VPN connection import/export capability
  	o Fix up some menu item names
  - Move nm-vpn-properties.glade to the gnome subpackage


author: David Zeuthen <davidz@redhat.com> - 0.4-33.cvs20050629
changelog:
  - Update to latest CVS to get latest VPN interface settings to satisfy
    BuildReq for NetworkManager-vpnc in Fedora Extras Development
  - Latest CVS also contains various bug- and UI-fixes


author: Dan Williams <dcbw@redhat.com> - 0.4-35.cvs20050811
changelog:
  - Update to latest CVS
  	o Use DHCP server address as gateway address if the DHCP server doesn't give
  		us a gateway address #rh165698#
  	o Fixes to the applet (Robert Love)
  	o Better caching of information in the applet (Bill Moss)
  	o Generate automatic suggested Ad-Hoc network name from machine's hostname
  		(Robert Love)
  	o Update all network information on successfull connect, not just
  		authentication method


author: Dan Williams <dcbw@redhat.com> - 0.4.1-4.cvs20051009
changelog:
  - Update to latest CVS
  	o Integrate connection progress with applet icon (Chris Aillon)
  	o More information in "Connection Information" dialog (Robert Love)
  	o Shorten time taken to sleep
  	o Make applet icon wireless strength levels a bit more realistic
  	o Talk to named using DBUS rather than spawning our own
  		- You need to add "-D" to the OPTIONS line in /etc/sysconfig/named
  		- You need to set named to start as a service on startup


author: Dan Williams <dcbw@redaht.com> - 0.4.1-5.cvs20051010
changelog:
  - Fix automatic wireless connections
  - Remove usage of NMLoadModules callout, no longer needed
  - Try to fix deadlock when menu is down and keyring dialog pops up


author: Christopher Aillon <caillon@redhat.com> - 0.5.1-3
changelog:
  - Split out the -glib subpackage to have a -glib-devel package as well
  - Add epoch to version requirements for bind and wireless-tools
  - Update URL of project


author: Dan Williams <dcbw@redhat.com> 0.5.1-8.cvs20060131
changelog:
  - Switch to autostarting the applet instead of having it be session-managed
  - Work better with non-broadcasting access points
  - Add more manufacturer default SSIDs to the blacklist


author: Dan Williams <dcbw@redhat.com> 0.5.1-10.cvs20060205
changelog:
  - Workarounds for madwifi/Atheros cards
  - Do better with non-SSID-broadcasting access points
  - Fix hangs when access points change settings


author: Dan Williams <dcbw@redhat.com> 0.5.1-13.cvs20060221
changelog:
  - Add BuildRequires: libnl-devel (#rh179438#)
  - Fix libnm_glib to not clobber an application's existing dbus connection
  	(#rh177546#, gnome.org #326572)
  - libnotify support
  - AP compatibility fixes


author: Dan Williams <dcbw@redhat.com> 0.5.1-18.cvs20060301
changelog:
  - Fix VPN-related crash
  - Fix issue where NM would refuse to activate a VPN connection once it had timed out
  - Log wpa_supplicant output for better debugging


author: Dan Williams <dcbw@redhat.com> - 0.6.2-1
changelog:
  - Update to 0.6.2:
  	* Fix various WPA-related bugs
  	* Clean up leaks
  	* Increased DHCP timeout to account for slow DHCP servers, or STP-enabled
  		switches
  	* Allow applet to reconnect on dbus restarts
  	* Add "Dynamic WEP" support
  	* Allow hiding of password/key entry text
  	* More responsive connection switching


author: Jeremy Katz <katzj@redhat.com> - 0.6.2-2.fc6
changelog:
  - use the hal device type instead of poking via ioctl so that wireless
    devices are properly detected even if the kill switch has been used


author: Bill Nottingham <notting@redhat.com> - 0.6.2-3.fc6
changelog:
  - use the same 0.6.2 tarball as FC5, so we have the same VPN interface
    (did he fire ten args, or only nine?)


author: Dan Williams <dcbw@redhat.com> - 0.7.0-0.cvs20060521
changelog:
  - Update to latest CVS
  - Drop special-case-madwifi.patch, since WEXT code is in madwifi-ng trunk now


author: Dan Williams <dcbw@redhat.com> - 0.7.0-0.cvs20060529
changelog:
  - Update to latest CVS
  	o Gnome.org #333420: dialog do not have window icons
  	o Gnome.org #336913: HIG tweaks for vpn properties pages
  	o Gnome.org #336846: HIG tweaks for nm-vpn-properties
  	o Gnome.org #336847: some bugs in nm-vpn-properties args parsing
  	o Gnome.org #341306: nm-vpn-properties crashes on startup
  	o Gnome.org #341263: Version 0.6.2-0ubuntu5 crashes on nm_device_802_11_wireless_get_type
  	o Gnome.org #341297: displays repeated keyring dialogs on resume from suspend
  	o Gnome.org #342400: Building libnm-util --without-gcrypt results in linker error
  	o Gnome.org #342398: Eleminate Gnome dependency for NetworkManager
  	o Gnome.org #336532: declaration of 'link' shadows a global declaration
  - Specfile fixes (#rh187489#)


author: Dan Williams <dcbw@redhat.com> - 1:0.6.4-2
changelog:
  - Revert FC6 to latest stable NM
  - Update to stable snapshot
  - Remove bind/caching-nameserver hard requirement


author: Dan Williams <dcbw@redhat.com> - 1:0.6.5-0.cvs20061025
changelog:
  - Update to a stable branch snapshot
      - Gnome applet timeout/redraw suppression when idle
      - Backport of LEAP patch from HEAD (from Thiago Bauermann)
      - Backport of asynchronous scanning patch from HEAD
      - Make renaming of VPN connections work (from Tambet Ingo)
      - Dial down wpa_supplicant debug spew
      - Cleanup of key/passphrase request scenarios (from Valentine Sinitsyn)
      - Shut down VPN connections on logout (from Robert Love)
      - Fix WPA passphrase hashing on PPC


author: Matthias Clasen <mclasen@redhat.com>
changelog:
  - Own the /etc/NetworkManager/dispatcher.d directory
  - Require pkgconfig for the -devel packages
  - Fix compilation with dbus 1.0


author: Dan Williams <dcbw@redhat.com> - 1:0.6.5-0.7.svn2547
changelog:
  - Update from trunk
  	* Updated translations
  	* Cleaned-up VPN properties dialogs
  	* Fix 64-bit kernel leakage issues in WEXT
  	* Don't capture and redirect wpa_supplicant log output


author: Dan Williams <dcbw@redhat.com> 1:0.6.5-4
changelog:
  - Fix ethernet link detection (gnome #354565, rh #194124)
  - Fix perpetual credentials request with private key passwords in the applet
  - Sleep a bit before activating wireless cards to work around driver bugs


author: Dan Williams <dcbw@redhat.com> 1:0.6.5-5
changelog:
  - Fix applet crash on 64-bit platforms when choosing
      "Connect to other wireless network..." (gnome.org #435036)
  - Add debug output for ethernet device link changes


author: Dan Williams <dcbw@redhat.com> 1:0.6.5-6
changelog:
  - Update to stable branch snapshot:
      - More fixes for ethernet link detection (gnome #354565, rh #194124)
      - Support for HAL-detected rfkill switches


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2880
changelog:
  - New snapshot
  	- Fix applet icon sizing on start (mclasen)
  	- Fix nm-tool installation (mclasen)
  	- Fix 'state' method call return (#303271)
  	- Fix 40-bit WEP keys (again)
  	- Fix loop when secrets were wrong/invalid
  	- Fix applet crash when clicking Cancel in the password dialog
  	- Ensure NM doesn't get stuck waiting for the supplicant to re-appear
  		if it crashes or goes away
  	- Make VPN properties applet work again
  	- Increase timeout for network password entry


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2886
changelog:
  - New snapshot
  	- Make wired device carrier state work in the applet
  	- Fix handling of errors with unencrypted APs
  	- Fix "frozen" applet icon by reporting NM state better
  	- Fix output of AP frequency in nm-tool


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2914
changelog:
  - New snapshot
  	- Add WPA passphrase support to password dialog
  	- Applet now reflects actual VPN behavior of one active connection
  	- Applet now notices VPN active connections on startup
  	- Fix connections with some WPA and WEP keys


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2961
changelog:
  - New snapshot
  	- Add timestamps to networks to connect to last used wireless network
  	- Turn autoconnect on in the applet
  	- Hidden SSID support
  	- Invalidate failed or cancelled connections again
  	- Fix issues with reactivation of the same device
  	- Handle connection updates in the applet (ex. find new VPN connections)
  	- Fix vertical sizing of menu items
  	- Fix AP list on wireless devices other than the first device in the applet
  	- Fix matching of current AP with the right menu item


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2962
changelog:
  - Fix merging of non-SSID-broadcasting APs into a device's scan list
  - Speed up opening of the applet menu


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2970
changelog:
  - Fix segfault with deferred connections
  - Fix default username with vpnc VPN plugin
  - Hidden SSID fixes


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn2994
changelog:
  - Re-enable "Connect to other network"
  - Switch to new GUI bits for wireless security config and password entry


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn3008
changelog:
  - Make WPA-EAP and Dynamic WEP options connect successfully
  - Static IPs are now handled correctly in NM itself


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn3014
changelog:
  - Suppress excessive GConf updates which sometimes caused secrets to be cleared
      at the wrong times, causing connections to fail
  - Various EAP and LEAP related fixes


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.3.svn3016
changelog:
  - Fix getting current access point
  - Fix WPA Enterprise connections
  - Wireless dialog now defaults to sensible choices based on the connection
  - Tell nscd to restart if needed, don't silently kill it


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.4.svn3020
changelog:
  - Handle PEM certificates
  - Hide WPA-PSK Type combo since it's as yet unused
  - Fix applet crash when AP security options changed and old secrets are still
      in the keyring
  - Fix applet crash connecting to unencrypted APs via the other network dialog


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.4.svn3030
changelog:
  - Bring up ethernet devices by default if no connections are defined (rh #339201)
  - Fix crash when switching networks or bringing up secrets dialog (rh #353091)
  - Fix crash when editing VPN connection properties a second time
  - Fix crash when cancelling the secrets dialog if another connection was
      activated in the mean time
  - Fix disembodied notification bubbles (rh #333391)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.6.2.svn3080
changelog:
  - Clarify naming of WPA & WPA2 Personal encryption options (rh #374861, rh #373831)
  - Don't require a CA certificate for applicable EAP methods (rh #359001)
  - Fix certificate and private key handling for EAP-TTLS and EAP-TLS (rh #323371)
  - Fix applet crash with USB devices (rh #337191)
  - Support upgrades from NM 0.6.x GConf settings


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.6.3.svn3096
changelog:
  - Fix connections when picking a WPA Enterprise AP from the menu
  - Fix issue where applet would provide multiple same connections to NM


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3133
changelog:
  - Fix applet crash when choosing to ignore the CA certificate (rh #359001)
  - Fix applet crash when editing VPN properties and VPN connection failures (rh #409351)
  - Add file filter name in certificate file picker dialog (rh #410201)
  - No longer start named when starting NM (rh #381571)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3138
changelog:
  - Fix applet connection comparison which failed to send connection updated
      signals to NM in some cases
  - Make VPN connection applet more robust against plugin failures


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3235
changelog:
  - Fix crash when activating a mobile broadband connection
  - Better handling of non-SSID-broadcasting APs on kernels that support it
      (gnome.org #464215) (rh #373841)
  - Honor DHCP-server provided MTU if present (gnome.org #332953)
  - Use previous DNS settings if the VPN concentrator doesn't provide any
      (gnome.org #346833)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3261
changelog:
  - Add CDMA mobile broadband support (if supported by HAL)
  - Rework applet connection and icon handling
  - Enable connection editor (only for deleting connections)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3302
changelog:
  - Enable system settings service
  - Allow explicit disconnection of mobile broadband devices
  - Fix applet memory leaks (rh #430178)
  - Applet Connection Information dialog tweaks (gnome.org #505899)
  - Filter input characters to passphrase/key entry (gnome.org #332951)
  - Fix applet focus stealing prevention behavior


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3370
changelog:
  - Fix crash of nm-system-settings on malformed ifcfg files (rh #434919)
  - Require gnome-icon-theme to pick up lock.png (rh #435344)
  - Fix applet segfault after connection removal via connection editor or GConf


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.8.svn3417
changelog:
  - Honor DHCP rebinds
  - Multiple active device support
  - Better error handling of mobile broadband connection failures
  - Allow use of interface-specific dhclient config files
  - Recognize system settings which have no TYPE item


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.1.svn3472
changelog:
  - Fix crashes on suspend/resume and exit (rh #437426)
  - Ensure there's always an option to chose the wired device
  - Never set default route via an IPv4 link-local addressed device (rh #437338)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.1.svn3521
changelog:
  - Show VPN failures
  - Support Static WEP key indexes
  - Fix parsing of WEP keys from ifcfg files
  - Pre-fill wireless security UI bits in connection editor and applet


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.1.svn3547
changelog:
  - Fix WEP key index handling in UI
  - Fix handling of NM_CONTROLLED in ifcfg files
  - Show device managed state in applet menu
  - Show wireless enabled state in applet menu
  - Better handling of default DHCP connections for wired devices
  - Fix loading of connection editor on KDE (rh #435344)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.1.svn3566
changelog:
  - Turn on Add/Edit in the connection editor
  - Don't flush or change IPv6 addresses or routes
  - Enhance nm-online tool
  - Some serial communication fixes for mobile broadband


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.2.svn3578
changelog:
  - Add dbus-glib-devel BuildRequires for NetworkManager-glib-devel (rh #442978)
  - Add PPP settings page to connection editor
  - Fix a few crashes with PPPoE
  - Fix active connection state changes that confused clients


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.2.svn3590
changelog:
  - Don't select devices without a default gateway as the default route (rh #437338)
  - Fill in broadcast address if not specified (rh #443474)
  - Respect manual VPN IPv4 configuration options
  - Show Connection Information for the device with the default route only


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.2.svn3614
changelog:
  - Don't ask for wireless keys when the driver sends disconnect events during
  	association; wait until the entire assocation times out
  - Replace dispatcher daemon with D-Bus activated callout
  - Fix parsing of DNS2 and DNS3 ifcfg file items
  - Execute dispatcher scripts in alphabetical order
  - Be active at runlevel 2
  - Hook up MAC address widgets for wired & wireless; and BSSID widget for wireless
  - Pre-populate anonymous identity and phase2 widgets correctly
  - Clear out unused connection keys from GConf


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.2.svn3619
changelog:
  - Fix device initialization race that caused ethernet devices to get stuck on
      startup
  - Fix PPPoE connections not showing up in the applet
  - Fix disabled OK button in connection editor some wireless and IP4 settings
  - Don't exit if HAL isn't up yet; wait for it
  - Fix a suspend/resume crash


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.2.svn3622
changelog:
  - Guess WEP key type in applet when asking for new keys
  - Correct OK button sensitivity in applet when asking for new WEP keys


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.3.svn3665
changelog:
  - Fix issues with the Fedora plugin not noticing changes made by
      system-config-network (rh #444502)
  - Allow autoconnection of GSM and CDMA connections
  - Multiple IP address support for user connections
  - Fixes for Mobile Broadband cards that return line speed on connect
  - Implement PIN entry for GSM mobile broadband connections
  - Fix crash when editing unencrypted WiFi connections in the connection editor


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.3.svn3667
changelog:
  - Restore behavior of marking wifi devices as "down" when disabling wireless
  - Fix a crash on resume when a VPN was active when going to sleep


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.3.svn3675
changelog:
  - Read global gateway from /etc/sysconfig/network if missing (rh #446527)
  - nm-system-settings now terminates when dbus goes away (rh #444976)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.9.4.svn3675
changelog:
  - Move NM later in the shutdown process (rh #449070)
  - Move libnm-util into a subpackage to allow NM to be removed more easily (rh #351101)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.10.svn3801
changelog:
  - Move VPN configuration into connection editor
  - Fix mobile broadband username/password issues
  - Fix issues with broken rfkill setups (rh #448889)
  - Honor APN setting for GSM mobile broadband configurations
  - Fix adding CDMA connections in the connection editor


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn3830
changelog:
  - Expose server-returned DHCP options via D-Bus
  - Use avahi-autoipd rather than old built-in IPv4LL implementation
  - Send hostname to DHCP server if provided (DHCP_HOSTNAME ifcfg option)
  - Support sending DHCP Client Identifier to DHCP server
  - Allow forcing 802.1x PEAP Label to '0'
  - Make connection sharing more robust
  - Show status for shared and Ad-Hoc connections if no other connection is active


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn3846
changelog:
  - Convert stored IPv4 static IP addresses to new prefix-based scheme automatically
  - Fix pppd connections to some 3G providers (rh #455348)
  - Make PPPoE "Show Password" option work
  - Hide IPv4 config options that don't make sense in certain configurations


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn3927
changelog:
  - Expose DHCP-returned options over D-Bus and to dispatcher scripts
  - Add support for customized static routes
  - Handle multiple concurrent 3G or PPPoE connections
  - Fix GSM/CDMA username and password issues
  - Better handling of unmanaged devices from ifcfg files
  - Fix timeout handling of errors during 3G connections
  - Fix some routing issues (rh #456685)
  - Fix applet crashes after removing a device (rh #457380)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn4022
changelog:
  - Fix parsing of DOMAIN in ifcfg files (rh #459370)
  - Fix reconnection to mobile broadband networks after an auth failure
  - Fix recognition of timeouts of PPP during mobile broadband connection
  - More compatible connection sharing (rh #458625)
  - Fix DHCP in minimal environments without glibc locale information installed
  - Add support for Option mobile broadband devices (like iCON 225 and iCON 7.2)
  - Add IP4 config information to dispatcher script environment
  - Merge WEP ASCII and Hex key types for cleaner UI
  - Pre-fill PPPoE password when authentication fails
  - Fixed some changes not getting saved in the connection editor
  - Accept both prefix and netmask in the conection editor's IPv4 page


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn4174
changelog:
  - Ensure that mobile broadband cards are powered up before trying to use them
  - Hostname changing support (rh #441453)
  - Fix mobile broadband secret requests to happen less often
  - Better handling of default devices and default routes
  - Better information in tooltips and notifications
  - Various UI cleanups; hide widgets that aren't used (rh #465397, rh #465395)
  - Accept different separators for DNS servers and searches
  - Make applet's icon accurately reflect signal strength of the current AP


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn4201
changelog:
  - Fix issues with hostname during anaconda installation (rh #461933)
  - Fix Ad-Hoc WPA connections (rh #461197)
  - Don't require gnome-panel or gnome-panel-devel (rh #427834)
  - Fix determination of WPA encryption capabilities on some cards
  - Fix conflicts with PPTP and vpnc plugins
  - Allow .cer file extensions when choosing certificates


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.11.svn4229
changelog:
  - More reliable mobile broadband card initialization
  - Handle mobile broadband PINs correctly when PPP passwords are also used
  - Additional PolicyKit integration for editing system connections
  - Close the applet menu if a keyring password is needed (rh #353451)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.12.svn4293
changelog:
  - Update to NetworkManager 0.7.0 RC2
  - Handle gateways on a different subnet from the interface
  - Clear VPN secrets on connection failure to ensure they are requested again (rh #429287)
  - Add support for PKCS#12 private keys (rh #462705)
  - Fix mangling of VPN's default route on DHCP renew
  - Fix type detection of qemu/kvm network devices (rh #466340)
  - Clear up netmask/prefix confusion in the connection editor
  - Make the secrets dialog go away when it's not needed
  - Fix inability to add system connections (rh #471308)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.12.svn4295
changelog:
  - Fix issues reading ifcfg files
  - Previously fixed:
  - Doesn't send DHCP hostname (rh #469336)
  - 'Auto eth0' forgets settings (rh #468612)
  - DHCP renewal sometimes breaks VPN (rh #471852)
  - Connection editor menu item in the wrong place (rh #471495)
  - Cannot make system-wide connections (rh #471308)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-0.12.svn4296
changelog:
  - Fix PIN/PUK issues with high-speed Option HSDPA mobile broadband cards
  - Fix desensitized OK button when asking for wireless keys


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-1.git20090102
changelog:
  - Update to 0.7.1 pre-release
  - Allow connections to be ignored when determining the default route (rh #476089)
  - Own /usr/share/gnome-vpn-properties (rh #477155)
  - Fix log flooding due to netlink errors (rh #459205)
  - Pass connection UUID to dispatcher scripts via the environment
  - Fix possible crash after deactivating a VPN connection
  - Fix issues with editing wired 802.1x connections
  - Fix issues when using PKCS#12 certificates with 802.1x connections


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0-2.git20090207
changelog:
  - applet: fix blank VPN connection message bubbles
  - applet: better handling of VPN routing on update
  - applet: silence pointless warning (rh #484136)
  - applet: desensitize devices in the menu until they are ready (rh #483879)
  - nm: Expose WINS servers in the IP4Config over D-Bus
  - nm: Better handling of GSM Mobile Broadband modem initialization
  - nm: Handle DHCP Classless Static Routes (RFC 3442)
  - nm: Fix Mobile Broadband and PPPoE to always use 'noauth'
  - nm: Better compatibility with older dual-SSID AP configurations (rh #445369)
  - nm: Mark nm-system-settings.conf as config (rh #465633)
  - nm-tool: Show VPN connection information
  - ifcfg-rh: Silence message about ignoring loopback config (rh #484060)
  - ifcfg-rh: Fix issue with wrong gateway for system connections (rh #476089)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.97-1
changelog:
  - Update to 0.7.1rc1
  - nm: support for Huawei E160G mobile broadband devices (rh #466177)
  - nm: fix misleading routing error message (rh #477916)
  - nm: fix issues with 32-character SSIDs (rh #485312)
  - nm: allow root to activate user connections
  - nm: automatic modem detection with udev-extras
  - nm: massive manpage rewrite
  - applet: fix crash when showing the CA certificate ignore dialog a second time
  - applet: clear keyring items when deleting a connection
  - applet: fix max signal strength calculation in menu (rh #475123)
  - applet: fix VPN export (rh #480496)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.97-4.git20090219
changelog:
  - Fix PEAP version selection in the applet (rh #468844)
  - Match hostname behavior to 'network' service when hostname is localhost (rh #441453)


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.97-5.git20090220
changelog:
  - Use IFF_LOWER_UP for carrier detect instead of IFF_RUNNING
  - Add small delay before probing cdc-acm driven mobile broadband devices


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.98-1.git20090225
changelog:
  - Fix getting secrets for system connections (rh #486696)
  - More compatible modem autodetection
  - Better handle minimal ifcfg files


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.99-1
changelog:
  - nm: make default wired "Auto ethX" connection modifiable if an enabled system settings
      plugin supports modifying connections (rh #485555)
  - nm: manpage fixes (rh #447233)
  - nm: CVE-2009-0365 - GetSecrets disclosure
  - applet: CVE-2009-0578 - local users can modify the connection settings
  - applet: fix inability to choose WPA Ad-Hoc networks from the menu
  - ifcfg-rh: add read-only support for WPA-PSK connections


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.99-2
changelog:
  - Fix conflict with NetworkManager-openconnect (rh #489271)
  - Fix possible crash when resynchronizing devices if HAL restarts


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.99-3.5
changelog:
  - nm: work around unhandled device removals due to missing HAL events (rh #484530)
  - nm: improve handling of multiple modem ports
  - nm: support for Sony Ericsson F3507g / MD300 and Dell 5530
  - applet: updated translations


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.99-4
changelog:
  - nm: fix communication with Option GT Max 3.6 mobile broadband cards
  - nm: fix communication with Huawei mobile broadband cards (rh #487663)
  - nm: don't look up hostname when HOSTNAME=localhost unless asked (rh #490184)
  - nm: fix crash during IP4 configuration (rh #491620)
  - nm: ignore ONBOOT=no for minimal ifcfg files (f9 & f10 only) (rh #489398)
  - applet: updated translations


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.99-5
changelog:
  - nm: fix crashes with out-of-tree modules that provide no driver link (rh #492246)
  - nm: fix USB modem probing on recent udev versions


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.100-1
changelog:
  - Update to 0.7.1-rc4
  - nm: use PolicyKit for system connection secrets retrieval
  - nm: correctly interpret errors returned from chmod(2) when saving keyfile system connections
  - editor: use PolicyKit to get system connection secrets


author: Dan Williams <dcbw@redhat.com> - 1:0.7.0.100-2.git20090408
changelog:
  - nm: fix recognition of Option GT Fusion and Option GT HSDPA (nozomi) devices (rh #494069)
  - nm: fix handling of spaces in DHCP 'domain-search' option
  - nm: fix detection of newer Option 'hso' devices
  - nm: ignore low MTUs returned by broken DHCP servers


author: Dan Williams <dcbw@redhat.com> - 1:0.7.1-1
changelog:
  - nm: update to 0.7.1
  - nm: fix startup race with HAL causing unmanaged devices to sometimes be managed (rh #494527)


author: Adam Jackson <ajax@redhat.com> 1:0.7.1-4.git20090414
changelog:
  - nm-save-the-leases.patch: Use per-connection lease files, and don't delete
    them on interface deactivate.


author: Dan Williams <dcbw@redhat.com> - 0.7.1-5.git20090617
changelog:
  - nm: fix AT&T Quicksilver modem connections (rh #502002)
  - nm: fix support for s390 bus types (rh #496820)
  - nm: fix detection of some CMOtech modems
  - nm: handle unsolicited wifi scans better
  - nm: resolv.conf fixes when using DHCP and overriding search domains
  - nm: handle WEP and WPA passphrases (rh #441070)
  - nm: fix removal of old APs when none are scanned
  - nm: fix Huawei EC121 and EC168C detection and handling (rh #496426)
  - applet: save WEP and WPA passphrases instead of hashed keys (rh #441070)
  - applet: fix broken notification bubble actions
  - applet: default to WEP encryption for Ad-Hoc network creation
  - applet: fix crash when connection editor dialogs are canceled
  - applet: add a mobile broadband provider wizard


author: Dan Williams <dcbw@redhat.com> - 0.7.1-7.git20090708
changelog:
  - nm: fixes for ZTE/Onda modem detection
  - nm: prevent re-opening serial port when the SIM has a PIN
  - applet: updated translations
  - editor: show list column headers


author: Dan Williams <dcbw@redhat.com> - 0.7.995-0.git20090728
changelog:
  - Update to upstream 'master' branch
  - Use modem-manager for better 3G modem support
  - Integrated system settings with NetworkManager itself
  - Use udev instead of HAL


author: Dan Williams <dcbw@redhat.com> - 0.7.995-3.git20090813
changelog:
  - nm: add iSCSI support
  - nm: add connection assume/takeover support for ethernet (rh #517333)
  - nm: IPv6 fixes
  - nm: re-add OLPC XO-1 mesh device support (removed with 0.7.0)
  - applet: better WiFi dialog focus handling


author: Dan Williams <dcbw@redhat.com> - 0.7.996-1.git20090826
changelog:
  - nm: IPv6 zeroconf support and fixes
  - nm: port to polkit (rh #499965)
  - nm: fixes for ehea devices (rh #511304) (rh #516591)
  - nm: work around PPP bug causing bogus nameservers for mobile broadband connections
  - editor: fix segfault with "Unlisted" plans in the mobile broadband assistant


author: Dan Williams <dcbw@redhat.com> - 0.7.996-2.git20090921
changelog:
  - nm: allow disconnection of all device types
  - nm: ensure that wired connections are torn down when their hardware goes away
  - nm: fix crash when canceling a VPN's request for secrets
  - editor: fix issues changing connections between system and user scopes
  - editor: ensure changes are thrown away when editing is canceled
  - applet: ensure connection changes are noticed by NetworkManager
  - applet: fix crash when creating new connections
  - applet: actually use wired 802.1x secrets after they are requested


author: Dan Williams <dcbw@redhat.com> - 0.7.996-3.git20090928
changelog:
  - nm: fix connection takeover when carrier is not on
  - nm: handle certificate paths (CA chain PEM files are now fully usable)
  - nm: defer action for 4 seconds when wired carrier drops
  - ifcfg-rh: fix writing WPA passphrases with odd characters
  - editor: fix editing of IPv4 settings with new connections (rh #525819)
  - editor: fix random crashes when editing due to bad widget refcounting
  - applet: debut reworked menu layout (not final yet...)


author: Dan Williams <dcbw@redhat.com> - 0.7.996-4.git20091002
changelog:
  - install: fix -gnome package pre script failures (rh #526519)
  - nm: fix failures validating private keys when using the NSS crypto backend
  - applet: fix crashes when clicking on menu but not associated (rh #526535)
  - editor: fix crash editing wired 802.1x settings
  - editor: fix secrets retrieval when editing connections


author: Dan Williams <dcbw@redhat.com> - 0.7.996-5.git20091021
changelog:
  - install: better fix for (rh #526519)
  - install: don't build Bluetooth bits on s390 (rh #529854)
  - nm: wired 802.1x connection activation fixes
  - nm: fix crash after modifying default wired connections like "Auto eth0"
  - nm: ensure VPN secrets are requested again after connection failure
  - nm: reset 'accept_ra' to previous value after deactivating IPv6 connections
  - nm: ensure random netlink events don't interfere with IPv6 connection activation
  - ifcfg-rh: fix writing out LEAP connections
  - ifcfg-rh: recognize 'static' as a valid BOOTPROTO (rh #528068)
  - applet: fix "could not find required resources" error (rh #529766)


author: Dan Williams <dcbw@redhat.com> - 0.7.996-7.git20091113
changelog:
  - nm: better pidfile handing (rh #517362)
  - nm: save WiFi and Networking enabled/disabled states across reboot
  - nm: fix crash with missing VPN secrets (rh #532084)
  - applet: fix system connection usage from the "Connect to hidden..." dialog
  - applet: show Bluetooth connections when no other devices are available (rh #532049)
  - applet: don't die when autoconfigured connections can't be made (rh #532680)
  - applet: allow system administrators to disable the "Create new wireless network..." menu item
  - applet: fix missing username connecting to VPNs the second time
  - applet: really fix animation stuttering
  - editor: fix IP config widget tooltips
  - editor: allow unlisted countries in the mobile broadband wizard (rh #530981)
  - ifcfg-rh: ignore .rpmnew files (rh #509621)


author: Dan Williams <dcbw@redhat.com> - 0.7.997-1
changelog:
  - core: remove haldaemon from initscript dependencies (rh #542078)
  - core: handle PEM certificates without an ending newline (rh #507315)
  - core: fix rfkill reporting for ipw2x00 devices
  - core: increase PPPoE timeout to 30 seconds
  - core: fix re-activating system connections with secrets
  - core: fix crash when deleting automatically created wired connections
  - core: ensure that a VPN's DNS servers are used when sharing the VPN connection
  - ifcfg-rh: support routes files (rh #507307)
  - ifcfg-rh: warn when device will be managed due to missing HWADDR (rh #545003)
  - ifcfg-rh: interpret DEFROUTE as never-default (rh #528281)
  - ifcfg-rh: handle MODE=Auto correctly
  - rpm: fix rpmlint errors
  - applet: don't crash on various D-Bus and other errors (rh #545011) (rh #542617)
  - editor: fix various PolicyKit-related crashes (rh #462944)
  - applet+editor: notify user that private keys must be protected


author: Dan Williams <dcbw@redhat.com> - 0.7.997-2.git20091214
changelog:
  - core: fix recognition of standalone 802.1x private keys
  - applet: clean notification text to ensure it passes libnotify validation


author: Dan Williams <dcbw@redhat.com> - 0.7.998-1.git20100106
changelog:
  - build: fix for new pppd (rh #548520)
  - core: add WWAN enable/disable functionality
  - ifcfg-rh: IPv6 addressing and routes support (rh #523288)
  - ifcfg-rh: ensure connection is updated when route/key files change
  - applet: fix crash when active AP isn't found (rh #546901)
  - editor: fix crash when editing connections (rh #549579)


author: Dan Williams <dcbw@redhat.com> - 0.7.999-1.git20100120
changelog:
  - core: support for managed-mode DHCPv6 (rh #429710)
  - ifcfg-rh: gracefully handle missing PREFIX/NETMASK
  - cli: initial preview of command-line client
  - applet: add --help to explain what the applet is (rh #494641)


author: Dan Williams <dcbw@redhat.com> - 0.8-0.2.git20100129
changelog:
  - core: add Bluetooth Dial-Up Networking (DUN) support (rh #136663)
  - core: start DHCPv6 on receipt of RA 'otherconf'/'managed' bits
  - nmcli: allow enable/disable of WiFi and WWAN


author: Kevin Kofler <Kevin@tigcc.ticalc.org> - 0.8-0.3.git20100129
changelog:
  - core: validate the autostart .desktop file
  - build: fix nmcli for the stricter ld (fixes FTBFS)
  - build: fix nm-connection-editor for the stricter ld (fixes FTBFS)
  - applet: don't autostart in KDE on F13+ (#541353)


author: Dan Williams <dcbw@redhat.com> - 0.8-0.4.git20100211
changelog:
  - core: fix mobile broadband PIN handling (rh #543088) (rh #560742)
  - core: better handling of /etc/hosts if hostname was already added by the user
  - applet: crash less on D-Bus property errors (rh #557007)
  - applet: fix crash entering wired 802.1x connection details (rh #556763)


author: Dan Williams <dcbw@redhat.com> - 0.8-1.git20100219
changelog:
  - core: update to final 0.8 release
  - core: fix Bluetooth DUN connections when secrets are needed
  - ifcfg-rh: add helper for initscripts to determine ifcfg connection UUIDs
  - applet: fix Bluetooth connection secrets requests
  - applet: fix rare conflict with other gnome-bluetooth plugins


author: Dan Williams <dcbw@redhat.com> - 0.8-2.git20100317
changelog:
  - man: many manpage updates
  - core: determine classful prefix if non is given via DHCP
  - core: ensure /etc/hosts is always up-to-date and correct (rh #569914)
  - core: support GSM network and roaming preferences
  - applet: startup speed enhancements
  - applet: better support for OTP/token-based WiFi connections (rh #526383)
  - applet: show GSM and CDMA registration status and signal strength when available
  - applet: fix zombie GSM and CDMA devices in the menu
  - applet: remove 4-character GSM PIN/PUK code limit
  - applet: fix insensitive WiFi Create... button (rh #541163)
  - applet: allow unlocking of mobile devices immediately when plugged in


author: Dan Williams <dcbw@redhat.com> - 0.8-3.git20100323
changelog:
  - core: don't exit early on non-fatal state file errors
  - core: fix Bluetooth connection issues (rh #572340)
  - applet: fix some translations (rh #576056)
  - applet: better feedback when wrong PIN/PUK is entered
  - applet: many updated translations
  - applet: PIN2 unlock not required for normal modem functionality
  - applet: fix wireless secrets dialog display


author: Dan Williams <dcbw@redhat.com> - 0.8-5.git20100408
changelog:
  - core: more flexible logging
  - core: fix crash with OLPC mesh devices after suspend
  - applet: updated translations
  - applet: show mobile broadband signal strength and technology in the icon
  - applet: fix continuous password requests for 802.1x connections (rh #576925)
  - applet: many updated translations


author: Dan Williams <dcbw@redhat.com> - 0.8-7.git20100422
changelog:
  - core: fix crash during install (rh #581794)
  - wifi: fix crash when supplicant segfaults after resume (rh #538717)
  - ifcfg-rh: fix MTU handling for wired connections (rh #569319)
  - applet: fix display of disabled mobile broadband devices


author: Dan Williams <dcbw@redhat.com> - 0.8-8.git20100426
changelog:
  - core: fix issues with IPv6 router advertisement mishandling (rh #530670)
  - core: many fixes for IPv6 RA and DHCP handling (rh #538499)
  - core: ignore WWAN ethernet devices until usable (rh #585214)
  - ifcfg-rh: fix handling of WEP passphrases (rh #581718)
  - applet: fix crashes (rh #582938) (rh #582428)
  - applet: fix crash with multiple concurrent authorization requests (rh #585405)
  - editor: allow disabling IPv4 on a per-connection basis
  - editor: add support for IPv6 DHCP-only configurations


author: Dan Williams <dcbw@redhat.com> - 0.8-10.git20100502
changelog:
  - core: IPv6 autoconf, DHCP, link-local, and manual mode fixes
  - editor: fix saving IPv6 address in user connections


author: Dan Williams <dcbw@redhat.com> - 0.8-11.git20100503
changelog:
  - core: allow IP configuration as long as one method completes (rh #567978)
  - core: don't prematurely remove IPv6 RDNSS nameservers (rh #588192)
  - core: ensure router advertisements are only used when needed (rh #588613)
  - editor: add IPv6 gateway editing capability


author: Dan Williams <dcbw@redhat.com> - 0.8-12.git20100504
changelog:
  - core: treat missing IPv6 configuration as ignored (rh #588814)
  - core: don't flush IPv6 link-local routes (rh #587836)
  - cli: update output formatting


author: Dan Williams <dcbw@redhat.com> - 0.8-13.git20100509
changelog:
  - core: restore initial accept_ra value for IPv6 ignored connections (rh #588619)
  - bluetooth: fix bad timeout on PAN connections (rh #586961)
  - applet: updated translations


author: Dan Williams <dcbw@redhat.com> - 0.8.1-0.1.git20100510
changelog:
  - core: fix handling of IPv6 RA flags when router goes away (rh #588560)
  - bluetooth: fix crash configuring DUN connections from the wizard (rh #590666)


author: Dan Williams <dcbw@redhat.com> - 0.8.1-0.2.git20100519
changelog:
  - core: use GIO in local mode only (rh #588745)
  - core: updated translations (rh #589230)
  - core: be more lenient in IPv6 RDNSS server expiry (rh #590202)
  - core: fix headers to be C++ compatible (rh #592783)
  - applet: updated translations (rh #589230)
  - applet: lock connections with well-known SSIDs to their specific AP


author: Dan Williams <dcbw@redhat.com> - 0.8.1-0.3
changelog:
  - core: fix nm-online crash (rh #593677)
  - core: fix failed suspend disables network (rh #589108)
  - core: print out missing firmware errors (rh #594578)
  - applet: fix device descriptions for some mobile broadband devices
  - keyfile: bluetooth fixes
  - applet: updated translations (rh #589230)


author: Dan Williams <dcbw@redhat.com> - 0.8.1-0.4
changelog:
  - Update to 0.8.1 release candidate
  - core: fix WWAN hardware enable state tracking (rh #591622)
  - core: fix Red Hat initscript return value on double-start (rh #584321)
  - core: add multicast route entry for IPv4 link-local connections
  - core: fix connection sharing in cases where a dnsmasq config file exists
  - core: fix handling of Ad-Hoc wifi connections to indicate correct network
  - core: ensure VPN interface name is passed to dispatcher when VPN goes down
  - ifcfg-rh: fix handling of ASCII WEP keys
  - ifcfg-rh: fix double-quoting of some SSIDs (rh #606518)
  - applet: ensure deleted connections are actually forgotten (rh #618973)
  - applet: don't crash if the AP's BSSID isn't availabe (rh #603236)
  - editor: don't crash on PolicyKit events after windows are closed (rh #572466)


author: Dan Williams <dcbw@redhat.com> - 0.8.1-1
changelog:
  - core: read nm-system-settings.conf before NetworkManager.conf (rh #606160)
  - core: fix editing system DSL connections when using keyfile plugin
  - core: work around inconsistent proprietary driver associated AP reporting
  - core: ensure empty VPN secrets are not used (rh #587784)
  - core: don't request WiFi scans when connection is locked to a specific BSSID
  - cli: show IPv6 settings and configuration
  - applet: updated translations
  - editor: fix a PolicyKit-related crash editing connections (rh #603566)
  - applet: fix saving the ignore-missing-CA-cert preference (rh #610084)
  - editor: fix listing connections on PPC64 (rh #608663)
  - editor: ensure editor windows are destroyed when closed (rh #572466)


author: Dan Williams <dcbw@redhat.com> - 0.8.1-2
changelog:
  - core: quiet annoying warnings (rh #612991)
  - core: fix retrieval of various IP options in libnm-glib (rh #611141)
  - core: ship NetworkManager.conf instead of deprecated nm-system-settings.conf (rh #606160)
  - core: add short hostname to /etc/hosts too (rh #621910)
  - core: recheck autoactivation when new system connections appear
  - core: enable DHCPv6-only configurations (rh #612445)
  - core: don't fail connection immediately if DHCP lease expires (rh #616084) (rh #590874)
  - core: fix editing of PPPoE system connections
  - core: work around twitchy frequency reporting of various wifi drivers
  - core: don't tear down user connections on console changes (rh #614556)
  - cli: wait a bit for NM's permissions check to complete (rh #614866)
  - ifcfg-rh: ignore BRIDGE and VLAN configs and treat as unmanaged (rh #619863)
  - man: add manpage for nm-online
  - applet: fix crash saving ignore-missing-CA-cert preference (rh #619775)
  - applet: hide PIN/PUK by default in the mobile PIN/PUK dialog (rh #615085)
  - applet: ensure Enter closes the PIN/PUK dialog (rh #611831)
  - applet: fix another crash in ignore-CA-certificate handling (rh #557495)
  - editor: fix handling of Wired/s390 connections (rh #618620)
  - editor: fix crash when canceling editing in IP address pages (rh #610891)
  - editor: fix handling of s390-specific options
  - editor: really fix crash when changing system connections (rh #603566)


author: Dan Williams <dcbw@redhat.com> - 0.8.1-6
changelog:
  - core: add dispatcher events on DHCPv4 and DHCPv6 lease changes
  - core: enforce access permissions when enabling/disabling WiFi and WWAN (rh #626337)
  - core: listen for UPower suspend/resume signals
  - applet: fix disabled Enable Networking and Enable Wireless menu items (rh #627365)
  - applet: updated translations
  - applet: obscure Mobile Broadband PIN in secondary unlock dialog


author: Dan Williams <dcbw@redhat.com> - 0.8.1-9
changelog:
  - core: fix suspend/resume regression (rh #638640)
  - core: fix issue causing some nmcli requests to be ignored


author: Dan Williams <dcbw@redhat.com> - 0.8.995-1.git20110308
changelog:
  - Update to NetworkManager 0.9-beta1
  - core: consolidate user and system settings services into NM itself
  - core: add WiMAX support
  - applet: support Fast User Switching


author: Dan Williams <dcbw@redhat.com> - 0.8.997-1
changelog:
  - Update to 0.8.997 (0.9-beta3)
  - ifcfg-rh: fix reading and writing of Dynamic WEP connections using LEAP as the eap method
  - wifi: fix signal strength for scanned access points with some drivers
  - applet: translation updates


author: Dan Williams <dcbw@redhat.com> - 0.8.997-4.git20110325
changelog:
  - core: fix possible libnm-glib crash when activating connections
  - applet: fix various naming and dialog title issues


author: Dan Williams <dcbw@redhat.com> - 0.8.997-5.git20110328
changelog:
  - core: fix connection deactivation on the compat interface
  - core: give default wired connections a more friendly name
  - core: fix base type of newly created wired connections
  - applet: many updated translations


author: Dan Williams <dcbw@redhat.com> - 0.8.997-7.git20110330
changelog:
  - core: fix creation of default wired connections
  - core: fix requesting new secrets when old ones fail (ex changing WEP keys)
  - editor: ensure all pages are sensitive after retrieving secrets
  - editor: fix crash when scrolling through connection lists (rh #693446)
  - applet: fix crash after using the wifi or wired secrets dialogs (rh #693446)


author: Dan Williams <dcbw@redhat.com> - 0.8.997-8.git20110331
changelog:
  - core: resurrect default VPN username
  - core: don't stomp on crypto library users by de-initing the crypto library


author: Dan Williams <dcbw@redhat.com> - 0.8.998-1
changelog:
  - Update to 0.8.998 (0.9.0-rc1)
  - core: fix near-infinite requests for passwords (rh #692783)
  - core: fix handling of wired 802.1x connections
  - core: ignore Nokia PC-Suite ethernet devices we can't use yet
  - applet: migrate 0.8 OpenVPN passwords to 0.9 formats


author: Dan Williams <dcbw@redhat.com> - 0.8.998-3.git20110419
changelog:
  - core: systemd and startup enhancements for NFS mounts
  - core: more efficient startup process
  - core: fix handling of multiple logins when one is inactive
  - core: fix handling of S390/Hercules CTC network interfaces (rh #641986)
  - core: support Easytether interfaces for Android phones
  - core: fix handling of WWAN enable/disable states
  - ifcfg-rh: harmonize handling if IPADDR/PREFIX/NETMASK with initscripts (rh #658907)
  - applet: fix connection to WPA Enterprise networks (rh #694765)


author: Dan Williams <dcbw@redhat.com> - 0.8.998-4.git20110427
changelog:
  - core: enable optimized background roaming for WPA Enterprise configs
  - core: better handling of WiFi and WiMAX rfkill (rh #599002)
  - applet: fix crash detecting Bluetooth DUN devices a second time
  - ifcfg-rh: fix managed/unmanaged changes when removing connections (rh #698202)


author: Dan Williams <dcbw@redhat.com> - 0.8.999-1
changelog:
  - core: ensure DER format certificates are correctly recognized (rh #699591)
  - core: fix WINS server handling in client helper libraries
  - core: enhance dispatcher script environment to include IPv6 and VPN details
  - applet: migrate openswan connections to 0.9
  - editor: improve usability of editing IP addresses (rh #698199)


author: Dan Williams <dcbw@redhat.com> - 0.8.999-2.git20110509
changelog:
  - core: fix possible crash when connections are deleted
  - core: fix exported symbols in libnm-util and libnm-glib
  - core/applet: updated translations


author: Dan Williams <dcbw@redhat.com> - 0.8.999-3.git20110526
changelog:
  - compat: fix activation/deactivation of VPN connections (rh #699786)
  - core: fix autodetection of previously-used hidden wifi networks
  - core: silence error if ConsoleKit database does not yet exist (rh #695617)
  - core: fix Ad-Hoc frequency handling (rh #699203)
  - core: fixes for migrated OpenConnect VPN plugin connections
  - core: various fixes for VPN connection secrets handling
  - core: send only short hostname to DHCP servers (rh #694758)
  - core: better handling of PKCS#8 private keys
  - core: fix dispatcher script interface name handling
  - editor: fix potential crash when connection is invalid (rh #704848)
  - editor: allow _ as a valid character for GSM APNs


author: Dan Williams <dcbw@redhat.com> - 0.8.9997-1.git20110531
changelog:
  - editor: fix resizing of UI elements (rh #707269)
  - core: retry wired connections when cable is replugged
  - core: fix a few warnings and remove some left-over debugging code


author: Dan Williams <dcbw@redhat.com> - 0.8.9997-3.git20110613
changelog:
  - keyfile: better handling of missing certificates/private keys
  - core: fix issues handling "always-ask" wired and WiFi 802.1x connections (rh #703785)
  - core: fix automatic handling of hidden WiFi networks (rh #707406)
  - editor: fix possible crash after reading network connections (rh #706906)
  - editor: make Enter/Return key close WiFi password dialogs (rh #708666)


author: Dan Williams <dcbw@redhat.com> - 0.8.9997-4.git20110620
changelog:
  - core: don't cache "(none)" hostname at startup (rh #706094)
  - core: fix handling of VPN connections with only system-owned secrets
  - core: fix optional waiting for networking at startup behavior (rh #710502)
  - ifcfg-rh: fix possible crashes in error cases
  - ifcfg-rh: fix various IPv4 and IPv6 handling issues
  - applet: add notifications of GSM mobile broadband registration status
  - editor: move secrets when making connections available to all users or private
  - applet: don't show irrelevant options when asking for passwords


author: Dan Williams <dcbw@redhat.com> - 0.8.9997-5.git20110702
changelog:
  - core: ensure users are authorized for shared wifi connections (CVE-2011-2176) (rh #715492)
  - core: retry failed connections after 5 minute timeout
  - core: immediately request new 802.1x 'always ask' passwords if they fail
  - core: add MAC blacklisting capability for WiFi and Wired connections
  - core: retry failed connections when new users log in (rh #706204)
  - applet: updated translations
  - core: drop compat interface now that KDE bits are updated to NM 0.9 API


author: Dan Williams <dcbw@redhat.com> - 0.8.9997-6.git20110721
changelog:
  - core: updated Russian translation (rh #652904)
  - core: fix possible crash if secrets are missing
  - core: append interface name for IPv6 link-local DNS server addresses (rh #720001)
  - core: fix setting hostname from DHCP options (rh #719100)
  - libnm-util: GObject introspection annotation fixes
  - libnm-util: ensure IP address/route prefixes are valid
  - ifcfg-rh: read anonymous identity for 802.1x PEAP connections (rh #708436)
  - applet: show notifications on CDMA home/roaming changes
  - applet: fix various issues saving VPN secrets
  - editor: allow exporting VPN secrets
  - editor: default to IPv6 "automatic" addressing mode


author: Dan Williams <dcbw@redhat.com> - 0.9.0-1
changelog:
  - Update to 0.9 release
  - core: fix issue where scan results could be ignored
  - core: ensure agent secrets are preserved when updating connections
  - core: don't autoconnect disabled modems
  - core: fix race when checking modem enabled/disabled status after disabling
  - core: ensure newly installed VPN plugins can actually talk to NM
  - core: add support for 802.1X certificate subject matching
  - libnm-glib: various introspection fixes
  - applet/editor: updated translations


author: Dan Williams <dcbw@redhat.com> - 0.9.1.90-1
changelog:
  - Update to 0.9.1.90 (0.9.2-beta1)
  - core: fix IPv6 link-local DNS servers in the dnsmasq DNS plugin
  - cli: add ability to delete connections
  - keyfile: fix an issue with duplicated keyfile connections
  - core: ensure the 'novj' option is passed through to pppd
  - core: store timestamps for VPN connections too (rh #725353)


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.1.90-2.git20110927
changelog:
  - core: ifcfg-rh: remove newlines when writing to ifcfg files (CVE-2011-3364) (rh #737338)
  - core: change iscsiadm path to /sbin/iscsiadm in ifcfg-rh plugin (rh #740753)
  - core: fix refcounting when deleting a default wired connection (lp:797868)


author: Adam Williamson <awilliam@redhat.com> - 1:0.9.1.90-5.git20110927
changelog:
  - Rebuilt for glibc (rh #747377)
  - core: fix setting hostname from DHCP options (rh #719100)
  - skip a release to keep up with F16


author: Dan Williams <dcbw@redhat.com> - 0.9.2-1
changelog:
  - core: fix possible crash when talking to ModemManager
  - core: improve handling of rfkill on some machines (eeepc 1005HA and others)
  - ifcfg-rh: don't use spaces in ifcfg file names (rh #742273)
  - core: accept IPv6 Router Advertisements when forwarding is on
  - core: bump dnsmasq cache size to 400 entries
  - core: ensure IPv6 static routes are flushed when device is deactivated
  - ifcfg-rh: fix changing WPA connections to WEP
  - core: fix setting hostname from DHCP (rh #719100)
  - libnm-glib: fix various GObject introspection issues (rh #747302)
  - core: don't change routing or DNS if no devices are managed
  - core: ensure IPv6 RA-provided routes are honored


author: Dan Williams <dcbw@redhat.com> - 0.9.3-0.1
changelog:
  - Update to 0.9.4 snapshot
  - wimax: enable optional support for Intel WiMAX devices
  - core: use nl80211 for WiFi device control
  - core: add basic support for Infiniband IP interfaces
  - core: add basic support for bonded interfaces
  - core: in-process IP configuration no longer blocks connected state


author: Dan Williams <dcbw@redhat.com> - 0.9.3.995-0.4
changelog:
  - Update to 0.9.3.995 (0.9.4-beta1)
  - core: add support for bonding and VLAN interfaces
  - core: add support for Internet connectivity detection
  - core: add support for IPv6 Privacy Extensions
  - core: fix interaction with firewalld restarts


author: Dan Williams <dcbw@redhat.com> - 0.9.3.995-0.5
changelog:
  - core: fix a crash with ipw2200 devices and adhoc networks
  - core: fix IPv6 addressing on newer kernels
  - core: fix issue with VPN plugin passwords (rh #802540)
  - cli: enhancements for Bonding, VLAN, and OLPC mesh devices
  - ifcfg-rh: fix quoting WPA passphrases that include quotes (rh #798102)
  - libnm-glib: fix some issues with duplicate devices shown in menus


author: Dan Williams <dcbw@redhat.com> - 0.9.3.995-0.6
changelog:
  - core: fix issue with carrier changes not being recognized (rh #800690)
  - editor: warn user if CA certificate is left blank


author: Dan Williams <dcbw@redhat.com> - 0.9.3.997-0.7
changelog:
  - Update to 0.9.3.997 (0.9.4-rc1)
  - core: fix possible WiFi hang when connecting to Ad-Hoc networks
  - core: enhanced IPv6 compatibility
  - core: proxy DNSSEC data when using the 'dnsmasq' caching nameserver plugin
  - core: allow VPNs to specify multiple domain names given by the server
  - core: fix an issue creating new InfiniBand connections
  - core/applet/editor: disable WiFi Ad-Hoc WPA connections until kernel bugs are fixed


author: Dan Williams <dcbw@redhat.com> - 0.9.3.997-1
changelog:
  - applet: move to network-manager-applet RPM
  - editor: move to nm-connection-editor RPM
  - libnm-gtk: move to libnm-gtk RPM


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.5.95-1.git20120713
changelog:
  - Update to 0.9.5.95 (0.9.6-rc1) snapshot
  - core: add autoconnect, driver-versioni and firmware-version properties to NMDevice
  - core: various IPv6 improvements
  - core: reduce number of changes made to DNS information during connection setup
  - core: add Vala language bindings
  - vpn: support IPv6 over VPNs
  - wifi: add on-demand WiFi scan support


author: Dan Williams <dcbw@redhat.com> - 0.9.5.96-1
changelog:
  - Update to 0.9.6-rc2
  - core: fix race between parallel DHCP client invocations
  - core: suppress a useless warning (rh #840580)
  - ifcfg-rh: fix segfault with malformed values (rh #841391)
  - ifcfg-rh: ignore IP config on bond slave configurations (rh #838907)


author: Dan Williams <dcbw@redhat.com> - 0.9.7.0-3.git20121004
changelog:
  - Forward-port some forgotten fixes from F17
  - Fix networked-filesystem systemd dependencies (rh #787314)
  - Don't restart NM on upgrade, don't stop NM on uninstall (rh #811200)


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.7.0-8.git20121004
changelog:
  - Apply patch from master to update hostname (rh #875085)
  - spec: create /etc/NetworkManager/dnsmasq.d (rh #873621)


author: Dan Williams <dcbw@redhat.com> - 0.9.7.997-1
changelog:
  - Update to 0.9.8-beta2
  - core: ignore bridges managed by other tools (rh #905035)
  - core: fix libnl assert (rh #894653)
  - wifi: always use Proactive Key Caching with WPA Enterprise (rh #834444)
  - core: don't crash when Internet connection sharing fails to start (rh #883142)


author: Dan Williams <dcbw@redhat.com> - 0.9.8.1-1.git20130327
changelog:
  - Update to 0.9.8.2 snapshot
  - core: fix VLAN parent handling when identified by UUID
  - core: quiet warning about invalid interface index (rh #920145)
  - core: request 'static-routes' from DHCP servers (rh #922558)
  - core: fix crash when dbus-daemon is restarted (rh #918273)
  - core: copy leasefiles from /var/lib/dhclient to fix netboot (rh #916233)
  - core: memory leak and potential crash fixes
  - ifcfg-rh: ensure missing STP property is interpreted as off (rh #922702)


author: Dan Williams <dcbw@redhat.com> - 0.9.8.1-2.git20130507
changelog:
  - core: fix issue with UI not showing disconnected on rfkill
  - core: memory leak fixes
  - core: silence warning about failure reading permanent MAC address (rh #907912)
  - core: wait up to 120s for slow-connecting modems
  - core: don't crash on PPPoE connections without a wired setting
  - core: ensure the AvailableConnections property is always correct
  - keyfile: ensure all-default VLAN connections are read correctly
  - core: suppress kernel's automatic creation of bond0 (rh #953466)
  - libnm-glib: make NMSecretAgent usable with GObject Introspection
  - libnm-util: fix GObject Introspection annotations of nm_connection_need_secrets()
  - core: documentation updates


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-1.git20130514
changelog:
  - Enable hardened build
  - Update to 0.9.10 snapshot
  - cli: new capabilities and somewhat re-arranged syntax
  - core: generic interface support
  - core: split config support; new "server mode" options
  - core: allow locking connections to interface names


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-2.git20130515
changelog:
  - Update for systemd network-online.target (rh #787314)
  - Add system service for the script dispatcher (rh #948433)


author: Dan Winship <danw@redhat.com> - 0.9.9.0-6
changelog:
  - Belatedly update udev directory for UsrMove
  - Fix incorrect dates in old changelog entries to avoid rpm warnings


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-9.git20130807
changelog:
  - core: fix assert on multi-hop routes (rh #989022)
  - core: fix dispatcher systemd unit enabling (rh #948433)
  - ifcfg-rh: ignore emacs temporary lockfiles (rh #987629)
  - core: fix various routing issues and interaction with kernel events
  - cli: confirm saving connections when autoconnect is enabled (rh #953296)
  - cli: automatically change method when static IP addresses are added
  - core: preserve externally added IPv4 routes and addresses


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-10.git20130906
changelog:
  - core: fix bug which disallowed deleting connections (rh #997568)
  - core: add support for Team devices
  - core: enable NetworkManager-wait-online by default (rh #816655)
  - core: fix crash when 'gre' and 'macvlan' links change (rh #997396)
  - core: fail activation when invalid static routes are configured (rh #999544)
  - core: enhance connectivity checking to include portal detection
  - core: allow hyphens for MAC addresses (rh #1002553)
  - core: remove NetworkManager-created software devices when they are deactivated (rh #953300)
  - core: fix handling of some DHCP client identifiers (rh #999503)
  - core: correctly handle Open vSwitch interfaces as generic interfaces (rh #1004356)
  - core: better handle Layer-2-only connections (rh #979288)
  - cli: enhanced bash completion
  - cli: make the 'describe' command more visible (rh #998002)
  - cli: fix bug rejecting changes to Wi-Fi channels (rh #999999)
  - cli: update bash completion to suggest connection names (rh #997997)
  - cli: fix tab completion for aliases in edit mode
  - cli: ask whether to switch IP method to 'auto' when all addresses are deleted (rh #998137)
  - cli: request missing information when --ask is passed (rh #953291)
  - cli: add 'remove' command to edit mode
  - cli: fix creation of secure Wi-Fi connections (rh #997969) (rh #997555)
  - cli: default autoconnect to no and ask whether to activate on save (rh #953296)
  - man: clarify manpage text (rh #960071) (rh #953299)
  - man: fix errors in the nmcli help output and manpage (rh #997566)
  - ifcfg-rh: only write IPV6_DEFAULTGW when there's actually a default gateway (rh #997759)
  - ifcfg-rh: fix handling of legacy-format routes file with missing gateway


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-11.git20130913
changelog:
  - core: actually enable ModemManager 1.0 support
  - libnm-glib: fix nm_remote_connection_delete() not calling callback (rh #997568)
  - cli: ensure terminal is reset after quitting
  - cli: set wep-key-type properly when editing (rh #1003945)
  - man: fix typo in nmcli examples manpage (rh #1004117)
  - core: fix setting VLAN ingress/egress mappings
  - core: allow creating VLANs from interfaces other than Ethernet (rh #1003180)
  - cli: fix input/output format conversion (rh #998929)


author: Dan Winship <danw@redhat.com> - 0.9.9.0-13.git20131001
changelog:
  - core: fix bridge device creation (#1012532)
  - core,settings: do not call functions with connection==NULL (rh #1008151)
  - cli: accept gateway in the IP questionnaire of 'nmcli -a con add' (rh #1007368)
  - cli: always print success message (not only in --pretty mode) (rh #1006444)
  - cli: fix bond questionnaire to be able to set miimon (rh #1007355)
  - ifcfg-rh: if IPv4 is disabled put DNS domains (DOMAIN) into IPv6 (rh #1004866)
  - platform: fix a crash when nm_platform_sysctl_get() returns NULL (rh #1010522)
  - platform: fix InfiniBand partition handling (rh #1008568)
  - infiniband: only check the last 8 bytes when doing hwaddr matches (rh #1008566)
  - bluez: merge adding support for BlueZ 5 (bgo #701078)
  - api: clarify lifetime and behavior of ActiveConnection's SpecificObject property (rh #1012309)
  - vpn: fix connecting to VPN (bgo #708255) (rh #1014716)
  - rdisc: do not crash on NDP init failures (rh #1012151)
  - cli: be more verbose when adding IP addresses in questionnaire (rh #1006450)
  - team: chain up parent dispose() in NMDeviceTeam dispose() (rh #1013593)
  - translation updates


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-14.git20131003
changelog:
  - core: fix DHCPv6 address prefix length (rh #1013583)
  - cli: enhance bonding questionaire (rh #1007355)
  - core: fix crash with Bluez5 if PAN connection is not defined (rh #1014770)
  - libnm-glib: fix various memory leaks that could cause UIs to mis-report state
  - core: fix issues with mis-configured IPv6 router advertisements (rh #1008104)
  - cli: fix potential crash editing connections (rh #1011942)


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.9.0-15.git20131003
changelog:
  - ifcfg-rh: fix crash in ifcfg-rh plugin when reloading connections (rh #1023571)
  - ifcfg-rh: fix crash when having connections with NEVER_DEFAULT (rh #1021112)
  - core: fix segfault in nm-policy when setting default route for vpn (rh #1019021)
  - ifcfg-rh: fix crash when reading connection (assert) (rh #1025007)
  - core: allow IPv4 to proceed if IPv6 is globally disabled but set to "auto" (rh #1012151)


author: Dan Winship <danw@redhat.com> - 0.9.9.0-18.git20131003
changelog:
  - nmcli: add "con load" to manually load an ifcfg file
  - vpn: fix logging to help debug rh #1018317
  - bridge: fix crash with bridge ports with empty settings (rh #1031170)


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.9.0-19.git20131003
changelog:
  - dispatcher: fix crash on exit while logging from signal handler (rh #1017884)
  - core: workaround crash when connecting to wifi (rh #1025371)
  - ethernet: don't crash if device doesn't have a MAC address (rh #1029053)
  - libnm-glib: fix crash by taking additional ref in result_cb() (rh #1030403)
  - ifcfg-rh: fix ignoring updates that don't change anything


author: Dan Williams <dcbw@redhat.com> - 0.9.9.0-21.git20131003
changelog:
  - core: wait for link before declaring startup complete (rh #1034921)
  - core: ignore RA-provided IPv6 default routes (rh #1029213)
  - core: set IPv4 broadcast address correctly (rh #1032819)


author: Thomas Haller <thaller@redhat.com> - 0.9.9.0-28.git20140131
changelog:
  - add nmtui package
  - bugfix caching of libnl objects (caused error with new libnl3 version when activating bridges) (rh #1063290)
  - fix NMManager:startup tracking (pending action) (rh #1030583)


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.9.1-2.git20140314
changelog:
  - Update to a git snapshot (git20140314 git:45a326d)
  - Fix Obsoletes and Requires to perform updates correctly


author: Jiří Klimeš <jklimes@redhat.com> - 0.9.9.1-3.git20140317
changelog:
  - Update to a git snapshot (git20140317 git:a1e89b4)
  - platform: fix NM crash if link has no name (e.g. for failed VPN connection)
  - libnm-util/cli: fix bridge priority default value (rh #1073664)


author: Dan Winship <danw@redhat.com> - 0.9.9.1-4.git20140319
changelog:
  - Update to a git snapshot (git20140319 git:3980806)
  - Rename NetworkManager-atm package to NetworkManager-adsl
  - Rename NetworkManager-bt package to NetworkManager-bluetooth


author: Jiří Klimeš <jklimes@redhat.com> - 1:0.9.10.0-14.git20140704
changelog:
  - vpn: propagate daemon exec error correctly (bgo #739436)
  - core: do not assert when a device is enslaved externally (rh #1167345)


author: Dan Winship <danw@redhat.com> - 1:1.0.0-2
changelog:
  - build: fix NetworkManager-bluetooth dep on NetworkManager-wwan
  - build: re-enable hardware plugins on s390


author: Jiří Klimeš <jklimes@redhat.com> - 1:1.0.4-0.2.git20150707.cf15f2a
changelog:
  - Update to a new 1.0.3 development snapshot (git20150707)
  - core: fix handling of ignore-auto-* properties (rh #1239184)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.0.4-2
changelog:
  - Fix an assertion failure in nmcli (rh #1244048)
  - Fix default route handling on assumed connections (rh #1245648)


author: Thomas Haller <thaller@redhat.com> - 1:1.0.6-0.2.20150813git7e2caa2
changelog:
  - fix crash when deactivating assumed device (rh #1253949)
  - backport wifi scan options for ssid
  - use plain HTTP URI for connectivity check


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.2.0-0.3.20151023gite01c175
changelog:
  - Drop the NetworkManager-devel subpackage (folded into libnm-glib-devel)
  - Update to a later snapshot


author: Thomas Haller <thaller@redhat.com> - 1:1.2.0-0.6.beta1
changelog:
  - specfile: remove no longer needed 10-ibft-plugin.conf and sync with contrib/rpm
  - core: backport fix for missing braces bug in platform


author: Thomas Haller <thaller@redhat.com> - 1:1.2.2-2
changelog:
  - dns: clear cache of dnsmasq when updating DNS configuration (rh#1338731)
  - dns: fix restarting dnsmasq instance
  - spec: depend bluetooth subpackage on exact wwan version
  - all: fix some memleaks


author: Thomas Haller <thaller@redhat.com> - 1:1.4.0-4
changelog:
  - wifi: fix another activation failure when changing MAC address (rh#1371478, bgo#770456, bgo#770504)


author: Thomas Haller <thaller@redhat.com> - 1:1.5.2-2
changelog:
  - fix enabling ifcfg-rh plugin by default (rh#1397938)
  - move translation files from core to libnm/glib subpackages


author: Thomas Haller <thaller@redhat.com> - 1:1.5.2-3
changelog:
  - fix enabling ifcfg-rh plugin by default for +=/-= operations (rh#1397938)
  - fix missing symbol _nm_device_factory_no_default_settings


author: Thomas Haller <thaller@redhat.com> - 1:1.6-0.2.rc1
changelog:
  - Update with fixes from upstream nm-1-6 branch
  - build: let libnm and glib package conflict (rh #1406454)


author: Thomas Haller <thaller@redhat.com> - 1:1.8.0-2
changelog:
  - dhcp: don't add route to DHCP4 server (rh #1448987)
  - device: update external configuration before commit (rh #1449873)
  - libnm: fix NUL termination of device's description (rh #1443114)
  - libnm, core: ensure valid UTF-8 in device properties (rh #1443114)
  - core: fix device's UDI property on D-Bus (rh #1443114)
  - ifcfg-rh: omit empty next hop for routes in legacy format (rh #1452648)
  - core: fix persisting managed state of device (rh #1440171)
  - proxy: fix use-after-free (rh #1450459)
  - device: don't wrongly delay startup complete waiting for carrier (rh #1450444)


author: Thomas Haller <thaller@redhat.com> - 1:1.8.0-4
changelog:
  - ifcfg-rh: fix writing legacy NETMASK value (rh #1445414)
  - tui: fix crash during connect (rh #1456826)
  - libnm: fix libnm rejecting VLAN ID 4095 (rh #1456911)
  - bluetooth: fix crash on connecting to a NAP (rh #1454385)
  - device: release removed devices from master on cleanup (rh #1448907)
  - nmcli: fix crash when setting 802-1x.password-raw (rh #1456362)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.8.0-5
changelog:
  - bond: fix crash comparing mode while generating bond connection (rh #1459580)
  - connectivity: fix route penalty if WWAN and BT device using ip-ifindex (rh #1459932)
  - device: persist nm-owned in run state (rh #1376199)
  - device: fix assuming master device on restart (rh #1452062)
  - device: apply route metric penality only when the default route exists (rh #1459604)
  - connectivity: fix periodic connectivity check (rh #1458399)
  - bond: improve option matching on daemon restart (rh #1457909)
  - device: fix touching device after external activation (rh #1457242)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.8.0-6
changelog:
  - device: don't change MTU unless explicitly configured (rh #1460760)
  - core: don't remove external IPv4 addresses (rh #1459813)
  - cli: fix output of iface in overview output (rh#1460219)
  - ppp: unexport NMPPPManager instance on dispose (rh#1459579)
  - cli: remove spurious device names from wifi subcommands output (rh#1460527)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.8.2-1
changelog:
  - Update to 1.8.2 release
  - dhcp/dhclient: improve "interface" statement parsing
  - dns: fix public suffix check on search domains (rh #1404350)


author: Stephen Gallagher <sgallagh@redhat.com> - 1:1.8.2-2
changelog:
  - NetworkManager-wifi and NetworkManager-glib-devel should require
    NetworkManager, not provide it.


author: Thomas Haller <thaller@redhat.com> - 1:1.8.4-1
changelog:
  - Update to 1.8.4 release
  - don't install NetworkManager-wait-online in network-online.target.wants (rh#1455704)


author: Thomas Haller <thaller@redhat.com> - 1:1.8.4-3
changelog:
  - cli: fix crash in interactive mode for "describe ."
  - libnm/{vpn,remote}-connection: disconnect signal handlers when disposed
  - libnm/manager: disconnect from signals on the proxy when we're disposed


author: Thomas Haller <thaller@redhat.com> - 1:1.8.4-4
changelog:
  - device: fix frozen notify signals on unrealize error path
  - device: fix delay startup complete for unrealized devices
  - keyfile: fix handling routes with metric zero


author: Thomas Haller <thaller@redhat.com> - 1:1.8.4-6
changelog:
  - systemd: let NM-w-o.service require NetworkManager service (rh #1452866)
  - platform: really treat dsa devices as regular wired ethernet (rh #1371289)
  - libnm: fix accessing enabled and metered properties


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.12.0-0.4
changelog:
  - Update to 1.11.4, a development snapshot of NetworkManager 1.12
  - Switch to Python 3-only build root


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.14.0-4
changelog:
  - Don't depend on openvswitch (rh #1629178)
  - device: don't remove routes when the interface is down (rh #1636715)


author: Thomas Haller <thaller@redhat.com> - 1:1.14.0-6
changelog:
  - dhcp: fix out-of-bounds heap write for DHCPv6 with internal plugin (CVE-2018-15688)
  - dhcp: revert letting internal DHCP generate default client-id based on MAC address (rh #1640464)
  - dhcp: support "duid" setting for ipv4.dhcp-client-id
  - dhcp: support "${MAC}" identifier for connection.stable-id
  - dhcp: support dhcp-plugin device spec for matching devices in NetworkManager.conf
  - dhcp: install configuration snippet in config-server package for ipv4.dhcp-client-id=mac (rh #1640494)
  - dns: remove limitation for six DNS search entries (rh #1649704)
  - libnm: fix crash cancelling activation from within callback (rh #1643085)


author: Thomas Haller <thaller@redhat.com> - 1:1.14.0-9
changelog:
  - dhcp: fix default client-id for NetworkManager-config-server (rh #1658057)
  - connectivity: fix crash and portal detection (rh #1658217)
  - core: combine secret-key with machine-id for host identity (rh #1642023)
  - SR-IOV related fixes (rh #1651578, rh #1651576, rh #1651979)
  - core: fix updating agent-owned secrets (rh #1658771)
  - core: no longer set rp_filter sysctl (rh #1651097)
  - device: don't take device down when changing MAC address (rh #1659063)
  - doc: use pregenerated manual pages and gtk-doc from source tarball


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.14.0-10
changelog:
  - ifcfg-rh: fix reading SR-IOV settings
  - dhcp: support client-id and DUID for infiniband (rh #1658057)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.14.0-11
changelog:
  - device: ensure IP configuration is restored when link goes up (rh #1636715)
  - dhcp: fix client-id and DUID for infiniband (rh #1658057)
  - dhcp: change internal DHCP plugin's ipv4.dhcp-client-id setting to "mac" (rh #1661165)


author: Lubomir Rintel <lrintel@redhat.com> - 1:1.20.0-0.1
changelog:
  - Update to a 1.20 snapshot
  - core: fix a possible crash on device removal (rh #1659790)
  - core: fix automatic activation of software deviecs (rh #1667874)
  - team: use strict JSON parsing for configuration (rh #1691619)
  - team: don't kill teamd for external devices (rh #1693142)
  - logging: don't misuse SYSLOG_FACILITY field in journal (rh #1709741)


author: Lubomir Rintel <lrintel@redhat.com> - 1:1.20.0-0.2
changelog:
  - Update to a newer 1.20 snapshot
  - ovs: support dpdk interfaces (rh #1612503)
  - libnm-core: change unsupported modes for arp_ip_targets bond option (rh #1718173)
  - ipv6: add 'disabled' method (rh #1643841)
  - device: fix matching parent device by connection UUID (rh #1716438)
  - cli: fix default value for team.runner-min-ports (rh #1716987)
  - initrd: re-enable the generator (rh #1626348)


author: Thomas Haller <thaller@redhat.com> - 1:1.20.0-0.4
changelog:
  - Update to 1.20-rc1 snapshot
  - settings: support read-only directory for keyfile profiles (rh #1674545)
  - settings: add AddConnection2 D-Bus API to suppress autoconnect (rh #1677068)
  - settings: add no-reapply flat to Update2 D-Bus API (rh #1677070)
  - openvswitch: don't release slaves on quit (rh #1733709)
  - dhcp: expose private options for internal DHCP plugin (rh #1663253)
  - device: fix route table setting when re-activating device (rh #1719318)
  - man: clarify example in nm-openvswitch manual page (rh #1638038)
  - man: various improvements of manual pages (rh #1612554)


author: Thomas Haller <thaller@redhat.com> - 1:1.20.0-1
changelog:
  - Update to 1.20.0 release
  - fix license comments for RPM package (rh #1723395)
  - dhcp: disable experimental nettools DHCP plugin


author: Thomas Haller <thaller@redhat.com> - 1:1.20.0-3
changelog:
  - wifi: detect FT support per device to fix issues with driver support (rh #1743730)
  - doc: fix default values in pre-generated documentation (rh #1737945)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.22.0-0.1
changelog:
  - Update to 1.21.3, a development snapshot of NetworkManager 1.22
  - support configuring default route as a regular, static route (rh #1714438)


author: Thomas Haller <thaller@redhat.com> - 1:1.22.0-0.2
changelog:
  - Update to 1.22-rc1 (1.21.90)
  - large internal rework of libnm's NMClient
  - dhcp: switch implementation of "internal" DHCP to nettools' n-dhcp4
  - add support for carrier state of devices on D-Bus/libnm (rh #1722024)
  - cloud-setup: add initial and experimental tool for configuring in cloud (rh #1642461)
  - dhcp: support configuring FQDN hostname flags (rh #1649368)


author: Thomas Haller <thaller@redhat.com> - 1:1.22.2-1
changelog:
  - Update to 1.22.2
  - core,libnm: expose capability for OVS support (rh #1785147)
  - dhcp: various bugfixes for nettools n-dhcp4 plugin


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.22.4-1
changelog:
  - Update to 1.22.4
  - dhcp: fix behavior of internal DHCP client when the server sends a NAK (rh #1787219)


author: Antonio Cardace <acardace@redhat.com> - 1:1.22.6-1
changelog:
  - Update to 1.22.6
  - nm-device: add new pending action to keep the device busy when in between states (rh #1759956)
  - cloud-setup: avoid unsupported settings in systemd service unit (rh #1791758)
  - do not create virtual device if master is not present (rh #1795919)
  - allow IPv6 RA timeout to be set to a value higher than 120 seconds (rh #1795957)
  - fix behaviour when 'ipv4.dhcp-timeout' option is set to 'infinity' (rh #1791378)


author: Antonio Cardace <acardace@redhat.com> - 1:1.22.8-1
changelog:
  - Update to 1.22.8
  - Added configuration option to customize IPv6 RA timeout (rh #1801158)
  - Removed length limitation for OVS Bridge, Patches and Interfaces (only Patch types) names (rh #1788432)
  - Reworked asynchronous deactivation of OVS interfaces (rh #1787989, rh #1782701)
  - Fixed failure when creating team interfaces (rh #1798947)
  - ifcfg-rh: fix clearing ovs slave type from ifcfg-rh file (rh #1804167)
  - Fixed bug causing virtual devices to not be available after AddConnection()/Update() (rh #1804350)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.22.8-3
changelog:
  - dhcp: keep trying after a send failure (rh #1806516)
  - ovs: fail port enslavement when the bridge is not found (rh #1797696)


author: Thomas Haller <thaller@redhat.com> - 1:1.22.8-4
changelog:
  - core: fix leaking device state files in /run (rh #1810153)
  - dhcp: fix crash in nettools client when leaking GSource (rh #1810188)


author: Thomas Haller <thaller@redhat.com> - 1:1.25.1-1
changelog:
  - update to 1.25.1 (development)
  - improve documentation (rh #1651594, rh #1819259)
  - vrf: add support (rh #1773908)
  - bond: improve setting default options for miimon and updelay (rh #1805184, rh #1806549)
  - bluetooth: fix crash handling DUN modem (rh #1826635)
  - core: fix potential infinite loop with prefix delegation (rh #1488030)
  - initrd: fixes for running NetworkManager in initrd (rh #1627820, #1710935, #1744935, #1771792)
  - core: prevent multiple attempts to create default wired connection (rh #1687937)
  - bridge: support more options (rh #1755768)
  - libnm,dbus: expose HwAddress for all device types (rh #1786937)
  - core: fix route priority for IPv6 (rh #1814557)
  - core: fix crash during reapply (rh #1816067)
  - core: clear IP address from bridge slave (rh #1816517)
  - ovs: support changing MTU of OVS interfaces (rh #1820052)
  - nm-online: support setting timeout for NetworkManager-wait-online (rh #1828458)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.25.2-1
changelog:
  - update to 1.25.2 (development)
  - support ethtool coalesce and ring options (rh #1614700)
  - core: improve synchronization of qdiscs with kernel (rh #1815875)
  - team: support running without D-Bus (rh #1784363)
  - core: fix potential crash when autoactivating child connections (rh #1778073)
  - ethernet: reset original autonegotiation/speed/duplex settings on deactivation (rh #1807171)
  - core: fix setting IPv6 token in kernel (rh #1819680)


author: Thomas Haller <thaller@redhat.com> - 1:1.26.0-0.1
changelog:
  - update to 1.26-rc1 (1.25.90)
  - core: support more tc qdiscs (tbf and sfq) (rh #1546802)
  - core: support match devices for connection profile by PCI address (ID_PATH) (rh #1673321)
  - ovs: fix peer property for OVS patch interface (rh #1845216)
  - doc: add manual pages nm-settings-dbus and nm-settings-nmcli (rh #1614726)
  - wifi: don't block autoconnect for profiles that never succeeded to connect (rh #1781253)
  - dbus,nmcli: highlight externally managed devices (rh #1816202)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.26.0-0.2
changelog:
  - update to 1.26-rc2 (1.25.91)
  - initrd: set ipv6.method=auto when using IPv4 static configuration (rh #1848943)
  - cloud-setup: add support for Google Cloud load-balancing routes (rh #1821787)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.26.0-0.2.1
changelog:
  - device: restart DHCP only for devices that are active or activating (rh #1852612)
  - initrd: fix generating default BOOTIF= connection (rh #1853277)
  - ovs: fix race condition when setting MAC address for ovs interfaces (rh #1852106)


author: Thomas Haller <thaller@redhat.com> - 1:1.26.0-1
changelog:
  - update to 1.26.0
  - device: reset SR-IOV parameters on activation failure (rh #1819587)
  - initrd: enable ipv6.method=auto with ip=dhcp6 (rh #1854323)
  - core: add "nm-shared" zone for firewalld for shared mode (rh #1834907)
  - ppp: fix taking control of link (rh #1849386)


author: Antonio Cardace <acardace@redhat.com> - 1:1.26.0-2
changelog:
  - core: fix generation of local routes for VRF devices (rh #1857133)
  - team: fix crash on failure to connect to teamd (rh #1856723)
  - core: fix detecting failure of master active-connection (rh #1845018)
  - core: fix warning about setting active_slave of bond when activating master (rh #1858326)
  - import translations (rh #1820552)


author: Thomas Haller <thaller@redhat.com> - 1:1.26.0-3
changelog:
  - core: fix managing devices after resuming from sleep (rh #1855563)
  - dhcp: fix BPF filter for internal client on big endian arch (rh #1861488)
  - core: support warning log setting IPv6 MTU with IPv6 disabled (rh #1840989)
  - wifi: fix crash parsing incomplete BSS info (rh #1866395)


author: Antonio Cardace <acardace@redhat.com> - 1:1.26.0-4
changelog:
  - bond: fix Reapply does not update bond options (rh #1847814)
  - dhcp: support DHCPv6 fqdn_fqdn option for hostname (rh #1858344)


author: Antonio Cardace <acardace@redhat.com> - 1:1.26.0-7
changelog:
  - dhcp: add dhcp-vendor-class-identifier option (rh #1871042)
  - initrd: parse 'rd.net.dhcp.vendor-class' kernel cmdline arg (rh #1872299)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.28.0-0.1
changelog:
  - Update to 1.27.3 (development)
  - device: enforce the absence of a master during activation (rh #1869079)
  - bond: fix race condition setting the "active_slave" option (rh #1856640)


author: Antonio Cardace <acardace@redhat.com> - 1:1.30.0-0.1
changelog:
  - Update to 1.29.1 (development)
  - add library for handling profiles in keyfile format (rh #1813334)
  - initrd: allow disabling NICs during boot (rh #1883958)
  - allow `NM.Device.get_applied_connection_async()` to run by non-privilege user (rh #1882380)
  - nmcli ignores /etc/terminal-colors.d/nmcli.scheme (rh #1886336)
  - pass bridge master to wpa_supplicant when Wlan is part of bridge (rh #1888051)
  - add infiniband support in initrd (rh #1883173)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.30.0-0.2
changelog:
  - device: fix crash in nm_device_reactivate_ip_config()
  - dns: fix crash in systemd-resolved DNS plugin (rh #1894839)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.30.0-0.3
changelog:
  - Update to 1.29.3 (development)
  - Support changing external-ids of OVS bridges and interfaces (rh #1866227)
  - Add a hostname setting (rh #1766944)
  - Support creating veth interfaces (rh #1901523)
  - initrd: fix parsing of ip= arguments with empty first token (rh #1900260)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.30.0-0.4
changelog:
  - Update to 1.29.6 (development)
  - initrd: disable ipv4 and ipv6 by default for vlan parent connection (rh #1903175)
  - initrd: fix parsing of ip= argument with dotted interface name (rh #1898294)


author: Thomas Haller <thaller@redhat.com> - 1:1.30.0-0.6
changelog:
  - Update to 1.29.8 (development)
  - initrd: accept zero-byte prefix for BOOTIF MAC address (rh #1904099)
  - core: fix bond port wrongly detached by dispather call (rh #1888348)
  - cloud-setup: add manual page (rh #1867997)
  - core: fix handling timeout for IPv6 RDNSS,DNSSL option in RA (rh #1874743)


author: Thomas Haller <thaller@redhat.com> - 1:1.30.0-0.7
changelog:
  - Update to 1.29.9 (development)
  - By default check all devices for hostname reverse DNS lookup (rh #1766944)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.30.0-0.8
changelog:
  - Update to 1.29.10 (development)
  - bond: introduce new 'vlan+srcmac' xmit_hash_policy option (rh #1915457)
  - ovs: clean up interfaces from ovsdb at startup (rh #1861296)


author: Antonio Cardace <acardace@redhat.com> - 1:1.30.0-0.9
changelog:
  - Update to 1.29.11 (development)
  - bond: fix changing mode when the device is created externally (rh #1870691)
  - ovs: fix firewalld configuration for ovs-ports (rh #1921107)
  - ovs: avoid race condition when system interface is removed from ovsdb (rh #1923248)
  - doc: mention NETMASK as alternative to PREFIX for addresses in `man nm-settings-ifcfg-rh` (rh #1925123)


author: Thomas Haller <thaller@redhat.com> - 1:1.30.0-0.10
changelog:
  - Update to 1.30-rc1 (1.29.90-dev) (development)
  - cloud-setup: fix removing IPv4 address (rh #1920838)


author: Thomas Haller <thaller@redhat.com> - 1:1.30.0-3
changelog:
  - Increase LimitNOFILE to allow more than 1024 file descriptors (rh #1926599).
    This requires a suitable libndp version that can handle many file descriptors (rh #1933041).


author: Wen Liang <wenliang@redhat.com> - 1:1.32.0-0.4
changelog:
  - Update to 1.31.5 (development)
  - core: configure MTU early before DHCP completes (rh #1890234)
  - core: fix activation handling for ports (rh #1955101, rh #1959961)
  - core: add support for ethtool pause parameters (rh #1899372)
  - dhcp: support option 249 (Microsoft Classless Static Route) (rh #1959461)


author: Thomas Haller <thaller@redhat.com> - 1:1.32.0-0.5
changelog:
  - update to 1.32-rc1 (1.31.90) (release candidate)
  - core: allow to preserved external TFilter and QDisc settings (rh #1928078)
  - bond: support "tlb_dynamic_lb" in "balance-alb" mode (rh #1959934)


author: Wen Liang <wenliang@redhat.com> - 1:1.32.0-1
changelog:
  - update to 1.32.0 release
  - veth: fix null error when deleting the device (rh #1915278)
  - veth: fix crash when deleting the device profile (rh #1915276)
  - firewall: add new "nftables" firewall-backend (rh #1548825)
  - DNS: fix lookup of hostname via DNS (rh #1970335)


author: Wen Liang <wenliang@redhat.com> - 1:1.32.2-1
changelog:
  - update to 1.32.2 release
  - device: prefer IPv6 not-deprecated addresses for hostname lookup (rh #1820770)
  - docs: describe qdiscs and tfilters in nm-settings manpage (rh #1847894)
  - cloud-setup: preserve IPv4 addresses/routes/rules from profile (rh #1971527)
  - daemon: performance improvements (rh #1847125)
  - dhcp/systemd: ignore FORCERENEW requests for DHCPV4 (rh #1961251, CVE-2020-13529)
  - Add bridge_role in 802-3-ethernet.s390-options using nmcli (rh #1935842)


author: Gris Ge <fge@redhat.com> - 1:1.32.4-1
changelog:
  - Upgrade to 1.32.4 with fixes of:
  - nmcli: show DNS SEARCH field in device information. (rh #1852317)
  - device: avoid crash setting VPN config during unrealize. (rh #1912423)
  - core: send ARP announcements when there is carrier. (rh #1956793)
  - core: add ipv[46].required-timeout option to wait for IP configuration while activating. (rh #1961666)
  - core: start DHCPv6 when a prefix delegation is needed for shared mode. (rh #1973199)
  - ifcfg: log warning about invalid keys in ifcfg files. (rh #1959656)
  - cloud-setup: add support for Aliyun cloud. (rh #1823315)


author: Gris Ge <fge@redhat.com> - 1:1.32.6-1
changelog:
  - Upgrade to 1.32.6 release
  - core: fix adding stale local routes when address changes (rh #1979192)
  - dhcp: handle filename/bootfile_name DHCP option and write it to device state
    file for initrd/kickstart (rh #1979387)
  - initrd: add "ib.pkey=" command line option (rh #1805708)
  - core: introduce "keep-configuration" device option to forcefully activate a
    profile on start (rh #1934122)


author: Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.32.8-1
changelog:
  - Upgrade to 1.32.8 release
  - firewalld: configure zones on "Reloaded" signal (rh #1982403)
  - ethtool: support configuring newer gigabit ethernet speeds (rh #1897004)
  - core: fix wrong MTU for bridge interfaces (rh #1973536)
  - cloud-setup: fix gateway address for Aliyun cloud (rh #1823315)


author: Wen Liang <wenliang@redhat.com> - 1:1.32.10-1
changelog:
  - update to 1.32.10 release
  - nm-initrd-generator: add kernel command line options ethtool autoneg and speed (rh #1940934)
  - IP: fix the order of IP addresses during service restart (rh #1988751)


author: Ana Cabral <acabral@redhat.com> - 1:1.34.0-0.1
changelog:
  - Upgrade to 1.33.2 release (development) (rh #1996617)
  - Obtain permanent hardware address via netlink or lookup via ethtool (rh #1987286)
  - Show more information about routes in nmcli (rh #1870059)
  - Add test for creation and activation of new connection via interface (rh #1763054)
  - ethtool: fix setting autonegotiation/speed on reactivation (rh #1897004)
  - Fix MTU's decrease after the removal of 802-3-ethernet configuration (rh #1973536)


author: Ana Cabral <acabral@redhat.com> - 1:1.34.0-0.2
changelog:
  - Upgrade to 1.33.3 release (development)
  - platform: don't listen for tc netlink messages (rh #1753677)
  - cloud-setup: better handle other route configuration (rh #2006370)
  - Fix autoneg advertisement (rh #1897004)


author: Ana Cabral <acabral@redhat.com> - 1:1.34.0-0.3
changelog:
  - Upgrade to 1.33.4 release (development)
  - Deprecate "master"/"slave" on bonding and bridge API (rh #1949023)
  - core: Fix configuration reload for active devices (rh #1852445)
  - Update systemd-udev dependency (rh #2012123)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.36.0-0.1
changelog:
  - Upgrade to 1.35.1 release (development)
  - core: refactor IP configuration code (rh #1868254)
  - core: fix deleting external route during service restart (rh #2010640)


author: Wen Liang <wenliang@redhat.com> - 1:1.36.0-0.2
changelog:
  - Upgrade to 1.35.2 release (development)
  - initrd: handle ip=dhcp,dhcp6 specially to wait for both IPv4 and IPv6 (rh #1961666)
  - bridge: fix ageing_time bridge option (rh #1871950)
  - core: make sure Device and AC emit StateChanged a bit later (rh #2006677)
  - ovsdb: deactivate removed device if does not have a master (rh #2022275)
  - nmcli: fix setting wake-on-lan property on edit mode (rh #2016348)
  - core: fix wrong DHCPv6 timeouts due to endianness problem (rh #2027267)


author: Wen Liang <wenliang@redhat.com> - 1:1.36.0-0.3
changelog:
  - Upgrade to 1.35.3 release (development)
  - device: fix update of the ip-iface property (rh #2027490)
  - platform: add bpf filter to ignore routes from routing daemons (rh #1861527)


author: Wen Liang <wenliang@redhat.com> - 1:1.36.0-0.4
changelog:
  - Upgrade to 1.35.4 release (development)
  - ipv4ll: fix assert on external LL address removal (rh #2028404)
  - openvswitch: add DPDK n_rxq configuration option (rh #2001563)
  - device: ignore ndisc signal if device has no ifindex (rh #2013266)
  - bluetooth: fix invalid assertion in NMBluezManager:dispose() (rh #2028427)
  - supplicant: enable SAE-H2E (rh #2019396)


author: Thomas Haller <thaller@redhat.com> - 1:1.36.0-0.6
changelog:
  - Upgrade to 1.35.6 release (development)
  - Move ifup/ifdown scripts to new NetworkManager-initscripts-updown package (rh #2022418)
  - wwan: fix assertion failure in modem/ppp code (rh #2028385)
  - core: fix performance regression with 500vlans test (rh #2028849)
  - core: drop defective BPF filter for netlink sockets that caused hangs (rh #2037411)
  - initrd: add support for rd.znet_ifnames (rh #1980387)


author: Thomas Haller <thaller@redhat.com> - 1:1.36.0-0.7
changelog:
  - Upgrade to 1.35.7 release (development)
  - core: fix crash related to DHCPv6 leases (rh #2028849)
  - wifi: fix stale ActiveAccessPoint in D-Bus (rh #1983747)
  - libnm: fix dangling pointer in NMObject (rh #2039331)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.36.0-0.8
changelog:
  - Upgrade to 1.35.91 release (release candidate)
  - bond: fix duplicate IPv4 address detection (rh #2028751)
  - core: add support for blackhole routes (rh #1937823) (rh #2013587)
  - core: re-assess IP configuration if one IP family times out (rh #2051904)
  - ovs: remove ovsdb entry on interface removal (rh #2047302)
  - ovs: properly clean up devices on daemon shutdown (rh #2029937)
  - core: avoid losing addresses on handover from initrd to ral root (rh #2047302)
  - core: fix a possibe assertion failure in ACD (rh #2047788)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.36.0-0.9
changelog:
  - revert: generate docs during build instead of using pre-generated (rh #1995915)
  - Upgrade to 1.35.92 (release candidate)
  - ppp: increase disconnect timeout (rh #2049596)
  - core: finish activation after all objects are committed (rh #2043133)
  - ipv6: add support for multipath routes (rh #1837254)
  - keyfile: do not write empty string list properties (rh #2022623)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.36.0-1
changelog:
  - Upgrade to 1.36.0 release
  - core: avoid losing L3 configuration the second time it's applied (rh #2043514)
  - ovs: avoid removing OVSDB entries on daemon shutdown (rh #2055665)
  - nmcli: fix defaults for some properties on interactive add (rh #2053603)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.37.2-1
changelog:
  - Upgrade to 1.37.2 release (development)
  - core: preserve external ports during checkpoint rollback (rh #2035519)
  - core: fix ovs bridge deletion (rh #1935026)
  - core: shorten hostname when too long (rh #2033643)
  - nm-online: bump the timeout upper limit to 2073600 seconds (rh #2025617)
  - cloud-setup: fix crash when handling sigterm (rh #2027674)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.37.3-1
changelog:
  - Upgrade to 1.37.3 release (development)
  - core: allow reapply on autoconnect-slaves property change (rh #2065049)
  - wifi: do not advertise channels outside regulatory domain (rh #2062785)
  - wifi: warn about WEP being phased out (rh #2030997)
  - bond: reject reapply when fail_over_mac was changed (rh #2003214)


author: Ana Cabral <acabral@redhat.com> - 1:1.39.0-1
changelog:
  - Update to 1.39.0 release (development)
  - ovs, dpdk: fix creating ovs-interface when the ovs-bridge is netdev
    (rh #2001792)


author: Thomas Haller <thaller@redhat.com> - 1:1.39.2-1
changelog:
  - Update to 1.39.2 release (development)
  - dhcp: set "src" attribute for DHCP routes (rh #1995372)
  - dhcp: drop internal DHCPv4 client based on systemd code (rh #2073067)
  - core: delay startup complete for DNS update (rh #2049421)
  - nmcli: support offline mode to create and edit keyfiles (rh #1361145)


author: Thomas Haller <thaller@redhat.com> - 1:1.39.3-1
changelog:
  - Update to 1.39.3 release (development)
  - dhcp: save leases in /run (rh #1943153)
  - ovs: use asynchronous attach-port (rh #2052441)
  - device: set MTU after attaching bond port (rh #2071985)
  - l3cfg: drop NM_L3_CFG_COMMIT_TYPE_ASSUME and assume_config_once (rh #2077605)


author: Ana Cabral <acabral@redhat.com> - 1:1.39.5-1
changelog:
  - Update to 1.39.5 release (development)
  - device: commit l3cfg on link change only when the device is activating (rh #2079054)
  - l3cfg: during reapply, also clear IPv6 temporary addresses (rh #2082230)
  - dhcp: support overlong DHCP host names (rh #2033643)
  - cloud-setup: reorder addresses to honor "primary_ip_address" (rh #2082000)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.39.6-1
changelog:
  - Update to 1.39.6 release (development)
  - Implement ACD (address conflict detection) for DHCPv4 (rh #1713380)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.39.7-1
changelog:
  - Update to 1.39.7 release (development)
  - core: cancel the IP check on deactivation (rh #2080928)
  - core: ensure DHCP is restarted every time the link goes up (rh #2079406)
  - core: fix a leak of L3 configuration memory (rh #2083453)
  - ppp: fix a race with pppd when removing addresses (rh #2085382)
  - wifi: fix a crash when checking WEP supplicant capability (rh #2092782)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.39.8-1
changelog:
  - Update to 1.39.8 release (development)
  - core: make ipv6.addr-gen-mode default configurable (rh #1743161) (rh #2082682)
  - dhcpv6: finish DAD before considering a lease to be good (rh #2096386)
  - core: add connection.wait-activation-delay property (rh #2008337)


author: Vojtech Bubela <vbubela@redhat.com> - 1:1.39.10-1
changelog:
  - Update to 1.39.10 release (development)
  - initrd: set a default carrier timeout of 10 seconds in initrd (rh #2079277)
  - dhcp: wait DAD completion for DHCPv6 addresses (rh #2096386)
  - libnm: support wait-activation-delay property (rh #2008337)
  - veth: fix veth activation on booting (rh #2105956)
  - support a ipv6.addr-gen-mode knob in the global config (rh #208268)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.39.11-1
changelog:
  - Update to 1.39.11 release (development)
  - dhcp: fix EXTENDED DHCP event to accept lease for dhclient plugin (rh #2109285)
  - ovs: honor unmanaged setting also for interfaces that fail (rh #2077950)


author: Ana Cabral <acabral@redhat.com> - 1:1.39.90-1
changelog:
  - Update to 1.39.90 release (release candidate)
  - bridge: fix reapply of non-bridge properties (rh #2092762)
  - bridge: fix wired.mtu reapply (rh #2076131)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.40.2-1
changelog:
  - Update to 1.40.2 release
  - core: fix persisting Infiniband partition connections (rh #2122703)
  - core: wait for carrier before resolving hostname via DNS (rh #2118817)
  - core: fix handling of autoconnect-retries with multiconnect (rh #2039734)
  - nmcli: allow removing a port connection from a bond (rh #2126262)
  - initrd: decrease autoconnect priority for initrd connections (rh #2089707)
  - dhcp: wait DAD completion for DHCPv6 addresses (send decline) (rh #2096386, rh #2099794)
  - ovs: wait that links disappear during initial cleanup (rh #2060031)


author: Beniamino Galvani <bgalvani@redhat.com> - 1:1.40.10-1
changelog:
  - Update to 1.40.10 release
  - cloud-setup: preserve addresses added externally (rh #2132754)
  - veth: fix detection of existing interface and peer (rh #2129829)
  - dns: ensure dnsmasq is stopped after disabling it and a restart (rh #2120763)


author: Lubomir Rintel <lkundrak@v3.sk> - 1:1.40.12-1
changelog:
  - Update to 1.40.12 release
  - core: retry if a rtnetlink socket runs out of buffer space (rh #2154350)


author: Fernando Fernandez Mancera <ferferna@redhat.com> - 1:1.40.16-5
changelog:
  - support bond port prio property (rh #1920398)
  - team: don't try to connect to teamd in update_connection() (rh #2182029)


author: Pavel Cahyna <pcahyna@redhat.com> - 2.0.32-2
changelog:
  - Resolve issues found by rpmdiff
    - add explicit Requires: on subpackages to avoid the need to test
      interoperability between the various combinations of old and new
      subpackages


author: Pavel Cahyna <pcahyna@redhat.com> - 2.0.32-3
changelog:
  - Add a patch to resolve one more issue found by rpmdiff/rpminspect:
    fix getaddrinfo detection to avoid using gethostbyname.


author: Al Stone <ahs3@redhat.com> - 20190108-1
changelog:
  - Update to 20190108 source tree, including patch refeshes.
  - Replace use of strncpy() with memcpy() when moving ASCII bytes around;
    the tables use "strings" but they are seldom null terminated, causing
    GCC9 to complain.  Closes BZ#1674629.


author: Al Stone <ahs3@redhat.com> - 20190509-2
changelog:
  - Added an arm7hl specific fix acenv.h; GCC9 on arm7hl can now deal
    with misalignments so the unaligned patch could be relaxed a bit
  - the templates test was failing because of the backup left behind
    by the patch macro, so change the invocation of the macro.


author: Weitao Zhou <zhouwt@linux.alibaba.com> - 20190509-5.0.1
changelog:
  - Fix upgrade and downgrade warning (xuchunmei)
    * remove %pre to avoid warning when upgrade from old version
    * exec "alternatives --install" to avoid missing of acpixtract and acpidump
      when downgrade to old version
  - Fix gcc10 -fno-common compile issue for compatible with gcc10 build (Liwei Gei)
  - ignore mismatched ACPI Warning message at misc tests


author: Sumit Bose <sbose@redhat.com> - 0.8.2-6
changelog:
  - [abrt] [faf] adcli: raise(): /usr/sbin/adcli killed by 6 [#1806260]
  - No longer able to delete computer from AD using adcli [#1846882]
  - adcli: presetting $computer in $domain domain failed: Cannot set computer
    password: Authentication error [#1846878]
  - Typo in adcli update --help option [#1791611]
  - Manpage and help does not explain the use of "-C" option [#1791545]


author: Sumit Bose <sbose@redhat.com> - 0.8.2-8
changelog:
  - Add --use-ldaps option to adcli update as well [#1883467]
  - Cannot join a pre-staged Computer Account on AD in Custom OU using Delegated
    user [#1734764]
  - missing documentation for required AD rights for adcli join and net
    join [#1852080]
  - [RFE] Add new mode to just create an AD account to be able to connect to
    LDAP [#1854112]


author: Sumit Bose <sbose@redhat.com> - 0.8.2-10
changelog:
  - [RFE] Adcli and Realm Error Code Optimization Request [#1889386]
  - [RFE] adcli should allow to modify DONT_EXPIRE_PASSWORD attribute [#1769644]


author: Sumit Bose <sbose@redhat.com> - 0.8.2-12
changelog:
  - [RFE] Allow adcli to create AD user with password as well as set or reset
    existing user password [#1952828]
  - [RFE] add option to populate "managed by" computer attribute [#1690920]


author: Tomáš Mráz <tmraz@redhat.com> - 3.1.20-7
changelog:
  - the ownership of the spool directory should be root as at is configured
    with daemon username root
  - document the -n option


author: Jakub Martisko <jamartis@redhat.com> - 3.10.3-1
changelog:
  - Update to new 3.10.3 stable version.
  - Remove ppc64/ppc64le related patches.
  - All packages now use -A option to specify the target CPU/Architecture instead of 
  sed substitutions and auto detection. The packages should now be less dependant on the 
  builder machine used.
  - Base package for each architecture should now be configured to be compatible with the 
  most basic machine of given type.
  - In addittion to base package, added some optimized packages for more advanced CPUs for
  most architectures.
  - Dropped sse2/sse3 subpackages for ix86


author: Jakub Martisko <jamartis@redhat.com> - 3.10.3-6
changelog:
  * Pass all required compiler/linker flags
  - use annobin plugin
  - generate assembler build notes
  Related: #1624098


author: Jakub Martisko <jamartis@redhat.com> - 3.10.3-8
changelog:
  * Update the s390 subpackages:
  - The base pakcage is now optimized to z13
  - New subpackage is introduced: z14
  - All remaining subpackages for s390 are being deprecated
  - Clean up of the spec file 
  - Some commented out subpackages were removed form the spec
  - These subpackages were not built/shipped -> no change from the users point of view
  Resolves: #1782560
  Resolves: #1780286
  Resolves: #1782561


author: Kamil Dudka <kdudka@redhat.com> 2.4.47-19
changelog:
  - fix test-suite failure with perl-5.26.0 (#1473853)
  - apply patches automatically to ease maintenance
  - update URL of the upstream source tarball


author: Sergio Correia <scorreia@redhat.com> - 3.0.5-1
changelog:
  - Rebase audit package on 8.6
    Resolves: rhbz#1939406
    Resolves: rhbz#1906065
    Resolves: rhbz#1921447
    Resolves: rhbz#1927884
    Resolves: rhbz#1921658


author: Sergio Correia <scorreia@redhat.com> - 3.0.7-2
changelog:
  - Adjust sample-rules dir permissions
    Resolves: rhbz#2054727 - /usr/share/audit/sample-rules is no longer readable by non-root users


author: Sergio Correia <scorreia@redhat.com> - 3.0.7-3
changelog:
  - Fix path normalization in auparse
    Resolves: rhbz#2062612 - auparse missing information when used with --format-text


author: Sergio Correia <scorreia@redhat.com> - 3.0.7-4
changelog:
  - Drop ProtectHome from auditd.service as it interferes with rules
    Resolves: rhbz#2071727 - Default systemd service config blocks audit watch rules in some directories


author: Radovan Sroka <rsroka@redhat.com> - 3.0.7-5
changelog:
  - Introduce new fanotify record fields
    Resolves: rhbz#2216668
  - invalid use of flexible array member
    Resolves: rhbz#2116867


author: Zhao Hang <wb-zh951434@alibaba-inc.com> - 3.1.2-1.0.1
changelog:
  - Add doc sub package (Bo Ren)
  - cherry-pick `add sw patch #63160b250a36d3a0326470e2814e9ad8d6b45589` (nijie@wxiat.com)


author: Richard W.M. Jones <rjones@redhat.com> - 1.13.0-2
changelog:
  - Parse auto_reset_crashkernel in kdump
    resolves: rhbz#2042772
  - Add new directives and options for chrony


author: Richard W.M. Jones <rjones@redhat.com> - 1.13.0-4
changelog:
  - Fix parsing of /usr/lib/tmpfiles.d/provision.conf
  - Fix parsing of /etc/kernel/cmdline
    resolves: rhbz#2155136, rhbz#2159282


author: Pavel Březina <pbrezina@redhat.com> - 1.1-1
changelog:
  - Rebase to authselect-1.1 (RHBZ #1685516)
  - Notify that oddjob-mkhomedir needs to be enabled manually (RHBZ #1694103)
  - Ask for smartcard insertion when smartcard authentication is required (RHBZ #1674397)
  - Update translations (RHBZ #1689973)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.1-1
changelog:
  - Rebase to authselect-1.2.1 (RHBZ #1810471)
  - CLI commands are now correctly translated (RHBZ #1816009)
  - Remove unsupported features from sssd profile description (RHBZ #1830251)
  - add `with-files-access-provider` to sssd profile (RHBZ #1734094)
  - switch to pam_usertype module (RHBZ #1773567)
  - fix typo in sssd profile description (RHBZ #1787638)
  - add minimal profile (RHBZ #1654018)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.2-2
changelog:
  - try_first_pass option no longer works on some PAM modules in RHEL8 (RHBZ #1949070)
  - Need to localize the description of --debug option in authselect show (RHBZ #1970408)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.5-1
changelog:
  - Rebase to 1.2.5 (RHBZ #2080238)
  - sssd profile with-smartcard no longer prevents local users from accessing cron (RHBZ #2070325)
  - backup-restore now works correctly (RHBZ #2066535)
  - add with-subid to sssd profile (RHBZ #2063750)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.6-1
changelog:
  - Rebase to 1.2.6 (RHBZ #2142805)
  - Update translations (RHBZ #2139696)
  - Change password hashing algorithm from yescrypt back to sha512 (RHBZ #2151140)


author: Pavel Březina <pbrezina@redhat.com> - 1.2.6-2
changelog:
  - Fix Japanese translations (RHBZ #2216755)
  - Update translations (RHBZ #2189557)
  - Do not prompt for password twice when changing password of local user (RHBZ #2179607)


author: Ian Kent <ikent@redhat.com> - 5.1.4-106
changelog:
  - bz2214444 - The sss lookup modules handles error return incorrectly
    in some cases
    - fix some sss error return cases.
  - Resolves: rhbz#2214444


author: Ian Kent <ikent@redhat.com> - 5.1.4-107
changelog:
  - bz2216877 - When looking up included maps, sometimes autofs does not
    consult all the included files in order
    - fix incorrect matching of cached wildcard key
  - Resolves: rhbz#2216877


author: Ian Kent <ikent@redhat.com> - 5.1.4-108
changelog:
  - bz2216877 - When looking up included maps, sometimes autofs does not
    consult all the included files in order
    - fix the "fix incorrect matching of cached wildcard key" patch.
  - Related: rhbz#2216877


author: Ian Kent <ikent@redhat.com> - 5.1.4-109
changelog:
  - bz2213267 - filesystems mount and expire immediately
    - fix expire retry looping.
  - Resolves: rhbz#2213267


author: Ian Kent <ikent@redhat.com> - 5.1.4-110
changelog:
  - bz2232402 - autofs attempts to mount nonexistant ".hidden" filesystems
    - allow -null map in indirect maps.
  - Resolves: rhbz#2232402


author: Ian Kent <ikent@redhat.com> - 5.1.4-111
changelog:
  - RHEL-12369 - autofs attempts to mount nonexistant ".hidden" filesystems
    - update patch "allow -null map in indirect maps".
  - Resolves: RHEL-12369


author: Ian Kent <ikent@redhat.com> - 5.1.4-112
changelog:
  - RHEL-7997 - multi mount detection fails for share with blank+dash
    causing SEGV crash
    -fix multi-mount check.
  -Resolves: RHEL-7997


author: Ian Kent <ikent@redhat.com> - 5.1.4-113
changelog:
  - RHEL-18035 - SIGSEGV using hierarchical map entries on reload with
    autofs-5.1.4-109
    - fix get parent multi-mount check in try_remount().
    - fix deadlock in remount.
  - Resolves: RHEL-18035


author: Ian Kent <ikent@redhat.com> - 5.1.4-114
changelog:
  - RHEL-61670 - sporadic autofs daemon segfaults
    - fix submount shutdown race.
  - RHEL-52402 - Sporadic mount failures with amd program maps on RHEL8
    - fix amd external mount error handling.
    - fix amd external mount mount handling.
    - don't free ext mount if mounted.
    - refactor amd function do_program_mount().
    - refactor umount_amd_ext_mount().
    - add flags argument to amd do_program_mount().
  - Resolves: RHEL-61670 RHEL-52402


author: Ian Kent <ian.kent@pobox.com>
changelog:
  - Add patch to implement directory ghosting and direct mounts
  - Add patch to for autofs4 module to support ghosting


author: Ian Kent <raven@themaw.net>
changelog:
  - Cleaned up an restructured my added code
  - Corrected ghosting problem with 2.4.19 and above
  - Added autofs4 ghosting patch for 2.4.19 and above
  - Implemented HUP signal to force update of ghosted maps


author: Ian Kent <raven@themaw.net>
changelog:
  - Implemented LDAP direct map handling for nisMap and automountMap schema
  - Fixed autofs4 ghosting patch for 2.4.19 and above (again)
  - Added locking to fix overlapping internal calls to (u)mount 
  - Added wait for mtab~ to improve tolerance of overlapping external calls to (u)mount
  - Fixed ghosted directory removal after failed mount attempt


author: Ian Kent <raven@themaw.net>
changelog:
  - Fixed autofs4 ghosting patch for 2.4.19 and above (again)
  - Fixed autofs directory removal on failure of autofs mount
  - Fixed lock file wait function overlapping calls to (u)mount


author: Ian Kent <raven@themaw.net>
changelog:
  - Removed ineffective lock stuff
  - Added -n to bind mount to prevent mtab update error
  - Added retry to autofs umount to clean matb after fail
  - Redirected messages from above to debug log and added info message
  - Fixed autofs4 module reentrancy, pwd and chroot handling


author: Ian Kent <raven@themaw.net>
changelog:
  - Checked and merged most of the RedHat v3 patches
  - Fixed kernel module handling wu-ftpd login problem (again)


author: Jeff Moyer <jmoyer@redhat.com> 1:4.1.0-3
changelog:
  - Ported forward Red Hat's patches from 3.1.7 that were not already present
    in 4.1.0.
  - Moving autofs from version 3.1.7 to 4.1.0


author: Jeff Moyer <jmoyer@redhat.com> 1:4.1.0-4
changelog:
  - comment out /net and /misc from the default auto.master.  /net is important
    since in a default shipping install, we can neatly co-exist with amd.


author: Jeff Moyer <jmoyer@redhat.com> 1:4.1.0-5
changelog:
  - make the init script only recognize redhat systems.  Nalin seems to remember
    some arcane build system error that can be caused if we don't do this.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.0-7
changelog:
  - Moved the freeing of ap.path to cleanup_exit, as we would otherwise 
    reference an already-freed variable.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.1-3
changelog:
  - Fix bug in get_best_mount, whereby if there is only one option, we 
    choose nothing.  This is primarily due to the fact that we pass 0 in to
    the get_best_mount function for the long timeout parameter.  So, we
    timeout trying to contact our first and only server, and never retry.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.1-5
changelog:
  - Clarify documentation on direct maps.
  - Send automount daemons a HUP signal during reload.  This tells them to 
    re-read maps (otherwise they use a cached version.  Patch from the autofs
    maintainer.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.1-6
changelog:
  - Add the /etc/sysconfig/autofs file, and supporting infrastructure in 
    the init script.
  - Add support for UNDERSCORE_TO_DOT for those who want it.
  - We no longer own /net.  Move it to the filesystem package.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.2-1
changelog:
  - Change hard-coded paths in the spec file to the %{_xxx} variety.
  - Update to upstream 4.1.2.
  - Add a STRIPDASH option to /etc/sysconfig/autofs which allows for
    compatibility with the Sun automounter options specification syntax in
    auto.master.  See /etc/sysconfig/autofs for more information.  Addresses
    bug 113950.


author: <jmoyer@redhat.com> - 1:4.1.2-2
changelog:
  - Pass --libdir= to ./configure so we get this right on 64 bit platforms that 
    support backwards compat.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.2-5
changelog:
  - Ian has a new fix for replicated server and multi-mounts.  Updated the 
    patch for testing.  Still beta.  (Ian Kent)


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.2-6
changelog:
  - The lookup_yp module only dealt with YPERR_KEY, all other errors were 
    treated as success.  As a result, if the ypdomain was not bound, the 
    subprocess that starts mounts would SIGSEGV.  This is now fixed.
  - Option parsing in the init script was not precise enough, sometimes matching
    filesystem options to one of --ghost, --timeout, --verbose, or --debug.  
    The option-parsing patch addresses this issue by making the regexp's much
    more precise.
  - Ian has rolled a third version of the replicated mount fixes.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-2
changelog:
  - Incorporate patch from Ian which fixes an infinite loop seen by those
    running older versions of the kernel patches (triggered by non-strict mounts
    being the default).


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-4
changelog:
  - Perform an icmp ping request before rpc_pings, since the rpc clnt_create
    function has a builtin default timeout of 60 seconds.  This could result
    in a long delay when a server in a replicated mount setup is down.
  - For non-replicated server entries, ping a host before attempting to mount.
    (Ian Kent)
  - Change to %configure.
  - Put version-release into .version to allow for automount --version to
    print exact info.
  - Nuke my get-best-mount patch which always uses the long timeout.  This
    should no longer be needed.
  - Put name into changelog entries to make them consistent.  Add e:n-v-r
    into Florian's entry.
  - Stop autofs before uninstalling


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-8
changelog:
  - Change icmp ping to an rpc ping.  (Ian Kent)
  - Fix i18n patch
    o Remove the extra \" from one echo line.
    o Use echo -e if we are going to do a \n in the echo string.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-10
changelog:
  - Add bad chdir patch from Ian Kent.
  - Add a typo fix for the mtab lock file.
  - Nuke the stripdash patch.  It didn't solve a problem.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-11
changelog:
  - Add beta map expiry code for wider testing. (Ian Kent)
  - Fix check for ghosting option.  I forgot to check for it in DAEMONOPTIONS.
  - Remove STRIPDASH from /etc/sysconfig/autofs


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-12
changelog:
  - Add a sysconfig entry to disable direct map support, and set this to 
    1 by default.
  - Disable the beta map expiry logic so I can build into a stable distro.
  - Add defaults for all of the sysconfig variables to the init script so 
    we don't trip over user errors (i.e. deleting /etc/sysconfig/autofs).


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-13
changelog:
  - Only read one auto.master map (instead of concatenating all found sources).
  - Uncomment Ian's experimental mount expiry patch.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-14
changelog:
  - New map expiry patch from Ian.
  - Fix a couple signal races.  No known problem reports of these, but they
    are holes, none-the-less.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-15
changelog:
  - Fix a socket leak in the rpc_subs, causing mounts to fail since we are 
    running out of port space fairly quickly.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-17
changelog:
  - Add patch to support parsing nsswitch.conf to determine map sources.
  - Disable this patch, and Ian's map expiry patch for a FC build.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-18
changelog:
  - Umount loopback filesystems under automount points when stopping the 
    automounter.
  - Uncomment the map expiry patch.
  - change a close to an fclose in lookup_file.c


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-20
changelog:
  - Merged my and Ian's socket leak fixes into one, smaller patch. Only
    partially addresses bz #128966.
  - Fix some more echo lines for internationalization. bz #77820
  - Revert the only one auto.master patch until we implement the +auto_master
    syntax.  Temporarily addresses bz #133055.


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-27
changelog:
  - Fixed an error in the init script which caused duplicate entries to be
    displayed when asking for autofs status.


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-29
changelog:
  - Fixed a problem with backwards compatability. Specifying local
    maps without '/etc/' prepended to them now works. (bz #136038)


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-32
changelog:
  - Fixed the use of +ypmapname so the maps included with +ypmapname
    are used in the correct order.  (In the past the '+' entries
    were always processed after local entries.)


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-34
changelog:
  - Added a patch to fix the automounter failing on ldap maps
    when it couldn't get the whole map.  (ie. when the search
    limit was lower than the number of results)


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-55
changelog:
  - Fix program maps so that they can have gt 4k characters. (Neil Horman)
    Addresses bz #138994.
  - Add a space after the colon here "Starting automounter:" in init script.
    Fixes bz #138513.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-57
changelog:
  - Pass a socket into clntudp_bufcreate so that we don't use up additional 
    reserved ports.  This patch, along with the socket leak fix, addresses
    bz #128966.


author: <jmoyer@redhat.com> - 1:4.1.3-74
changelog:
  - Add in the map expiry patch
  - Bring in other patches that have been committed to other branches. This 
    version should now contain all fixes we have to date
  - Merge conflicts due to map expiry changes


author: Chris Feist <cfeist@redhat.com> - 1:4.3-80
changelog:
  - Added a variable to determine if we created the directory or not
    so we don't accidently remove a directory that we didn't create when
    we stop autofs.  (bz #134399)


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-90
changelog:
  - Fix potential double free in cache_release.  This bug showed up in a
    multi-map setup.  Two calls to cache_release would result in a SIGSEGV,
    and the automount process would never exit.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-98
changelog:
  - Program maps can repeat the last character of output.  Fix this.  
    Addresses bz #138606
  - Return first entry when there are duplicate keys in a map.  Addresses
    bz #140108.
  - Propagate custom map variables to submounts.  Fixes bz #143074.
  - Create a sysconfig variable to control whether we source only one master
    map (the way sun does), or source all maps found (which is the default for
    backwards compatibility).  Addresses bz #143126.
  - Revised version of the get_best_mount patch. (#146887) cfeist@redhat.com
    The previous patch introduced a regression.  Non-replicated mounts would
    not have the white space stripped from the entry and the mount would fail.
  - Handle comment characters in the middle of the automount line in
    /etc/nsswitch.conf.  Addresses bz #127457.


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-100
changelog:
  - When using ldap if auto.master doesn't exist we now check for auto_master.
    Addresses bz #130079
  - When using an auto.smb map we now remove the leading ':' from the path which
    caused mount to fail in the past.  Addresses bz #147492
  - Autofs now checks /etc/nsswitch.conf to determine in what order files & nis
    are checked when looking up autofs submount maps which don't specify a
    maptype.  Addresses IT #57612.


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-111
changelog:
  - Fixed one off bug in the submount-variable-propagation patch.
    (bz #143074)
  - Fixed a bug in the init script which wouldn't find the -browse
    option if it was preceded by another option. (fz #113494)


author: Chris Feist <cfeist@redhat.com> - 1:4.1.3-115
changelog:
  - Fixed regression causing any entries after a wildcard in an
    indirect map to be ignored. (bz #151668).
  - Fixed regression which caused local hosts to be mount instead
    of --bind local directories. (bz #146887)


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-119
changelog:
  - Merge in the multi-over patch.  This resolves an issue whereby multimounts
    (such as those used for /net) could be processed in the wrong order,
    resulting in directories not showing up in a multimount tree.  The fix
    is to process these directories in order, shortest to longer path.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.3-123
changelog:
  - Add in an error case that was omitted in the multi-over patch.
  - Update our auto.net to reflect the changes that went into 4.1.4_beta2.
    This fixes a problem seen by at least one customer where a malformed entry
    appeared first in the multimount list, thus causing the entire multimount
    to be ignored.  This new auto.net places that entry at the end, purely by
    luck, but it fixes the problem in this one case.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-4
changelog:
  - Finish up with the merge breakage.
  - Temporary fix for the multimount detection code.  It seems half-baked.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-6
changelog:
  - Fix a race between mounting a share and updating the cache in the parent
    process.  If the mount completed first, the parent would not expire the
    stale entry, leaving it first on the list.  This causes map updates to not
    be recognized (well, worse, they are recognized after the first expire, but
    not subsequent ones).  Fixes a regression, bug #137026 (rhel3 bug).


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-7
changelog:
  - I reversed the checking for multimount entries, breaking those configs!
    This update puts the code back the way it was before I broke it.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-8
changelog:
  - Add in the deferred syslog patch.  This fixes a hung automounter issue
    related to unsafe calls to syslog in signal handler context.


author: <jmoyer@redhat.com> - 1:4.1.4-10
changelog:
  - Fix some bugs in the parser
  - allow -net instead of /etc/auto.net
  - Fix a buffer overflow with large key lengths
  - Don't allow autofs to unlink files, only to remove directories
  - change to the upstream reentrant syslog patch from the band-aid deferred
    syslog patch.
  - Get rid of the init script patch that hard-coded the release to redhat.
    This should be handled properly by all red hat distros.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-12
changelog:
  - The sort command no longer accepts options of the form "+0".  This broke
    auto.net, so the option was removed.  Fixes bz #172111.


author: Jeff Moyer <jmoyer@redhat.com> - 1:4.1.4-14
changelog:
  - Removed the /misc entry from the default auto.master.  auto.misc has
    an entry for the cdrom device, and the preferred method of mounting the
    cd is via udev/hal.


author: Ian Kent <ikent@redhat.com> - 1:4.1.4-16
changelog:
  - Replace check-is-multi with more general multi-parse-fix.
  - Add fix for premature return when waiting for lock file.
  - Update copyright declaration for reentrant-syslog source.
  - Add patch for configure option to disable locking during mount.
    But don't disable locking by default.
  - Add ability to handle automount schema used in Sun directory server.
  - Quell compiler warning about getsockopt parameter.
  - Quell compiler warning about yp_order parameter.


author: Ian Kent <ikent@redhat.com> - 1:4.1.4-18
changelog:
  - Add patch to allow customization of arguments to the
    autofs-ldap-auto-master program (bz #187525).
  - Add patch to escap "#" characters in exports from auto.net
    program mount (bz#178304).


author: Ian Kent <ikent@redhat.com> - 1:4.1.4-20
changelog:
  - add patch to use "cifs" instead of smbfs and escape speces
    in share names (bz #163999, #187732).


author: Ian Kent <ikent@redhat.com> - 1:4.1.4-23
changelog:
  - add patch to ignore the "bg" and "fg" mount options as they
    aren't relevant for autofs mounts (bz #184386).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta3-1
changelog:
  - update source to version 5.0.0_beta3.
  - add patch to remove extra debug print.
  - add patch to
    - fix memory alloc error in nis lookup module.
    - add "_" to "." mapname translation to nis lookup module.
  - add patch to add owner pid to mount list struct.
  - add patch to disable NFSv4 when probing hosts (at least foe now).
  - add patch to fix white space handling in replicated server selection code.
  - add patch to prevent striping of debug info macro patch (Jeff Moyer).
  - add patch to add sanity checks on rmdir_path and unlink (Jeff Moyer).
  - add patch to fix e2fsck error code check (Jeff Moyer).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta3-3
changelog:
  - update hesiod module (Jeff Moyer).
    - add mutex to protect against overlapping mount requests.
    - update return from mount request to give more sensible NSS_*
      values.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta3-6
changelog:
  - add back test for nested mount in program map lookup.
    - I must have commented this out for a reason. I guess we'll
      find out soon enough.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-2
changelog:
  - re-instate v4 directory cleanup (bz# 193832 again).
  - backout master map lookup changes made to beta3.
  - change default master map from /etc/auto.master to auto.master
    so that we always use nsswitch to locate master map.
  - change default installed master map to include "+auto.master"
    to pickup NIS master map (all bz# 193831 again).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-4
changelog:
  - check base of offset mount tree is not a mount before umounting
    its offsets.
  - fix replicated mount parse for case where last name in list
    fails lookup.
  - correct indirect mount expire broken by the wildcard lookup fix.
  - fix up multi-mount handling when wildcard map entry present.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-6
changelog:
  - add free for working var in get_default_logging.
  - add inialisation for kver in autofs_point struct.
  - fix sources list corruption in check_update_map_sources.
  - fix memory leak in walk_tree.
  - fix memory leak in rpc_portmap_getport and rpc_ping_proto.
  - fix memory leak in initialisation of lookup modules.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-8
changelog:
  - fix handling of master map entry update (bz # 193718).
  - fix program map handling of invalid multi-mount offsets.


author: Jeff Moyer <jmoyer@redhat.com> - 5.0.0_beta4-12
changelog:
  - Change BuildPrereq to BuildRequires as per the package guidelines.
  - Add libxml2-devel to the BuildRequires, as it is needed for the LDAP
    authentication bits.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta4-13
changelog:
  - Change LDAP message severity from crit to degug (bz# 183893).
  - Corrections to INSTALL and README.v5.release.
  - Add patch to fix segv on overlength map keys in file maps (Jeff Moter).
  - Add patch to restrict scanning of /proc to pid directories only (Jeff Moyer).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta5-3
changelog:
  - lookup_init cleanup and fix missed memory leak.
  - use nis map order to check if update is needed.
  - fix couple of memory leaks in lookup_yp.c.
  - fix pasre error in replicated server module.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta5-4
changelog:
  - correct spelling error in default config.
  - fix default auth config not being installed.
  - change LDAP query method as my test db was incorrect.
  - change ldap defaults code to handle missing auth config.
  - fix mistake in parsing old style LDAP specs.
  - update LDAP so that new query method also works for old syntax.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta5-5
changelog:
  - allow global macro defines to override system macros.
  - correct spelling error in default config files missed by
    previous update.
  - misc correctness and a memory leak fix.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta6-1
changelog:
  - consolidate to beta6, including:
    - mode change update for config file.
    - correction to get_query_dn fix from beta5-4.


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta6-2
changelog:
  - merge LDAP authentication update for GSSAPI (Jeff Moyer).
  - update default auth config to add options documenetation (Jeff Moyer).
  - workaround segfaults at exit after using GSSAPI library.
  - fix not checking return in init_ldap_connection (jeff Moyer).


author: Ian Kent <ikent@redhat.com> - 5.0.0_beta6-7
changelog:
  - correct directory cleanup in mount modules.
  - merge key and wildcard LDAP query for lookups (bz 197746).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.6
changelog:
  - cthon more parser corrections and attempt to fix multi-mounts
    with various combinations of submounts (still not right).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.14
changelog:
  - remove SIGCHLD handler because it is no longer needed and was
    causing expire problems.
  - alter expire locking of multi-mounts to lock sub-tree instead of
    entire tree.
  - review verbose message feedback and update.
  - correction for expire of multi-mounts.
  - spelling corrections to release notes (Jeff Moyer).
  - add back sloppy mount option, removed for Connectathon testing.
  - disable mtab locking again.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.15
changelog:
  - expire individual submounts.
  - add ino_index locking.
  - fix nested submount expiring away when pwd is base of submount.
  - more expire re-work to cope better with shutdown following cthon tests.
  - allow hostname to start with numeric when validating.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.16
changelog:
  - fix included map lookup.
  - fix directory cleanup on expire.
  - fix task cancelation at shutdown.
  - fix included map wild card key lookup.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc1.17
changelog:
  - fix task cancelation at shutdown (more)
  - fix concurrent mount and expire race with nested submounts.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.1
changelog:
  - consolidate to rc2.
  - fix colon escape handling.
  - fix recusively referenced bind automounts.
  - update kernel patches.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.5
changelog:
  - fix LDAP lookup delete cache entry only if entry doesn't exist.
  - add missing socket close in replicated host check (Jeff Moyer).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.7
changelog:
  - make default installed master map for /net use "-hosts" instead
    of auto.net.
  - fix included map recursive map key lookup.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.10
changelog:
  - fix get_query_dn not looking in subtree for LDAP search.
  - allow syntax "--timeout <secs>" for backward compatibility
    (bz 193948).
  - make masked_match independent of hostname for exports comparison
    (bz 209638).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.11
changelog:
  - fix file handle leak in nsswitch parser (bz 207678).
  - fix memory leak in mount and expire request processing (bz 207678).
  - add additional check to prevent running of cancelled tasks.
  - fix potential file handle leakage in rpc_subs.c for some failure
    cases (bz 207678).
  - fix file handle leak in included map lookup (bz 207678).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.12
changelog:
  - fix "-fstype=nfs4" server probing (part 2 of bz 208757).
  - set close-on-exec flag on open files where possible (bz 207678).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.16
changelog:
  - fix get_query_dn not looking in subtree for LDAP search (missed
    econd occurance).
  - allow additional common LDAP attributes in map dn.
  - Resolves: rhbz#205997


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.20
changelog:
  - Update patch for changed semantics of mkdir in recent kernels.
  - fix macro table locking (bz 208091).
  - fix nsswitch parser locking (bz 208091).
  - allow only one master map read task at a time.
  - fix misc memory leaks.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.21
changelog:
  - mitigate manual umount of automounts where possible.
  - fix multiply recursive bind mounts.
  - check kernel module version and require 5.00 or above.
  - fix expire regression introduced in the "mitigate manual umount" patch.
  - still more on multiply recursive bind mounts.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.23
changelog:
  - fix tokenizer to distinguish between global option and dn string (bz 214684).
  - fix incorrect return from spawn.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.26
changelog:
  - fix parsing of bad mount mount point in master map (bz 215620).
  - fix use after free memory access in cache.c and lookup_yp.c (bz 208091).
  - eliminate use of pthread_kill to detect task completion (bz 208091).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.29
changelog:
  - alter nfs4 host probing to not use portmap lookup and add options
    check for "port=" parameter (bz 208757).
  - correct semantics of "-null" map handling (bzs 214800, 208091).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.33
changelog:
  - expand export access checks to include missing syntax options.
  - make "-hosts" module try to be sensitive to exports list changes.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.34
changelog:
  - change mount "device" from "automount" to the map name.
  - check for buffer overflow in mount_afs.c.
  - replace tempnam with mkdtemp.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.38
changelog:
  - update master map tokenizer to admit "slasify-colons" option.
  - update location validation to accept "_" (bz 219445).
  - set close-on-exec flag on open sockets (bz 215757).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc2.41
changelog:
  - fix nonstrict multi-mount handling (bz 219383).
  - correct detection of duplicate indirect mount entries (bz 220799).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.5
changelog:
  - remove fullstop from Summary tag.
  - change Buildroot to recommended form.
  - replace Prereq with Requires.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.13
changelog:
  - make double quote handing consistent (at least as much as we can).
  - fix handling of trailing white space in wildcard lookup (forward port bz 199720).
  - check fqdn of each interface when matching export access list (bz 213700).


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.17
changelog:
  - make use of spaces and tabs in spec file consistent.
  - escape embedded macro text in %changelog.
  - eliminate redundant %version and %release.
  - remove redundant conditional check from %clean.
  - remove redundant exit from %preun.
  - correct %defattr spec.
  - remove empty %doc and redundant %dir misc lines.
  - combine program module spec lines into simpler one line form.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.18
changelog:
  - update the "task done race" patch to fix a deadlock.
  - added URL tag.
  - removed obsoletes autofs-ldap.
  - replaced init directory paths with %{_initrddir} macro.


author: Ian Kent <ikent@redhat.com> - 5.0.1-0.rc3.24
changelog:
  - add "condrestart" to init script (bz 228860).
  - add "@network" and .domain.name export check.
  - fix display map name in mount entry for "-hosts" map.


author: Ian Kent <ikent@redhat.com> - 5.0.1-1
changelog:
  - update to release tar.
  - fix return check for getpwuid_r and getgrgid_r.
  - patch to give up trying to update exports list while host is mounted.
  - fix to "@network" matching. 
  - patch to check for fstab update and retry if not updated.


author: Ian Kent <ikent@redhat.com> - 5.0.1-5
changelog:
  - drop "DEFAULT_" prefix from configuration names.
  - add option to select replicated server at random (instead of
    ping response time) (bz 227604).
  - fix incorrect cast in directory cleanup routines (bz 231864).


author: Ian Kent <ikent@redhat.com> - 5.0.1-6
changelog:
  - fix directory creation for browse mounts.
  - fix wildcard map handling and improve nsswitch source map update.


author: Ian Kent <ikent@redhat.com> - 5.0.1-8
changelog:
  - add configuration variable to control appending of global options (bz 214684).
  - add command option to set a global mount options string (bz 214684).


author: Ian Kent <ikent@redhat.com> - 5.0.1-9
changelog:
  - upstream fix for filesystem is local check.
  - disable exports access control check (bz 203277).
  - fix patch to add command option for set a global mount options (bz 214684).


author: Ian Kent <ikent@redhat.com> - 5.0.1-16
changelog:
  - add ldaps support.
    - note: it's no longer possible to have multiple hosts in an ldap map spec.
    - note: to do this you need to rely on the ldap client config.


author: Ian Kent <ikent@redhat.com> - 5.0.2-2
changelog:
  - include krb5.h in lookup_ldap.h (some openssl doesn't implicitly include it).
  - correct initialization of local var in parse_server_string.


author: Ian Kent <ikent@redhat.com> - 5.0.2-5
changelog:
  - fix mount point directory creation for bind mounts.
  - add quoting for exports gathered by hosts map.


author: Ian Kent <ikent@redhat.com> - 5.0.2-10
changelog:
  - mark map instances stale so they aren't "cleaned" during updates.
  - fix large file compile time option.


author: Ian Kent <ikent@redhat.com> - 5.0.2-11
changelog:
  - don't fail on empty master map.
  - add support for the "%" hack for case insensitive attribute schemas.


author: Ian Kent <ikent@redhat.com> - 5.0.2-14
changelog:
  - update patch to prevent failure on empty master map.
  - if there's no "automount" entry in nsswitch.conf use "files" source.
  - add LDAP schema discovery if no schema is configured.


author: Ian Kent <ikent@redhat.com> - 5.0.2-16
changelog:
  - add descriptive comments to config about LDAP schema discovery.
  - work around segfault at exit caused by libxml2.
  - fix foreground logging (also fixes shutdown needing extra signal bug).


author: Ian Kent <ikent@redhat.com> - 5.0.2-18
changelog:
  - fix schema selection in LDAP schema discovery.
  - check for "*" when looking up wildcard in LDAP.
  - fix couple of edge case parse fails of timeout option.
  - add SEARCH_BASE configuration option.
  - add random selection as a master map entry option.
  - re-read config on HUP signal.
  - add LDAP_URI, LDAP_TIMEOUT and LDAP_NETWORK_TIMEOUT configuration options.
  - fix deadlock in submount mount module.
  - fix lack of ferror() checking when reading files.
  - fix typo in autofs(5) man page.
  - fix map entry expansion when undefined macro is present.
  - remove unused export validation code.
  - add dynamic logging (adapted from v4 patch from Jeff Moyer).
  - fix recursive loopback mounts (Matthias Koenig).
  - add map re-load to verbose logging.
  - fix handling of LDAP base dns with spaces.
  - handle MTAB_NOTUPDATED status return from mount.
  - when default master map, auto.master, is used also check for auto_master.
  - update negative mount timeout handling.
  - fix large group handling (Ryan Thomas).
  - fix for dynamic logging breaking non-sasl build (Guillaume Rousse).
  - eliminate NULL proc ping for singleton host or local mounts.


author: Ian Kent <ikent@redhat.com> - 5.0.2-21
changelog:
  - Bug 421371: CVE-2007-5964 autofs defaults don't restrict suid in /net [rawhide]
    - use mount option "nosuid" for "-hosts" map unless "suid" is explicily specified.


author: Ian Kent <ikent@redhat.com> - 5.0.2-23
changelog:
  - Bug 397591 SELinux is preventing /sbin/rpc.statd (rpcd_t) "search" to <Unknown> (sysctl_fs_t).
    - prevent fork between fd open and setting of FD_CLOEXEC.


author: Ian Kent <ikent@redhat.com> - 5.0.2-25
changelog:
  - Bug 426401: CVE-2007-6285 autofs default doesn't set nodev in /net [rawhide]
    - use mount option "nodev" for "-hosts" map unless "dev" is explicily specified.


author: Ian Kent <ikent@redhat.com> - 5.0.3-3
changelog:
  - catch "-xfn" map type and issue "no supported" message.
  - another correction for handling of LDAP base dns with spaces.


author: Ian Kent <ikent@redhat.com> - 5.0.3-4
changelog:
  - correction to the correction for handling of LDAP base dns with spaces.
  - avoid using UDP for probing NFSv4 mount requests.
  - use libldap instead of libldap_r.


author: Ian Kent <ikent@redhat.com> - 5.0.3-6
changelog:
  - fix expire calling kernel more often than needed.
  - fix unlink of mount tree incorrectly causing autofs mount fail.
  - add miscellaneous device node interface library.
  - use miscellaneous device node, if available, for active restart.
  - device node and active restart fixes.
  - update is_mounted to use device node ioctl, if available.


author: Ian Kent <ikent@redhat.com> - 5.0.3-8
changelog:
  - revert miscellaneous device node related patches.
  - add missing check for zero length NIS key.
  - fix incorrect match of map type name when included in map name.
  - update rev 7 sasl callbacks patch.


author: Ian Kent <ikent@redhat.com> - 5.0.3-18
changelog:
  - don't abuse the ap->ghost field on NFS mount.
  - multi-map doesn't pickup NIS updates automatically.
  - eliminate redundant DNS name lookups.
  - mount thread create condition handling fix.
  - allow directory create on NFS root.
  - check direct mount path length.
  - fix incorrect in check in get user info.
  - fix a couple of memory leaks.


author: Ian Kent <ikent@redhat.com> - 5.0.3-21
changelog:
  - add upstream bug fix patches
    - add command line option to override is running check.
    - don't use proc fs for is running check.
    - fix fail on included browse map not found.
    - fix incorrect multi source messages.
    - clear stale flag on map read.
    - fix proximity other rpc ping timeout.
    - refactor mount request vars code.
    - make handle_mounts startup condition distinct.
    - fix submount shutdown handling.
    - try not to block on expire.
    - add configuration paramter UMOUNT_WAIT.
    - fix multi mount race.
    - fix nfs4 colon escape handling.
    - check replicated list after probe.
    - add replicated server selection debug logging.
    - update replicated server selection documentation.
    - use /dev/urandom instead of /dev/random.
    - check for mtab pointing to /proc/mounts.
    - fix interface config buffer size.
    - fix percent hack heap corruption.


author: Ian Kent <ikent@redhat.com> - 5.0.3-23
changelog:
  - add upstream bug fixes
    - bug fix for mtab check.
    - bug fix for zero length nis key.
    - update for ifc buffer handling.
    - bug fix for kernel automount handling.
  - warning: I found a bunch of patches that were present but not
    being applied.


author: Ian Kent <ikent@redhat.com> - 5.0.3-25
changelog:
  - fix fd leak at multi-mount non-fatal mount fail.
  - fix incorrect multi-mount mountpoint calcualtion.


author: Ian Kent <ikent@redhat.com> - 5.0.3-26
changelog:
  - add map-type-in-map-name fix patch to sync with upstream and RHEL.
  - don't readmap on HUP for new mount.
  - add NIS_PARTIAL to map entry not found check and fix use after free bug.


author: Ian Kent <ikent@redhat.com> - 5.0.3-28
changelog:
  - don't close file handle for rootless direct mounti-mount at mount.
  - wait submount expire thread completion when expire successful.
  - add inadvertantly ommitted server list locking in LDAP module.


author: Ian Kent <kent@redhat.com> - 5.0.3-30
changelog:
  - fix segv during library re-open.
  - fix incorrect pthreads condition handling for expire requests.
  - fix master map lexer eval order.
  - fix bad alloca usage.


author: Ian Kent <kent@redhat.com> - 5.0.4-5
changelog:
  - fix negative caching of non-existent keys.
  - fix ldap library detection in configure.
  - use CLOEXEC flag functionality if present.
  - fix select(2) fd limit.
  - make hash table scale to thousands of entries.


author: Ian Kent <ikent@redhat.com> - 5.0.4-8
changelog:
  - rename program map parsing bug fix patch.
  - use CLOEXEC flag functionality for setmntent also, if present.


author: Ian Kent <ikent@redhat.com> - 5.0.4-9
changelog:
  - fix hosts map use after free.
  - fix uri list locking (again).
  - check for stale SASL credentials upon connect fail.
  - add "forcestart" and "forcerestart" init script options to allow
    use of 5.0.3 strartup behavior if required.
  - always read entire file map into cache to speed lookups.
  - make MAX_ERR_BUF and PARSE_MAX_BUF use easier to audit.
  - make some easy alloca replacements.
  - update to configure libtirpc if present.
  - update to provide ipv6 name and address support.
  - update to provide ipv6 address parsing.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-15
changelog:
  - fix array out of bounds accesses and cleanup couple of other alloca() calls.
  - Undo mistake in copy order for submount path introduced by rev 11 patch.
  - add check for alternate libxml2 library for libxml2 tsd workaround.
  - add check for alternate libtirpc library for libtirpc tsd workaround.
  - cleanup configure defines for libtirpc.
  - add WITH_LIBTIRPC to -V status report.
  - add libtirpc-devel to BuildRequires.
  - add nfs mount protocol default configuration option.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-21
changelog:
  - fix file map lookup when reading included or nsswitch sources.
    - a regression introduced by file map lookup optimisation in rev 9.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-26
changelog:
  - fix lsb init script header.
  - fix memory leak reading ldap master map.
  - fix st_remove_tasks() locking.
  - reset flex scanner when setting buffer.
  - zero s_magic is valid.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-28
changelog:
  - use intr option as hosts mount default.
  - sync kernel includes with upstream kernel.
  - dont umount existing direct mount on master re-read.
  - fix incorrect shutdown introduced by library relaod fixes.
  - improve manual umount recovery.
  - dont fail on ipv6 address when adding host.
  - always read file maps multi map fix.
  - always read file maps key lookup fixes.
  - add support for LDAP_URI="ldap:///<domain db>" SRV RR lookup.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-30
changelog:
  - fix incorrect dclist free.
  - srv lookup handle endianness.
  - fix bug introduced by library reload changes which causes autofs to
    not release mount thread resources when using submounts.
  - fix notify mount message path.
  - try harder to work out if we created mount point at remount.
  - fix double free in do_sasl_bind().
  - manual umount recovery fixes.
  - fix map type info parse error.


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-32
changelog:
  - fix an RPC fd leak.
  - don't block signals we expect to dump core.
  - fix pthread push order in expire_proc_direct().


author: Ian Kent <ikent@redhat.com> - 1:5.0.4-39
changelog:
  - fix libxml2 non-thread-safe calls.
  - fix direct map cache locking.
  - fix patch "dont umount existing direct mount on reread" deadlock.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-1
changelog:
  - update source to latest upstream version.
    - this is essentially a consolidation of the patches already in this rpm.
  - add dist tag to match latest RHEL-5 package tag format.


author: Ian Kent <kent@redhat.com> - 1:5.0.5-2
changelog:
  - fix included map read fail handling.
  - refactor ldap sasl authentication bind to eliminate extra connect
    causing some servers to reject the request. 
  - add mount wait parameter to allow timeout of mount requests to
    unresponsive servers.
  - special case cifs escape handling.
  - fix libxml2 workaround configure.
  - more code analysis corrections (and fix a typo in an init script).
  - fix backwards #ifndef INET6.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-6
changelog:
  - don't use master_lex_destroy() to clear parse buffer.
  - make documentation for set-log-priority clearer.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-17
changelog:
  - dont connect at ldap lookup module init.
  - fix random selection option.
  - fix disable timeout.
  - fix strdup() return value check.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-22
changelog:
  - fix get query dn failure.
  - fix ampersand escape in auto.smb.
  - add locality as valid ldap master map attribute.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-25.fc14
changelog:
  - make nfs4 default for replicated selection configuration (bz579949).
  - add simple bind authentication option (bz579951).


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-27.fc14
changelog:
  - fix master map source server unavailable handling.
  - add autofs_ldap_auth.conf man page.
  - fix random selection for host on different network.
  - make redhat init script more lsb compliant.
  - don't hold lock for simple mounts.
  - fix remount locking.
  - fix wildcard map entry match.
  - fix parse_sun() module init.
  - dont check null cache on expire.
  - fix null cache race.
  - fix cache_init() on source re-read.
  - fix mapent becomes negative during lookup.
  - check each dc server individually.
  - fix negative cache included map lookup.
  - remove state machine timed wait.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-28
changelog:
  - remove extra read master map call.
  - remove extra cache create call in master_add_map_source().
  - fix error handing in do_mount_indirect().
  - expire thread use pending mutex.
  - explicity link against the Kerberos library.
  - remove some log message duplication for verbose logging.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-32.fc15
changelog:
  - always read file maps mount lookup map read fix.
  - fix direct map not updating on reread.
  - add external bind method.
  - fix add simple bind auth.
  - add option to dump configured automount maps.
  - wait for master map to be available at start.


author: Ian Kent <ikent@redhat.com> - 1:5.0.5-36
changelog:
  - use weight only for server selection.
  - fix isspace() wild card substition.
  - auto adjust ldap page size.
  - fix prune cache valid check.
  - fix mountd vers retry.
  - fix expire race.
  - add lsb force-reload and try-restart.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-3
changelog:
  - improve mount location error reporting.
  - fix paged query more results check.
  - fix dumpmaps not reading maps.
  - fix result null check in read_one_map().
  - Fix LDAP result leaks on error paths.
  - code analysis fixes 1.
  - fix not bind mounting local filesystem.
  - update dir map-type patch for changed patch order.
  - fix wait for master source mutex.
  - fix submount shutdown race
  - fix fix map source check in file lookup.
  - add disable move mount configure option.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-5
changelog:
  - fix ipv6 name lookup check.
  - fix ipv6 rpc calls.
  - fix ipv6 configure check.
  - add piddir to configure.
  - add systemd unit support.
  - fix MNT_DETACH define.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-9
changelog:
  - add correct patch for "fix improve mount location error reporting".
  - add correct patch for "fix fix wait for master source mutex".


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-12
changelog:
  - ignore duplicate exports in auto.net.
  - add kernel verion check function.
  - add function to check mount.nfs version.
  - reinstate singleton mount probe.
  - rework error return handling in rpc code.
  - catch EHOSTUNREACH and bail out early.
  - systemd support fixes.
  - fix segmentation fault in do_remount_indirect().


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-15
changelog:
  - fix typo in libtirpc file name.
  - fix rework error return handling in rpc code.
  - allow MOUNT_WAIT to override probe.
  - improve UDP RPC timeout handling.
  - fix segfault in get_query_dn().
  - use strtok_r() in linux_version_code().
  - fix sss wildcard match.
  - fix dlopen() error handling in sss module.
  - fix configure string length tests for sss library.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-21
changelog:
  - fix fix LDAP result leaks on error paths.
  - report map not read when debug logging.
  - duplicate parent options for included maps.
  - update ->timeout() function to not return timeout.
  - move timeout to map_source.
  - fix kernel verion check of version components.
  - dont retry ldap connect if not required.
  - check if /etc/mtab is a link to /proc/self/mounts.
  - fix nfs4 contacts portmap.
  - make autofs wait longer for shutdown.
  - fix sss map age not updated.
  - fix remount deadlock.
  - fix umount recovery of busy direct mount.
  - fix offset mount point directory removal.
  - remove move mount code and configure option.
  - fix remount of multi mount.
  - fix devce ioctl alloc path check.
  - refactor hosts lookup module.
  - remove cache update from parse_mount().
  - add function to delete offset cache entry.
  - allow update of multi mount offset entries.
  - add hup signal handling to hosts map.


author: Ian Kent <ikent@redhat.com> - 1:5.0.6-21
changelog:
  - fix systemd argument passing.
  - fix get_nfs_info() can incorrectly fail.
  - fix offset directory removal.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-3
changelog:
  - fix nobind sun escaped map entries.
  - fix use cache entry after free mistake.
  - fix ipv6 proximity calculation.
  - fix parse buffer initialization.
  - fix typo in automount(8).


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-4
changelog:
  - include usage in usage message.
  - dont wait forever to restart.
  - add option description to man page.
  - fix null map entry order handling.
  - make description of default MOUNT_WAIT setting clear.
  - configure.in: allow cross compilation.
  - README: update mailing list subscription info.
  - allow non root user to check status.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-6
changelog:
  - fix recursive mount deadlock.
  - increase file map read buffer size.
  - handle new location of systemd.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-8
changelog:
  - fix map entry duplicate offset detection.
  - Allow nsswitch.conf to not contain "automount:" lines.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-10
changelog:
  - fix submount offset delete.
  - fix init script status return.
  - fix use get_proximity() without libtirpc.
  - don't use dirent d_type to filter out files in scandir().
  - don't schedule new alarms after readmap.
  - use numeric protocol ids instead of protoent structs.
  - lib/defaults.c: use WITH_LDAP conditional around LDAP types.
  - make yellow pages support optional.
  - modules/replicated.c: use sin6_addr.s6_addr32.
  - workaround missing GNU versionsort extension.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-12
changelog:
  - dont fail on master map self include.
  - fix wildcard multi map regression.
  - fix file descriptor leak when reloading the daemon.
  - depricate nosymlink pseudo option.
  - add symlink pseudo option.
  - update kernel include files.
  - fix requires in spec file.
  - fix libtirpc build option.
  - fix systemd unidir in spec file.
  - document browse option in man page.
  - fix automounter support on parisc.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-16
changelog:
  - make dump maps check for duplicate indirect mounts (bz961312).
  - document allowed map sources in auto.master(5) (bz961312).
  - add enable sloppy mount option to configure.


author: Ian Kent <ikent@redhat.com> - 1:5.0.7-20
changelog:
  - fix master map mount options matching.
  - fix master map bogus keywork match.
  - fix fix map entry duplicate offset detection.
  - add a number of fixes based on a Covarity report.


author: Ian Kent <ikent@redhat.com> - 1:5.0.8-3
changelog:
  - fix undefined authtype_requires_creds err if ldap enabled but without sasl.
  - fix master map type check.
  - fix task manager not getting signaled.


author: Ian Kent <ikent@redhat.com> - 1:5.0.8-4
changelog:
  - allow --with-systemd to take a path arg.
  - fix WITH_LIBTIRPC function name.
  - fix ipv6 libtirpc getport (bz1033918).


author: Ian Kent <ikent@redhat.com> - 1:5.0.8-5
changelog:
  - fix ipv6 link local address handling.
  - fix fix ipv6 libtirpc getport.
  - get_nfs_info() should query portmapper if port is not given.
  - fix rpc_portmap_getport() proto not set.


author: Ian Kent <ikent@redhat.com> - 1:5.1.0-0.beta1.1
changelog:
  - amd lookup update lookup ldap to handle amd keys
    - inadvertantly drop from initial series.
  - amd lookup update lookup hesiod to handle amd keys
    - inadvertantly drop from initial series.
  - fix wildcard key lookup.
  - check for non existent negative entries in lookup_ghost().


author: Ian Kent <ikent@redhat.com> - 1:5.1.0-1
changelog:
  - update to upstream release, 5.1.0.
    - fix reset flex scan buffer on init.
    - fix fix negative status being reset on map read.
    - fix out of order amd timestamp lookup.
    - fix ldap default schema config.
    - fix ldap default master map name config.
    - fix map format init in lookup_init().
    - fix incorrect max key length in defaults get_hash().
    - fix xfn sets incorrect lexer state.
    - fix old style key lookup.
    - fix expire when server not responding.
    - fix ldap_uri config update.
    - fix typo in conf_load_autofs_defaults().
    - fix hash on confg option add and delete.
    - add plus to path match pattern.
    - fix multi entry ldap option handling.
    - cleanup options in amd_parse.c.
    - allow empty value for some map options.
    - allow empty value in macro selectors.


author: Ian Kent <ikent@redhat.com> - 1:5.1.0-3
changelog:
  - fix compile error in defaults.c.
  - add serialization to sasl init.
  - dont allocate dev_ctl_ops too early.
  - fix incorrect round robin host detection.
  - fix race accessing qdn in get_query_dn().
  - fix leak in cache_push_mapent().
  - fix config entry read buffer not checked.
  - fix FILE pointer check in defaults_read_config().
  - fix memory leak in conf_amd_get_log_options().
  - fix signed comparison in inet_fill_net().
  - fix buffer size checks in get_network_proximity().
  - fix leak in get_network_proximity().
  - fix buffer size checks in merge_options().
  - check amd lex buffer len before copy.
  - add return check in ldap check_map_indirect().
  - check host macro is set before use.
  - check options length before use in parse_amd.c.
  - fix some out of order evaluations in parse_amd.c.
  - fix copy and paste error in dup_defaults_entry().


author: Ian Kent <ikent@redhat.com> - 1:5.1.0-7
changelog:
  - force disable browse mode for amd format maps.
  - fix hosts map options check in lookup_amd_instance().
  - fix memory leak in create_client().
  - fix memory leak in get_exports().
  - fix memory leak in get_defaults_entry().
  - fix out of order clearing of options buffer.
  - fix reset amd lexer scan buffer.
  - ignore multiple commas in options strings.
  - fix typo in flagdir configure option.
  - clarify multiple mounts description.
  - gaurd against incorrect umount return.
  - update man page autofs(8) for systemd.
  - remove ancient kernel Requires.


author: Ian Kent <ikent@redhat.com> - 1:5.1.0-9
changelog:
  - fix custom autofs.conf not being installed.
  - init qdn before use in get_query_dn().
  - fix typo in update_hosts_mounts().
  - fix hosts map update on reload.


author: Ian Kent <ikent@redhat.com> - 1:5.1.0-10
changelog:
  - make negative cache update consistent for all lookup modules.
  - ensure negative cache isn't updated on remount.
  - dont add wildcard to negative cache.
  - make service want network-online (bz1071591).


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-5
changelog:
  - actually apply fix use after free in do_master_list_reset().
  - fix deadlock in dumpmaps.
  - fix rpcgen dependency problem.


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-6
changelog:
  - dont use array for path when not necessary.
  - fix prefix option handling in expand_entry().
  - fix sublink option not set from defaults.
  - fix error return in do_nfs_mount().


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-7
changelog:
  - add error handling for ext_mount_add().
  - account for recent libnsl changes.
  - use_hostname_for_mounts shouldn't prevent selection among replicas.
  - fix monotonic_elapse.
  - Makefiles.rules: remove 'samples' from SUBDIRS.


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-12
changelog:
  - dont allow trailing slash in master map mount points.
  - fix libresolv configure check.
  - add fedfs-getsrvinfo.c.
  - add mount.fedfs.c.
  - add fedfs-map-nfs4.c
  - add conditional inclusion of fedfs binaries.
  - add an example fedfs master map entry to the installed master map.


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-16
changelog:
  - tiny patch for autofs typo and possible bug.
  - add units After line to include statd service.
  - use systemd sd_notify() at startup.
  - add "BuildRequires: systemd-devel".
  - fix NFS version mask usage.
  - fix incorrect date in changelog.


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-17
changelog:
  - bz1577700 - automount leaves FDs in half-open state
    - fix fd leak in rpc_do_create_client().
  - Resolves: rhbz#1577700


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-18
changelog:
  - bz1593492 - Ignore trailing slashes at the end of executable maps in
    auto.master config file
    - add-man page note about extra slashes in paths
  - Resolves: rhbz#1593492


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-19
changelog:
  - bz1602447 - Please review important issues found by covscan in
    "autofs-5.1.4-18.el8+7"
    - covarity fixes.
  -Resolves: rhbz#1602447


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-20
changelog:
  - bz1612565 - Man page scan results for autofs
    - fix program usage message.
  - Resolves: rhbz#1612565


author: Ian Kent <ikent@redhat.com> - 1:5.1.4-21
changelog:
  - bz1611866 - autofs reload is unable to activate new map entries,
    it is autofs restart which shows new map entries.
    - fix update_negative_cache() map source usage.
  - bz1613621 - [autofs]Removed entries still can be accessed
    - mark removed cache entry negative.
  - Resolves: rhbz#1611866 rhbz#1613621


author: Ian Kent <ikent@redhat.com> - 5.1.4-22
changelog:
  - bz1613630 - On Red Hat 7.x systems if you try to access local
    filesystems using the automounter through /net then the shell
    and mount could lock up *if* the filesystem your accessing is
    double exported.
    - set bind mount as propagation slave.
    - add master map pseudo options for mount propagation.
  - Resolves: rhbz#1613630


author: Ian Kent <ikent@redhat.com> - 5.1.4-23
changelog:
  - bz1615782 - autofs master map age is incorrectly set
    - fix age setting at startup.
  - Resolves: rhbz#1615782


author: Ian Kent <ikent@redhat.com> - 5.1.4-24
changelog:
  - bz1621938 - autofs can no longer get maps from IPA server
    - fix use after free in parse_ldap_config().
  - Resolves: rhbz#1621938


author: Ian Kent <ikent@redhat.com> - 5.1.4-26
changelog:
  - bz1630190 - yum update hanging while restarting autofs
    - fix incorrect locking in sss lookup.
  - bz1630194 - after upgrading to autofs-5.0.7-83.el7.x86_64 on
    RHEL 7 clients, amd maps /defaults key mount options are no
    longer working
    - fix amd parser opts option handling.
  - Resolves: rhbz#1630190 rhbz#1630194


author: Ian Kent <ikent@redhat.com> - 5.1.4-27
changelog:
  - bz1638487 - Drop dependency on hesiod
    - better handle hesiod support not built in.
    - exclude hesiod support from configure options
    - remove hesiod depends.
  - Resolves: rhbz#1638487


author: Ian Kent <ikent@redhat.com> - 5.1.4-28
changelog:
  - bz1638487 - Drop dependency on hesiod
    - actually update the spec file with the hesiod removal.
  - Related: rhbz#1638487


author: Ian Kent <ikent@redhat.com> - 5.1.4-29
changelog:
  - bz1654541 - autofs crash when parsing master map
    - fix hesiod string check in master_parse().
  - Resolves: rhbz#1654541


author: Ian Kent <ikent@redhat.com> - 5.1.4-30
changelog:
  - bz1689469 - [autofs] The log no longer print PID of automount process
    - remove autofs4 module load code.
    - add NULL check in prepare_attempt_prefix().
    - update build info with systemd.
    - use flags for startup boolean options.
    - move close stdio descriptors to become_daemon().
    - add systemd service command line option.
  - Resolves: rhbz#1689469


author: Ian Kent <ikent@redhat.com> - 5.1.4-31
changelog:
  - bz1689467 - path_resolution on an autofs managed path resets the timer. Can
    this be made configurable?
    - support strictexpire mount option.
  - Resolves: rhbz#1689467


author: Ian Kent <ikent@redhat.com> - 5.1.4-32
changelog:
  - bz1703876 - [RFE] Enable additional logging information for autofs
    - add NULL check for get_addr_string() return.
    - use malloc(3) in spawn.c.
    - add mount_verbose configuration option.
    - optionally log mount requestor process info.
    - log mount call arguments if mount_verbose is set.
  - Resolves: rhbz#1703876


author: Ian Kent <ikent@redhat.com> - 5.1.4-33
changelog:
  - bz1689466 - Sanitize autofs logging
    - make expire remaining log level debug.
  - bz1685805 - autofs doesn't expand macros in amd map selectors
    - allow period following macro in selector value.
    - fix macro expansion in selector values.
  - Resolves: rhbz#1689466 rhbz#1685805


author: Ian Kent <ikent@redhat.com> - 5.1.4-34
changelog:
  - bz1681956 - autofs changes blocked until gating tests are added
    - add gating.yaml for manual gate testing.
  - Related: rhbz#1681956


author: Ian Kent <ikent@redhat.com> - 5.1.4-35
changelog:
  - bz1681956 - autofs changes blocked until gating tests are added
    - correct test name in gating.yaml.
  - Related: rhbz#1681956


author: Ian Kent <ikent@redhat.com> - 5.1.4-36
changelog:
  - bz1743442 - getmntent returns additional "-hosts" entries when
    automounter is used with "hosts" map (userspace part)
    - also use strictexpire for offsets (mounts).
    - change expire type naming to better reflect usage.
    - remove unused function has_fstab_option().
    - remove unused function reverse_mnt_list().
    - remove a couple of old debug messages.
    - fix amd entry memory leak.
    - fix unlink_mount_tree() not umounting mounts.
    - add ignore mount option.
    - use ignore option for offset mounts as well.
    - add config option for "ignore" mount option.
    - use bit flags for autofs mount types in mnt_list.
    - use mp instead of path in mnt_list entries.
    - always use PROC_MOUNTS to make mount lists.
    - add glibc getmntent_r().
    - use local getmntent_r in table_is_mounted().
    - refactor unlink_active_mounts() in direct.c.
    - don't use tree_is_mounted() for mounted checks.
    - use single unlink_umount_tree() for both direct and indirect mounts.
    - move unlink_mount_tree() to lib/mounts.c.
    - use local_getmntent_r() for unlink_mount_tree().
    - use local getmntent_r() in get_mnt_list().
    - use local getmntent_r() in tree_make_mnt_list().
    - fix missing initialization of autofs_point flags.
  - Resolves: rhbz#1743442


author: Ian Kent <ikent@redhat.com> - 5.1.4-37
changelog:
  - bz1660145 - autofs.schema doesn't work in RHEL8
    - update ldap READMEs and schema definitions.
  - Resolves: rhbz#1660145


author: Ian Kent <ikent@redhat.com> - 5.1.4-38
changelog:
  - bz1660145 - autofs.schema doesn't work in RHEL8
    - update spec file doc inclusions for schema definition update.
  - Related: rhbz#1660145


author: Ian Kent <ikent@redhat.com> - 5.1.4-39
changelog:
  - bz1802251 - Autofs will only mount share once if sss is first ini
    nsswitch.conf
    - fix a regression with map instance lookup.
  - Resolves: rhbz#1802251


author: Ian Kent <ikent@redhat.com> - 5.1.4-41
changelog:
  - bz1835547 - [RHEL8]autofs cannot mount samba/cifs shares that end with a
    dollar sign
    - fix trailing dollar sun entry expansion.
  - Resolves: rhbz#1835547


author: Ian Kent <ikent@redhat.com> - 5.1.4-42
changelog:
  - bz1841456 - automount program crashes with "malloc(): invalid next size
    (unsorted)
    - initialize struct addrinfo for getaddrinfo() calls.
    - fix quoted string length calc in expandsunent().
  -Resolves: rhbz#1841456


author: Ian Kent <ikent@redhat.com> - 5.1.4-43
changelog:
  - bz1841456 - automount program crashes with "malloc(): invalid next size
    (unsorted)
    - fix autofs mount options construction.
  -Related: rhbz#1841456


author: Ian Kent <ikent@redhat.com> - 5.1.4-44
changelog:
  - bz1858742 - autofs share doesn't mount when using nobind over RDMA where
    nfs-server and nfs-client are the same systems.
    - mount_nfs.c fix local rdma share not mounting.
  -Resolves: rhbz#1858742


author: Ian Kent <ikent@redhat.com> - 5.1.4-45
changelog:
  - bz1664561 - incorrect of start service command in autofs man page
    - fix incorrect systemctl command syntax in autofs(8).
  -Resolves: rhbz#1664561


author: Ian Kent <ikent@redhat.com> - 5.1.4-46
changelog:
  - bz1664561 - incorrect of start service command in autofs man page
    - actually apply fix patch.
  - fix dates and recent status messages in changelog.
  -Related: rhbz#1664561 rhbz#1858742


author: Ian Kent <ikent@redhat.com> - 5.1.4-47
changelog:
  - bz1887681 - automount force unlink option (-F) does not work as expected
    on autofs-5.0.7-109.el7
    - fix direct mount unlink_mount_tree() path.
    - fix unlink mounts umount order.
    - fix incorrect logical compare in unlink_mount_tree().
    - use bit flag for force unlink mounts.
    - improve force unlink mounts option description.
    - remove logpri fifo on autofs mount fail.
    - add force unlink mounts and exit option.
    - cleanup stale logpri fifo pipes on unlink and exit.
  - Resolves: rhbz#1887681


author: Ian Kent <ikent@redhat.com> - 5.1.4-48
changelog:
  - bz1892184 - autofs: return a connection failure until maps have been fetched
    - fix lookup_nss_read_master() nsswicth check return.
    - fix typo in open_sss_lib().
    - fix sss_master_map_wait timing.
    - add sss ECONREFUSED return handling.
    - use mapname in sss context for setautomntent().
    - add support for new sss autofs proto version call.
    - fix retries check in setautomntent_wait().
    - refactor sss setautomntent().
    - improve sss setautomntent() error handling.
    - refactor sss getautomntent().
    - improve sss getautomntent() error handling.
    - sss introduce calculate_retry_count() function.
    - move readall into struct master.
    - sss introduce a flag to indicate map being read.
    - update sss timeout documentation.
    - refactor sss getautomntbyname().
    - improve sss getautomntbyname() error handling.
    - use a valid timeout in lookup_prune_one_cache().
    - dont prune offset map entries.
    - simplify sss source stale check.
  - Resolves: rhbz#1892184


author: Ian Kent <ikent@redhat.com> - 5.1.4-64
changelog:
  - bz1912106 - Using -hosts option does not resolve host from /etc/hosts and mount
    failes
      - use defines for expire type.
    - remove unused function dump_master().
    - fix additional typing errors.
    - make bind mounts propagation slave by default.
    - fix browse dir not re-created on symlink expire.
      - update list.h.
    - add hashtable implementation.
    - change mountpoint to mp in struct ext_mount.
    - make external mounts independent of amd_entry.
    - make external mounts use simpler hashtable.
    - add a hash index to mnt_list.
    - use mnt_list for submounts.
    - use mnt_list for amdmounts.
    - make umount_autofs() static.
    - remove force parameter from umount_all().
    - fix remount expire.
    - fix stale offset directories disable mount.
    - use struct mnt_list to track mounted mounts.
    - use struct mnt_list mounted list for expire.
    - remove unused function tree_get_mnt_list().
    - only add expre alarm for active mounts.
    - move submount check into conditional_alarm_add().
    - move lib/master.c to daemon/master.c.
    - use master_list_empty() for list empty check.
    - add helper to construct mount point path.
      - add xdr_exports().
    - remove mount.x and rpcgen dependencies.
    - dont use realloc in host exports list processing.
    - use sprintf() when constructing hosts mapent.
    - fix mnts_remove_amdmount() uses wrong list.
    - eliminate cache_lookup_offset() usage.
    - fix is mounted check on non existent path.
    - simplify cache_get_parent().
    - set offset parent in update_offset_entry().
    - remove redundant variables from mount_autofs_offset().
    - remove unused parameter form do_mount_autofs_offset().
    - refactor umount_multi_triggers().
    - eliminate clean_stale_multi_triggers().
    - simplify mount_subtree() mount check.
    - fix mnts_get_expire_list() expire list construction.
    - fix inconsistent locking in umount_subtree_mounts().
    - fix return from umount_subtree_mounts() on offset list delete.
    - pass mapent_cache to update_offset_entry().
    - fix inconsistent locking in parse_mount().
    - remove unused mount offset list lock functions.
    - eliminate count_mounts() from expire_proc_indirect().
    - eliminate some strlen calls in offset handling.
    - don't add offset mounts to mounted mounts table.
    - reduce umount EBUSY check delay.
    - cleanup cache_delete() a little.
    - rename path to m_offset in update_offset_entry().
    - don't pass root to do_mount_autofs_offset().
    - rename tree implementation functions.
    - fix program map multi-mount lookup after mount fail.
    - add some multi-mount macros.
    - remove unused functions cache_dump_multi() and cache_dump_cache().
    - add a len field to struct autofs_point.
    - make tree implementation data independent.
    - add mapent tree implementation.
    - add tree_mapent_add_node().
    - add tree_mapent_delete_offsets().
    - add tree_mapent_traverse_subtree().
    - fix mount_fullpath().
    - add tree_mapent_cleanup_offsets().
    - add set_offset_tree_catatonic().
    - add mount and umount offsets functions.
    - switch to use tree implementation for offsets.
    - remove obsolete functions.
    - remove redundant local var from sun_mount().
    - use mount_fullpath() in one spot in parse_mount().
    - pass root length to mount_fullpath().
    - remove unused function master_submount_list_empty().
    - move amd mounts removal into lib/mounts.c.
    - check for offset with no mount location.
    - remove mounts_mutex.
  - Resolves: rhbz#1912106


author: Ian Kent <ikent@redhat.com> - 5.1.4-65
changelog:
  - bz1912106 - Using -hosts option does not resolve host from /etc/hosts and mount
    failes
    - fix unapplied patch.
    - remove unused variable from get_exports().
  - Related: rhbz#1912106


author: Ian Kent <ikent@redhat.com> - 5.1.4-66
changelog:
  - bz1912106 - Using -hosts option does not resolve host from /etc/hosts and mount
    failes
    - Coverity fixes
      - add missing free in handle_mounts().
      - remove redundant if check.
      - fix possible memory leak in master_parse().
      - fix possible memory leak in mnts_add_amdmount().
      - fix double unlock in parse_mount().
      - add length check in umount_subtree_mounts().
      - fix flags check in umount_multi().
      - dont try umount after stat() ENOENT fail.
      - remove redundant assignment in master_add_amd_mount_section_mounts().
      - fix dead code in mnts_add_mount().
      - fix arg not used in error print.
      - fix missing lock release in mount_subtree().
      - fix double free in parse_mapent().
      - refactor lookup_prune_one_cache() a bit.
      - cater for empty mounts list in mnts_get_expire_list().
      - add ext_mount_hash_mutex lock helpers.
  - Related: rhbz#1912106


author: Ian Kent <ikent@redhat.com> - 5.1.4-67
changelog:
  - bz1954430 - Please, rebuild autofs-5.1.4-66.el8
    - rebuild with fixed binutils.
  - Resolves: rhbz#1954430


author: Ian Kent <ikent@redhat.com> - 5.1.4-68
changelog:
  - bz1958487 - autofs amd mounts present in the configuration get umounted
    on reload
    - fix amd section mounts map reload.
  - bz1958485 - autofs amd type host mounts fail for certain host names
    - fix amd hosts mount expire.
  - Resolves: rhbz#1958487 rhbz#1958485


author: Ian Kent <ikent@redhat.com> - 5.1.4-69
changelog:
  - bz1961492 - autofs: regression in offset ordering
    - fix offset entries order.
    - use mapent tree root for tree_mapent_add_node().
    - eliminate redundant cache lookup in tree_mapent_add_node().
    - fix hosts map offset order.
    - fix direct mount deadlock.
  - Resolves: rhbz#1961492


author: Ian Kent <ikent@redhat.com> - 5.1.4-70
changelog:
  - bz1965862 - A recent Coverity change can cause an infinit loop on map reload
    - fix lookup_prune_one_cache() refactoring change.
  - bz1963129 - auto.master manpage doesn't mention -null or other built-in maps
    - add missing desciption of null map option.
  - Resolves: rhbz#1965862 rhbz#1963129


author: Ian Kent <ikent@redhat.com> - 5.1.4-71
changelog:
  - bz1969210 - autofs: already mounted as other than autofs or failed to unlink
    entry in tree
    - fix empty mounts list return from unlink_mount_tree().
  - Resolves: rhbz#1969210


author: Ian Kent <ikent@redhat.com> - 5.1.4-72
changelog:
  - bz1973025 - /net mount being not cleanly mounted and unmounted
    - fix nonstrict offset mount fail handling.
  - Resolves: rhbz#1973025


author: Ian Kent <ikent@redhat.com> - 5.1.4-73
changelog:
  - bz1973025 - /net mount being not cleanly mounted and unmounted
    - correct patch, fix nonstrict offset mount fail handling.
  - Related: rhbz#1973025


author: Ian Kent <ikent@redhat.com> - 5.1.4-74
changelog:
  - bz1974309 - Removal of default intr mount option while using -hosts
    and host.net
    - remove intr hosts map mount option.
    - fix previous changelog entry revision.
  - Resolves: rhbz#1974309


author: Ian Kent <ikent@redhat.com> - 5.1.4-75
changelog:
  - bz2023740 - autofs: send FAIL cmd/ioctl mess when encountering problems
    with mount trigger
    - fix kernel mount status notification.
  - Resolves: rhbz#2023740


author: Ian Kent <ikent@redhat.com> - 5.1.4-76
changelog:
  - bz2025963 - autofs service has not proper limits set to be able to handle many mounts
    - fix set open file limit.
    - improve descriptor open error reporting.
  - Resolves: rhbz#2025963


author: Ian Kent <ikent@redhat.com> - 5.1.4-77
changelog:
  - bz2025509 - Autofs auto.smb awk script fails on shares with dollar signs
    - fix double quoting in auto.smb.
    - fix double quoting of ampersand in auto.smb as well.
  - Resolves: rhbz#2025509


author: Ian Kent <ikent@redhat.com> - 5.1.4-81
changelog:
  - bz2033552 - Using -hosts option does not work after upgrading from 8.4 to 8.5
    - fix root offset error handling.
    - fix nonstrict fail handling of last offset mount.
    - dont fail on duplicate offset entry tree add.
    - fix loop under run in cache_get_offset_parent().
    - simplify cache_add() a little.
    - fix use after free in tree_mapent_delete_offset_tree().
    - fix memory leak in xdr_exports().
    - avoid calling pthread_getspecific() with NULL key_thread_attempt_id.
    - fix sysconf(3) return handling.
  - Resolves: rhbz#2033552


author: Ian Kent <ikent@redhat.com> - 5.1.4-82
changelog:
  - bz2052122 - autofs attempts unmount on directory in use
    - make umount_ent() recognise forced umount.
    - remove nonstrict parameter from tree_mapent_umount_offsets().
    - fix handling of incorrect return from umount_ent().
  - Resolves: rhbz#2052122


author: Ian Kent <ikent@redhat.com> - 5.1.4-83
changelog:
  - bz2069097 - libnss_sss: threads stuck at sss_nss_lock from initgroups
    - dont use initgroups() at spawn.
  - Resolves: rhbz#2069097


author: Ian Kent <ikent@redhat.com> - 5.1.4-84
changelog:
  - bz2130034 - automount -m crashes with Segmentation fault (core dumped)
    - fix invalid tsv access.
  - Resolves: rhbz#2130034


author: Ian Kent <ikent@redhat.com> - 5.1.4-85
changelog:
  - bz2139504 - segfault due to lookup_mod->context address being freed
    and reused while multiple threads were using it
    - fix parse module instance mutex naming.
    - serialise lookup module open and reinit.
  - Resolves: rhbz#2139504


author: Ian Kent <ikent@redhat.com> - 5.1.4-86
changelog:
  - bz2139504 - segfault due to lookup_mod->context address being freed
    and reused while multiple threads were using it
    - coverity fix for invalid access.
  - Related: rhbz#2139504


author: Ian Kent <ikent@redhat.com> - 5.1.4-87
changelog:
  - bz2139504 - segfault due to lookup_mod->context address being freed
    and reused while multiple threads were using it
    - fix hosts map deadlock on restart.
    - fix deadlock with hosts map reload.
  - Related: rhbz#2139504


author: Ian Kent <ikent@redhat.com> - 5.1.4-88
changelog:
  - bz2139504 - segfault due to lookup_mod->context address being freed
    and reused while multiple threads were using it
    - fix memory leak in update_hosts_mounts().
  - Related: rhbz#2139504


author: Ian Kent <ikent@redhat.com> - 5.1.4-89
changelog:
  - bz2149206 - RHEL9: automount does not handle null option string after
    "-" anymore
    - fix concat_options() error handling.
    - fix minus only option handling in concat_options().
  - Resolves: rhbz#2149206


author: Ian Kent <ikent@redhat.com> - 5.1.4-90
changelog:
  - bz2149206 - RHEL9: automount does not handle null option string after
    "-" anymore
    - fix changelog entry.
  - Related: rhbz#2149206


author: Ian Kent <ikent@redhat.com> - 5.1.4-91
changelog:
  - bz2148872 - autofs: errors in autofs-5.1.4-83.el8.x86_64 when restarting
    autofs with busy directories
    - fix incorrect path for is_mounted() in try_remount().
  - Resolves: rhbz#2148872


author: Ian Kent <ikent@redhat.com> - 5.1.4-92
changelog:
  - bz2161336 - Users can trigger a simple autofs DoS with wildcard automounter maps
    - fail on empty trailing replicated host name.
  - Resolves: rhbz#2161336


author: Ian Kent <ikent@redhat.com> - 5.1.4-93
changelog:
  - bz2165143 - Autofs reports can't connect to sssd, retry for 10 seconds when
    real problem is empty LDAP object
    - improve handling of ENOENT in sss setautomntent().
    - dont immediately call function when waiting.
  - Resolves: rhbz#2165143


author: Ian Kent <ikent@redhat.com> - 5.1.4-102
changelog:
  - bz2177998 - deadlock while reading amd maps
    - fix return status of mount_autofs().
    - don't close lookup at umount.
    - fix deadlock in lookups.
    - dont delay expire.
    - make amd mapent search function name clear.
    - rename statemachine() to signal_handler().
    - make signal handling consistent.
    - fix incorrect print format specifiers in get_pkt().
    - eliminate last remaining state_pipe usage.
    - add function master_find_mapent_by_devid().
    - use device id to locate autofs_point when setting log priotity.
    - add command pipe handling functions.
    - switch to application wide command pipe.
    - get rid of unused field submnt_count.
    - fix mount tree startup reconnect.
    - fix unterminated read in handle_cmd_pipe_fifo_message() (Coverity).
  - Resolves: rhbz#2177998


author: Ian Kent <ikent@redhat.com> - 5.1.4-103
changelog:
  - bz2177998 - deadlock while reading amd maps
    - rebuild to avoid possible NVR problems.
  - Related: rhbz#2177998


author: Ian Kent <ikent@redhat.com> - 5.1.4-104
changelog:
  - bz2208408 - autofs fails to start with combination of +auto.master and
    local direct map lookups after upgrading to 5.1.4-93.el8
    - fix memory leak in sasl_do_kinit() (Coverity).
    - fix fix mount tree startup reconnect.
  - Resolves: rhbz#2208408


author: Ian Kent <ikent@redhat.com> - 5.1.4-105
changelog:
  - bz2207801 - amd map format netgoup selector function not working
    - fix date for revision 104 changelog entry.
    - fix use_ignore_mount_option description.
    - include addtional log info for mounts.
    - fix amd selector function matching.
    - get rid entry thid field.
    - continue expire immediately after submount check.
    - add buffer length checks to autofs mount_mount().
    - eliminate realpath from mount of submount.
    - eliminate root param from autofs mount and umount.
    - remove redundant fstat from do_mount_direct().
    - get rid of strlen call in handle_packet_missing_direct().
    - remove redundant stat call in lookup_ghost().
    - set mapent dev and ino before adding to index.
    - change to use printf functions in amd parser.
    - dont call umount_subtree_mounts() on parent at umount.
    - dont take parent source lock at mount shutdown.
    - eliminate buffer usage from handle_mounts_cleanup().
    - fix possible use after free in handle_mounts_exit().
    - make submount cleanup the same as top level mounts.
    - eliminate some more alloca usage.
    - add soucre parameter to module functions.
    - add ioctlfd open helper.
    - make open files limit configurable.
  - Resolves: rhbz#2207801


author: Ian Kent <ikent@redhat.com> - 5.1.4-114.el8_10.2
changelog:
  - RHEL-72524 - autofs: deadlock between mnts_lookup_mount and mnts_remove_mount
    - fix deadlock in master_notify_submount().
  -Resolves: RHEL-72524


author: Kevin Fenzi <kevin@scrye.com> - 1.07.1-1https://bugs.archlinux.org/task/53546
changelog:
  - Update to 1.07.1
  - Fixes a bug that breaks kernel builds ( https://bugs.archlinux.org/task/53546 )


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.36-14
changelog:
  - Speed up parsing of DNS messages with many different names (CVE-2023-4408)
  - Prevent increased CPU consumption in DNSSEC validator (CVE-2023-50387 CVE-2023-50868)
  - Do not use header_prev in expire_lru_headers


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.36-16.1
changelog:
  - Resolve CVE-2024-1975
  - Resolve CVE-2024-1737
  - Add ability to change runtime limits for max types and records per name


author: Petr Menšík <pemensik@redhat.com> - 32:9.11.36-16.3
changelog:
  - Limit additional section records CPU processing (CVE-2024-11187)
  - Correct ANY queries to not have additional data appended


author: Yara Ahmad <yahmad@redhat.com> - 2.30-121
changelog:
  - Fix an illegal memory access when parsing an ELF file containing corrupt symbol version information.  (#2164700)


author: Xue haolin <xuehaolin@openanolis.org> - 2.30-125.0.1
changelog:
  - Rebrand to Anolis OS.
  - Add loongarch support. (lixing@loongson.cn)
  - Fixup LoongArch wrong debug line. (lixing@loongson.cn)
  - Add LoongArch missing opcode. (lixing@loongson.cn)
  - Fixup gas SIGSEGV for extremely long function name. (lixing@loongson.cn)
  - change loong64 to loongarch64. (lixing@loongson.cn)
  - Add ifunc support. (lixing@loongson.cn)
  - Delete R_LARCH_NONE for eh_frame. (lixing@loongson.cn)
  - Fixup pr21964 bug. (lixing@loongson.cn)
  - Add 3A6000 opcode. (lixing@loongson.cn)
  - Fix some testsuite error. (lixing@loongson.cn)
  - LoongArch: Always allocate a new pointer for section name. (fanpeng@loongson.cn)
  - LoongArch: binutils Remove ABI_XLP32 related code. (fanpeng@loongson.cn)


author: Iryna Shcherbina <ishcherb@redhat.com> - 1.2.0-2
changelog:
  - Update Python 2 dependency declarations to new packaging standards
    (See https://fedoraproject.org/wiki/FinalizingFedoraSwitchtoPython3)


author: Tomas Orsava <torsava@redhat.com> - 1.2.0-9
changelog:
  - Switch hardcoded python3 shebangs into the %{__python3} macro
  - Add missing BuildRequires on python3-devel so that %{__python3} macro is
    defined


author: Gopal Tiwari <gtiwari@redhat.com> - 5.56-1
changelog:
  + bluez-5.56-1
  - Fixing (#1965057)
  - Removing bccmd, enabling hid2hci as upstream removed the support in bluez-5.56


author: David Marlin <dmarlin@redhat.com> - 5.63-2
changelog:
  + bluez-5.63-2
  - Change default of ClassicBondedOnly to true to align with HID specification.
  - Resolves: RHEL-18429
  - Fixing CVE-2021-41229


author: - Bastien Nocera <bnocera@redhat.com> - 4.5-1
changelog:
  - Update to 4.5
  - Fix initscript to actually start bluetoothd by hand
  - Add chkconfig information to the initscript


author: - David Woodhouse <David.Woodhouse@intel.com> - 4.5-2
changelog:
  - Change main utils package name to 'bluez'; likewise its subpackages
  - Remove references to obsolete initscripts (hidd,pand,dund)


author: Karsten Hopp <karsten@redhat.com> 4.29-2
changelog:
  - bluez builds fine on s390(x) and the packages are required to build
    other packages, drop ExcludeArch


author: Bastien Nocera <bnocera@redhat.com> 4.47-2
changelog:
  - Remove hid2hci calls, they're in udev now
  - Work-around udev bug, bluetoothd wasn't getting enabled
    on coldplug


author: Bastien Nocera <bnocera@redhat.com> 4.50-2
changelog:
  - Remove obsoleted patches
  - Add another CUPS backend patch
  - Update cable pairing patch for new build system


author: Bastien Nocera <bnocera@redhat.com> 4.57-2
changelog:
  - Move the rfcomm.conf to the compat package, otherwise
    the comments at the top of it are confusing


author: Bastien Nocera <bnocera@redhat.com> 4.61-1
changelog:
  - Update to 4.61
  - Remove Wacom tablet enabler, now in the kernel
  - Fix linking with new DSO rules (#564799)


author: Dan Horák <dan[at]danny.cz> 4.66-3
changelog:
  - don't require the pin helper on s390(x) now, we can disable the whole
    bluetooth stack in the future


author: Orcan Ogetbil <oget[dot]fedora[at]gmail[dot]com> 4.69-3
changelog:
  - Comment out Requires: dbus-bluez-pin-helper for bootstrapping. Otherwise
    it drags in the old blueman, built against python-2.6


author: Lennart Poettering <lpoetter@redhat.com> - 4.94-2
changelog:
  - Enable bluetoothd by default
  - Follow-up on https://bugzilla.redhat.com/show_bug.cgi?id=694519 also fixing upgrades


author: Lennart Poettering <lpoetter@redhat.com> - 4.94-4
changelog:
  - Enable bluetoothd on all upgrades from 4.87-6 and older, in order to fix up broken F15 installations


author: Hans de Goede <hdegoede@redhat.com> 4.96-2
changelog:
  - hid2hci was recently removed from udev and added to bluez in 4.93,
    udev in Fedora-16 no longer has hid2hci -> enable it in our bluez builds.
    This fixes bluetooth not working on machines where the bluetooth hci
    initially shows up as a hid device, such as with many Dell laptops.


author: Hans de Goede <hdegoede@redhat.com> 4.96-3
changelog:
  - Put hid2hci into its own (optional) subpackage, so that people who
    just want to use their HID proxying HCI with the keyboard and mouse
    it came with, will have things working out of the box.
  - Put udev rules in /lib/udev, where package installed udev rules belong


author: Bastien Nocera <bnocera@redhat.com> 4.101-4
changelog:
  - Clean up requires and build requires
  - Use CUPS macro (#772236)
  - Enable audio socket so a2dp works in PulseAudio again (#874015)
  - Fix hid2hci not working with recent kernels (#877998)


author: Don Zickus <dzickus@redhat.com> 5.40-2
changelog:
  - obexd fixes to prevent crashes
  - add /etc/bluetooth/main.conf config file
  - set 'AutoEnable=true' in /etc/bluetooth/main.conf file


author: Peter Robinson <pbrobinson@fedoraproject.org> 5.44-1
changelog:
  - Update to 5.44
  - Enable deprecated option to keep all usual tools
  - Ship btattach tool
  - Minor spec cleanups


author: Bastien Nocera <bnocera@redhat.com> - 5.46-4
changelog:
  + bluez-5.46-4
  - Patches cleanup
  - Add DualShock4 cable pairing support
  - BIND_NOW support for RELRO
  - iCade autopairing support


author: Hans de Goede <hdegoede@redhat.com> - 5.46-5
changelog:
  - Add scripts to automatically btattach serial-port / uart connected
    Broadcom HCIs found on some Atom based x86 hardware


author: Peter Robinson <pbrobinson@fedoraproject.org> 5.47-1
changelog:
  - New upstream 5.47 bugfix release
  - Initial support for Bluetooth LE mesh
  - Blueooth 5 fixes and improvements


author: David Marlin <dmarlin@redhat.com> - 5.63-4
changelog:
  + bluez-5.63-4
  - Resolves: RHEL-35501
  - Fixing CVE-2023-50230
  - Resolves: RHEL-35504
  - Fixing CVE-2023-50229


author: David Marlin <dmarlin@redhat.com> - 5.63-5
changelog:
  + bluez-5.63-5
  - Resolves: RHEL-35371
  - Fixing CVE-2023-27349
  - Resolves: RHEL-35492
  - Fixing CVE-2023-51589


author: Christian Kellner <ckellner@redhat.com> - 0.1-2
changelog:
  - Set database path to /var/lib/boltd, create it during
    installation, which is needed for the service file to work.


author: Christian Kellner <ckellner@redhat.com> - 0.8-1
changelog:
  - bolt 0.8 upstream release with pre-boot ACL and IOMMU support
    D-Bus Configuration moved from sysconfdir to datadir
    Resolves: #1629715


author: Christian Kellner <ckellner@redhat.com> - 0.8-2
changelog:
  - Rebuilt for fixed gating.yaml (remove missing tier1 gate)
  - Unset env NOTIFY_SOCKET for no socket case in test-unix


author: Marian Csontos <mcsontos@redhat.com> 1.3-1
changelog:
  - Check for duplicates consistently in the clone and edit commands.
  - Apply correct command line precedence to --add-opts and --del-opts.
  - Correctly merge multiple --add/del-opts when editing or cloning.
  - Correctly propagate --add/del-opts in boom edit commands.
  - Enhanced logging of --add/del-opts merge logic.
  - The default Python interpreter is now /usr/bin/python.
  - Fixed re-ordering of options modifications when read from disk.
  - Do not set BootParams attributes for anonymous option words.
  - Make lvm_root_lv validation checks more strict.
  - Improve BootParams.from_entry() parameter recovery debug logging.
  - Include sample OsProfile for Fedora 32.
  - Re-set sandbox state in test suite to ensure run-to-run consistency.
  - Improve compatibility with Red Hat BLS implementation.
  - Allow non-boom managed entries to be listed and displayed.
  - Handle quirks in Red Hat's use of the BLS machine_id key.
  - Allow grub2 bootloader variables to be expanded when cloning entries.
  - Simplify clone_entry logic and make consistent with edit_entry.
  - Ensure stable ordering of legacy boot entry configuration.


author: Pavel Raiskup <praiskup@redhat.com> - 3.0.4-3
changelog:
  - better install manual pages for libarchive/bsdtar/bsdcpio (# ... )
  - several fedora-review fixes ...:
  - Source0 has moved to github.com
  - remove trailing white spaces
  - repair summary to better describe bsdtar/cpiotar utilities


author: Till Maas <opensource@till.name> - 3.1.2-11
changelog:
  - Rebuilt for Fedora 23 Change
    https://fedoraproject.org/wiki/Changes/Harden_all_packages_with_position-independent_code


author: Pavel Raiskup <praiskup@redhat.com> - 3.2.0-1
changelog:
  - new upstream release 3.2.0 (rhbz#1330345), per release notes:
    https://groups.google.com/d/msg/libarchive-discuss/qIzW7doKzxA/MVbUkjlNAAAJ


author: Pavel Raiskup <praiskup@redhat.com> - 3.3.1-1
changelog:
  - the latest release, per release notes:
    https://groups.google.com/forum/#!topic/libarchive-discuss/jfc7lBfrvVg


author: FeRD (Frank Dana) <ferdnyc@gmail.com> - 3.4.0-1
changelog:
  - New upstream release, adds RAR5 and ZIPX support (readonly)
  - Drop upstreamed patches
  - Add upstreamed patch to fix test failure with libzstd-1.4.2


author: Jakub Martisko <jamartis@redhat.com> - 1.0.6-28
changelog:
  - The previous fix caused some regressions
  - Use an updated patch that deals with the original issue+the regressions
  Resolves: RHEL-71140


author: Alexey Tikhonov <atikhono@redhat.com> - 1.13.0-6
changelog:
  - Resolves: rhbz#1989425 - CVE-2021-3672 c-ares: missing input validation of host names may lead to Domain Hijacking [rhel-8]


author: Alexey Tikhonov <atikhono@redhat.com> - 1.13.0-7
changelog:
  - Resolves: rhbz#2170867 - c-ares: buffer overflow in config_sortlist() due to missing string length check [rhel-8]


author: Bob Relyea <rrelyea@redhat.com> - 2021.2.48-81
changelog:
  - Update to CKBI 2.48 from NSS 3.64
  -    Removing:
  -     # Certificate "Verisign Class 3 Public Primary Certification Authority - G3"
  -     # Certificate "GeoTrust Global CA"
  -     # Certificate "GeoTrust Universal CA"
  -     # Certificate "GeoTrust Universal CA 2"
  -     # Certificate "Taiwan GRCA"
  -     # Certificate "GeoTrust Primary Certification Authority"
  -     # Certificate "thawte Primary Root CA"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G5"
  -     # Certificate "GeoTrust Primary Certification Authority - G3"
  -     # Certificate "thawte Primary Root CA - G2"
  -     # Certificate "thawte Primary Root CA - G3"
  -     # Certificate "GeoTrust Primary Certification Authority - G2"
  -     # Certificate "VeriSign Universal Root Certification Authority"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G4"
  -     # Certificate "EE Certification Centre Root CA"
  -     # Certificate "LuxTrust Global Root 2"
  -     # Certificate "Symantec Class 1 Public Primary Certification Authority - G4"
  -     # Certificate "Symantec Class 2 Public Primary Certification Authority - G4"
  -    Adding:
  -     # Certificate "Microsoft ECC Root Certificate Authority 2017"
  -     # Certificate "Microsoft RSA Root Certificate Authority 2017"
  -     # Certificate "e-Szigno Root CA 2017"
  -     # Certificate "certSIGN Root CA G2"
  -     # Certificate "Trustwave Global Certification Authority"
  -     # Certificate "Trustwave Global ECC P256 Certification Authority"
  -     # Certificate "Trustwave Global ECC P384 Certification Authority"
  -     # Certificate "NAVER Global Root Certification Authority"
  -     # Certificate "AC RAIZ FNMT-RCM SERVIDORES SEGUROS"
  -     # Certificate "GlobalSign Secure Mail Root R45"
  -     # Certificate "GlobalSign Secure Mail Root E45"
  -     # Certificate "GlobalSign Root R46"
  -     # Certificate "GlobalSign Root E46"


author: Bob Relyea <rrelyea@redhat.com> - 2021.2.48-82
changelog:
  - Update to CKBI 2.48 from NSS 3.66
  -    Removing:
  -     # Certificate "QuoVadis Root CA"
  -     # Certificate "Sonera Class 2 Root CA"
  -     # Certificate "Trustis FPS Root CA"
  -    Adding:
  -     # Certificate "GLOBALTRUST 2020"
  -     # Certificate "ANF Secure Server Root CA"
  -     # Certificate "Certum EC-384 CA"
  -     # Certificate "Certum Trusted Root CA"


author: Bob Relyea <rrelyea@redhat.com> - 2022.2.54-81
changelog:
  - Update to CKBI 2.54 from NSS 3.79
  -    Removing:
  -     # Certificate "GlobalSign Root CA - R2"
  -     # Certificate "DST Root CA X3"
  -     # Certificate "Cybertrust Global Root"
  -     # Certificate "Explicitly Distrusted DigiNotar PKIoverheid G2"
  -    Adding:
  -     # Certificate "TunTrust Root CA"
  -     # Certificate "HARICA TLS RSA Root CA 2021"
  -     # Certificate "HARICA TLS ECC Root CA 2021"
  -     # Certificate "HARICA Client RSA Root CA 2021"
  -     # Certificate "HARICA Client ECC Root CA 2021"
  -     # Certificate "Autoridad de Certificacion Firmaprofesional CIF A62634068"
  -     # Certificate "vTrus ECC Root CA"
  -     # Certificate "vTrus Root CA"
  -     # Certificate "ISRG Root X2"
  -     # Certificate "HiPKI Root CA - G1"
  -     # Certificate "Telia Root CA v2"
  -     # Certificate "D-TRUST BR Root CA 1 2020"
  -     # Certificate "D-TRUST EV Root CA 1 2020"


author: Bob Relyea <rrelyea@redhat.com> - 2022.2.54-80.0
changelog:
  - Update to CKBI 2.54 from NSS 3.79
  -    Adding:
  -     # Certificate "CAEDICOM Root"
  -     # Certificate "I.CA Root CA/RSA"
  -     # Certificate "MULTICERT Root Certification Authority 01"
  -     # Certificate "Certification Authority of WoSign G2"
  -     # Certificate "CA WoSign ECC Root"
  -     # Certificate "CCA India 2015 SPL"
  -     # Certificate "Swedish Government Root Authority v3"
  -     # Certificate "Swedish Government Root Authority v2"
  -     # Certificate "Tunisian Root Certificate Authority - TunRootCA2"
  -     # Certificate "OpenTrust Root CA G1"
  -     # Certificate "OpenTrust Root CA G2"
  -     # Certificate "OpenTrust Root CA G3"
  -     # Certificate "Certplus Root CA G1"
  -     # Certificate "Certplus Root CA G2"
  -     # Certificate "Government Root Certification Authority"
  -     # Certificate "A-Trust-Qual-02"
  -     # Certificate "Thailand National Root Certification Authority - G1"
  -     # Certificate "TrustCor ECA-1"
  -     # Certificate "TrustCor RootCert CA-2"
  -     # Certificate "TrustCor RootCert CA-1"
  -     # Certificate "Certification Authority of WoSign"
  -     # Certificate "CA 沃通根证书"
  -     # Certificate "SSC GDL CA Root B"
  -     # Certificate "SAPO Class 2 Root CA"
  -     # Certificate "SAPO Class 3 Root CA"
  -     # Certificate "SAPO Class 4 Root CA"
  -     # Certificate "CA Disig Root R1"
  -     # Certificate "Autoridad Certificadora Raíz Nacional de Uruguay"
  -     # Certificate "ApplicationCA2 Root"
  -     # Certificate "GlobalSign"
  -     # Certificate "Symantec Class 3 Public Primary Certification Authority - G6"
  -     # Certificate "Symantec Class 3 Public Primary Certification Authority - G4"
  -     # Certificate "Halcom Root CA"
  -     # Certificate "Swisscom Root EV CA 2"
  -     # Certificate "CFCA GT CA"
  -     # Certificate "Digidentity L3 Root CA - G2"
  -     # Certificate "SITHS Root CA v1"
  -     # Certificate "Macao Post eSignTrust Root Certification Authority (G02)"
  -     # Certificate "Autoridade Certificadora Raiz Brasileira v2"
  -     # Certificate "Swisscom Root CA 2"
  -     # Certificate "IGC/A AC racine Etat francais"
  -     # Certificate "PersonalID Trustworthy RootCA 2011"
  -     # Certificate "Swedish Government Root Authority v1"
  -     # Certificate "Swiss Government Root CA II"
  -     # Certificate "Swiss Government Root CA I"
  -     # Certificate "Network Solutions Certificate Authority"
  -     # Certificate "COMODO Certification Authority"
  -     # Certificate "LuxTrust Global Root"
  -     # Certificate "AC1 RAIZ MTIN"
  -     # Certificate "Microsoft Root Certificate Authority 2011"
  -     # Certificate "CCA India 2011"
  -     # Certificate "ANCERT Certificados Notariales V2"
  -     # Certificate "ANCERT Certificados CGN V2"
  -     # Certificate "EE Certification Centre Root CA"
  -     # Certificate "DigiNotar Root CA G2"
  -     # Certificate "Federal Common Policy CA"
  -     # Certificate "Autoridad de Certificacion Raiz del Estado Venezolano"
  -     # Certificate "Autoridad de Certificacion Raiz del Estado Venezolano"
  -     # Certificate "China Internet Network Information Center EV Certificates Root"
  -     # Certificate "Verizon Global Root CA"
  -     # Certificate "SwissSign Silver Root CA - G3"
  -     # Certificate "SwissSign Platinum Root CA - G3"
  -     # Certificate "SwissSign Gold Root CA - G3"
  -     # Certificate "Microsec e-Szigno Root CA 2009"
  -     # Certificate "SITHS CA v3"
  -     # Certificate "Certinomis - Autorité Racine"
  -     # Certificate "ANF Server CA"
  -     # Certificate "Thawte Premium Server CA"
  -     # Certificate "Thawte Server CA"
  -     # Certificate "TC TrustCenter Universal CA III"
  -     # Certificate "KEYNECTIS ROOT CA"
  -     # Certificate "I.CA - Standard Certification Authority, 09/2009"
  -     # Certificate "I.CA - Qualified Certification Authority, 09/2009"
  -     # Certificate "VI Registru Centras RCSC (RootCA)"
  -     # Certificate "CCA India 2007"
  -     # Certificate "Autoridade Certificadora Raiz Brasileira v1"
  -     # Certificate "ipsCA Global CA Root"
  -     # Certificate "ipsCA Main CA Root"
  -     # Certificate "Actalis Authentication CA G1"
  -     # Certificate "A-Trust-Qual-03"
  -     # Certificate "AddTrust External CA Root"
  -     # Certificate "ECRaizEstado"
  -     # Certificate "Configuration"
  -     # Certificate "FNMT-RCM"
  -     # Certificate "StartCom Certification Authority"
  -     # Certificate "TWCA Root Certification Authority"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G4"
  -     # Certificate "thawte Primary Root CA - G2"
  -     # Certificate "GeoTrust Primary Certification Authority - G2"
  -     # Certificate "VeriSign Universal Root Certification Authority"
  -     # Certificate "thawte Primary Root CA - G3"
  -     # Certificate "GeoTrust Primary Certification Authority - G3"
  -     # Certificate "E-ME SSI (RCA)"
  -     # Certificate "ACEDICOM Root"
  -     # Certificate "Autoridad Certificadora Raiz de la Secretaria de Economia"
  -     # Certificate "Correo Uruguayo - Root CA"
  -     # Certificate "CNNIC ROOT"
  -     # Certificate "Common Policy"
  -     # Certificate "Macao Post eSignTrust Root Certification Authority"
  -     # Certificate "Staat der Nederlanden Root CA - G2"
  -     # Certificate "NetLock Platina (Class Platinum) Főtanúsítvány"
  -     # Certificate "AC Raíz Certicámara S.A."
  -     # Certificate "Cisco Root CA 2048"
  -     # Certificate "CA Disig"
  -     # Certificate "InfoNotary CSP Root"
  -     # Certificate "UCA Global Root"
  -     # Certificate "UCA Root"
  -     # Certificate "DigiNotar Root CA"
  -     # Certificate "Starfield Services Root Certificate Authority"
  -     # Certificate "I.CA - Qualified root certificate"
  -     # Certificate "I.CA - Standard root certificate"
  -     # Certificate "e-Guven Kok Elektronik Sertifika Hizmet Saglayicisi"
  -     # Certificate "Japanese Government"
  -     # Certificate "AdminCA-CD-T01"
  -     # Certificate "Admin-Root-CA"
  -     # Certificate "Izenpe.com"
  -     # Certificate "TÜBİTAK UEKAE Kök Sertifika Hizmet Sağlayıcısı - Sürüm 3"
  -     # Certificate "Halcom CA FO"
  -     # Certificate "Halcom CA PO 2"
  -     # Certificate "Root CA"
  -     # Certificate "GPKIRootCA"
  -     # Certificate "ACNLB"
  -     # Certificate "state-institutions"
  -     # Certificate "state-institutions"
  -     # Certificate "SECOM Trust Systems CO.,LTD."
  -     # Certificate "D-TRUST Qualified Root CA 1 2007:PN"
  -     # Certificate "D-TRUST Root Class 2 CA 2007"
  -     # Certificate "D-TRUST Root Class 3 CA 2007"
  -     # Certificate "SSC Root CA A"
  -     # Certificate "SSC Root CA B"
  -     # Certificate "SSC Root CA C"
  -     # Certificate "Autoridad de Certificacion de la Abogacia"
  -     # Certificate "Root CA Generalitat Valenciana"
  -     # Certificate "VAS Latvijas Pasts SSI(RCA)"
  -     # Certificate "ANCERT Certificados CGN"
  -     # Certificate "ANCERT Certificados Notariales"
  -     # Certificate "ANCERT Corporaciones de Derecho Publico"
  -     # Certificate "GLOBALTRUST"
  -     # Certificate "Certipost E-Trust TOP Root CA"
  -     # Certificate "Certipost E-Trust Primary Qualified CA"
  -     # Certificate "Certipost E-Trust Primary Normalised CA"
  -     # Certificate "Cybertrust Global Root"
  -     # Certificate "GlobalSign"
  -     # Certificate "IGC/A"
  -     # Certificate "S-TRUST Authentication and Encryption Root CA 2005:PN"
  -     # Certificate "TC TrustCenter Universal CA I"
  -     # Certificate "TC TrustCenter Universal CA II"
  -     # Certificate "TC TrustCenter Class 2 CA II"
  -     # Certificate "TC TrustCenter Class 4 CA II"
  -     # Certificate "Swisscom Root CA 1"
  -     # Certificate "Microsec e-Szigno Root CA"
  -     # Certificate "LGPKI"
  -     # Certificate "AC RAIZ DNIE"
  -     # Certificate "Common Policy"
  -     # Certificate "TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı"
  -     # Certificate "A-Trust-nQual-03"
  -     # Certificate "A-Trust-nQual-03"
  -     # Certificate "CertRSA01"
  -     # Certificate "KISA RootCA 1"
  -     # Certificate "KISA RootCA 3"
  -     # Certificate "NetLock Minositett Kozjegyzoi (Class QA) Tanusitvanykiado"
  -     # Certificate "A-CERT ADVANCED"
  -     # Certificate "A-Trust-Qual-01"
  -     # Certificate "A-Trust-nQual-01"
  -     # Certificate "A-Trust-Qual-02"
  -     # Certificate "Staat der Nederlanden Root CA"
  -     # Certificate "Serasa Certificate Authority II"
  -     # Certificate "TDC Internet"
  -     # Certificate "America Online Root Certification Authority 2"
  -     # Certificate "Autoridad de Certificacion Firmaprofesional CIF A62634068"
  -     # Certificate "Government Root Certification Authority"
  -     # Certificate "RSA Security Inc"
  -     # Certificate "Public Notary Root"
  -     # Certificate "GeoTrust Global CA"
  -     # Certificate "GeoTrust Global CA 2"
  -     # Certificate "GeoTrust Universal CA"
  -     # Certificate "GeoTrust Universal CA 2"
  -     # Certificate "QuoVadis Root Certification Authority"
  -     # Certificate "Autoridade Certificadora Raiz Brasileira"
  -     # Certificate "Post.Trust Root CA"
  -     # Certificate "Microsoft Root Authority"
  -     # Certificate "Microsoft Root Certificate Authority"
  -     # Certificate "Microsoft Root Certificate Authority 2010"
  -     # Certificate "Entrust.net Secure Server Certification Authority"
  -     # Certificate "UTN-USERFirst-Object"
  -     # Certificate "BYTE Root Certification Authority 001"
  -     # Certificate "CISRCA1"
  -     # Certificate "ePKI Root Certification Authority - G2"
  -     # Certificate "ePKI EV SSL Certification Authority - G1"
  -     # Certificate "AC Raíz Certicámara S.A."
  -     # Certificate "SSL.com EV Root Certification Authority RSA"
  -     # Certificate "LuxTrust Global Root 2"
  -     # Certificate "ACA ROOT"
  -     # Certificate "Security Communication ECC RootCA1"
  -     # Certificate "Security Communication RootCA3"
  -     # Certificate "CHAMBERS OF COMMERCE ROOT - 2016"
  -     # Certificate "Network Solutions RSA Certificate Authority"
  -     # Certificate "Network Solutions ECC Certificate Authority"
  -     # Certificate "Australian Defence Public Root CA"
  -     # Certificate "SI-TRUST Root"
  -     # Certificate "Halcom Root Certificate Authority"
  -     # Certificate "Application CA G3 Root"
  -     # Certificate "GLOBALTRUST 2015"
  -     # Certificate "Microsoft ECC Product Root Certificate Authority 2018"
  -     # Certificate "emSign Root CA - G2"
  -     # Certificate "emSign Root CA - C2"
  -     # Certificate "Microsoft ECC TS Root Certificate Authority 2018"
  -     # Certificate "DigiCert CS ECC P384 Root G5"
  -     # Certificate "DigiCert CS RSA4096 Root G5"
  -     # Certificate "DigiCert RSA4096 Root G5"
  -     # Certificate "DigiCert ECC P384 Root G5"
  -     # Certificate "HARICA Code Signing RSA Root CA 2021"
  -     # Certificate "HARICA Code Signing ECC Root CA 2021"
  -     # Certificate "Microsoft Identity Verification Root Certificate Authority 2020"


author: Bob Relyea <rrelyea@redhat.com> - 2022.2.54-80.2
changelog:
  - Update to CKBI 2.54 from NSS 3.79
  -    Removing:
  -     # Certificate "TrustCor ECA-1"
  -     # Certificate "TrustCor RootCert CA-2"
  -     # Certificate "TrustCor RootCert CA-1"
  -     # Certificate "Network Solutions Certificate Authority"
  -     # Certificate "COMODO Certification Authority"
  -     # Certificate "Autoridad de Certificacion Raiz del Estado Venezolano"
  -     # Certificate "Microsec e-Szigno Root CA 2009"
  -     # Certificate "TWCA Root Certification Authority"
  -     # Certificate "Izenpe.com"
  -     # Certificate "state-institutions"
  -     # Certificate "GlobalSign"
  -     # Certificate "Common Policy"
  -     # Certificate "A-Trust-nQual-03"
  -     # Certificate "A-Trust-Qual-02"
  -     # Certificate "Autoridad de Certificacion Firmaprofesional CIF A62634068"
  -     # Certificate "Government Root Certification Authority"
  -     # Certificate "AC Raíz Certicámara S.A."


author: Robert Relyea <rrelyea@redhat.com> - 2023.2.60_v7.0.306-80.0
changelog:
  - Update to CKBI 2.60_v7.0.306 from NSS 3.91
  -    Removing:
  -     # Certificate "Camerfirma Global Chambersign Root"
  -     # Certificate "Staat der Nederlanden EV Root CA"
  -     # Certificate "OpenTrust Root CA G1"
  -     # Certificate "Swedish Government Root Authority v1"
  -     # Certificate "DigiNotar Root CA G2"
  -     # Certificate "Federal Common Policy CA"
  -     # Certificate "TC TrustCenter Universal CA III"
  -     # Certificate "CCA India 2007"
  -     # Certificate "ipsCA Global CA Root"
  -     # Certificate "ipsCA Main CA Root"
  -     # Certificate "Macao Post eSignTrust Root Certification Authority"
  -     # Certificate "InfoNotary CSP Root"
  -     # Certificate "DigiNotar Root CA"
  -     # Certificate "Root CA"
  -     # Certificate "GPKIRootCA"
  -     # Certificate "D-TRUST Qualified Root CA 1 2007:PN"
  -     # Certificate "TC TrustCenter Universal CA I"
  -     # Certificate "TC TrustCenter Universal CA II"
  -     # Certificate "TC TrustCenter Class 2 CA II"
  -     # Certificate "TC TrustCenter Class 4 CA II"
  -     # Certificate "TÜRKTRUST Elektronik Sertifika Hizmet Sağlayıcısı"
  -     # Certificate "CertRSA01"
  -     # Certificate "KISA RootCA 3"
  -     # Certificate "A-CERT ADVANCED"
  -     # Certificate "A-Trust-Qual-01"
  -     # Certificate "A-Trust-nQual-01"
  -     # Certificate "Serasa Certificate Authority II"
  -     # Certificate "TDC Internet"
  -     # Certificate "America Online Root Certification Authority 2"
  -     # Certificate "RSA Security Inc"
  -     # Certificate "Public Notary Root"
  -     # Certificate "Autoridade Certificadora Raiz Brasileira"
  -     # Certificate "Post.Trust Root CA"
  -     # Certificate "Entrust.net Secure Server Certification Authority"
  -     # Certificate "ePKI EV SSL Certification Authority - G1"
  -    Adding:
  -     # Certificate "DigiCert TLS ECC P384 Root G5"
  -     # Certificate "DigiCert TLS RSA4096 Root G5"
  -     # Certificate "DigiCert SMIME ECC P384 Root G5"
  -     # Certificate "DigiCert SMIME RSA4096 Root G5"
  -     # Certificate "Certainly Root R1"
  -     # Certificate "Certainly Root E1"
  -     # Certificate "E-Tugra Global Root CA RSA v3"
  -     # Certificate "E-Tugra Global Root CA ECC v3"
  -     # Certificate "DIGITALSIGN GLOBAL ROOT RSA CA"
  -     # Certificate "DIGITALSIGN GLOBAL ROOT ECDSA CA"
  -     # Certificate "BJCA Global Root CA1"
  -     # Certificate "BJCA Global Root CA2"
  -     # Certificate "Symantec Enterprise Mobile Root for Microsoft"
  -     # Certificate "A-Trust-Root-05"
  -     # Certificate "ADOCA02"
  -     # Certificate "StartCom Certification Authority G2"
  -     # Certificate "ATHEX Root CA"
  -     # Certificate "EBG Elektronik Sertifika Hizmet Sağlayıcısı"
  -     # Certificate "GeoTrust Primary Certification Authority"
  -     # Certificate "thawte Primary Root CA"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G5"
  -     # Certificate "America Online Root Certification Authority 1"
  -     # Certificate "Juur-SK"
  -     # Certificate "ComSign CA"
  -     # Certificate "ComSign Secured CA"
  -     # Certificate "ComSign Advanced Security CA"
  -     # Certificate "Global Chambersign Root"
  -     # Certificate "Sonera Class2 CA"
  -     # Certificate "VeriSign Class 3 Public Primary Certification Authority - G3"
  -     # Certificate "VeriSign, Inc."
  -     # Certificate "GTE CyberTrust Global Root"
  -     # Certificate "Equifax Secure Global eBusiness CA-1"
  -     # Certificate "Equifax"
  -     # Certificate "Class 1 Primary CA"
  -     # Certificate "Swiss Government Root CA III"
  -     # Certificate "Application CA G4 Root"
  -     # Certificate "SSC GDL CA Root A"
  -     # Certificate "GlobalSign Code Signing Root E45"
  -     # Certificate "GlobalSign Code Signing Root R45"
  -     # Certificate "Entrust Code Signing Root Certification Authority - CSBR1"


author: Frantisek Krenzelok <fkrenzel@redhat.com> - 2024.2.69_v8.0.303-80.0
changelog:
  - Update to CKBI 2.69_v8.0.303 from NSS 3.101.1
  -    Removing:
  -     # Certificate "Verisign Class 1 Public Primary Certification Authority - G3"
  -     # Certificate "Verisign Class 2 Public Primary Certification Authority - G3"
  -     # Certificate "Security Communication Root CA"
  -     # Certificate "Camerfirma Chambers of Commerce Root"
  -     # Certificate "Hongkong Post Root CA 1"
  -     # Certificate "Autoridad de Certificacion Firmaprofesional CIF A62634068"
  -     # Certificate "Symantec Class 1 Public Primary Certification Authority - G6"
  -     # Certificate "Symantec Class 2 Public Primary Certification Authority - G6"
  -     # Certificate "TrustCor RootCert CA-1"
  -     # Certificate "TrustCor RootCert CA-2"
  -     # Certificate "TrustCor ECA-1"
  -     # Certificate "FNMT-RCM"
  -    Adding:
  -     # Certificate "LAWtrust Root CA2 (4096)"
  -     # Certificate "Sectigo Public Email Protection Root E46"
  -     # Certificate "Sectigo Public Email Protection Root R46"
  -     # Certificate "Sectigo Public Server Authentication Root E46"
  -     # Certificate "Sectigo Public Server Authentication Root R46"
  -     # Certificate "SSL.com TLS RSA Root CA 2022"
  -     # Certificate "SSL.com TLS ECC Root CA 2022"
  -     # Certificate "SSL.com Client ECC Root CA 2022"
  -     # Certificate "SSL.com Client RSA Root CA 2022"
  -     # Certificate "Atos TrustedRoot Root CA ECC G2 2020"
  -     # Certificate "Atos TrustedRoot Root CA RSA G2 2020"
  -     # Certificate "Atos TrustedRoot Root CA ECC TLS 2021"
  -     # Certificate "Atos TrustedRoot Root CA RSA TLS 2021"
  -     # Certificate "TrustAsia Global Root CA G3"
  -     # Certificate "TrustAsia Global Root CA G4"
  -     # Certificate "CommScope Public Trust ECC Root-01"
  -     # Certificate "CommScope Public Trust ECC Root-02"
  -     # Certificate "CommScope Public Trust RSA Root-01"
  -     # Certificate "CommScope Public Trust RSA Root-02"
  -     # Certificate "D-Trust SBR Root CA 1 2022"
  -     # Certificate "D-Trust SBR Root CA 2 2022"
  -     # Certificate "Telekom Security SMIME ECC Root 2021"
  -     # Certificate "Telekom Security TLS ECC Root 2020"
  -     # Certificate "Telekom Security SMIME RSA Root 2023"
  -     # Certificate "Telekom Security TLS RSA Root 2023"
  -     # Certificate "FIRMAPROFESIONAL CA ROOT-A WEB"
  -     # Certificate "SECOM Trust.net"
  -     # Certificate "Chambers of Commerce Root"
  -     # Certificate "VeriSign Class 2 Public Primary Certification Authority - G3"
  -     # Certificate "SSL.com Code Signing RSA Root CA 2022"
  -     # Certificate "SSL.com Code Signing ECC Root CA 2022"


author: David Howells <dhowells@redhat.com> 0.10.6-1
changelog:
  - Note the correct licence.
  - Handle malformed kernel status correctly.
  - Permit culling to be disabled on the command line with the -N flag.
  - Suspend culling when cache space is short and cache objects are pinned.


author: David Howells <dhowells@redhat.com> 0.10.8-1
changelog:
  - Use systemd interaction macros in specfile installation sections [RH BZ 850053].
  - Fix the service file to use /usr/sbin/ rather than /sbin/.
  - Turn on RELRO and PIE build hardening in RPM builds.


author: Jan Macku <jamacku@redhat.com> - 1.15-1
changelog:
  - spec: sync specfile with Fedora
  - makefile: Use rpmdev-bumpspec's legacy date option
  - Add feature to generate specfile entry, commit and archive


author: Jan Macku <jamacku@redhat.com> - 1.16-1
changelog:
  - alternatives: add --keep-foreign (#57)
  - Translations update from Weblate
  - ci: Onboard chkconfig to Packit
  - zanata: remove zanata related stuff
  - Use make macros
  - alternatives: use one function for path cleaning
  - CI: specify more closely when to run CI
  - Add basic CI and README
  - spec: sync specfile with Fedora


author: Jan Macku <jamacku@redhat.com> - 1.19.2-1
changelog:
  - alternatives: --keep-foreign incorrectly handles non-existent files
  - alternatives: isLink should return 0 in case of lstat error
  - spec: Replace not working awk command with sed (#63)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.3-2
changelog:
  - move pidfile to /var/run/chrony to allow chronyd to remove it on exit
    (#1584585)
  - avoid blocking in getrandom system call (#1592425)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.3-3
changelog:
  - fix PIDFile in local chronyd.service on upgrades from chrony < 3.3-2
    (#1614800)
  - add workaround for late reload of unit file (#1614751)


author: Miroslav Lichvar <mlichvar@redhat.com> 3.5-1
changelog:
  - update to 3.5 (#1685469 #1677218)
  - fix shellcheck warnings in helper scripts (#1711948)
  - update ntp2chrony script


author: Miroslav Lichvar <mlichvar@redhat.com> 4.1-1
changelog:
  - update to 4.1 (#1895003 #1847853 #1929157)
  - add NetworkManager dispatcher script to add servers from DHCP even without
    dhclient (#1933139)
  - restrict permissions of /var/lib/chrony and /var/log/chrony (#1939295)
  - reset chrony-helper state after stopping chronyd (#1971697)
  - add gcc-c++ and make to build requirements
  - move default paths in /var/run to /run


author: Miroslav Lichvar <mlichvar@redhat.com> 4.2-1
changelog:
  - update to 4.2 (#2062356)
  - fix chrony-helper to delete sources by their original name (#2061660)
  - update ntp2chrony script (#2018045 #2063766)


author: Miroslav Lichvar <mlichvar@redhat.com> 4.5-2.el8_10
changelog:
  - fix crash on reload command during start (RHEL-59112)
  - enable AES-CMAC support using gnutls (RHEL-59032)


author: Weitao Zhou <zhouweitao@openanolis.org> 4.5-2.0.1
changelog:
  - Fix unavailable time server for Anolis OS
  - skip test error for loongarch64 (zhangwenlong@loongson.cn)


author: David King <amigadave@amigadave.com> - 0.16-1
changelog:
  - Update to 0.16 (#1144863)
  - Remove clean section and BuildRoot tag
  - Update URL and Sourc0
  - Use license macro for COPYING
  - Use parallel make flags
  - Preserve timestamps during install


author: Jeff Layton <jlayton@redhat.com> - 6.7-5
changelog:
  - more updates, switch to rst for manpages
  - update mount.cifs manpage to describe defaults better (BZ#1474539)


author: Sachin Prabhu <sprabhu@redhat.com> - 6.8-3
changelog:
  - Add manual gating tests
  - docs: cleanup rst formating
  - mount.cifs.rst: document new (no)handlecache mount option
  - manpage: update mount.cifs manpage with info about rdma option
  - checkopts: add python script to cross check mount options
  - mount.cifs.rst: document missing options, correct wrong ones
  - checkopts: report duplicated options in man page
  - mount.cifs.rst: more cleanups
  - mount.cifs.rst: document vers=3 mount option
  - mount.cifs.rst: document vers=3.02 mount option
  - cifs: Allow DNS resolver key to expire
  - mount.cifs: be more verbose and helpful regarding mount errors
  - Update mount.cifs with vers=default mount option and SMBv3.0.2
  - mount.cifs.rst: update vers=3.1.1 option description
  - getcifsacl: Do not go to parse_sec_desc if getxattr fails.
  - getcifsacl: Improve help usage and add -h option.
  - setcifsacl: fix adding ACE when owner sid in unexpected location
  - cifs.upcall: fix a compiler warning
  - mount.cifs Add various missing parms from the help text
  - mount.cifs: add more options to help message
  - mount.cifs: detect GMT format of snapshot version
  - Update man page for mount.cifs to add new options
  - mount.cifs.rst: mention kernel version for snapshots
  - Fix authors and maintainers


author: Kamil Dudka <kdudka@redhat.com> - 8.30-9
changelog:
  - split: fix --number=K/N to output correct part of file (#1921246)
  - rm: do not skip files upon failure to remove an empty dir (#1905481)
  - use statx instead of stat when available (#1760300)


author: Kamil Dudka <kdudka@redhat.com> - 8.30-13
changelog:
  - ls, stat: avoid triggering automounts (#2044981)
  - make `df --direct` work again (#2058686)
  - doc: improve description of the --kibibytes option of ls (#1527391)


author: Stanislaw Gruszka <sgruszka@redhat.com> - 3.18_2018.05.31-2
changelog:
  - Update wireless-regdb to 2018.05.31
  - Remove python2 dependency
  - Use sforshee signed reulatory.bin (required by modern kernels)


author: Ondřej Pohořelský <opohorel@redhat.com> - 1.11-17.20190603git
changelog:
  - update to the latest release
  - add sed require
  - remove %clean section
  - remove obsolete Group tag
  - fix upstream URL
  - Resolves: rhbz#1696449, rhbz#1703982


author: Tomáš Mráz <tmraz@redhat.com> - 20200610-1.git0ac8b1f
changelog:
  - fallback to FIPS policy instead of the default-config in FIPS mode
  - java: Document properly how to override the crypto policy
  - krb5: No support for 3des anymore
  - reorder the signature algorithms to follow the order in default openssl list


author: Alexander Sosedkin <asosedkin@redhat.com> - 20210617-1.gitc776d3e
changelog:
  - implement scoped policies, e.g., cipher@SSH = ... (#1960266)
  - implement algorithm globbing, e.g., cipher@SSH = -*-CBC
  - deprecate derived properties:
    tls_cipher, ssh_cipher, ssh_group, ike_protocol
  - deprecate sha1_in_dnssec property
  - deprecate unscoped form of protocol property
  - update documentation
  - expand upstream test coverage
  - openssl: set MinProtocol / MaxProtocol separately for TLS and DTLS (#1946522)
  - support AES-192 ciphers in custom policies for non-TLS scenarios (#1876846)
  - stop claiming Camellia is disabled (#1925104)
  - disable CBC ciphers in FUTURE for everything but Kerberos (#1933016)
  - drop SHA224 from signature algorithms in FIPS:OSPP (#1934755)
  - condition ecdh-sha2-nistp384 on SECP384R1


author: Alexander Sosedkin <asosedkin@redhat.com> - 20211116-1.gitae470d6
changelog:
  - OSPP: relax -ECDSA-SHA2-512, -FFDHE-*
  - fips-mode-setup, fips-finish-install: call zipl more often (s390x-specific)
  - libssh: enable diffie-hellman-group14-sha256 support
  - openssl: fix disabling ChaCha20


author: Alexander Sosedkin <asosedkin@redhat.com> - 20221215-1.gitece0092
changelog:
  - bind: expand the list of disableable algorithms
  - tests/java: fix java.security.disableSystemPropertiesFile=true
  - stop accidentally creating /etc/crypto-policies/back-ends/.config symlink


author: Alexander Sosedkin <asosedkin@redhat.com> - 20230731-1.git3177e06
changelog:
  - krb5: sort enctypes mac-first, cipher-second, prioritize SHA-2 ones
  - krb5: fix policy generator to account for macs
  - docs: replace `FIPS 140-2` with just `FIPS 140`


author: Ondrej Kozina <okozina@redhat.com> - 2.3.3-4
changelog:
  - patch: Fix reencryption for custom devices with data segments
    set to use cipher_null.
  - Resolves: #1927409


author: Ondrej Kozina <okozina@redhat.com> - 2.3.7-1
changelog:
  - update to cryptsetup 2.3.7
  - fixes CVE-2021-4122
  - patch: Fix suboptimal optimization in bundled argon2.
  - patch: Fix bogus memory allocation/device read with
           invalid LUKS2 headers
  - patch: Fix typo in luksRepair prompt.
  - Resolves: #2021815 #2022301 #2031859


author: Daniel Zatovic <dzatovic@redhat.com> - 2.3.7-4
changelog:
  - patch: Remove LUKS2 encryption data size restriction.
  - patch: Abort encryption when header and data devices are same.
  - Resolves: #2150254


author: Daniel Zatovic <dzatovic@redhat.com> - 2.3.7-6
changelog:
  - patch: Delegate FIPS mode detection to configured crypto backend
  - patch: Disallow use of internal kenrel crypto driver names in "capi"
  - patch: Also disallow active devices with internal kernel names
  - patch: Fix init_by_name to allow unknown cipher format in dm-crypt
  - patch: Fix reencryption to fail properly for unknown cipher
  - patch: Fix activation of LUKS2 with capi format cipher and kernel
  - Resolves: #2212772 #2193342


author: Pavel Filipenský <pfilipen@redhat.com> - 4.19.3-1
changelog:
  - resolves: RHEL-16483 - Update to version 4.19.3
  - resolves: RHEL-11361
              - Fix CVE-2023-3961 CVE-2023-4091 CVE-2023-42669
  - resolves: RHEL-2228  - Logging Format Enhancement
  - resolves: RHEL-1965  - Fix smbget issues with DFS shares
  - resolves: RHEL-2108  - Fix force user/group issues with 'allow trusted domains = yes'
  - resolves: RHEL-17122 - Fix memory corruption in libnss_winbind


author: Pavel Filipenský <pfilipen@redhat.com> - 4.19.4-2
changelog:
  - Fix error in PREIN scriptlet in rpm package samba-common
  - related: RHEL-16483 - Update to version 4.19.4


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-55
changelog:
  - RHEL-14933 cupsd memory leak in cupsdDeleteJob() with "PreserveJobHistory Off"
  - RHEL-15309 cupsd fails to open cups-files.conf and the resulting error message is lost


author: Zdenek Dohnal <zdohnal@redhat.com> - 1:2.2.6-56
changelog:
  - RHEL-10702 cupsGetJobs fails to connect if poll() gets POLLOUT|POLLHUP in revents
  - RHEL-19200 Recommend new cups-filters subpackages with weak dep for better upgrade exp


author: Pavol Zacik <pzacik@redhat.com> - 1:2.2.6-60
changelog:
  - RHEL-40386 cups: Cupsd Listen arbitrary chmod 0140777
  - Delete the domain socket file after stopping the cups.socket service
  - Fix cupsd Listener checks


author: Kamil Dudka <kdudka@redhat.com> - 7.61.1-31
changelog:
  - fix GSS delegation too eager connection re-use (CVE-2023-27536)
  - fix FTP too eager connection reuse (CVE-2023-27535)


author: Jacek Migacz <jmigacz@redhat.com> - 7.61.1-34
changelog:
  - when keyboard-interactive auth fails, try password (#2229800)
  - cap SFTP packet size sent (RHEL-5311)
  - unify the upload/method handling (CVE-2023-28322)
  - fix cookie injection with none file (CVE-2023-38546)
  - fix HTTP2 connection failure with HTTP2 framing layer (RHEL-5657)
  - lowercase the domain names before PSL checks (CVE-2023-46218)


author: Jacek Migacz <jmigacz@redhat.com> - 7.61.1-34.el8_10.3
changelog:
  - asyn-thread: create a socketpair to wait on (RHEL-34906)
  - fix crash, when talking to a NTLM proxy in FIPS mode (RHEL-32641)


author: Simo Sorce <simo@redhat.com> - 2.1.27-0.4rc7
changelog:
  - Add patch form Upstream PR559 to use RC4 implementation from OpenSSL
  - Resolves bz#1618744
  - Fix multilib issue bz#1663120


author: Jeff Moyer <jmoyer@redhat.com> - 67-1.el8
changelog:
  - Rebase to v67.  This brings in the following features:
    - support for the 'security frozen' sysfs attribute
    - support for using pmem as system ram
    - various cleanup and bug fixes
  - Fix load-keys failure in initramfs (Jeff Moyer)
  - Resolves: bz#1724531 bz#1730673 bz#1741164 bz#1741165 bz#1749888 bz#1749889


author: Jeff Moyer <jmoyer@redhat.com> - 71.1-4.el8
changelog:
  - Pull in fixes from upstream v72 and v73 (Jeff Moyer)
    - Fix enable-namespace all reporting errors incorrectly
    - Add support for inject-smart on papr scm
  - Related: bz#2090190 bz#1986185 bz#2040074


author: Ray Strode <rstrode@redhat.com> - 1:1.12.8-22
changelog:
  - Use hangup signal instead of termination signal to
    kill sesssion monitoring script to appeach tcsh.
    Related: #2089362


author: Ray Strode <rstrode@redhat.com> - 1:1.12.8-23
changelog:
  - Address race for very short running sessions in SSH
    session monitoring script.
    Related: #2089362


author: Ray Strode <rstrode@redhat.com> - 1.12.8-25
changelog:
  - Ensure only one dbus-daemon is spawned for all shells sharing
    a single connection.
    Resolves: #2189201


author: Zhao Hang <wb-zh951434@alibaba-inc.com> - 1.12.8-26.0.1
changelog:
  - Add doc sub package, requires and provides
  - Fix build failure(Chang Gao)
  - Fix CVE-2023-34969 (Bo Liu)


author: Marian Csontos <mcsontos@redhat.com> - 2.03.14-7
changelog:
  - Fix lvm crash when recreating PV with UUID of a missing PV.
  - Fix lvconvert --type vdo-pool with --test should not write signature.
  - Use correect profile in lvmdbusd preventing messages in JSON output.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.14-8
changelog:
  - Fix [vdo_]use_compression options.
  - Fix vgimportdevices operating on incomplete VGs fails when nothing to import.
  - Fix message processing on thin-pool extension leaving devices behind.


author: Marian Csontos <mcsontos@redhat.com> - 2.03.14-14
changelog:
  - Fix multisegment RAID1 allocator using one disk for both legs.
  - Fix lvconvert -m 0 taking rimage_0 even if it is out of sync.
  - Add warning message when mirror images have (r)efresh bit set.
  - Document lv_attr volume type bit (g) for raid+integrity in lvs(8).


author: Liwei Ge <geliwei@openanolis.org> - 2.03.14-14.0.1
changelog:
  - Enable lockd for loongarch64
  - cherry-pick `add sw arch #6898e139a0ffe3cfc5bbca37a37f02048d0a40cf`. (nijie@wxiat.com)


author: Jeremy Katz <katzj@redhat.com> 2.00.08-5
changelog:
  - Fix sysfs patch to find sysfs
  - Take patch from dwalsh and tweak a little for setting SELinux contexts on
    device node creation and also do it on the symlink creation.  
    Part of this should probably be pushed down to device-mapper instead


author: Alasdair Kergon <agk@redhat.com> 2.00.10-1
changelog:
  - Update to version 2.00.10, which incorporates the RH-specific patches
    and includes various fixes and enhancements detailed in WHATS_NEW.


author: Alasdair Kergon <agk@redhat.com> 2.00.12-1
changelog:
  - Install default /etc/lvm/lvm.conf.
  - Move non-static binaries to /usr/sbin.
  - Add temporary links in /sbin to lvm.static until rc.sysinit gets updated.


author: Jeremy Katz <katzj@redhat.com> - 2.00.20-2
changelog:
  - add patch for iSeries viodasd support
  - add patch to check file type using stat(2) if d_type == DT_UNKNOWN (#129674)


author: Alasdair Kergon <agk@redhat.com> - 2.00.24-1
changelog:
  - More upstream fixes.  (Always check WHATS_NEW file for details.)
  - Add requested BuildRequires. [bz 124916, 132408]


author: Alasdair Kergon <agk@redhat.com> - 2.01.07-1.0
changelog:
  - Remove build directory from built-in path.
  - Extra /dev scanning required for clustered operation.


author: Alasdair Kergon <agk@redhat.com> - 2.01.08-1.0
changelog:
  - Improve detection of external changes affecting internal cache.
  - Add clustered VG attribute.
  - Suppress rmdir opendir error message.


author: Alasdair Kergon <agk@redhat.com> - 2.01.08-2.0
changelog:
  - No longer abort read operations if archive/backup directories aren't there.
  - Add runtime directories and file to the package.


author: Alasdair Kergon <agk@redhat.com> - 2.02.11-1.0
changelog:
  - New upstream with numerous fixes and small enhancements.
    (See the WHATS_NEW documentation file for complete upstream changelog.)


author: Alasdair Kergon <agk@redhat.com> - 2.02.12-2
changelog:
  - Remove no-longer-used ldconfig from lvm2-cluster and fix lvmconf
    to cope without the shared library.


author: Alasdair Kergon <agk@redhat.com> - 2.02.16-1
changelog:
  - Fix VG clustered read locks to use PR not CR.
  - Adjust some alignments for ia64/sparc.
  - Fix mirror segment removal to use temporary error segment.
  - Always compile debug logging into clvmd.
  - Add startup timeout to clvmd startup script.
  - Add -T (startup timeout) switch to clvmd.
  - Improve lvm_dump.sh robustness.


author: Alasdair Kergon <agk@redhat.com> - 2.02.17-1
changelog:
  - Add missing pvremove error message when device doesn't exist.
  - When lvconvert allocates a mirror log, respect parallel area constraints.
  - Check for failure to allocate just the mirror log.
  - Support mirror log allocation when there is only one PV: area_count now 0.
  - Fix detection of smallest area in _alloc_parallel_area() for cling policy.
  - Add manpage entry for clvmd -T
  - Fix hang in clvmd if a pre-command failed.


author: Alasdair Kergon <agk@redhat.com> - 2.02.18-1
changelog:
  - Use CFLAGS when linking so mixed sparc builds can supply -m64.
  - Prevent permission changes on active mirrors.
  - Print warning instead of error message if lvconvert cannot zero volume.
  - Add snapshot options to lvconvert man page.
  - dumpconfig accepts a list of configuration variables to display.
  - Change dumpconfig to use --file to redirect output to a file.
  - Avoid vgreduce error when mirror code removes the log LV.
  - Fix ambiguous vgsplit error message for split LV.
  - Fix lvextend man page typo.
  - Use no flush suspending for mirrors.
  - Fix create mirror with name longer than 22 chars.


author: Alasdair Kergon <agk@redhat.com> - 2.02.19-1
changelog:
  - Fix a segfault if an empty config file section encountered.
  - Fix partition table processing after sparc changes.
  - Fix cmdline PE range processing segfault.
  - Move basic reporting functions into libdevmapper.


author: Alasdair Kergon <agk@redhat.com> - 2.02.20-1
changelog:
  - Fix exit statuses of reporting tools.
  - Add some missing close() and fclose() return code checks.
  - Add devices/ignore_suspended_devices to ignore suspended dm devices.
  - Fix refresh_toolcontext() always to wipe persistent device filter cache.
  - Long-lived processes write out persistent dev cache in refresh_toolcontext().
  - Streamline dm_report_field_* interface.
  - Update reporting man pages.
  - Add --clustered to man pages.
  - Add field definitions to report help text.


author: Alasdair Kergon <agk@redhat.com> - 2.02.21-1
changelog:
  - Fix vgsplit to handle mirrors.
  - Reorder fields in reporting field definitions.
  - Fix vgs to treat args as VGs even when PV fields are displayed.
  - Fix md signature check to handle both endiannesses.


author: Alasdair Kergon <agk@redhat.com> - 2.02.22-1
changelog:
  - Add ncurses-static BuildRequires after package split.
  - Fix loading of segment_libraries.
  - If a PV reappears after it was removed from its VG, make it an orphan.
  - Don't update metadata automatically if VGIDs don't match.
  - Fix some vgreduce --removemissing command line validation.
  - Trivial man page corrections (-b and -P).
  - Add global/units to example.conf.
  - Remove readline support from lvm.static.


author: Alasdair Kergon <agk@redhat.com> - 2.02.23-1
changelog:
  - Fix vgrename active LV check to ignore differing vgids.
  - Fix two more segfaults if an empty config file section encountered.
  - Fix a leak in a reporting error path.
  - Add devices/cache_dir & devices/cache_file_prefix, deprecating devices/cache.


author: Alasdair Kergon <agk@redhat.com> - 2.02.24-1
changelog:
  - Add BuildRequires readline-static until makefiles get fixed.
  - Fix processing of exit status in init scripts
  - Fix vgremove to require at least one vg argument.
  - Fix reading of striped LVs in LVM1 format.
  - Flag nolocking as clustered so clvmd startup sees clustered LVs.
  - Add a few missing pieces of vgname command line validation.
  - Support the /dev/mapper prefix on most command lines.


author: Alasdair Kergon <agk@redhat.com> - 2.02.27-1
changelog:
  - Add -f to vgcfgrestore to list metadata backup files.
  - Add pvdisplay --maps implementation.
  - Add devices/preferred_names config regex list for displayed device names.
  - Add vg_mda_count and pv_mda_count columns to reports.
  - Change cling alloc policy attribute character from 'C' to l'.
  - Print warnings to stderr instead of stdout.
  - Fix snapshot cow area deactivation if origin is not active.
  - Reinitialise internal lvmdiskscan variables when called repeatedly.
  - Allow keyboard interrupt during user prompts when appropriate.
  - Fix deactivation code to follow dependencies and remove symlinks.
  - Fix a segfault in device_is_usable() if a device has no table.
  - Fix creation and conversion of mirrors with tags.
  - Add command stub for pvck.
  - Handle vgsplit of an entire VG as a vgrename.
  - Fix vgsplit for lvm1 format (set and validate VG name in PVs metadata).
  - Split metadata areas in vgsplit properly.
  - Fix and clarify vgsplit error messages.
  - Update lists of attribute characters in man pages.
  - Remove unsupported LVM1 options from vgcfgrestore man page.
  - Update vgcfgrestore man page to show mandatory VG name.
  - Update vgrename man page to include UUID and be consistent with lvrename.
  - Add some more debug messages to clvmd startup.
  - Fix thread race in clvmd.
  - Make clvmd cope with quorum devices.
  - Add extra internal error checking to clvmd.
  - Fix missing lvm_shell symbol in lvm2cmd library.
  - Move regex functions into libdevmapper.
  - Add kernel and device-mapper targets versions to lvmdump.
  - Add /sys/block listings to lvmdump.
  - Make lvmdump list /dev recursively.
  - Mark /etc/lvm subdirectories as directories in spec file.


author: Alasdair Kergon <agk@redhat.com> - 2.02.28-1
changelog:
  - vgscan and pvscan now trigger clvmd -R, which should now work.
  - Fix clvmd logging so you can get lvm-level debugging out of it.
  - Allow clvmd debug to be turned on in a running daemon using clvmd -d [-C].
  - Add more cluster info to lvmdump.
  - Fix lvdisplay man page to say LV size is reported in sectors, not KB.
  - Fix loading of persistent cache if cache_dir is used.
  - Only permit --force, --verbose and --debug arguments to be repeated.
  - Add support for renaming mirrored LVs.
  - Add --mirrorlog argument to specify log type for mirrors.
  - Don't leak a file descriptor if flock or fcntl fails.
  - Detect stream write failure reliably.
  - Reduce severity of lstat error messages to very_verbose.
  - Update to use autoconf 2.61, while still supporting 2.57.


author: Alasdair Kergon <agk@redhat.com> - 2.02.29-1
changelog:
  - Make clvmd backup vg metadata on remote nodes.
  - Decode cluster locking state in log message.
  - Change file locking state messages from debug to very verbose.
  - Fix --addtag to drop @ prefix from name.
  - Stop clvmd going haywire if a pre_function fails.
  - Avoid nested vg_reads when processing PVs in VGs and fix associated locking.
  - Attempt to remove incomplete LVs with lvcreate zeroing/activation problems.
  - Add full read_ahead support.
  - Add lv_read_ahead and lv_kernel_read_ahead fields to reports and lvdisplay.
  - Prevent lvconvert -s from using same LV as origin and snapshot.
  - Fix human-readable output of odd numbers of sectors.
  - Add pv_mda_free and vg_mda_free fields to reports for raw text format.
  - Add LVM2 version to 'Generated by' comment in metadata.
  - Show 'not usable' space when PV is too large for device in pvdisplay.
  - Ignore and fix up any excessive device size found in metadata.
  - Fix error message when fixing up PV size in lvm2 metadata (2.02.11).
  - Fix orphan-related locking in pvdisplay and pvs.
  - Fix missing VG unlocks in some pvchange error paths.
  - Add some missing validation of VG names.
  - Detect md superblocks version 1.0, 1.1 and 1.2.
  - Add some pv-related error paths.
  - Handle future sysfs subsystem/block/devices directory structure.
  - Fix a bug in lvm_dump.sh checks for lvm/dmsetup binaries.
  - Fix underquotations in lvm_dump.sh.
  - Print --help output to stdout, not stderr.
  - After a cmdline processing error, don't print help text but suggest --help.
  - Add %PVS extents option to lvresize, lvextend, and lvcreate.
  - Remove no-longer-correct restrictions on PV arg count with stripes/mirrors.
  - Fix strdup memory leak in str_list_dup().
  - Link with -lpthread when static SELinux libraries require that.
  - Detect command line PE values that exceed their 32-bit range.
  - Include strerror string in dev_open_flags' stat failure message.
  - Avoid error when --corelog is provided without --mirrorlog. (2.02.28)
  - Correct --mirrorlog argument name in man pages (not --log).
  - Clear MIRROR_NOTSYNCED LV flag when converting from mirror to linear.
  - Modify lvremove to prompt for removal if LV active on other cluster nodes.
  - Add '-f' to vgremove to force removal of VG even if LVs exist.


author: Alasdair Kergon <agk@redhat.com> - 2.02.30-6
changelog:
  - Remove static libraries and binaries and move most binaries out of /usr.
  - Fix a segfault if using pvs with --all argument.
  - Fix vgreduce PV list processing not to process every PV in the VG.
  - Reinstate VG extent size and stripe size defaults (halved).
  - Set default readahead to twice maximium stripe size.
  - Detect non-orphans without MDAs correctly.
  - Prevent pvcreate from overwriting MDA-less PVs belonging to active VGs.
  - Don't use block_on_error with mirror targets version 1.12 and above.
  - Change vgsplit -l (for unimplemented --list) into --maxlogicalvolumes.
  - Update vgsplit to accept vgcreate options when new VG is destination.
  - Update vgsplit to accept existing VG as destination.
  - Major restructuring of pvmove and lvconvert code, adding stacking support.
  - Add new convert_lv field to lvs output.
  - Permit LV segment fields with PV segment reports.
  - Extend lvconvert to use polldaemon and wait for completion of initial sync.
  - Add seg_start_pe and seg_pe_ranges to reports.
  - Add fsadm interface to filesystem resizing tools.
  - Update --uuid argument description in man pages.
  - Print warning when lvm tools are running as non-root.


author: Alasdair Kergon <agk@redhat.com> - 2.02.31-7
changelog:
  - Avoid readahead error message when using default setting of lvcreate -M1.
  - Fix lvcreate --nosync not to wait for non-happening sync.
  - Add very_verbose lvconvert messages.


author: Alasdair Kergon <agk@redhat.com> - 2.02.32-8
changelog:
  - Fix pvs, vgs, lvs error exit status on some error paths.
  - Fix new parameter validation in vgsplit and test mode.
  - Fix internal metadata corruption in lvchange --resync.


author: Alasdair Kergon <agk@redhat.com> - 2.02.33-9
changelog:
  - Improve internal label caching performance while locks are held.
  - Fix mirror log name construction during lvconvert.


author: Alasdair Kergon <agk@redhat.com> - 2.02.38-1
changelog:
  - libdevmapper: Make dm_hash_iter safe against deletion.
  - libdevmapper: Accept a NULL pointer to dm_free silently.
  - libdevmapper: Calculate string size within dm_pool_grow_object.
  - libdevmapper: Send reporting field help text to stderr not stdout.

  - dmsetup: Add tables_loaded, readonly and suspended columns to reports.
  - dmsetup: Add --nameprefixes for new report output format FIELD=VALUE.

  - Add --nameprefixes to reporting tools for field name prefix output format.
  - Fix return values for reporting commands when run with no PVs, LVs, or VGs.
  - Add omitted unlock_vg() call when sigint_caught() during vg processing.
  - Fix free_count when reading pool metadata.
  - Fix segfault when using pvcreate on a device containing pool metadata.
  - In script-processing mode, stop if any command fails.
  - Warn if command exits with non-zero status code without a prior log_error.
  - Correct config file line numbers in messages when parsing comments.
  - Add missing deactivation after activation failure in lvcreate -Zy.
  - When removing LV symlinks, skip any where the VG name is not determined.
  - Fix vgsplit internal counting of snapshot LVs.
  - Update vgsplit to only restrict split with active LVs involved in split.
  - Fix vgsplit to only move hidden 'snapshotN' LVs when necessary.
  - Update vgsplit man page to reflect lvnames on the cmdline.
  - Update vgsplit to take "-n LogicalVolumeName" on the cmdline.
  - Fix vgsplit error paths to release vg_to lock.
  - Avoid spurious duplicate VG messages referring to VGs that are gone.
  - Drop dev_name_confirmed error message to debug level.
  - Fix setpriority error message to signed int.
  - Add assertions to trap deprecated P_ and V_ lock usage.
  - Avoid using DLM locks with LCK_CACHE type P_ lock requests.
  - Don't touch /dev in vgrename if activation is disabled.
  - Exclude VG_GLOBAL from internal concurrent VG lock counter.
  - Fix vgmerge snapshot_count when source VG contains snapshots.
  - Fix internal LV counter when a snapshot is removed.
  - Fix metadata corruption writing lvm1-formatted metadata with snapshots.
  - Fix lvconvert -m0 allocatable space check.
  - Don't attempt remote metadata backups of non-clustered VGs.
  - Improve preferred_names lvm.conf example.
  - Fix vgdisplay 'Cur LV' field to match lvdisplay output.
  - Fix lv_count report field to exclude hidden LVs.
  - Fix some pvmove error status codes.
  - Indicate whether or not VG is clustered in vgcreate log message.
  - Mention default --clustered setting in vgcreate man page.
  - Fix vgreduce to use vg_split_mdas to check sufficient mdas remain.
  - Update lvmcache VG lock state for all locking types now.
  - Fix output if overriding command_names on cmdline.
  - Add check to vg_commit() ensuring VG lock held before writing new VG metadata.
  - Add validation of LV name to pvmove -n.
  - Add some basic internal VG lock validation.
  - Fix vgsplit internal counting of snapshot LVs.
  - Update vgsplit to only restrict split with active LVs involved in split.
  - Fix vgsplit to only move hidden 'snapshotN' LVs when necessary.
  - Update vgsplit man page to reflect lvnames on the cmdline.
  - Update vgsplit to take "-n LogicalVolumeName" on the cmdline.
  - Fix vgsplit error paths to release vg_to lock.
  - Fix vgsplit locking of new VG.
  - Avoid erroneous vgsplit error message for new VG.
  - Suppress duplicate message when lvresize fails because of invalid vgname.
  - Cache VG metadata internally while VG lock is held.
  - Fix redundant lvresize message if vg doesn't exist.
  - Make clvmd-cman use a hash rather than an array for node updown info.
  - Decode numbers in clvmd debugging output.
  - Fix uninitialised mutex in clvmd if all daemons are not running at startup.
  - Add config file overrides to clvmd when it reads the active LVs list.
  - Make clvmd refresh the context correctly when lvm.conf is updated.
  - Fix another allocation bug with clvmd and large node IDs.
  - Fix uninitialised variable in clvmd that could cause odd hangs.
  - Correct command name in lvmdiskscan man page.
  - clvmd no longer crashes if it sees nodeids over 50.
  - Fix potential deadlock in clvmd thread handling.
  - Update usage message for clvmd.
  - Fix clvmd man page not to print <br> and clarified debug options.
  - Escape double quotes and backslashes in external metadata and config data.
  - Correct a function name typo in _line_append error message.
  - Fix resetting of MIRROR_IMAGE and VISIBLE_LV after removal of LV.
  - Fix remove_layer_from_lv to empty the LV before removing it.
  - Add missing no-longer-used segs_using_this_lv test to check_lv_segments.
  - Fix lvconvert detection of mirror conversion in progress.
  - Avoid automatic lvconvert polldaemon invocation when -R specified.
  - Fix 'pvs -a' to detect VGs of PVs without metadata areas.
  - Divide up internal orphan volume group by format type.
  - Fix lvresize to support /dev/mapper prefix in the LV name.
  - Fix lvresize to pass new size to fsadm when extending device.
  - Fix unfilled parameter passed to fsadm from lvresize.
  - Update fsadm to call lvresize if the partition size differs (with option -l).
  - Fix fsadm to support VG/LV names.


author: Alasdair Kergon <agk@redhat.com> - 2.02.38-2
changelog:
  - dmsetup: Add --unquoted and --rows to 'info -c' command.
  - libdevmapper: Fix inverted no_flush debug message.


author: Alasdair Kergon <agk@redhat.com> - 2.02.39-3
changelog:
  - Fix up cache for PVs without mdas after consistent VG metadata is processed.
  - Update validation of safe mirror log type conversions in lvconvert.
  - Fix lvconvert to disallow snapshot and mirror combinations.
  - Fix reporting of LV fields alongside unallocated PV segments.
  - Add --unquoted and --rows to reporting tools.
  - Avoid undefined status code after _memlock commands in lvm shell.
  - Fix and improve readahead 'auto' calculation for stripe_size.
  - Fix lvchange output for -r auto setting if auto is already set.
  - Fix add_mirror_images not to dereference uninitialized log_lv upon failure.
  - Add --force to lvextend and lvresize.
  - Fix vgchange to not activate component mirror volumes directly.


author: Fabio M. Di Nitto <fdinitto@redhat.cm> - 2.02.39-5
changelog:
  - Add BuildRequires on cmanlib-devel. This is required after libcman split
    from cman and cman-devel into cmanlib and cmanlib-devel.
  - Make versioned BuildRequires on cman-devel and cmanlib-devel more strict
    to guarantee to get the right version.


author: Alasdair Kergon <agk@redhat.com> - 2.02.43-1
changelog:
  - Upstream merge of device-mapper and lvm2 source.
  - Correct prototype for --permission on lvchange and lvcreate man pages.
  - Exit with non-zero status from vgdisplay if couldn't show any requested VG.
  - libdevmapper.pc: Use simplified x.y.z version number.
  - Accept locking fallback_to_* options in the global section as documented.
  - Several fixes to lvconvert involving mirrors.
  - Avoid overwriting in-use on-disk text metadata when metadataarea fills up.
  - Generate man pages from templates and include version.
  - Fix misleading error message when there are no allocatable extents in VG.
  - Fix handling of PVs which reappeared with old metadata version.
  - Fix validation of --minor and --major in lvcreate to require -My always.
  - Allow lvremove to remove LVs from VGs with missing PVs.
  - In VG with PVs missing, by default allow activation of LVs that are complete.
  - Require --force with --removemissing in vgreduce to remove partial LVs.
  - No longer write out PARTIAL flag into metadata backups.
  - Treat new default activation/missing_stripe_filler "error" as an error target.
  - Add devices/md_chunk_alignment to lvm.conf.
  - Pass struct physical_volume to pe_align and adjust for md chunk size.
  - Avoid shuffling remaining mirror images when removing one, retaining primary.
  - Prevent resizing an LV while lvconvert is using it.
  - Avoid repeatedly wiping cache while VG_GLOBAL is held in vgscan & pvscan.
  - Fix pvresize to not allow resize if PV has two metadata areas.
  - Fix setting of volume limit count if converting to lvm1 format.
  - Fix vgconvert logical volume id metadata validation.
  - Fix lvmdump metadata gather option (-m) to work correctly.
  - Fix allocation bug in text metadata format write error path.
  - Fix vgcfgbackup to properly check filename if template is used.
  - vgremove tries to remove lv snapshot first.
  - Improve file descriptor leak detection to display likely culprit and filename.
  - Avoid looping forever in _pv_analyze_mda_raw used by pvck.
  - Change lvchange exit status to indicate if any part of the operation failed.
  - Fix pvchange and pvremove to handle PVs without mdas.
  - Fix pvchange -M1 -u to preserve existing extent locations when there's a VG.
  - Cease recognising snapshot-in-use percentages returned by early devt kernels.
  - Add backward-compatible flags field to on-disk format_text metadata.
  - libdevmapper: Only resume devices in dm_tree_preload_children if size changes.
  - libdevmapper: Extend deptree buffers so the largest possible device numbers fit.
  - libdevmapper: Underline longer report help text headings.


author: Alasdair Kergon <agk@redhat.com> - 2.02.44-1
changelog:
  - Add --nameprefixes, --unquoted, --rows to pvs, vgs, lvs man pages.
  - Fix lvresize size conversion for fsadm when block size is not 1K.
  - Fix pvs segfault when run with orphan PV and some VG fields.
  - Display a 'dev_size' of zero for missing devices in reports.
  - Add pv_mda_size to pvs and vg_mda_size to vgs.
  - Fix lvmdump /sys listing to include virtual devices directory.
  - Add "--refresh" functionality to vgchange and vgmknodes.
  - Avoid exceeding LV size when wiping device.
  - Calculate mirror log size instead of using 1 extent.
  - Ensure requested device number is available before activating with it.
  - Fix incorrect exit status from 'help <command>'.
  - Fix vgrename using UUID if there are VGs with identical names.
  - Fix segfault when invalid field given in reporting commands.
  - Use better random seed value in temp file creation.
  - Add read_urandom to read /dev/urandom. Use in uuid calculation.
  - Fix race in vgcreate that would result in second caller overwriting first.
  - Fix uninitialised lv_count in vgdisplay -c.
  - Don't skip updating pvid hash when lvmcache_info struct got swapped.
  - Fix startup race in clvmd.
  - Cope with snapshot dependencies when removing a whole VG with lvremove.
  - Make man pages and tool help text consistent using | for alternative options.
  - Add "all" field to reports expanding to all fields of report type.
  - Enforce device name length and character limitations in libdm.


author: Alasdair Kergon <agk@redhat.com> - 2.02.45-1
changelog:
  - Update clusterlib and corosync dependencies.
  - Attempt proper clean up in child before executing fsadm or modprobe.
  - Do not scan devices if reporting only attributes from PV label.
  - Use pkgconfig to obtain corosync library details during configuration.
  - Fix error returns in clvmd-corosync interface to DLM.
  - Add --refresh to vgchange and vgmknodes man pages.
  - Pass --test from lvresize to fsadm as --dry-run.
  - Prevent fsadm from checking mounted filesystems.
  - No longer treats any other key as 'no' when prompting in fsadm.
  - Add --dataalignment to pvcreate to specify alignment of data area.
  - Fix unblocking of interrupts after several commands.
  - Provide da and mda locations in debug message when writing text format label.
  - Mention the restriction on file descriptors at invocation on the lvm man page.
  - Index cached vgmetadata by vgid not vgname to cope with duplicate vgnames.
  - No longer require kernel and metadata major numbers to match.
  - If kernel supports only one dm major number, use in place of any supplied.
  - Add option to /etc/sysconfig/cluster to select cluster type for clvmd.
  - Allow clvmd to start up if its lockspace already exists.
  - Separate PV label attributes which do not need parse metadata when reporting.
  - Remove external dependency on the 'cut' command from fsadm.
  - Fix pvs segfault when pv mda attributes requested for unavailable PV.
  - Add fsadm support for reszing ext4 filesysystems.
  - Change lvm2-cluster to corosync instead of cman.
  - Fix some old changelog typos in email addresses.


author: Alasdair Kergon <agk@redhat.com> - 2.02.47-1
changelog:
  - Inherit readahead setting from underlying devices during activation.
  - Detect LVs active on remote nodes by querying locks if supported.
  - Enable online resizing of mirrors.
  - Use suspend with flush when device size was changed during table preload.
  - Implement query_resource_fn for cluster_locking.
  - Support query_resource_fn in locking modules.
  - Fix pvmove to revert operation if temporary mirror creation fails.
  - Fix metadata export for VG with missing PVs.
  - Add vgimportclone and install it and the man page by default.
  - Force max_lv restriction only for newly created LV.
  - Do not query nonexistent devices for readahead.
  - Reject missing PVs from allocation in toollib.
  - Fix PV datalignment for values starting prior to MDA area. (2.02.45)
  - Add sparse devices: lvcreate -s --virtualoriginsize (hidden zero origin).
  - Fix minimum width of devices column in reports.
  - Add lvs origin_size field.
  - Implement lvconvert --repair for repairing partially-failed mirrors.
  - Fix vgreduce --removemissing failure exit code.
  - Fix remote metadata backup for clvmd.
  - Fix metadata backup to run after vg_commit always.
  - Fix pvs report for orphan PVs when segment attributes are requested.
  - Fix pvs -a output to not read volume groups from non-PV devices.
  - Introduce memory pools per volume group (to reduce memory for large VGs).
  - Always return exit error status when locking of volume group fails.
  - Fix mirror log convert validation question.
  - Enable use of cached metadata for pvs and pvdisplay commands.
  - Fix memory leak in mirror allocation code.
  - Save and restore the previous logging level when log level is changed.
  - Fix error message when archive initialization fails.
  - Make sure clvmd-corosync releases the lockspace when it exits.
  - Fix segfault for vgcfgrestore on VG with missing PVs.
  - Block SIGTERM & SIGINT in clvmd subthreads.
  - Detect and conditionally wipe swapspace signatures in pvcreate.
  - Fix maximal volume count check for snapshots if max_lv set for volume group.
  - Fix lvcreate to remove unused cow volume if the snapshot creation fails.
  - Fix error messages when PV uuid or pe_start reading fails.
  - Flush memory pool and fix locking in clvmd refresh and backup command.
  - Fix unlocks in clvmd-corosync. (2.02.45)
  - Fix error message when adding metadata directory to internal list fails.
  - Fix size and error message of memory allocation at backup initialization.
  - Remove old metadata backup file after renaming VG.
  - Restore log_suppress state when metadata backup file is up-to-date.
  - Export dm_tree_node_size_changed() from libdevmapper.
  - Fix segfault when getopt processes dmsetup -U, -G and -M options.
  - Add _smp_mflags to compilation and remove DESTDIR.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 2.02.47-2
changelog:
  - BuildRequire newer version of corosynclib (0.97-1) to link against
    latest libraries version (soname 4.0.0).
  - Add lvm2-2_02_48-cluster-cpg-new-api.patch to port clvmd-corosync
    to new corosync cpg API.


author: Alasdair Kergon <agk@redhat.com> - 2.02.48-1
changelog:
  - Abort if automatic metadata correction fails when reading VG to update it.
  - Don't fallback to default major number in libdm: use dm_task_set_major_minor.
  - Explicitly request fallback to default major number in device mapper.
  - Ignore suspended devices during repair.
  - Suggest using lvchange --resync when adding leg to not-yet-synced mirror.
  - Destroy toolcontext on clvmd exit to avoid memory pool leaks.
  - Fix lvconvert not to poll mirror if no conversion in progress.
  - Fix memory leaks in toolcontext error path.
  - Reinstate partial activation support in clustered mode.
  - Allow metadata correction even when PVs are missing.
  - Use 'lvm lvresize' instead of 'lvresize' in fsadm.
  - Do not use '-n' realine option in fsadm for rescue disk compatiblity.
  - Round up requested readahead to at least one page and print warning.
  - Try to repair vg before actual vgremove when force flag provided.
  - Unify error messages when processing inconsistent volume group.
  - Introduce lvconvert --use_policies (repair policy according to lvm.conf).
  - Fix rename of active snapshot with virtual origin.
  - Fix convert polling to ignore LV with different UUID.
  - Cache underlying device readahead only before activation calls.
  - Fix segfault when calculating readahead on missing device in vgreduce.
  - Remove verbose 'visited' messages.
  - Handle multi-extent mirror log allocation when smallest PV has only 1 extent.
  - Add LSB standard headers and functions (incl. reload) to clvmd initscript.
  - When creating new LV, double-check that name is not already in use.
  - Remove /dev/vgname/lvname symlink automatically if LV is no longer visible.
  - Rename internal vorigin LV to match visible LV.
  - Suppress 'removed' messages displayed when internal LVs are removed.
  - Fix lvchange -a and -p for sparse LVs.
  - Fix lvcreate --virtualsize to activate the new device immediately.
  - Make --snapshot optional with lvcreate --virtualsize.
  - Generalise --virtualoriginsize to --virtualsize.
  - Skip virtual origins in process_each_lv_in_vg() without --all.
  - Fix counting of virtual origin LVs in vg_validate.
  - Attempt to load dm-zero module if zero target needed but not present.
  - Add crypt target handling to libdevmapper tree nodes.
  - Add splitname command to dmsetup.
  - Add subsystem, vg_name, lv_name, lv_layer fields to dmsetup reports.
  - Make mempool optional in dm_split_lvm_name() in libdevmapper.


author: Fabio M. Di Nitto <fdinitto@redhat.com> 2.02.48-2
changelog:
  - BuildRequires and Requires on stable versions of both corosync-lib (1.0.0-1)
    and cluster-lib (3.0.0-20).


author: Alasdair Kergon <agk@redhat.com> - 2.02.49-1
changelog:
  - Exclude VG_GLOBAL from vg_write_lock_held so scans open devs read-only again.
  - Fix dev name mismatch in vgcreate man page example.
  - Check md devices for a partition table during device scan.
  - Add extended device (blkext) and md partition (mdp) types to filters.
  - Make text metadata read errors for segment areas more precise.
  - Fix text segment metadata read errors to mention correct segment name.
  - Include segment and LV names in text segment import error messages.
  - Fix memory leak in vgsplit when re-reading the vg.
  - Permit several segment types to be registered by a single shared object.
  - Update the man pages to document size units uniformly.
  - Allow commandline sizes to be specified in terms of bytes and sectors.
  - Update 'md_chunk_alignment' to use stripe-width to align PV data area.
  - Fix segfault in vg_release when vg->cmd is NULL.
  - Add dm_log_with_errno and dm_log_with_errno_init, deprecating the old fns.
  - Fix whitespace in linear target line to fix identical table line detection.
  - Add device number to more log messages during activation.


author: Alasdair Kergon <agk@redhat.com> - 2.02.50-1
changelog:
  - Add libs and devel subpackages to include shared libraries for applications.
    N.B. The liblvm2app API is not frozen yet and may still be changed
    Send any feedback to the mailing list lvm-devel@redhat.com.
  - Remove obsolete --with-dmdir from configure.
  - Add global/wait_for_locks to lvm.conf so blocking for locks can be disabled.
  - Fix race condition with vgcreate and vgextend on same device since 2.02.49.
  - Add an API version number, LVM_LIBAPI, to the VERSION string.
  - Return EINVALID_CMD_LINE not success when invalid VG name format is used.
  - Remove unnecessary messages after vgcreate/vgsplit code change in 2.02.49.
  - Store any errno and error messages issued while processing each command.


author: Alasdair Kergon <agk@redhat.com> - 2.02.51-2
changelog:
  - Fix clvmd locking broken in 2.02.50-1.
  - Only change LV /dev symlinks on ACTIVATE not PRELOAD (so not done twice).
  - Make lvconvert honour log mirror options combined with downconversion.
  - Add devices/data_alignment_detection to lvm.conf.
  - Add devices/data_alignment_offset_detection to lvm.conf.
  - Add --dataalignmentoffset to pvcreate to shift start of aligned data area.
  - Update synopsis in lvconvert manpage to mention --repair.
  - Document -I option of clvmd in the man page.


author: Milan Broz <mbroz@redhat.com> - 2.02.51-3
changelog:
  - Fix global locking in PV reporting commands (2.02.49).
  - Fix pvcreate on a partition (2.02.51).
  - Build clvmd with both cman and corosync support.


author: Alasdair Kergon <agk@redhat.com> - 2.02.52-1
changelog:
  - Prioritise write locks over read locks by default for file locking.
  - Add local lock files with suffix ':aux' to serialise locking requests.
  - Fix readonly locking to permit writeable global locks (for vgscan). (2.02.49)
  - Make readonly locking available as locking type 4.
  - Fix global locking in PV reporting commands (2.02.49).
  - Make lvchange --refresh only take a read lock on volume group.
  - Fix race where non-blocking file locks could be granted in error.
  - Fix pvcreate string termination in duplicate uuid warning message.
  - Don't loop reading sysfs with pvcreate on a non-blkext partition (2.02.51).
  - Fix vgcfgrestore error paths when locking fails (2.02.49).
  - Make clvmd check corosync to see what cluster interface it should use.
  - Fix vgextend error path - if ORPHAN lock fails, unlock / release vg (2.02.49).
  - Clarify use of PE ranges in lv{convert|create|extend|resize} man pages.
  - Restore umask when device node creation fails.
  - Check kernel vsn to use 'block_on_error' or 'handle_errors' in mirror table.


author: Alasdair Kergon <agk@redhat.com> - 2.02.52-2
changelog:
  - Build dmeventd and place into a separate set of subpackages.
  - Remove no-longer-needed BuildRoot tag and buildroot emptying at install.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.52-3
changelog:
  - Enable udev synchronisation code.
  - Install default udev rules for device-mapper and LVM2.
  - Add BuildRequires: libudev-devel.
  - Add Requires: libudev (to check udev is running).
  - Add Requires: util-linux-ng (blkid used in udev rules).


author: Alasdair Kergon <agk@redhat.com> - 2.02.53-1
changelog:
  - Create any directories in /dev with umask 022. (#507397)
  - Handle paths supplied to dm_task_set_name by getting name from /dev/mapper.
  - Add splitname and --yes to dmsetup man page.


author: Alasdair Kergon <agk@redhat.com> - 2.02.54-1
changelog:
  - Add implict pvcreate support to vgcreate and vgextend.
  - Add --pvmetadatacopies for pvcreate, vgcreate, vgextend, vgconvert.
  - Distinguish between powers of 1000 and powers of 1024 in unit suffixes.
  - Restart lvconverts in vgchange.
  - Don't attempt to deactivate an LV if any of its snapshots are in use.
  - Return error if lv_deactivate fails to remove device from kernel.
  - Treat input units of both 's' and 'S' as 512-byte sectors.  (2.02.49)
  - Use standard output units for 'PE Size' and 'Stripe size' in pv/lvdisplay.
  - Add global/si_unit_consistency to enable cleaned-up use of units in output.
  - Only do lock conversions in clvmd if we are explicitly asked for one.
  - Fix clvmd segfault when refresh_toolcontext fails.
  - Cleanup mimagetmp LV if allocation fails for new lvconvert mimage.
  - Handle metadata with unknown segment types more gracefully.
  - Make clvmd return 0 on success rather than 1.
  - Correct example.conf to indicate that lvm2 not lvm1 is the default format.
  - Delay announcing mirror monitoring to syslog until initialisation succeeded.
  - Update lvcreate/lvconvert man pages to explain PhysicalVolume parameter.
  - Document --all option in man pages and cleanup {pv|vg|lv}{s|display} pages.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.54-2
changelog:
  - Enable udev synchronisation code.
  - Install default udev rules for device-mapper and LVM2.
  - Add BuildRequires: libudev-devel.
  - Add Requires: libudev (to check udev is running).
  - Add Requires: util-linux-ng (blkid used in udev rules).
  - Add Conflicts: dracut < 002-18 (for dracut to install required udev rules)


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.54-3
changelog:
  - Support udev flags even when udev_sync is disabled.
  - Remove last_rule from udev_rules.
  - Udev rules cleanup.


author: Alasdair Kergon <agk@redhat.com> - 2.02.55-1
changelog:
  - Fix deadlock when changing mirrors due to unpaired memlock refcount changes.
  - Fix pvmove region_size overflow for very large PVs.
  - Fix lvcreate and lvresize %PVS argument always to use sensible total size.
  - Directly restrict vgchange to activating visible LVs.
  - Fix hash lookup segfault when keys compared are different lengths.
  - Flush stdout after yes/no prompt.
  - Recognise DRBD devices and handle them like md devices.
  - Add dmsetup --inactive support (requires kernel support targetted for 2.6.33).


author: Alasdair Kergon <agk@redhat.com> - 2.02.56-2
changelog:
  - Revert vg_read_internal change as clvmd was not ready for vg_read. (2.02.55)
  - Fix unbalanced memory locking when deactivating LVs.
  - Add missing vg_release to pvs and pvdisplay to fix memory leak.
  - Do not try to unlock VG which is not locked when processing a VG.
  - Update .cache file after every full device rescan in clvmd.
  - Refresh all device filters (including sysfs) before each full device rescan.
  - Return error status if vgchange fails to activate any volume.


author: Alasdair Kergon <agk@redhat.com> - 2.02.57-1
changelog:
  - Add --splitmirrors to lvconvert to split off part of a mirror.
  - Allow vgremove to remove a VG with PVs missing after a prompt.
  - Add activation/udev_rules config option in lvm.conf.
  - Add --poll flag to vgchange and lvchange to control background daemon launch.
  - Impose limit of 8 mirror images to match the in-kernel kcopyd restriction.
  - Log failure type and recognise type 'F' (flush) in dmeventd mirror plugin.
  - Add --noudevrules option for dmsetup to disable /dev node management by udev.
  - Fix 'dmsetup info -c -o all' to show all fields.
  - Fix coredump and memory leak for 'dmsetup help -c'.
  - Rename mirror_device_fault_policy to mirror_image_fault policy.
  - Use extended status of new kernel snapshot target 1.8.0 to detect when empty.
  - Allow use of precommitted metadata when a PV is missing.
  - Add global/abort_on_internal_errors to lvm.conf to assist testing.
  - If aborting due to internal error, always send that message to stderr.
  - Keep log type consistent when changing mirror image count.
  - Exit with success in lvconvert --repair --use-policies on failed allocation.
  - Ensure any background daemon exits without duplicating parent's functionality.
  - Change background daemon process names to "(lvm2)".
  - Fix internal lock state after forking.
  - Remove empty PV devices if lvconvert --repair is using defined policies.
  - Use fixed buffer to prevent stack overflow in persistent filter dump.
  - Propagate metadata commit and revert notifications to other cluster nodes.
  - Fix metadata caching and lock state propagation to remote nodes in clvmd.
  - Properly decode all flags in clvmd messages including VG locks.
  - Drop cached metadata after device was auto-repaired and removed from VG.
  - Clear MISSING_PV flag if PV reappeared and is empty.
  - Fix removal of multiple devices from a mirror.
  - Also clean up PVs flagged as missing in vgreduce --removemissing --force.
  - Fix some pvresize and toollib error paths with missing VG releases/unlocks.
  - Explicitly call suspend for temporary mirror layer.
  - Add memlock information to do_lock_lv debug output.
  - Always bypass calls to remote cluster nodes for non-clustered VGs.
  - Permit implicit cluster lock conversion in pre/post callbacks on local node.
  - Permit implicit cluster lock conversion to the lock mode already held.
  - Fix lock flag masking in clvmd so intended code paths get invoked.
  - Remove newly-created mirror log from metadata if initial deactivation fails.
  - Improve pvmove error message when all source LVs are skipped.
  - Fix memlock imbalance in lv_suspend if already suspended.
  - Fix pvmove test mode not to poll (and fail).
  - Fix vgcreate error message if VG already exists.
  - Fix tools to use log_error when aborted due to user response to prompt.
  - Fix ignored readahead setting in lvcreate --readahead.
  - Fix clvmd memory leak in lv_info_by_lvid by calling release_vg.
  - If LVM_UDEV_DISABLE_CHECKING is set in environment, disable udev warnings.
  - If DM_UDEV_DISABLE_CHECKING is set in environment, disable udev warnings.
  - Always set environment variables for an LVM2 device in 11-dm-lvm.rules.
  - Disable udev rules for change events with DISK_RO set.
  - Add dm_tree_add_dev_with_udev_flags to provide wider support for udev flags.
  - Correct activated or deactivated text in vgchange summary message.
  - Fix fsadm man page typo (fsdam).


author: Alasdair Kergon <agk@redhat.com> - 2.02.58-1
changelog:
  - Fix clvmd automatic target module loading crash.
  - Fix allocation code not to stop at the first area of a PV that fits.
  - Add support for the "snapshot-merge" kernel target (2.6.33-rc1).
  - Add --merge to lvconvert to merge a snapshot into its origin.


author: Alasdair Kergon <agk@redhat.com> - 2.02.59-1
changelog:
  - Add cmirror subpackage for clustered mirrors.
  - Set 'preferred_names' in default lvm.conf.
  - Add libdevmapper-event-lvm2.so to serialise dmeventd plugin liblvm2cmd use.
  - Stop dmeventd trying to access already-removed snapshots.
  - Fix clvmd to never scan suspended devices.
  - Fix detection of completed snapshot merge.
  - Improve snapshot merge metadata import validation.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 2.02.59-2
changelog:
  - Drop duplicated BuildRequires on openaislib-devel.
  - Drop Requires on clusterlib for cmirror subpackage.
  - clvmd subpackage should Requires cman (#506592).


author: Alasdair Kergon <agk@redhat.com> - 2.02.59-3
changelog:
  - Fix dmeventd lvm2 wrapper (plug-ins unusable in last build).
  - Make failed locking initialisation messages more descriptive.


author: Alasdair Kergon <agk@redhat.com> - 2.02.60-4
changelog:
  - Extend cmirrord man page.
  - Sleep before first progress check iff pvmove/lvconvert interval has prefix '+'.
  - Fix cmirror initscript syntax problems.
  - Fix first syslog message prefix for dmeventd plugins.
  - Make failed locking initialisation messages more descriptive.


author: Alasdair Kergon <agk@redhat.com> - 2.02.61-1
changelog:
  - Add %ORIGIN support to lv{create,extend,reduce,resize} --extents.
  - Accept a list of LVs with 'lvconvert --merge @tag' using process_each_lv.
  - Remove false "failed to find tree node" error when activating merging origin.
  - Exit with success when lvconvert --repair --use-policies performs no action.
  - Avoid unnecessary second resync when adding mimage to core-logged mirror.
  - Make clvmd -V return status zero.
  - Fix cmirrord segfault in clog_cpg list processing when converting mirror log.
  - Deactivate temporary pvmove mirror cluster-wide when activating it fails.
  - Add missing metadata vg_reverts in pvmove error paths.
  - Unlock shared lock in clvmd if activation calls fail.
  - Add lvm_pv_get_size, lvm_pv_get_free and lvm_pv_get_dev_size to lvm2app.
  - Change lvm2app to return all sizes in bytes as documented (not sectors).
  - Exclude internal VG names and uuids from lists returned through lvm2app.
  - Add LVM_SUPPRESS_LOCKING_FAILURE_MESSAGES environment variable.
  - Add DM_UDEV_DISABLE_LIBRARY_FALLBACK udev flag to rely on udev only.
  - Remove hard-coding that skipped _mimage devices from 11-dm-lvm.rules.
  - Export dm_udev_create_cookie function to create new cookies on demand.
  - Add --udevcookie, udevcreatecookie and udevreleasecookie to dmsetup.
  - Set udev state automatically instead of using DM_UDEV_DISABLE_CHECKING.
  - Set udev state automatically instead of using LVM_UDEV_DISABLE_CHECKING.
  - Remove pointless versioned symlinks to dmeventd plugin libraries.


author: Alasdair Kergon <agk@redhat.com> - 2.02.62-1
changelog:
  - Rewrite clvmd init script.
  - Add default alternative to mlockall using mlock to reduce pinned memory size.
  - Add use_mlockall and mlock_filter to activation section of lvm.conf.
  - Handle misaligned devices that report alignment_offset of -1.
  - Extend core allocation code in preparation for mirrored log areas.
  - No longer fall back to looking up active devices by name if uuid not found.
  - Don't touch /dev in vgmknodes if activation is disabled.
  - Add --showkeys parameter description to dmsetup man page.
  - Add --help option as synonym for help command.
  - Add lvm2app functions lvm_{vg|lv}_{get|add|remove}_tag() functions.
  - Refactor snapshot-merge deptree and device removal to support info-by-uuid.


author: Alasdair Kergon <agk@redhat.com> - 2.02.63-1
changelog:
  - Move development links to shared objects to /usr (hard-coded temporarily).
  - Change libdevmapper deactivation to fail if device is open.
  - Wipe memory buffers for libdevmapper dm-ioctl parameters before releasing.
  - Strictly require libudev if udev_sync is used.
  - Add support for ioctl's DM_UEVENT_GENERATED_FLAG.
  - Allow incomplete mirror restore in lvconvert --repair upon insufficient space.
  - Do not reset position in metadata ring buffer on vgrename and vgcfgrestore.
  - Allow VGs with active LVs to be renamed.
  - Only pass visible LVs to tools in cmdline VG name/tag expansions without -a.
  - Use C locale and mlockall in clvmd and dmeventd.
  - Mask LCK_HOLD in cluster VG locks for upgrade compatibility with older clvmd.
  - Add activation/polling_interval to lvm.conf as --interval default.
  - Don't ignore error if resuming any LV fails when resuming groups of LVs.
  - Skip closing persistent filter cache file if open failed.
  - Permit mimage LVs to be striped in lvcreate, lvresize and lvconvert.
  - Fix pvmove allocation to take existing parallel stripes into account.
  - Fix incorrect removal of symlinks after LV deactivation fails.
  - Fix is_partitioned_dev not to attempt to reopen device.
  - Fix another thread race in clvmd.
  - Improve vg_validate to detect some loops in lists.
  - Change most remaining log_error WARNING messages to log_warn.
  - Always use blocking lock for VGs and orphan locks.
  - Allocate all memory for segments from private VG mempool.
  - Optimise searching PV segments for seeking the most recently-added.
  - Remove duplicated vg_validate checks when parsing cached metadata.
  - Use hash table of LVs to speed up parsing of text metadata with many LVs.
  - Fix two vg_validate messages, adding whitespace and parentheses.
  - When dmeventd is not forking because of -d flag, don't kill parent process.
  - Fix dso resource leak in error path of dmeventd.
  - Fix --alloc contiguous policy only to allocate one set of parallel areas.
  - Do not allow {vg|lv}change --ignoremonitoring if on clustered VG.
  - Add ability to create mirrored logs for mirror LVs.
  - Fix clvmd cluster propagation of dmeventd monitoring mode.
  - Allow ALLOC_ANYWHERE to split contiguous areas.
  - Add some assertions to allocation code.
  - Introduce pv_area_used into allocation algorithm and add debug messages.
  - Add activation/monitoring to lvm.conf.
  - Add --monitor and --ignoremonitoring to lvcreate.
  - Don't allow resizing of internal logical volumes.
  - Fix libdevmapper-event pkgconfig version string to match libdevmapper.
  - Avoid scanning all pvs in the system if operating on a device with mdas.
  - Disable long living process flag in lvm2app library.
  - Fix pvcreate device md filter check.
  - Suppress repeated errors about the same missing PV uuids.
  - Bypass full device scans when using internally-cached VG metadata.
  - Only do one full device scan during each read of text format metadata.
  - Look up missing PVs by uuid not dev_name in pvs to avoid invalid stat.


author: Alasdair Kergon <agk@redhat.com> - 2.02.63-2
changelog:
  - Remove 'lvmconf --lockinglibdir' from cluster post: locking is now built-in.
  - Move libdevmapper-event-lvm2.so to devel package.
  - Explicitly specify libdevmapper-event.so* attributes.
  - Drop support for upgrades from very old versions that used lvm not lvm2.
  - Move libdevmapper-event plug-in libraries into new device-mapper subdirectory.
  - Don't verify lvm.conf contents when using rpm --verify.


author: Alasdair Kergon <agk@redhat.com> - 2.02.64-1
changelog:
  - Avoid pointless initialisation when the 'version' command is run directly.
  - Fix memory leak for invalid regex pattern input.
  - Display invalid regex pattern for filter configuration in case of error.
  - Fix -M and --type to use strings, not pointers that change on config refresh.
  - Fix lvconvert error message when existing mirrored LV is not found.
  - Set appropriate udev flags for reserved LVs.
  - Disallow the direct removal of a merging snapshot.
  - Don't preload the origin when removing a snapshot whose merge is pending.
  - Disallow the addition of mirror images while a conversion is happening.
  - Disallow primary mirror image removal when mirror is not in-sync.
  - Remove obsolete --name parameter from vgcfgrestore.
  - Add -S command to clvmd to restart the daemon preserving exclusive locks.
  - Increment lvm2app version from 1 to 2 (memory allocation changes).
  - Change lvm2app memory alloc/free for pv/vg/lv properties.
  - Change daemon lock filename from lvm2_monitor to lvm2-monitor for consistency.
  - Add support for new IMPORT{db} udev rule.
  - Add DM_UDEV_PRIMARY_SOURCE_FLAG udev flag to recognize proper DM events.
  - Also include udev libs in libdevmapper.pc.
  - Cache bitset locations to speed up _calc_states.
  - Add a regex optimisation pass for shared prefixes and suffixes.
  - Add dm_bit_and and dm_bitset_equal to libdevmapper.
  - Speed up dm_bit_get_next with ffs().


author: Alasdair Kergon <agk@redhat.com> - 2.02.65-1
changelog:
  - Disallow vgchange --clustered if there are active mirrors or snapshots.
  - Fix truncated total size displayed by pvscan.
  - Skip internal lvm devices in scan if ignore_suspended_devices is set.
  - Do not merge old device cache after we run full scan. (2.02.56)
  - Add new --sysinit compound option to vgchange and lvchange.
  - Fix clvmd init script never to deactivate non-clustered volume groups.
  - Drop duplicate errors for read failures and missing devices to verbose level.
  - Do not print encryption key in message debug output (cryptsetup luksResume).
  - Use -d to control level of messages sent to syslog by dmeventd.
  - Change -d to -f to run dmeventd in foreground.
  - Fix udev flags on remove in create_and_load error path.
  - Add dm_list_splice() function to join two lists together.
  - Use /bin/bash for scripts with bashisms.
  - Switch Libs.private to Requires.private in devmapper.pc and lvm2app.pc.
  - Use pkgconfig Requires.private for devmapper-event.pc.


author: Alasdair Kergon <agk@redhat.com> - 2.02.66-2
changelog:
  - Simplify and fix Requires package headers.
  - If unable to obtain snapshot percentage leave value blank on reports.
  - Use new install_system_dirs and install_initscripts makefile targets.
  - Add lvm2app functions to lookup a vgname from a pvid and pvname.
  - Change internal processing of PVs in pvchange.
  - Validate internal lock ordering of orphan and VG_GLOBAL locks.


author: Alasdair Kergon <agk@redhat.com> - 2.02.67-1
changelog:
  - Require partial option in lvchange --refresh for partial LVs.
  - Don't merge unchanged persistent cache file before dumping if tool scanned.
  - Avoid selecting names under /dev/block if there is an alternative.
  - Fix semctl parameter (union) to avoid misaligned parameter on some arches.
  - Fix clvmd initscript restart command to start clvmd if not yet running.
  - Handle failed restart of clvmd using -S switch properly.
  - Use built-in absolute paths in clvmd (clvmd restart and PV and LV queries).
  - Consistently return ECMD_FAILED if interrupted processing multiple LVs.
  - Add --type parameter description to the lvcreate man page.
  - Document 'clear' in dmsetup man page.
  - Replace strncmp kernel version number checks with proper ones.
  - Update clustered log kernel module name to log-userspace for 2.6.31 onwards.
  - Support autoloading of dm-mod module for kernels from 2.6.35.
  - Add dm_tree_node_set_presuspend_node() to presuspend child when deactivating.
  - Do not fail lvm_init() if init_logging() or _init_rand() generates an errno.
  - Fix incorrect memory pool deallocation while using vg_read for files.


author: Alasdair Kergon <agk@redhat.com> - 2.02.68-1
changelog:
  - Have device-mapper-libs require device-mapper (circular) for udev rules.
  - Clear exec_prefix.
  - Use early udev synchronisation and update of dev nodes for clustered mirrors.
  - Add lv_path to reports to offer full /dev pathname.
  - Avoid abort when generating cmirror status.
  - Fix clvmd initscript status to print only active clustered LVs.
  - Fix segfault in clvmd -R if no response from daemon received.
  - Honour log argument when down-converting stacked mirror.
  - Sleep to workaround clvmd -S race: socket closed early and server drops cmd.
  - Exit successfully when using -o help (but not -o +help) with LVM reports.
  - Add man pages for lvmconf, dmeventd and non-existent lvmsadc and lvmsar tools.
  - Add --force, --nofsck and --resizefs to lvresize/extend/reduce man pages.
  - Fix lvm2cmd example in documentation.
  - Fix typo in warning message about missing device with allocated data areas.
  - Add device name and offset to raw_read_mda_header error messages.
  - Allow use of lvm2app and lvm2cmd headers in C++ code.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.68-2
changelog:
  - Fix udev rules to handle spurious events properly.
  - Add Requires: udev >= 158-1 (needed for the change in udev rules).


author: Alasdair Kergon <agk@redhat.com> - 2.02.69-1
changelog:
  - Fix vgremove to allow removal of VG with missing PVs. (2.02.52)
  - Add metadata/vgmetadatacopies to lvm.conf.
  - Add --metadataignore to pvcreate and vgextend.
  - Add vg_mda_copies, pv_mda_used_count and vg_mda_used_count to reports.
  - Describe --vgmetadatacopies in lvm.conf and other man pages.
  - Add --[vg]metadatacopies to select number of mdas to use in a VG.
  - Make the metadata ignore bit control read/write metadata areas in a PV.
  - Add pvchange --metadataignore to set or clear a metadata ignore bit.
  - Refactor metadata code to prepare for --metadataignore / --vgmetadatacopies.
  - Ensure region_size of mirrored log does not exceed its full size.
  - Preload libc locale messages to prevent reading it in memory locked state.
  - Fix handling of simultaneous mirror image and mirrored log image failure.


author: Alasdair Kergon <agk@redhat.com> - 2.02.70-1
changelog:
  - Remove log directly if all mirror images of a mirrored log fail.
  - Randomly select which mdas to use or ignore.
  - Add printf format attributes to yes_no_prompt and fix a caller.
  - Always pass unsuspended dm devices through persistent filter to other filters.
  - Move test for suspended dm devices ahead of other filters.
  - Fix another segfault in clvmd -R if no response from daemon received. (2.02.68)
  - Remove superfluous suspended device counter from clvmd.
  - Fix lvm shell crash when input is entirely whitespace.
  - Update partial mode warning message.
  - Preserve memlock balance in clvmd when activation triggers a resume.
  - Restore the removemissing behaviour of lvconvert --repair --use-policies.


author: Alasdair Kergon <agk@redhat.com> - 2.02.71-1
changelog:
  - Make vgck warn about missing PVs.
  - Revert failed table load preparation after "create, load and resume".
  - Check if cluster log daemon is running before allowing cmirror create.
  - Add dm_create_lockfile to libdm and use for pidfiles for all daemons.
  - Correct LV list order used by lvconvert when splitting a mirror.
  - Check if LV with specified name already exists when splitting a mirror.
  - Fix suspend/resume logic for LVs resulting from splitting a mirror.
  - Fix possible hang when all mirror images of a mirrored log fail.
  - Adjust auto-metadata repair and caching logic to try to cope with empty mdas.
  - Update pvcreate, {pv|vg}change, and lvm.conf man pages about metadataignore.
  - Prompt if metadataignore with vgextend or pvchange would adjust vg_mda_copies.
  - Adjust vg_mda_copies if metadataignore given with vgextend or pvchange.
  - Speed up the regex matcher.
  - Use "nowatch" udev rule for inappropriate devices.
  - Document LVM fault handling in lvm_fault_handling.txt.
  - Clarify help text for vg_mda_count.
  - Add more verbose messages while checking volume_list and hosttags settings.
  - Add log_error when strdup fails in {vg|lv}_change_tag().
  - Do not log backtrace in valid _lv_resume() code path.


author: Alasdair Kergon <agk@redhat.com> - 2.02.72-3
changelog:
  - Address lvm2-cluster security flaw CVE-2010-2526.
      https://bugzilla.redhat.com/CVE-2010-2526
  - Change clvmd to communicate with lvm2 via a socket in /var/run/lvm.
  - Return controlled error if clvmd is run by non-root user.
  - Never use clvmd singlenode unless explicitly requested with -Isinglenode.
  - Fix exported_symbols generation to use standard compiler arguments.
  - Use #include <> not "" in lvm2app.h which gets installed on the system.
  - Make liblvm.device-mapper wait for include file generation.
  - Fix configure to supply DEFAULT_RUN_DIR to Makefiles.
  - Fix wrong number of mirror log at allocate policy


author: Alasdair Kergon <agk@redhat.com> - 2.02.73-1
changelog:
  - Change default alignment of data extents to 1MB.
  - Add --norestorefile option to pvcreate.
  - Require --restorefile when using pvcreate --uuid.
  - Fix potential for corruption during cluster mirror device failure.
  - Ignore snapshots when performing mirror recovery beneath an origin.
  - Monitor origin -real device below snapshot instead of overlay device.
  - Don't really change monitoring status when in test mode.
  - Fix some exit statuses when starting/stopping monitoring fails.
  - Enable snapshot monitoring by default when dmeventd is enabled.
  - Fix 'lvconvert --splitmirrors' in cluster operation.
  - Fix clvmd init script exit code to return 4 when executed as non-root user.
  - Recognise and give preference to md device partitions (blkext major).
  - Never scan internal LVM devices.
  - Don't ignore user-specified PVs in split-mirror operations. (2.02.71)
  - Fix data corruption bug in cluster mirrors.
  - Require logical volume(s) to be explicitly named for lvconvert --merge.
  - Avoid changing aligned pe_start as a side-effect of a log message.
  - Use built-in rule for device aliases: block/ < dm- < disk/ < mapper/ < other.
  - Handle failure of all mirrored log devices and all but one mirror leg. 
  - Disallow 'mirrored' log type for cluster mirrors.
  - Fix configure to supply DEFAULT_RUN_DIR to Makefiles.
  - Fix allocation of wrong number of mirror logs with 'remove' fault policy.
  - Add dmeventd/executable to lvm.conf to test alternative dmeventd.
  - Fix udev rules to support udev database content generated by older rules.
  - Reinstate detection of inappropriate uevent with DISK_RO set and suppress it.
  - Fix regex ttree off-by-one error.
  - Fix segfault in regex matcher with characters of ordinal value > 127.
  - Wait for node creation before displaying debug info in dmsetup.
  - Fix return status 0 for "dmsetup info -c -o help".


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.73-2
changelog:
  - Add configure --with-default-data-alignment.
  - Update heuristic used for default and detected data alignment.
  - Add "devices/default_data_alignment" to lvm.conf.


author: Alasdair Kergon <agk@redhat.com> - 2.02.74-1
changelog:
  - Fix the way regions are marked complete to avoid slow --nosync cmirror I/O.
  - Add DM_REPORT_FIELD_TYPE_ID_LEN to libdevmapper.h.
  - Allow : and @ to be escaped with \ in device names of PVs.
  - Avoid stack corruption when reading in large metadata.
  - Fix partial mode operations for lvm1 metadata format.
  - Track recursive filter iteration to avoid refreshing while in use. (2.02.56)
  - Allocate buffer for metadata tags dynamically to remove 4k limit.
  - Add random suffix to archive file names to prevent races when being created.
  - Reinitialize archive and backup handling on toolcontext refresh.
  - Make poll_mirror_progress report PROGRESS_CHECK_FAILED if LV is not a mirror.
  - Like mirrors, don't scan origins if ignore_suspended_devices() is set.
  - Automatically generate tailored LSB Requires-Start for clvmd init script.
  - Fix return code of pvmove --abort PV.
  - Fix pvmove --abort to remove even for empty pvmove LV.
  - Add implementation for simple numeric 'get' property functions.
  - Simplify MD/swap signature detection in pvcreate and allow aborting.
  - Allow --yes to be used without --force mode.
  - Fix file descriptor leak in swap signature detection error path.
  - Detect and allow abort in pvcreate if LUKS signature is detected.


author: Alasdair Kergon <agk@redhat.com> - 2.02.73-3
changelog:
  - Add --setuuid to dmsetup rename.
  - Add dm_task_set_newuuid to set uuid of mapped device post-creation.


author: Alasdair Kergon <agk@redhat.com> - 2.02.75-1
changelog:
  - Fix pthread mutex usage deadlock in clvmd.
  - Avoid segfault by limiting partial mode for lvm1 metadata. (2.02.74)
  - Skip dm devices in scan if they contain only error targets or are empty.
  - Don't take write lock in vgchange --refresh, --poll or --monitor.
  - Fix hang when repairing a mirrored-log that had both devs fail.
  - Speed up unquoting of quoted double quotes and backslashes.
  - Speed up CRC32 calculations by using a larger lookup table.
  - Implement dmeventd -R to restart without state loss.
  - Add --setuuid to dmsetup rename.
  - Add global/metadata_read_only to use unrepaired metadata in read-only cmds.
  - Automatically extend snapshots with dmeventd according to policy in lvm.conf.
  - Add activation/snapshot_autoextend_threshold/percent to lvm.conf.
  - Add devices/disable_after_error_count config to limit access to failing devs.
  - Implement vgextend --restoremissing to reinstate missing devs that return.
  - Read whole /proc/self/maps file before working with maps entries.
  - Convey need for snapshot-merge target in lvconvert error message and man page.
  - Give correct error message when creating a too-small snapshot.
  - Make lvconvert respect --yes and --force when converting an inactive log.
  - Better support of noninteractive shell execution of fsadm.
  - Fix usage of --yes flag for ReiserFS resize in fsadm.
  - Fix detection of mounted filesystems for fsadm when udev is used.
  - Fix assignment of default value to LVM variable in fsadm.
  - Fix support for --yes flag for fsadm.
  - Do not execute lvresize from fsadm --dry-run.
  - Fix fsadm return error code from user's break action.
  - Return const pointer from dm_basename() in libdevmapper.
  - Add dm_zalloc and use it and dm_pool_zalloc throughout.
  - Add dm_task_set_newuuid to set uuid of mapped device post-creation.
  - Fix missing variable initialization in cluster_send() function from cmirrord.
  - Fix pointer for VG name in _pv_resize_single error code path.
  - Fix vg_read memory leak with directory-based metadata.
  - Fix memory leak of config_tree in reinitialization code path.
  - Fix pool destruction order in dmeventd_lvm2_exit() to avoid leak debug mesg.
  - Remove dependency on libm by replacing floor() by an integer-based algorithm.
  - Refactor and add 'get' functions for pv, vg and lv properties/fields.
  - Add pv_get_property and create generic internal _get_property function.
  - Make generic GET_*_PROPERTY_FN macros with secondary macro for vg, pv & lv.


author: Alasdair Kergon <agk@redhat.com> - 2.02.76-1
changelog:
  - Clarify error messages when activation fails due to activation filter use.
  - Fix handling of online filesystem resize (using new fsadm return code).
  - Modify fsadm to return different status code for check of mounted filesystem.
  - Add DIAGNOSTICS section to fsadm man page.
  - Update VG metadata only once in vgchange when making multiple changes.
  - Allow independent vgchange arguments to be used together.
  - Fix vgchange to process -a, --refresh, --monitor and --poll like lvchange.
  - Add dmeventd -R to restart dmeventd without losing monitoring state. (1.02.56)
  - Automatically unmount invalidated snapshots in dmeventd.
  - Add lvm2app functions to query any pv, vg, or lv property / report field.
  - Fix a deadlock caused by double close in clvmd.
  - Fix NULL pointer dereference on too-large MDA error path in _vg_read_raw_area.
  - Fix regex optimiser not to ignore RHS of OR nodes in _find_leftmost_common.
  - Fix memory leak of field_id in _output_field function.
  - Allocate buffer for reporting functions dynamically to support long outputs.


author: Alasdair Kergon <agk@redhat.com> - 2.02.77-1
changelog:
  - Add PV and LV segment types and functions to liblvm.
  - Add set_property functions to liblvm.
  - Remove tag length restriction and allow / = ! : # & characters.
  - Support repetition of --addtag and --deltag arguments.
  - Add infrastructure for specific cmdline arguments to be repeated in groups.
  - Fix fsadm no longer to require '-f' to resize an unmounted filesystem.
  - Fix fsadm to detect mounted filesystems on older systems. (2.0.75)
  - Extend cling allocation policy to recognise PV tags (cling_by_tags).
  - Add allocation/cling_tag_list to lvm.conf.


author: Alasdair Kergon <agk@redhat.com> - 2.02.78-1
changelog:
  - Miscellaneous error path corrections and minor leaks fixed.
  - Avoid misleading PV missing warnings in vgextend --restoremissing.
  - Ignore unrecognised allocation policy found in metadata instead of aborting.
  - Disallow lvconvert ops that both allocate & free supplied PEs in a single cmd.
  - Fix liblvm seg_size to give bytes not sectors.
  - Add functions to look up LV/PV by name/uuid to liblvm.
  - Suppress 'No PV label' message when removing several PVs without mdas.
  - Fix default /etc/lvm permissions to be 0755. (2.02.66)


author: Alasdair Kergon <agk@redhat.com> - 2.02.79-1
changelog:
  - Create /var/run/lvm directory during clvmd initialisation if missing.
  - Avoid revalidating the label cache immediately after scanning.
  - Support scanning for a single VG in independent mdas.
  - Don't skip full scan when independent mdas are present even if memlock is set.
  - Add copy_percent and snap_percent to liblvm.
  - Add new dm_prepare_selinux_context fn to libdevmapper and use it throughout.
  - Enhance vg_validate to ensure integrity of LV and PV structs referenced.
  - Enhance vg_validate to check composition of pvmove LVs.
  - Avoid writing to freed memory in vg_release.  (2.02.78)
  - Add missing test for reallocation error in _find_parallel_space().
  - Add checks for allocation errors in config node cloning.
  - Fix error path if regex engine cannot be created in _build_matcher().
  - Check read() and close() results in _get_cmdline().
  - Fix NULL pointer check in error path in clvmd do_command(). (2.02.78)
  - Check for unlink failure in remove_lockfile() in dmeventd.
  - Use dm_free for dm_malloc-ed areas in _clog_ctr/_clog_dtr in cmirrord.
  - Change dm_regex_create() API to accept const char * const *patterns.


author: Alasdair Kergon <agk@redhat.com> - 2.02.81-1
changelog:
  - Add disk to allowed mirrored log type conversions.
  - Accept fusion fio in device type filter.
  - Speed up command processing by caching resolved config tree.
  - Use same dm cookie for consecutive dm ops in same VG to reduce udev waits.
  - Do not scan devices in dev_reset_error_count() when forking.
  - Skip unnecessary LOCK_NULL unlock call during volume deactivation.
  - Skip fs_unlock when calling exec_cmd within activation code (for modprobe).
  - Replace fs_unlock by sync_local_dev_names to notify local clvmd. (2.02.80)
  - Fix wrongly paired unlocking of VG_GLOBAL in pvchange. (2.02.66)
  - Return 0 from cmirrord initscript 'start' if daemon is already running.
  - Add DM_COOKIE_AUTO_CREATE to libdevmapper.h.
  - Improve general lvconvert man page description.
  - Detect NULL handle in get_property().
  - Fix memory leak in persistent filter creation error path.
  - Check for errors setting up dm_task struct in _setup_task().
  - Fail polldaemon creation when lvmcache_init() fails.
  - Return PERCENT_INVALID for errors in _copy_percent() and _snap_percent().
  - Detect errors from dm_task_set calls in _get_device_info (dmeventd).
  - Fix memory leak in debug mode of restart_clvmd() error path.
  - Log error message for pthread_join() failure in clvmd.
  - Use tmpfiles.d/lvm2.conf to create /var/lock/lvm and /var/run/lvm at boot.
  - Require initscripts for tmpfiles.d/lvm2.conf.


author: Alasdair Kergon <agk@redhat.com> - 2.02.82-2
changelog:
  - Bring lvscan man page up-to-date.
  - Fix lvchange --test to exit cleanly.
  - Add change_tag to toollib.
  - Allow multiple pvchange command line options to be specified together.
  - Do not fail pvmove polling if another process cleaned up first.
  - Avoid clvmd incrementing dlm lockspace reference count more than once.
  - Add -f (don't fork) option to clvmd and fix clvmd -d<num> description.


author: Alasdair Kergon <agk@redhat.com> - 2.02.83-1
changelog:
  - Allow exclusive activation of snapshots in a cluster.
  - Don't lose LV exclusive lock state when suspending clustered devices.
  - Fix fs operation stack handling when multiple operations on same device.
  - Increase hash table sizes to 1024 LV names and 64 PV uuids.
  - When setting up mda wipe first 4k of it as was intended.
  - Remove unneeded checks for open_count in lv_info().
  - Synchronize with udev before checking open_count in lv_info().
  - Add "dmsetup ls --tree" output to lvmdump.
  - Fix udev synchronization with no-locking --sysinit (2.02.80).
  - Improve man page style consistency for pvcreate, pvremove, pvresize, pvscan.
  - Avoid rebuilding of uuid validation table.
  - Improve lvcreate error text from insufficient "extents" to "free space".
  - Always use O_DIRECT when opening block devices to check for partitioning.
  - Move creation of device nodes from 'create' to 'resume'.
  - Add --addnodeonresume and --addnodeoncreate options to dmsetup.
  - Add dm_task_set_add_node to libdevmapper to control dev node creation time.
  - Add dm_task_secure_data to libdevmapper to wipe ioctl buffers in kernel.
  - Log debug message when expected uevent is not generated.
  - Set DM_UDEV_DISABLE_OTHER_RULES_FLAG for suspended DM devices in udev rules.
  - Begin a new pool object for each row in _output_as_rows() correctly.


author: Alasdair Kergon <agk@redhat.com> - 2.02.84-1
changelog:
  - Fix big-endian CRC32 checksumming broken since 2.02.75.  If affected,
    ensure metadata backups in /etc/lvm/backup are up-to-date (vgcfgbackup)
    then after updating to 2.02.84 restore metadata from them (using pvcreate
    with -Zn --restorefile and -u if PVs can no longer be seen, then
    vgcfgrestore -f).
  - Reinstate libdevmapper DEBUG_MEM support. (Removed in 1.02.62.)


author: Milan Broz <mbroz@redhat.com> - 2.02.84-2
changelog:
  - Accept kernel 3.0 uname string in libdevmapper initialization.
  - Make systemd initscripts configurable.


author: Alasdair Kergon <agk@redhat.com> - 2.02.86-1
changelog:
  - Fix activation sequences to avoid trapped I/O with multiple LVs.
  - Fix activation sequences to avoid allocating tables while devs suspended.
  - Remove unnecessary warning in pvcreate for MD linear devices.
  - Add activation/checks to lvm.conf to perform additional ioctl validation.
  - Append 'm' attribute to pv_attr for missing PVs.
  - Fix to preserve exclusive activation of mirror while up-converting.
  - Reject allocation if number of extents is not divisible by area count.
  - Fix cluster mirror creation to work with new mirror allocation algorithm.
  - Ignore activation/verify_udev_operations if dm kernel driver vsn < 4.18.
  - Add activation/verify_udev_operations to lvm.conf, disabled by default.
  - Ignore inconsistent pre-commit metadata on MISSING_PV devs while activating.
  - Add proper udev library context initialization and finalization to liblvm.
  - Downgrade critical_section errors to debug level until it is moved to libdm.
  - Fix ignored background polling default in vgchange -ay.
  - Fix reduction of mirrors with striped segments to always align to stripe size.
  - Validate mirror segments size.
  - Fix extent rounding for striped volumes never to reduce more than requested.
  - Fix create_temp_name to replace any '/' found in the hostname with '?'.
  - Always use append to file in lvmdump. selinux policy may ban file truncation.
  - Propagate test mode to clvmd to skip activation and changes to held locks.
  - Permit --available with lvcreate so non-snapshot LVs need not be activated.
  - Clarify error message when unable to convert an LV into a snapshot of an LV.
  - Do not issue an error message when unable to remove .cache on read-only fs.
  - Avoid memlock size mismatch by preallocating stdio line buffers.
  - Report internal error if suspending a device using an already-suspended dev.
  - Report internal error if any table is loaded while any dev is known suspended.
  - Report error if a table load requiring target parameters has none supplied.
  - Add dmsetup --checks and dm_task_enable_checks framework to validate ioctls.
  - Add age_in_minutes parameter to dmsetup udevcomplete_all.
  - Disable udev fallback by default and add --verifyudev option to dmsetup.
  - Add dm_get_suspended_counter() for number of devs in suspended state by lib.
  - Fix "all" report field prefix matching to include label fields with pv_all.
  - Delay resuming new preloaded mirror devices with core logs in deptree code.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.86-2
changelog:
  - Add dm-event and lvm2-monitor unit files for use with systemd.
  - Add sysvinit subpackage for legacy SysV init script support.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.86-4
changelog:
  - Add support for systemd file descriptor handover to dmeventd.
  - Add support for new oom killer adjustment interface (oom_score_adj).


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.87-1
changelog:
  - Cache and share generated VG structs to improve performance.
  - Suppress locking error messages in monitoring init scripts.
  - Add global/detect_internal_vg_cache_corruption to lvm.conf.
  - If pipe in clvmd fails return busy instead of using uninitialised descriptors.
  - Initialise clvmd locks before lvm context to avoid open descriptor leaks.
  - Suppress low-level locking errors and warnings while using --sysinit.
  - Add test for fcntl error in singlenode client code.
  - Compare file size (as well as timestamp) to detect changed config file.
  - Change DEFAULT_UDEV_SYNC to 1 so udev_sync is used if there is no config file.
  - Update udev rules to skip DM flags decoding for removed devices.
  - Remove device name prefix from dmsetup line output if -j & -m or -u supplied.
  - Add new segtype 'raid' for MD RAID 1/4/5/6 support with dmeventd plugin.
  - Add ability to reduce the number of mirrors in raid1 arrays to lvconvert.
  - Add support for systemd file descriptor handover in dmeventd.
  - Add systemd unit file to provide lvm2 monitoring.
  - Add systemd unit files for dmeventd.
  - Use new oom killer adjustment interface (oom_score_adj) when available.
  - Fix read-only identical table reload supression.
  - Remove --force option from lvrename manpage.


author: Alasdair Kergon <agk@redhat.com> - 2.02.88-1
changelog:
  - Remove incorrect 'Breaking' error message from allocation code. (2.02.87)
  - Add lvconvert --merge support for raid1 devices split with --trackchanges.
  - Add --trackchanges support to lvconvert --splitmirrors option for raid1.
  - Add dm_tree_node_add_null_area for temporarily-missing raid devs tracked.
  - Support lvconvert of -m1 raid1 devices to a higher number.
  - Support splitting off a single raid1 rimage in lvconvert --splitmirrors.
  - Add -V as short form of --virtualsize in lvcreate.


author: Alasdair Kergon <agk@redhat.com> - 2.02.89-2
changelog:
  - New upstream release with experimental support for thinly-provisioned devices.
  - The changelog for this release is quite long and contained in 
    WHATS_NEW and WHATS_NEW_DM in the documentation directory.


author: Alasdair Kergon <agk@redhat.com> - 2.02.90-1
changelog:
  - Drop support for cman, openais and cmirror for f17. Require dlm not cluster.
  - Automatically detect whether corosync clvmd needs to use confdb or cmap.
  - Disable partial activation for thin LVs and LVs with all missing segments.
  - sync_local_dev_names before (re)activating mirror log for initialisation.
  - Do not print warning for pv_min_size between 512KB and 2MB.
  - Clean up systemd unit ordering and requirements.
  - Allow ALLOC_NORMAL to track reserved extents for log and data on same PV.
  - Fix data% report for thin volume used as origin for non-thin snapshot.


author: Alasdair Kergon <agk@redhat.com> - 2.02.92-1
changelog:
  - Read dmeventd monitoring config settings for every lvm command.
  - For thin devices, initialize monitoring only for thin pools not thin volumes.
  - Make conversion from a synced 'mirror' to 'raid1' not cause a full resync.
  - Add clvmd init dependency on dlm service when running with new corosync.
  - Switch to using built-in blkid in 13-dm-disk.rules.
  - Add "watch" rule to 13-dm-disk.rules.
  - Detect failing fifo and skip 20s retry communication period.
  - Replace any '\' char with '\\' in dm table specification on input.
  - New 'mangle' options in dmsetup/libdevmapper for transparent reversible 
    encoding of characters that udev forbids in device names.
  - Add --manglename option to dmsetup to select the name mangling mode.
  - Add mangle command to dmsetup to provide renaming to correct mangled form.
  - Add 'mangled_name' and 'unmangled_name' fields to dmsetup info -c -o.
  - Mangle device name on dm_task_set_name/newname call if necessary.
  - Add dm_task_get_name_mangled/unmangled to libdevmapper.
  - Add dm_set/get_name_mangling_mode to set/get name mangling in libdevmapper.


author: Alasdair Kergon <agk@redhat.com> - 2.02.93-1
changelog:
  - Moved systemd tmpfiles installation upstream for lvm2 lock and run dirs.
  - Require number of stripes to be greater than parity devices in higher RAID.
  - Fix allocation code to allow replacement of single RAID 4/5/6 device.
  - Check all tags and LV names are in a valid form before writing any metadata.
  - Allow 'lvconvert --repair' to operate on RAID 4/5/6.
  - Fix build_parallel_areas_from_lv to account correctly for raid parity devices.
  - Print message when faulty raid devices have been replaced.


author: Alasdair Kergon <agk@redhat.com> - 2.02.94-1
changelog:
  - Add support to execute thin_check with each de/active of thin pool.
  - Fix automatic estimation of metadata device size for thin pool.
  - Wipe initial 4KiB of non zeroed thin volumes.
  - Update code-base to incorporate new metadata daemon. (Not used in Fedora yet.)
  - Numerous minor cleanups across the code-base.
  - Fix dmsetup / dm_task_set_name to properly resolve path to dm name. (2.02.93)


author: Alasdair Kergon <agk@redhat.com> - 2.02.95-1
changelog:
  - If unspecified, adjust thin pool metadata and chunk size to fit into 128MB.
  - Deactivation of failed thin check on thin pool returns success.
  - Check for multiply-mangled names in auto mangling mode.
  - Fix dm_task_get_name_unmangled to not unmangle already unmangled name.
  - Check whether device names are properly mangled on ioctl return.


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 2.02.95-3
changelog:
  - Rebuild against new corosync (soname change).
  - BuildRequires and Requires on newer version of corosync.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-4
changelog:
  - Reinstate cmirror support.
  - Detect lvm binary path in lvmetad udev rules.
  - Use pvscan --cache instead of vgscan in systemd units/init scripts.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.95-7
changelog:
  - Use BuildRequires: systemd-devel instead of BuildRequires: libudev-devel.
  - Remove unsupported udev_get_dev_path libudev call used for checking udev dir.


author: Kay Sievers - 2.02.95-8
changelog:
  - Remove explicit Requires: libudev, rpm takes care of that:
      $ rpm -q --requires device-mapper | grep udev
      libudev.so...


author: Alasdair Kergon <agk@redhat.com> - 2.02.96-1
changelog:
  - Require device-mapper-persistent-data package for thin provisioning.
  - Set delay_resume_if_new on deptree snapshot origin.
  - Log value chosen in _find_config_bool like other variable types do.
  - Wait for dmeventd to exit after sending it DM_EVENT_CMD_DIE when restarting.
  - Append 'Used' to {Blk}DevNames/DevNos dmsetup report headers for clarity.
  - Remove dmeventd fifos on exit if they are not managed by systemd.
  - Use SD_ACTIVATION environment variable in systemd units to detect systemd.
  - Only start a new dmeventd instance on restart if one was already running.
  - Extend the time waited for input from dmeventd fifo to 5 secs. (1.02.73)
  - Fix error paths for regex filter initialization.
  - Re-enable partial activation of non-thin LVs until it can be fixed. (2.02.90)
  - Fix alloc cling to cling to PVs already found with contiguous policy.
  - Fix cling policy not to behave like normal policy if no previous LV seg.
  - Fix allocation loop not to use later policies when --alloc cling without tags.
  - Fix division by zero if PV with zero PE count is used during vgcfgrestore.
  - Add initial support for thin pool lvconvert.
  - Fix lvrename for thin volumes (regression in for_each_sub_lv). (2.02.89)
  - Fix up-convert when mirror activation is controlled by volume_list and tags.
  - Warn of deadlock risk when using snapshots of mirror segment type.
  - Fix bug in cmirror that caused incorrect status info to print on some nodes.
  - Remove statement that snapshots cannot be tagged from lvm man page.
  - Disallow changing cluster attribute of VG while RAID LVs are active.
  - Fix lvconvert error message for non-mergeable volumes.
  - Allow subset of failed devices to be replaced in RAID LVs.
  - Prevent resume from creating error devices that already exist from suspend.
  - Update and correct lvs man page with supported column names.
  - Handle replacement of an active device that goes missing with an error device.
  - Change change raid1 segtype always to request a flush when suspending.
  - Add udev info and context to lvmdump.
  - Add lvmetad man page.
  - Fix RAID device replacement code so that it works under snapshot.
  - Fix inability to split RAID1 image while specifying a particular PV.
  - Update man pages to give them all the same look&feel.
  - Fix lvresize of thin pool for striped devices.
  - For lvresize round upward when specifying number of extents.
  - For lvcreate with %FREE support rounding downward stripe alignment.
  - Change message severity to log_very_verbose for missing dev info in udev db.
  - Fix lvconvert when specifying removal of a RAID device other than last one.
  - Fix ability to handle failures in mirrored log in dmeventd plugin. (2.02.89)
  - Fix unlocking volume group in vgreduce in error path.
  - Cope when VG name is part of the supplied name in lvconvert --splitmirrors -n.
  - Fix exclusive lvchange running from other node. (2.02.89)
  - Add 'vgscan --cache' functionality for consistency with 'pvscan --cache'.
  - Keep exclusive activation in pvmove if LV is already active.
  - Disallow exclusive pvmove if some affected LVs are not exclusively activated.
  - Remove unused and wrongly set cluster VG flag from clvmd lock query command.
  - Fix pvmove for exclusively activated LV pvmove in clustered VG. (2.02.86)
  - Update and fix monitoring of thin pool devices.
  - Check hash insert success in lock_vg in clvmd.
  - Check for buffer overwrite in get_cluster_type() in clvmd.
  - Fix global/detect_internal_vg_cache_corruption config check.
  - Fix initializiation of thin monitoring. (2.02.92)
  - Cope with improperly formatted device numbers in /proc/devices. (2.02.91)
  - Exit if LISTEN_PID environment variable incorrect in lvmetad systemd handover.
  - Fix fsadm propagation of -e option.
  - Fix fsadm parsing of /proc/mounts files (don't check for substrings).
  - Fix fsadm usage of arguments with space.
  - Fix arg_int_value alongside ARG_GROUPABLE --major/--minor for lvcreate/change.
  - Fix name conflicts that prevent down-converting RAID1 when specifying a device
  - Improve thin_check option passing and use configured path.
  - Add --with-thin-check configure option for path to thin_check.
  - Fix error message when pvmove LV activation fails with name already in use.
  - Better structure layout for device_info in dev_subsystem_name().
  - Change message severity for creation of VG over uninitialised devices.
  - Fix error path for failed toolcontext creation.
  - Don't unlink socket on lvmetad shutdown if instantiated from systemd.
  - Restart lvmetad automatically from systemd if it exits from uncaught signal.
  - Fix warn msg for thin pool chunk size and update man for chunksize. (2.02.89)


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.96-2
changelog:
  - Compile with lvmetad support enabled.
  - Add support for volume autoactivation using lvmetad.
  - Update man pages with --activate ay option and auto_activation_volume_list.
  - Use vgchange -aay instead of vgchange -ay in clmvd init script.
  - Add activation/auto_activation_volume_list to lvm.conf.
  - Add --activate ay to lvcreate, lvchange, pvscan and vgchange.
  - Add --activate synonym for --available arg and prefer --activate.
  - Open device read-only to obtain readahead value.
  - Add configure --enable-udev-rule-exec-detection to detect exec path in rules.
  - Use sbindir in udev rules by default and remove executable path detection.
  - Remove hard-coded paths for dmeventd fifos and use default-dm-run-dir.
  - Add configure --with-lvmetad-pidfile to remove hard-coded value.
  - Add configure --with-default-pid-dir for common directory with pid files.
  - Add configure --with-default-dm-run-dir to set run directory for dm tools.
  - Add documentation references in systemd units.
  - Clean up spec file and keep support only for Fedora 17 upwards.


author: Alasdair Kergon <agk@redhat.com> - 2.02.97-1
changelog:
  - Improve documention of allocation policies in lvm.8.
  - Increase limit for major:minor to 4095:1048575 when using -My option.
  - Add generator for lvm2 activation systemd units.
  - Add lvm_config_find_bool lvm2app fn to retrieve bool value from config tree.
  - Respect --test when using lvmetad.
  - No longer capitalise first LV attribute char for invalid snapshots.
  - Allow vgextend to add PVs to a VG that is missing PVs.
  - Recognise Micron PCIe SSDs in filter and move array out to device-types.h.
  - Fix dumpconfig <node> to print only <node> without its siblings. (2.02.89)
  - Do not issue "Failed to handle a client connection" error if lvmetad killed.
  - Support lvchange --discards and -Z with thin pools.
  - Add discard LV segment field to reports.
  - Add --discards to lvcreate --thin.
  - Set discard and external snapshot features if thin pool target is vsn 1.1+.
  - Count percentage of completeness upwards not downwards when merging snapshot.
  - Skip activation when using vg/lvchange --sysinit -a ay and lvmetad is active.
  - Fix extending RAID 4/5/6 logical volumes
  - Fix test for PV with unknown VG in process_each_pv to ignore ignored mdas.
  - Fix _alloc_parallel_area to avoid picking already-full areas for raid devices.
  - Never issue discards when LV extents are being reconfigured, not deleted.
  - Allow release_lv_segment_area to fail as functions it calls can fail.
  - Fix missing sync of filesystem when creating thin volume snapshot.
  - Allow --noflush with dmsetup status and wait (for thin target).
  - Add dm_config_write_one_node to libdevmapper.
  - Add dm_vasprintf to libdevmapper.
  - Support thin pool message release/reserve_metadata_snap in libdevmapper.
  - Support thin pool discards and external origin features in libdevmapper.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-1
changelog:
  - Don't try to issue discards to a missing PV to avoid segfault.
  - Fix vgchange -aay not to activate non-matching LVs that follow a matching LV.
  - Fix lvchange --resync for RAID LVs which had no effect.
  - Add RAID10 support (--type raid10).
  - Introduce blkdeactivate script to deactivate block devs with dependencies.
  - Apply 'dmsetup mangle' for dm UUIDs besides dm names.
  - Use -q as short form of --quiet.
  - Suppress non-essential stdout with -qq.
  - Add log/silent to lvm.conf equivalent to -qq.
  - Add (p)artial attribute to lvs.
  - Implement devices/global_filter to hide devices from lvmetad.
  - Add lvmdump -l, to collect a state dump from lvmetad.
  - Add --discards to lvconvert.
  - Add support for lvcreate --discards.
  - Add --poolmetadata to lvconvert and support thin meta/data dev stacking.
  - Support creation of read-only thin volumes (lvcreate -p r).
  - Support changes of permissions for thin snapshot volumes.
  - Make lvremove ask before discarding data areas.
  - Prohibit not yet supported change of thin-pool to read-only.
  - Using autoextend percent 0 for thin pool fails 'lvextend --use-policies'.
  - Make vgscan --cache an alias for pvscan --cache.
  - Clear lvmetad metadata/PV cache before a rescan.
  - Fix a segmentation fault upon receiving a corrupt lvmetad response.
  - Give inconsistent metadata warnings in pvscan --cache.
  - Avoid overlapping locks that could cause a deadlock in lvmetad.
  - Fix memory leaks in libdaemon and lvmetad.
  - Optimize libdaemon logging for a fast no-output path.
  - Only create lvmetad pidfile when running as a daemon (no -f).
  - Warn if lvmetad is running but disabled.
  - Warn about running lvmetad with use_lvmetad = 0 in example.conf.
  - Update lvmetad help output (flags and their meaning).
  - Make pvscan --cache read metadata from LVM1 PVs.
  - Make libdaemon buffer handling asymptotically more efficient.
  - Make --sysinit suppress lvmetad connection failure warnings.
  - Prohibit usage of lvcreate --thinpool with --mirrors.
  - Fix lvm2api origin reporting for thin snapshot volume.
  - Add implementation of lvm2api function lvm_percent_to_float.
  - Allow non power of 2 thin chunk sizes if thin pool driver supports that.
  - Allow limited metadata changes when PVs are missing via [vg|lv]change.
  - Do not start dmeventd for lvchange --resync when monitoring is off.
  - Remove pvscan --cache from lvm2-lvmetad init script.
  - Remove ExecStartPost with pvscan --cache from lvm2-lvmetad.service.
  - Report invalid percentage for property snap_percent of non-snaphot LVs.
  - Disallow conversion of thin LVs to mirrors.
  - Fix lvm2api data_percent reporting for thin volumes.
  - Do not allow RAID LVs in a clustered volume group.
  - Enhance insert_layer_for_lv() with recursive rename for _tdata LVs.
  - Skip building dm tree for thin pool when called with origin_only flag.
  - Ensure descriptors 0,1,2 are always available, using /dev/null if necessary.
  - Use /proc/self/fd when available for closing opened descriptors efficiently.
  - Fix inability to create, extend or convert to a large (> 1TiB) RAID LV.
  - Update lvmetad communications to cope with clients using different filters.
  - Clear LV_NOSYNCED flag when a RAID1 LV is converted to a linear LV.
  - Disallow RAID1 upconvert if the LV was created with --nosync.
  - Depend on systemd-udev-settle in units generated by activation generator.
  - Disallow addition of RAID images until the array is in-sync.
  - Fix RAID LV creation with '--test' so valid commands do not fail.
  - Add lvm_lv_rename() to lvm2api.
  - Fix setvbuf code by closing and reopening stream before changing buffer.
  - Disable private buffering when using liblvm.
  - When private stdin/stdout buffering is not used always use silent mode.
  - Fix 32-bit device size arithmetic needing 64-bit casting throughout tree.
  - Fix dereference of NULL in lvmetad error path logging.
  - Fix buffer memory leak in lvmetad logging.
  - Correct the discards field in the lvs manpage (2.02.97).
  - Use proper condition to check for discards settings unsupported by kernel.
  - Reinstate correct default to ignore discards for thin metadata from old tools.
  - Issue error message when -i and -m args do not match specified RAID type.
  - Change lvmetad logging syntax from -ddd to -l {all|wire|debug}.
  - Add new libdaemon logging infrastructure.
  - Support unmount of thin volumes from pool above thin pool threshold.
  - Update man page to reflect that dm UUIDs are being mangled as well.
  - Add 'mangled_uuid' and 'unmangled_uuid' fields to dmsetup info -c -o.
  - Mangle device UUID on dm_task_set_uuid/newuuid call if necessary.
  - Add dm_task_get_uuid_mangled/unmangled to libdevmapper.
  - Always reset delay_resume_if_new flag when stacking thin pool over anything.
  - Don't create value for dm_config_node and require dm_config_create_value call.
  - Check for existing new_name for dmsetup rename.
  - Fix memory leak in dmsetup _get_split_name() error path.
  - Clean up spec file and keep support only for Fedora 18 upwards.
  - Use systemd macros in rpm scriptlets to set up systemd units.
  - Add Requires: bash >= 4.0 for blkdeactivate script.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-3
changelog:
  - Add lvm2-activation-generator systemd generator to automatically generate
    systemd units to activate LVM2 volumes even if lvmetad is not used.
    This replaces lvm activation part of the former fedora-storage-init
    script that was included in the initscripts package before.
  - Enable lvmetad - the LVM metadata daemon by default.
  - Exit pvscan --cache immediately if cluster locking used or lvmetad not used.
  - Don't use lvmetad in lvm2-monitor.service ExecStop to avoid a systemd issue.
  - Remove dependency on fedora-storage-init.service in lvm2 systemd units.
  - Depend on lvm2-lvmetad.socket in lvm2-monitor.service systemd unit.
  - Init lvmetad lazily to avoid early socket access on config overrides.
  - Hardcode use_lvmetad=0 if cluster locking used and issue a warning msg.
  - Fix dm_task_set_cookie to properly process udev flags if udev_sync disabled.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-6
changelog:
  - Synchronize with udev in pvscan --cache and fix dangling udev_sync cookies.
  - Fix autoactivation to not autoactivate VG/LV on each change of the PVs used.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.98-9
changelog:
  - Fix 'dmsetup splitname -o' to not fail if used without '-c' switch (1.02.68).
  - Close open dmeventd FIFO file descriptors on exec (FD_CLOEXEC).
  - Fix premature DM version checking which caused useless mapper/control access.
  - Recognize DM_DISABLE_UDEV environment variable for a complete fallback.
  - Do not verify udev operations if --noudevsync command option is used.
  - Fix blkdeactivate to handle nested mountpoints and mangled mount paths.
  - Fix a crash-inducing race condition in lvmetad while updating metadata.
  - Fix possible race while removing metadata from lvmetad.
  - Fix possible deadlock when querying and updating lvmetad at the same time.
  - Avoid a global lock in pvs when lvmetad is in use.
  - Fix crash in pvscan --cache -aay triggered by non-mda PV.
  - Fix lvm2app to return all property sizes in bytes.
  - Add lvm.conf option global/thin_disabled_features.
  - Add lvconvert support to swap thin pool metadata volume.
  - Implement internal function detach_pool_metadata_lv().
  - Fix lvm2app and return lvseg discards property as string.
  - Allow forced vgcfgrestore of lvm2 metadata with thin volumes.
  - Add lvm.conf thin pool defs thin_pool_{chunk_size|discards|zero}.
  - Support discards for non-power-of-2 thin pool chunks.
  - Support allocation of pool metadata with lvconvert command.
  - Move common functionality for thin lvcreate and lvconvert to toollib.
  - Use lv_is_active() instead of lv_info() call.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.99-1
changelog:
  -  o Features/Extensions/Additions:
  - Add support for poolmetadataspare LV, that will be used for pool recovery.
  - Improve activation order when creating thin pools in non-clustered VG.
  - Add lvm2-activation-net systemd unit to activate LVs on net-attached storage.
  - Automatically flag thin snapshots to be skipped during activation.
  - Add support for persistent flagging of LVs to be skipped during activation.
  - Make selected thinp settings customizable by a profile.
  - Support storing profile name in metadata for both VGs and LVs.
  - Add support for configuration profiles.
  - Add support for thin volumes in vgsplit.
  - Add lvresize support for online thin pool metadata volume resize.
  - Add detection for thin pool metadata resize kernel support.
  - Add vg->vg_ondisk / lv_ondisk() holding committed metadata.
  - Add detection of mounted fs also for vgchange deactivation.
  - Detect maximum usable size for snapshot for lvresize.
  - Improve RAID kernel status retrieval to include sync_action/mismatch_cnt.
  - Add external origin support for lvcreate.
  - Support automatic config validation.
  - Add PV header extension: extension version, flags and bootloader areas.
  - Initial support for lvconvert of thin external origin.
  - Improve activation code for better support of stacked devices.
  - vgimport '--force' now allows import of VGs with missing PVs.
  - Allow removal or replacement of RAID LV components that are error segments.
  - Make 'vgreduce --removemissing' able to handle RAID LVs with missing PVs.
  - Give precedence to EMC power2 devices with duplicate PVIDs.
  - Recognise Storage Class Memory (IBM S/390) devices in filter.
  - Recognise STEC skd devices in filter.
  - Recognise Violin Memory vtms devices in filter.
  - Automatically restore MISSING PVs with no MDAs.
  - Detect mounted fs also via reading /proc/self/mountinfo.
  -  o Command Interface/Options:
  - Support ARG_GROUPABLE with merge_synonym (for --raidwritemostly).
  - Add --ignoreactivationskip to lvcreate/vgchange/lvchange to ignore skip flag.
  - Add --setactivationskip to lvcreate/lvchange to set activation skip flag.
  - Add --type profilable to lvm dumpconfig to show profilable config settings.
  - Add --mergedconfig to lvm dumpconfig for merged --config/--profile/lvm.conf.
  - Support changing VG/LV profiles: vgchange/lvchange --profile/--detachprofile.
  - Add new --profile command line arg to select a configuration profile for use.
  - For creation of snapshot require size for at least 3 chunks.
  - Do not accept size parameters bigger then 16EiB.
  - Accept --yes in all commands so test scripts can be simpler.
  - Add lvcreate/lvchange --[raid]{min|max}recoveryrate for raid LVs.
  - Add lvchange --[raid]writemostly/writebehind support for RAID1
  - Add lvchange --[raid]syncaction for scrubbing of RAID LVs.
  - Add --validate option to lvm dumpconfig to validate current config on demand.
  - Add --ignoreadvanced and --ignoreunsupported switch to lvm dumpconfig.
  - Add --withcomments and --withversions switch to lvm dumpconfig.
  - Add --type {current|default|missing|new} and --atversion to lvm dumpconfig.
  - Add --bootloaderareasize to pvcreate and vgconvert to create bootloader area.
  - Do not take a free lv name argument for lvconvert --thinpool option.
  - Allow lvconvert --stripes/stripesize only with --mirrors/--repair/--thinpool.
  - Do not ignore -f in lvconvert --repair -y -f for mirror and raid volumes.
  - Support use of option --yes for lvchange --persistent.
  - Fix clvmd support for option -d and properly use its argument.
  -  o Reporting:
  - Issue an error msg if lvconvert --type used incorrectly with other options.
  - Use LOG_DEBUG/ERR msg severity instead default for lvm2-activation-generator.
  - Add LV report fields: raid_mismatch_count/raid_sync_action/raid_write_behind.
  - Add LV reporting fields raid_min_recovery_rate, raid_max_recovery_rate.
  - Add sync_percent as alias for copy_percent LV reporting field.
  - Add lv_ prefix to modules reporting field.
  - Use units B or b (never E) with no decimal places when displaying sizes < 1k.
  - List thin-pool and thin modules for thin volumes.
  - Add 's(k)ip activation' bit to lvs -o lv_attr to indicate skip flag attached.
  - Improve error loging when user tries to interrupt commands.
  - Add vgs/lvs -o vg_profile/lv_profile to report profiles attached to VG/LV.
  - Report lvs volume type 'e' with higher priority.
  - Report lvs volume type 'o' also for external origin volumes.
  - Report lvs target type 't' only for thin pools and thin volumes.
  - Add "active" LV reporting field to show activation state.
  - Add "monitor" segment reporting field to show dmevent monitoring status.
  - Add explicit message about unsupported pvmove for thin/thinpool volumes.
  - Add pvs -o pv_ba_start,pv_ba_size to report bootloader area start and size.
  - Fix pvs -o pv_free reporting for PVs with zero PE count.
  - Report blank origin_size field if the LV doesn't have an origin instead of 0.
  - Report partial and in-sync RAID attribute based on kernel status
  - Log output also to syslog when abort_on_internal_error is set.
  - Change lvs heading Copy% to Cpy%Sync and print RAID4/5/6 sync% there too.
  - Report error for nonexisting devices in dmeventd communication.
  - Reduce some log_error messages to log_warn where we don't fail.
  -  o Configuration:
  - Add activation/auto_set_activation_skip to control activation skip flagging.
  - Add default.profile configuration profile and install it on make install.
  - Add config/profile_dir to set working directory to load profiles from.
  - Use mirror_segtype_default if type not specified for linear->mirror upconvert.
  - Refine lvm.conf and man page documentation for autoactivation feature.
  - Override system's global_filter settings for vgimportclone.
  - Find newest timestamp of merged config files.
  - Add 'config' section to lvm.conf to set the way the LVM configuration is handled.
  - Add global/raid10_segtype_default to lvm.conf.
  - Accept activation/raid_region_size in preference to mirror_region_size config.
  - Add log/debug_classes to lvm.conf to control debug log messages.
  - Allow empty activation/{auto_activation|read_only|}_volume_list config option.
  - Relax ignore_suspended_devices to read from mirrors that don't have a device marked failed.
  -  o Documentation:
  - Add man page entries for profile configuration and related options.
  - Document lvextend --use-policies option in man.
  - Improve lvcreate, lvconvert and lvm man pages.
  -  o API/interfaces:
  - liblvm/python API: Additions: PV create/removal/resize/listing
  - liblvm/python API: Additions: LV attr/origin/Thin pool/Thin LV creation
  - Fix exported symbols regex for non-GNU busybox sed.
  - Add LV snapshot support to liblvm and python-lvm.
  - Remove python liblvm object. systemdir can only be changed using env var now.
  - Add dm_get_status_snapshot() for parsing snapshot status.
  - Append discards and read-only fields to exported struct dm_status_thin_pool.
  - Validate passed params to dm_get_status_raid/thin/thin_pool().
  - Add dm_mountinfo_read() for parsing /proc/self/mountinfo.
  - Add dm_config_write_{node_out/one_node_out} for enhanced config output.
  - Add dm_config_value_is_bool to check for boolean value in supported formats.
  - Add DM_ARRAY_SIZE public macro.
  - Add DM_TO_STRING public macro.
  - Implement ref-counting for parents in python lib.
  -  o Fixes (general):
  - Do not zero init 4KB of thin snapshot for non-zeroing thin pool (2.02.94).
  - Correct thin creation error paths.
  - Add whole log_lv and metadata_lv sub volumes when creating partial tree.
  - Properly use snapshot layer for origin which is also thin volume.
  - Avoid generating metadata backup when calling update_pool_lv().
  - Send thin messages also for active thin pool and inactive thin volume.
  - Avoid creation of multiple archives for one command.
  - Avoid flushing thin pool when just requesting transaction_id.
  - Fix use of too big chunks of memory when communication with lvmetad.
  - Also filter partitions on mpath components if multipath_component_detection=1.
  - Do not use persistent filter with lvmetad.
  - Move syslog code out of signal handle in dmeventd.
  - Fix lvresize --use-policies of VALID but 100% full snapshot.
  - Skip monitoring of snapshots that are already bigger then origin.
  - Refuse to init a snapshot merge in lvconvert if there's no kernel support.
  - Fix alignment of PV data area if detected alignment less than 1 MB (2.02.74).
  - Fix creation and removal of clustered snapshot.
  - Fix clvmd caching of metadata when suspending inactive volumes.
  - Fix lvmetad error path in lvmetad_vg_lookup() for null vgname.
  - Fix clvmd _cluster_request() return code in memory fail path.
  - Fix vgextend to not allow a PV with 0 MDAs to be used while already in a VG.
  - Fix PV alignment to incorporate alignment offset if the PV has zero MDAs.
  - Fix missing cleanup of flags when the LV is detached from pool.
  - Fix check for some forbidden discards conversion of thin pools.
  - Limit RAID device replacement to repair only if LV is not in-sync.
  - Disallow RAID device replacement or repair on inactive LVs.
  - Unlock vg mutex in error path when lvmetad tries to lock_vg.
  - Detect key string duplication failure in config_make_nodes_v in libdaemon.
  - Disallow pvmove on RAID LVs until they are addressed properly
  - Recognize DM_DISABLE_UDEV environment variable for a complete fallback.
  - When no --stripes argument is given when creating a RAID10 volume, default to 2 stripes.
  - Do not allow lvconvert --splitmirrors on RAID10 logical volumes.
  - Repair a mirrored log before the mirror itself when both fail.
  - Avoid trying to read a mirror that has a failed device in its mirrored log.
  - Fix segfault for truncated string token in config file after the first '"'.
  - Fix config node lookup inside empty sections to not return the section itself.
  - Fix parsing of 64bit snapshot status in dmeventd snapshot plugin.
  - Always return success on dmeventd -V command call.
  -  o Fixes (segfaults/crashes/deadlocks/races):
  - Fix segfault when reporting raid_syncaction for older kernels.
  - Fix vgcfgrestore crash when specified incorrect vg name.
  - Check for memory failure of dm_config_write_node() in lvmetad.
  - Prevent double free error after dmeventd call of _fill_device_data().
  -  o Fixes (resource leaks/memleaks):
  - Release memory allocated with _cached_info().
  - Release memory and unblock signals in lock_vol error path.
  - Fix memory resource leak in memlocking error path.
  - Fix memleak in dmeventd thin plugin in device list obtaining err path.
  - Fix socket leak on error path in lvmetad's handle_connect.
  - Fix memleak on error path for lvmetad's pv_found.
  - Fix memleak in device_is_usable mirror testing function.
  - Fix memory leak on error path for pvcreate with invalid uuid.
  - Fix resource leak in error path of dmeventd's umount of thin volume.
  -  o Testing:
  - Fix test for active snapshot in cluster before resizing it.
  - Add python-lvm unit test case
  -  o Other:
  - Use local activation for clearing snapshot COW device.
  - Add configure --with-default-profile-subdir to select dir to keep profiles in.
  - Creation of snapshot takes at most 100% origin coverage.
  - Use LC_ALL to set locale in daemons and fsadm instead of lower priority LANG.
  - Optimize out setting the same value of read_ahead.
  - Automatically deactivate failed preloaded dm tree node.
  - Process thin messages once to active thin pool target for dm_tree.
  -  o Packaging:
  - Add /etc/lvm/profile dir and /etc/lvm/profile/default.profile to lvm2 package.
  - Do not include /lib/udev and /lib/udev/rules.d in device-mapper package.
  - Fix some incorrect changelog dates.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.99-2
changelog:
  - Fix metadata area offset/size overflow if it's >= 4g and while using lvmetad.
  - Require the newest device-mapper-persistent-data-0.2.3-1.
  - Fix spec file's util-linux version definition for proper expansion when used.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.102-1
changelog:
  - Fix missing build dependency for scripts subdir in Makefile.
  - Fix node up/down handling in clvmd corosync module.
  - Fix 3-thread clvmd deadlock triggered by cleanup on EOF from client.
  - Remove VG from lvmetad before restoring it with vgcfgrestore.
  - Add devtypes report command to display built-in recognised block device types.
  - Fix CC Makefile override which had reverted to using built-in value. (2.02.75)
  - Recognise bcache block devices in filter (experimental).
  - Run lvm2-activation-net after lvm2-activation service to prevent parallel run.
  - Add man page entries for lvmdump's -u and -l options.
  - Fix lvm2app segfault while using lvm_list_pvs_free fn if there are no PVs.
  - Improve of clvmd singlenode locking simulation.
  - lvconvert no longer converts LVs of "mirror" segment type to thinpool.
  - lvconvert no longer converts thinpool sub-LVs to "mirror" segment type.
  - Direct udev to use 3min timeout for LVM devices. Recent udev has default 30s.
  - Do not scan multipath or RAID components and avoid incorrect autoactivation.
  - Fix MD/loop udev handling to fire autoactivation after setup or coldplug only.
  - Make RAID capable of single-machine exclusive operations in a cluster.
  - Drop calculation of read ahead for deactivated volume.
  - Check for exactly one lv segment in validation of thin pools and volumes.
  - Fix dmeventd unmonitoring of thin pools.
  - Fix lvresize for stacked thin pool volumes (i.e. mirrors).
  - Write Completed debug message before reinstating log defaults after command.
  - Refresh existing VG before autoactivation (event retrigger/device reappeared).
  - Use pvscan -b in udev rules to avoid a deadlock on udev process count limit.
  - Add pvscan -b/--background for the command to be processed in the background.
  - Don't assume stdin file descriptor is readable.
  - Avoid unlimited recursion when creating dtree containing inactive pvmove LV.
  - Require exactly 3 arguments for lvm2-activation-generator. Remove defaults.
  - Inform lvmetad about any lost PV label to make it in sync with system state.
  - Support most of lvchange operations on stacked thin pool meta/data LVs.
  - Enable non-clustered pvmove of snapshots and snapshot origins.
  - Add ability to pvmove non-clustered RAID, mirror, and thin volumes.
  - Make lvm2-activation-generator silent unless it's in error state.
  - Remove "mpath major is not dm major" msg for mpath component scan (2.02.94).
  - Prevent cluster mirror logs from being corrupted by redundant checkpoints.
  - Fix ignored lvmetad update on loop device configuration (2.02.99).
  - Use LVM_PATH instead of hardcoded value in lvm2 activation systemd generator.
  - Fix vgck to notice on-disk corruption even if lvmetad is used.
  - Move mpath device filter before partitioned filter (which opens devices).
  - Require confirmation for vgchange -c when no VGs listed explicitly.
  - Also skip /var and /var/log by default in blkdeactivate when unmounting.
  - Add support for bind mounts in blkdeactivate.
  - Add blkdeactivate -v/--verbose for debug output from external tools used.
  - Add blkdeactivate -e/--errors for error messages from external tools used.
  - Suppress messages from external tools called in blkdeactivate by default.
  - Fix inability to remove a VG's cluster flag if it contains a mirror.
  - Fix bug making lvchange unable to change recovery rate for RAID.
  - Prohibit conversion of thin pool to external origin.
  - Workaround gcc v4.8 -O2 bug causing failures if config/checks=1 (32bit arch).
  - Verify clvmd message validity before processing and log error if incorrect.
  - When creating PV on existing LV don't forbid reserved LV names on LVs below.
  - When converting mirrors, default segtype should be the same unless specified.
  - Make "raid1" the default mirror segment type.
  - Fix clogd descriptor leak when daemonizing.
  - Fix clvmd descriptor leak on restart.
  - Add pipe_open/close() to use instead of less efficient/secure popen().
  - Inherit and apply any profile attached to a VG if creating new thin pool.
  - Add initial support thin pool lvconvert --repair.
  - Add --with-thin-repair and --with-thin-dump configure options.
  - Add lvm.conf thin_repair/dump_executable and thin_repair_options.
  - Require 1.9 thin pool target version for online thin pool metadata resize.
  - Ignore previous LV seg with alloc contiguous & cling when num stripes varies.
  - Fix segfault if devices/global_filter is not specified correctly.
  - Tidy dmeventd fifo initialisation.
  - Detect invalid sector supplied to 'dmsetup message'.
  - Free any previously-set string if a dm_task_set_* function is called again.
  - Do not allow passing empty new name for dmsetup rename.
  - Display any output returned by 'dmsetup message'.
  - Add dm_task_get_message_response to libdevmapper.
  - Create dmeventd timeout threads as "detached" so exit status is freed.
  - Add DM_ABORT_ON_INTERNAL_ERRORS env var support to abort on internal errors.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.103-1
changelog:
  - Ensure vgid matches before removing vgname entry from lvmetad cache.
  - Add --ignoreskippedcluster for exit status success when clustered VGs skipped.
  - Fix 3 minute udev timeout so that it is applied for all LVM volumes.
  - Fix thin/raid & activation config defaults with configure --disable-devmapper.
  - Fix RAID calculation for sufficient allocatable space.
  - lvconvert from linear to mirror or RAID1 now honors mirror_segtype_default.
  - Add thin-performance configuration profile.
  - Add lvm.conf allocation/thin_pool_chunk_size_policy option.
  - Fix contiguous & cling allocation policies for parity RAID.  (2.02.100)
  - Have lvmconf --enable/disable-cluster reset/set use_lvmetad.
  - Add seg_size_pe field to reports.
  - Support start+length notation with command line PE ranges.
  - Exit cleanly with message when pvmove cannot restart because LV is inactive.
  - Define symbolic names for subsystem udev flags in libdevmapper for easier use.
  - Make subsystem udev rules responsible for importing DM_SUBSYSTEM_UDEV_FLAG*.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.103-2
changelog:
  - Add internal flag for temporary LVs to properly direct udev to not interfere.
  - Fix endless loop in blkdeactivate <device>... if unable to umount/deactivate.
  - Add dev-block-<major>:<minor>.device systemd alias for complete PV tracking.
  - Use major:minor as short form of --major and --minor arg for pvscan --cache.
  - Remove 2>/dev/null from three lvm commands executed by vgimportclone.
  - Add configure --enable-udev-systemd-background-jobs.
  - Add lvm2-pvscan@.service to run pvscan as a service for lvmetad/autoactivation.
  - Fix lvconvert swap of poolmetadata volume for active thin pool.
  - Check for open count with a timeout before removal/deactivation of an LV.
  - Report RAID images split with tracking as out-of-sync ("I").
  - Improve parsing of snapshot lv segment.
  - Add workaround for deactivation problem of opened virtual snapshot.
  - Disable unsupported merge for virtual snapshot.
  - Move code to remove virtual snapshot from tools to lib for lvm2app.
  - Fix possible race during daemon worker thread creation (lvmetad).
  - Fix possible deadlock while clearing lvmetad cache for full rescan.
  - Fix possible race while creating/destroying memory pools.
  - Recognise NVM Express devices in filter.
  - Fix failing metadata repair when lvmetad is used.
  - Fix incorrect memory handling when reading messages from lvmetad.
  - Fix locking in lvmetad when handling the PV which is gone.
  - Recognize new flag to skip udev scanning in udev rules and act appropriately.
  - Add support for flagging an LV to skip udev scanning during activation.
  - Improve message when unable to change discards setting on active thin pool.
  - Run full scan before vgrename operation to avoid any cache name collision.
  - Fix lvconvert when converting to a thin pool and thin LV at once.
  - Skip race errors when non-udev dmsetup build runs on udev-enabled system.
  - Skip error message when holders are not present in sysfs.
  - Use __linux__ instead of linux define to make libdevmapper.h C compliant.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.103-3
changelog:
  - Fix missing lvmetad scan for PVs found on MD partitions.
  - Respect DM_UDEV_DISABLE_OTHER_RULES_FLAG in lvmetad udev rules.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.104-1
changelog:
  - Workaround VG refresh race during autoactivation by retrying the refresh.
  - Handle failures in temporary mirror used when adding images to mirrors.
  - Fix and improve logic for implicitely exclusive activations.
  - Return success when LV cannot be activated because of volume_list filter.
  - Return proper error state for remote exclusive activation.
  - Fix clvmd message verification to not reject REMOTE flag. (2.02.100)
  - Compare equality of double values with DBL_EPSILON predefined constant.
  - Use additional gcc warning flags by default.
  - Add ignore_lvm_mirrors to config file to read/ignore labels on mirrors.
  - Use #ifdef __linux__ instead of linux throughout.
  - Consistently report on stderr when device is not found for dmsetup info.
  - Skip race errors when non-udev dmsetup build runs on udev-enabled system.
  - Skip error message when holders are not present in sysfs.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.105-1
changelog:
  - Fix thin LV flagging for udev to skip scanning only if the LV is wiped.
  - Replace use of xfs_check with xfs_repair in fsadm.
  - Mark lvm1 format metadata as FMT_OBSOLETE. Do not use it with lvmetad.
  - Invalidate cached VG struct after a PV in it gets orphaned. (2.02.87)
  - Mark pool format metadata as FMT_OBSOLETE.
  - Use major:minor in lvm2-pvscan@.service for proper global_filter application.
  - Syntax and spelling fixes in some man pages.
  - Dependency scan counts with snapshots and external origins.
  - Make sure VG extent size is always greater or equal to PV phys. block size.
  - Optimize double call of stat() for cached devices.
  - Enable support for thin provisioning for default configuration.
  - Disable online thin pool metadata resize for 1.9 kernel thin target.
  - Shortened code for initialization of raid segment types.
  - Test for remote exclusive activation after activation fails.
  - Support lvconvert --merge for thin snapshots.
  - Add support to read thin device id from table line entry.
  - Drop extra test for origin when testing merging origin in lv_refresh().
  - Extend lv_remove_single() to not print info about removed LV.
  - Replace open_count check with lv_check_not_in_use() for snapshot open test.
  - Add error messages with LV names for failing lv refresh.
  - Compile/link executables with new RELRO and PIE options (non-static builds).
  - Support per-object compilation cflags via CFLAGS_object.o.
  - Automatically detect support for compiler/linker options to use RELRO and PIE.
  - Add --splitsnapshot to lvconvert to separate out cow LV.
  - Reinstate origin reload to complete lvconvert -s with active LVs. (2.02.98)
  - Select only active volume groups if vgdisplay -A is used.
  - Add -p and LVM_LVMETAD_PID env var to lvmetad to change pid file.
  - Allow lvmetad to reuse stale socket.
  - Only unlink lvmetad socket on error if created by the same process.
  - Append missing newline to lvmetad missing socket path error message.
  - Add allocation/use_blkid_wiping to lvm.conf to enable blkid wiping.
  - Enable blkid_wiping by default if the blkid library is present.
  - Add configure --disable-blkid_wiping to disable libblkid signature detection.
  - Add -W/--wipesignatures lvcreate option to support wiping on new LVs.
  - Add allocation/wipe_signatures_when_zeroing_new_lvs to lvm.conf.
  - Do not fail the whole autoactivation if the VG refresh done before fails.
  - Do not connect to lvmetad on vg/lvchange --sysinit -aay and socket absent.
  - Use lv_check_not_in_use() when testing device in use before merging.
  - Check for failure of lvmcache_add_mda() when writing pv.
  - Check for failure of dev_get_size() when reporting device size.
  - Drop extra unneeded '/' when scanning sysfs directory.
  - Fix undef value if skipped clustered VG ignored for toollib PV seg. (2.02.103)
  - Support validation of VG/LV names in liblvm/python.
  - Allow creation of PVs with arguments to liblvm/python.
  - Ensure sufficient metadata copies retained in liblvm/python vgreduce.
  - Fix installation of profiles from conf subdir when not building in srcdir.
  - Show UUIDs for missing PVs in reports.
  - Add reporting of thin_id device id for thin volumes.
  - Fix reporting of empty numerical values for recently-added fields.
  - Revert activation of activated nodes if a node preload callback fails.
  - Avoid busy looping on CPU when dmeventd reads event DM_WAIT_RETRY.
  - Ensure global mutex is held when working with dmeventd thread.
  - Drop taking timeout mutex for un/registering dmeventd monitor.
  - Allow section names in config file data to be quoted strings.
  - Close fifos before exiting in dmeventd restart() error path.
  - Catch invalid use of string sort values when reporting numerical fields.
  - Require util-linux >= 2.24 for blkid wiping support (via device-mapper pkg).
  - Add BuildRequires: libblkid-devel to build with blkid wiping functionality.
  - Do not install /run and /run/lvm directory but only own them by lvm2 package.
    These dirs are controlled by systemd's tmpfiles.d/lvm2.conf configuration.
  - Consolidate file permissions for all packaged files.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.105-2
changelog:
  - Avoid exposing temporary devices when initializing thin pool volume.
  - Remove udev rule for multipath's PATH_FAILED event processing,
    multipath handles that properly in its own udev rules now.
  - Remove duplicate udev rule for cryptsetup temporary devices,
    cryptsetup handles that properly directly in its code.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.106-1
changelog:
  - Require latest device-mapper-persistent-data 0.3.2-1.
  - Fix ignored --dataalignment/dataalignmentoffset for pvcreate --restorefile.
  - Fix lost information about bootloader area when using lvmetad.
  - Don't require --major to be specified when using -My option on kernels > 2.4.
  - Add configure --disable-thin_check_needs_check to support old thin_check.
  - Use thin_check --clear-needs-check-flag by default.
  - Add lvmthin man page to section 7.
  - Ensure mapped device names are not too long in vg_validate and lvrename.
  - Ensure resume failure in lvrename results in command failure.
  - Add explicit error message when using lvdisplay -c -m.
  - Report error if superfluous argument (e.g. PV name) supplied to pvscan.
  - Fix error message for pvdisplay -c -m and add one for pvdisplay -c -s.
  - Use EINVALID_CMD_LINE correctly instead of ECMD_FAILED in vgimport/export.
  - Obtain list of known VGs from lvmetad for pvchange --all.
  - Add man page for lvm-dumpconfig to section 8.
  - Validate name for renamed sub LVs.
  - When lvrename fails on argument parsing return EINVALID_CMD_LINE.
  - Fix exit code regression in failing pvchange command (2.02.66).
  - Include 'lvm dumpconfig --type missing' and '--type diff' output to lvmdump.
  - Return failure when specifying negative size for pvresize.
  - Fix memory corruption in cmd context refresh if clvmd leaks opened device.
  - Reinitialise lvmcache properly on fork to fix premature polldaemon exit.
  - Add 'lvm dumpconfig --type diff' to show differences from defaults.
  - Fix swap signature detection for devices smaller then 2MB.
  - Resolve memory release order for clvmd shutdown.
  - Report error when lvm2 activation is released in critical_section.
  - Fix memory corruption when pvscan reports long pv names.
  - Do not report internal orphan VG names when reporting pvdisplay/pvscan.
  - Fix pvdisplay -c man page referencing KB instead of sectors.
  - Skip redundant synchronization calls on local clvmd.
  - Use correct PATH_MAX for locking dir path.
  - Do not check for backups when when its creation is disabled.
  - Don't allow --mergedconfig without --type current in dumpconfig. Fix memleak.
  - Make global/lvdisplay_shows_full_device_path lvm.conf setting profilable.
  - Make global/{units|si_unit_consistency|suffix} lvm.conf setting profilable.
  - Validate minimal chunk size for snapshot COW volume in lvconvert.
  - Disallow lvconvert of origin to snapshot COW volume.
  - Make report lvm.conf settings profilable.
  - Add existing report settings to lvm.conf.
  - Use VG read lock during 'pvscan --cache -aay' autoactivation.
  - Issue a VG refresh before autoactivation only if the PV has changed/is new.
  - Add flag to lvmetad protocol to indicate the PV scanned has changed/is new.
  - Also add vgname to lvmetad protocol when referencing VGs for PVs scanned.
  - Add man page for lvm2-activation-generator.
  - Don't print an error and accept empty value for global/thin_disabled_features.
  - Do not try to check empty pool with scheduled messages.
  - Fix return value in pool_has_message() when quering for any message.
  - Cleanup all client resources on clvmd exit.
  - Use BLKID_CFLAGS when compiling with blkid support.
  - Make lvm 'dumpconfig --type default' complete for it to be consumed by lvm.
  - Run pvscan --cache via systemd-run in udev if the PV label is detected lost.
  - Fix memleak when lvmetad discovers PV to appear on another device.
  - Fix calculation of maximum size of COW device for snapshot (2.02.99).
  - Do not allow stripe size to be bigger then extent size for lvresize.
  - Zero snapshot COW header when creating read-only snapshot.
  - Comment out config lines in dumpconfig output without default values defined.
  - Improve detection of clustered mirror support.
  - Enhance raid code with feature flags, for now checks for raid10.
  - Move parsing of VG metadata from vg_commit() back to vg_write() (2.02.99)
  - Avoid a PV label scan while in a critical section.
  - Create /dev/disk/by-id/lvm-pv-uuid-<PV_UUID> symlink for each PV via udev.
  - lvcreate computes RAID4/5/6 stripes if not given from # of allocatable PVs.
  - Fix merging of old snapshot into thin volume origin.
  - Use --ignoreskippedcluster in lvm2-monitor initscript/systemd unit.
  - Do not use VG read/write state for LV read/write state.
  - Use --ignoreskippedcluster in activation systemd units if use_lvmetad=0.
  - Allow approximate allocation when specifying size in percentage terms.
  - Add basic LVM support for cache[pool] segment types.
  - Use local exclusive activation for creation of raid in cluster.
  - Use correctly signed 64b constant when selecting raid volumes.
  - Remove ExecReload from lvmetad systemd unit: lvmetad -R undefined. (2.02.98)
  - Do not fork lvmetad if running under systemd.
  - Wipe DM_snapshot_cow signature without prompt in new LVs with blkid wiping.
  - Avoid exposing temporary devices when initializing raid metadata volumes.
  - Add internal tags command to display any tags defined on the host.
  - Prohibit use of external origin with size incompatible with thin pool.
  - Avoid trying to convert single to thin pool and volume at the same time.
  - Add support for partitions on ZFS zvol.
  - Fix unwanted drop of hold flocks on forked children.
  - Respect LVM_LVMETAD_PIDFILE env var for lvm command.
  - Fix test when checking target version for available thin features.
  - Detect thin feature external_origin_extend and limit extend when missing.
  - Issue error if libbblkid detects signature and fails to return offset/length.
  - Update autoconf config.guess/sub to 2014-01-01.
  - Online thin pool metadata resize requires 1.10 kernel thin pool target.
  - Check for sprintf error when building internal device path.
  - Check for sprintf error when creating path for dm control node.
  - When buffer for dm_get_library_version() is too small, return error code.
  - Always reinitialize _name_mangling_mode in dm_lib_init().
  - Stop timeout thread immediately when the last worker thread is finished.
  - Fix dmeventd logging with parallel wait event processing.
  - Reuse _node_send_messages() for validation of transaction_id in preload.
  - Transaction_id could be lower by one only when messages are prepared.
  - Wrap is_selinux_enabled() to be called just once.
  - Use correctly signed 64b constant when working with raid volumes.
  - Exit dmeventd with pidfile cleanup instead of raising SIGKILL on DIE request.
  - Add new DM_EVENT_GET_PARAMETERS request to dmeventd protocol.
  - Do not use systemd's reload for dmeventd restart, use dmeventd -R instead.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.106-2
changelog:
  - Require exact lvm2/device-mapper version among LVM2 subpackages
    so all of them are always updated synchronously within one update.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.107-1
changelog:
  - Add cmirror-standalone subpackage containing new lvm2-cmirrord.service
    systemd unit for standalone cmirrord daemon management without cluster
    resource manager involvement.
  - Add lvm2-cluster-standalone subpackage containing new lvm2-clvmd.service
    and lvm2-cluster-activation.service systemd unit for standalone clvmd
    daemon management without cluster resource manager involvement.
  - Add Requires: resource-agents for lvm2-cluster and cmirror subpackages.
    The resource-agents package provides "clvm" cluster resource to manage
    clvmd and cmirrord instances. This replaces obsolete clvmd and cmirrord
    initscripts.
  - Introduce LCK_ACTIVATION to avoid concurrent activation of basic LV types.
  - Fix open_count test for lvchange --refresh or mirrors and raids.
  - Update pvs,vgs,lvs and lvm man page for selection support.
  - Add -S/--select to lvm devtypes for report selection.
  - Add -S/--select to pvs,vgs,lvs and {pv,vg,lv}display -C for report selection.
  - Use dm_report_init_with_selection now, implicit "selected" field appears.
  - Make use of libdm's DM_REPORT_FIELD_TYPE{SIZE,PERCENT,STRING_LIST} for fields.
  - Support all-or-nothing pvmove --atomic.
  - Automatically add snapshot metadata size for -l %ORIGIN calculation.
  - When converting RAID origin to cache LV, properly rename sub-LVs.
  - Use RemoveOnStop for lvm2-lvmetad.socket systemd unit.
  - Add thin-generic configuration profile for generic thin settings.
  - Fix crash when reporting empty labels on pvs.
  - Use retry_deactivation also when cleaning orphan devices.
  - Wait for client threads when shutting down lvmetad.
  - Remove PV from cache on pvremove.
  - Avoid repeatedly reporting of failure to connect to lvmetad.
  - Introduce MDA_FAILED to permit metadata updates even if some mdas are missing.
  - Prompt when setting the VG cluster attr if the cluster is not setup.
  - Allow --yes to skip prompt in vgextend (worked only with -f).
  - Don't use name mangling for LVM - it never uses dm names with wrong char set.
  - Remove default.profile and add {command,metadata}_profile_template.profile.
  - Use proper umask for systemd units generated by lvm2-activation-generator.
  - Check for failing mirror_remove_missing() function.
  - Prompt before converting volumes to thin pool and thin pool metadata.
  - Add dumpconfig --type profilable-{metadata,command} to select profile type.
  - Exit immediately with error if command profile is found invalid.
  - Separate --profile cmd line arg into --commandprofile and --metadataprofile.
  - Strictly separate command profiles and per-VG/LV profiles referenced in mda.
  - Fix dumpconfig --type diff when run as second and later cmd in lvm shell.
  - Fix wrong profile reuse from previous run if another cmd is run in lvm shell.
  - Move cache description from lvm(8) to new lvmcache(7) man page.
  - Display skipped prompt in silent mode.
  - Make reporting commands show help about possible sort keys on '-O help'.
  - Add metadata_percent to lvs_cols.
  - Take account of parity areas with alloc anywhere in _calc_required_extents.
  - Use proper uint64 casting for calculation of cache metadata size.
  - Better support for nesting of blocking signals.
  - Use only sigaction handler and drop duplicate signal handler.
  - Separate signal handling and flock code out into lib/misc.
  - Don't start dmeventd checking seg_monitor and monitoring is disabled.
  - Catch CTRL-c during pvremove prompts.
  - Show correct availability status for snapshot origin in lvscan.
  - Move segment thin pool/volume info into segment display 'lvdisplay --maps'.
  - Display thin pool usage even when just thin volume is available.
  - Display monitoring status for monitorable segments in 'lvdisplay --maps'.
  - Display virtual extents for virtual LVs in 'lvdisplay --maps'.
  - Make vgsplit fail cleanly when not all PVs are specified for RAID 4/5/6.
  - Make vgsplit work on mirrors with logs that share PVs with images.
  - Use devices/ignore_suspended_devices=0 by default if not defined in lvm.conf.
  - Use proper libmem mempool for allocation of unknown segment name.
  - Add --readonly to reporting and display tools for lock-free metadata access.
  - Add locking_type 5 for dummy locking for tools that do not need any locks.
  - Fix _recover_vg() error path when lock conversion fails.
  - Use X for LV attributes that are unknown when activation disabled.
  - Only output lvdisplay 'LV Status' field when activation is enabled.
  - Use lvmetad_used() in pvscan instead of config_tree.
  - Configure --enable-udev-systemd-background-jobs if not disabled explicitly.
  - Add lvmdump -s to collect system info and context (currently systemd only).
  - Refactor allocation code to make A_POSITIONAL_FILL explicit.
  - Use thread-safe ctime_r() for clvmd debug logging.
  - Skip adding replies to already finished reply thread.
  - Use mutex to check number of replies in request_timed_out() in clvmd.
  - Drop usage of extra reply_mutex for localsock in clvmd.
  - Protect manipulation with finished flag with mutex in clvmd.
  - Shift mutex creation and destroy for localsock in clvmd to correct place.
  - Fix usage of --test option in clvmd.
  - Skip more libraries to be mlocked in memory.
  - Remove LOCKED flag for pvmove replaced with error target.
  - Return invalid command when specifying negative polling interval.
  - Make "help" and "?" reporting fields implicit.
  - Recognize implicit "selected" field if using dm_report_init_with_selection.
  - Add support for implicit reporting fields which are predefined in libdm.
  - Add DM_REPORT_FIELD_TYPE_PERCENT: separate number and percent fields.
  - Add dm_percent_range_t,dm_percent_to_float,dm_make_percent to libdm for reuse.
  - Add dm_report_reserved_value to libdevmapper for reserved value definition.
  - Also display field types when listing all fields in selection help.
  - Recognize "help" keyword in selection string to show brief help for selection.
  - Always order items reported as string list field lexicographically.
  - Add dm_report_field_string_list to libdevmapper for direct string list report.
  - Add DM_REPORT_FIELD_TYPE_STRING_LIST: separate string and string list fields.
  - Add dm_str_list to libdevmapper for string list type definition and its reuse.
  - Add dmsetup -S/--select to define selection criteria for dmsetup reports.
  - Add dm_report_init_with_selection to intialize report with selection criteria.
  - Add DM_REPORT_FIELD_TYPE_SIZE: separate number and size reporting fields.
  - Use RemoveOnStop for dm-event.socket systemd unit.
  - Document env var 'DM_DEFAULT_NAME_MANGLING_MODE' in dmsetup man page.
  - Warn user about incorrect use of cookie with 'dmsetup remove --force'.
  - Also recognize 'help'/'?' as reserved sort key name to show help.
  - Add dm_units_to_factor for size unit parsing.
  - Increase bitset size for minors for thin dmeventd plugin.


author: Alasdair Kergon <agk@redhat.com> - 2.02.108-1
changelog:
  - Remove an erroneous duplicate const from libdevmapper.h. (2.02.107)
  - Add lvscan --cache which re-scans constituents of a particular LV.
  - Make dmeventd's RAID plugin re-scan failed PVs when lvmetad is in use.
  - Improve code sharing for lvconvert and lvcreate and pools (cache & thin).
  - Improve lvconvert --merge validation.
  - Improve lvconvert --splitsnapshot validation.
  - Add report/list_item_separator lvm.conf option.
  - Add lv_active_{locally,remotely,exclusively} LV reporting fields.
  - Enhance lvconvert thin, thinpool, cache and cachepool command line support.
  - Display 'C' only for cache and cache-pool target types in lvs.
  - Prompt for confirmation before change LV into a snapshot exception store.
  - Return proper error codes for some failing lvconvert funtions.
  - Add initial code to use cache tools (cache_check|dump|repair|restore).
  - Support lvdisplay --maps for raid.
  - Add --activationmode degraded to activate degraded raid volumes by default.
  - Add separate lv_active_{locally,remotely,exclusively} LV reporting fields.
  - Recognize "auto"/"unmanaged" values in selection for appropriate fields only.
  - Add report/binary_values_as_numeric lvm.conf option for binary values as 0/1.
  - Add --binary arg to pvs,vgs,lvs and {pv,vg,lv}display -C for 0/1 on reports.
  - Add separate reporting fields for each each {pv,vg,lv}_attr bit.
  - Separate LV device status reporting fields out of LV fields.
  - Fix regression causing PVs not in VGs to be marked as allocatable (2.02.59).
  - Fix VG component of lvid in vgsplit/vgmerge and check in vg_validate.
  - Add lv_full_name, lv_parent and lv_dm_path fields to reports.
  - Change lv_path field to suppress devices that never appear in /dev/vg.
  - Postpone thin pool lvconvert prompts (2.02.107).
  - Require --yes option to skip prompt to lvconvert thin pool chunksize.
  - Support lvremove -ff to remove thin volumes from broken thin pools.
  - Require --yes to skip raid repair prompt.
  - Change makefile %.d generation to handle filename changes without make clean.
  - Fix use of buildir in make pofile.
  - Enhance private volumes UUIDs with suffixed for easier detection.
  - Do not use reserved _[tc]meta volumes for temporary LVs.
  - Leave backup pool metadata with _meta%d suffix instead of reserved _tmeta%d.
  - Allow RAID repair to reuse PVs from same image that suffered a failure.
  - New RAID images now avoid allocation on any PVs in the same parent RAID LV.
  - Always reevaluate filters just before creating PV.
  - Fix dm_report_field_string_list to handle delimiter with multiple chars.
  - Add dm_report_field_reserved_value for per-field reserved value definition.


author: Alasdair Kergon <agk@redhat.com> - 2.02.109-1
changelog:
  - Allow approximate allocation with +%FREE in lvextend.
  - Fix a segfault in lvscan --cache when devices were already missing. (2.02.108)
  - Display actual size changed when resizing LV.
  - Remove possible spurious "not found" message on PV create before wiping.
  - Handle upgrade from 2.02.105 when an LV now gaining a uuid suffix is active.
  - Remove lv_volume_type field from reports. (2.02.108)
  - Fix incorrect persistent .cache after vgcreate with PV creation. (2.02.108)
  - Add dm_tree_set_optional_uuid_suffixes to libdevmapper to handle upgrades.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.110-1
changelog:
  - Fix manipulation with thin-pools which are excluded via volume_list.
  - Support lv/vgremove -ff to remove thin vols from broken/inactive thin pools.
  - Fix typo breaking configure --with-lvm1=shared.
  - Modify lvresize code to handle raid/mirrors and physical extents.
  - Don't allow pvcreate to proceed if scanning or filtering fails.
  - Cleanly error when creating RAID with stripe size < PAGE_SIZE.
  - Print name of LV which on activation triggers delayed snapshot merge.
  - Add lv_layout and lv_role LV reporting fields.
  - Properly display lvs lv_attr volume type and target type bit for cache origin.
  - Fix pvcreate_check() to update cache correctly after signature wiping.
  - Fix primary device lookup failure for partition when processing mpath filter.
  - If LV inactive and non-clustered, do not issue "Cannot deactivate" on -aln.
  - Remove spurious "Skipping mirror LV" message on pvmove of clustered mirror.
  - Improve libdevmapper-event select() error handling.
  - Add extra check for matching transation_id after message submitting.
  - Add dm_report_field_string_list_unsorted for str. list report without sorting.
  - Support --deferred with dmsetup remove to defer removal of open devices.
  - Update dm-ioctl.h to include DM_DEFERRED_REMOVE flag.
  - Add support for selection to match string list subset, recognize { } operator.
  - Fix string list selection with '[value]' to not match list that's superset.
  - Fix string list selection to match whole words only, not prefixes.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.111-1
changelog:
  - Pass properly sized char buffers for sscanf when initializing clvmd.
  - Reinstate nosync logic when extending mirror. (2.02.110)
  - Fix total area extent calculation when allocating cache pool. (2.02.110)
  - Restore proper buffer size for parsing mountinfo line (1.02.89)


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.112-1
changelog:
  - Add cache_{read,write}_{hits,misses} reporting fields.
  - Add cache_{total,used,dirty}_blocks reporting fields.
  - Add _corig as reserved suffix.
  - Reduce number of VG writes and commits when creating spare volumes.
  - When remove_layer_from_lv() removes layer, restore subLV names.
  - Cache-pool in use becomes invisible LV.
  - Don't prompt for removal of _pmspare in VG without pool metadata LV.
  - Deactivation of snapshot origin detects and deactivates left-over snapshots.
  - Properly report error when taking snapshot of any cache type LV.
  - Add basic thread debugging messages to dmeventd.
  - Include threads being shutdown in dmeventd device registration responses.
  - Inital support for external users of thin pools based on transaction_id.
  - Report some basic percentage info for cache pools.
  - Introduce size_mb_arg_with_percent() for advanced size arg reading.
  - Add extra support for '.' as decimal point in size args.
  - Add configure parameters for default segment type choices.
  - Add global/sparse_segtype_default setting to use thin for --type sparse.
  - Update and correct lvcreate and lvcovert man pages.
  - Mark pools and snapshots as unzeroable volumes.
  - Check for zeroing of volume after segment type is fully detected.
  - Better support for persistent major and minor options with lvcreate.
  - Refactor lvcreate towards more complete validation of all supported options.
  - Support lvcreate --type linear.
  - Improve _should_wipe_lv() to warn with message.
  - Inform about temporarily created volumes only in verbose mode.
  - Better support for --test mode with pool creation.
  - Query lock holding LV when replacing and converting raid volumes.
  - Add extra validate for locked lv within validate_lv_cache_create().
  - Add internal lvseg_name() function.
  - Skip use of lock files for virtual internal VG names.
  - Fix selection on {vg,lv}_permissions fields to properly match selection criteria.
  - Fix lv_permissions reporting to display read-only{-override} instead of blank.
  - Fix liblvm2cmd and lvm shell to respect quotes around args in cmd line string.
  - Permit extent sizes > 128KB that are not power of 2 with lvm2 format.
  - Remove workaround for lvm2-monitor.service hang on stop if lvmetad stopped.
  - Change vgremove to use process_each_lv_in_vg.
  - Allow lvconvert --repair and --splitmirrors on internal LVs.
  - Introduce WARN_ flags to control some metadata warning messages.
  - Use process_each_pv in vgreduce.
  - Refactor process_each_pv in toollib.
  - Introduce single validation routine for pool chunk size.
  - Support --yes like --force in vg/lvremove to skip y|n prompt.
  - Support --yes with lvconvert --splitsnapshot.
  - Fix detection of unsupported thin external lvconversions.
  - Fix detection of unsupported cache and thin pool lvconversions.
  - Fix detection of unsupported lvconversion of cache to snapshot.
  - Improve code for creation of cache and cache pool volumes.
  - Check cluster-wide (not local) active status before removing LV.
  - Properly check if activation of removed cached LV really activated.
  - lvremove cached LV removes cachepool (keep with lvconvert --splitcache).
  - Always remove spare LV with last removed pool volume.
  - Support lvconvert --splitcache and --uncache of cached LV.
  - Option --cache has also shortcut -H (i.e. lvcreate -H).
  - Refactor lvcreate code and better preserve --type argument.
  - Refactor filter processing around lvmetad.
  - Refactor process_each_lv in toollib.
  - Refactor process_each_vg in toollib.
  - Pools cannot be used as external origin.
  - Use lv_update_and_reload() for snapshot reload.
  - Don't print message in adjusted_mirror_region_size() in activation.
  - Improve lv_update_and_reload() to find out proper lock holding LV.
  - Improve search of LV in lv_ondisk().
  - Do not scan sysfs in lv_check_not_in_use() when device is closed.
  - Backup final metadata after resync of mirror/raid.
  - Unify handling of --persistent option for lvcreate and lvchange.
  - Validate major and minor numbers stored in metadata.
  - Use -fPIE when linking -pie executables.
  - Support DEBUG_MEMLOCK to trap unsupported mmap usage.
  - Enable cache segment type by default.
  - Ensure only supported volume types are used with cache segments.
  - Fix inablility to specify cachemode when 'lvconvert'ing to cache-pool.
  - Grab cluster lock for active LVs when setting clustered attribute.
  - Use va_copy to properly pass va_list through functions.
  - Add function to detect rotational devices.
  - Review internal checks for mirror/raid/pvmove volumes.
  - Track mirror segment type with separate MIRROR flag.
  - Fix cmirror endian conversions.
  - Introduce lv_is_pvmove/locked/converting/merging macros.
  - Avoid leaving linear logical volume when thin pool creation fails.
  - Don't leak alloc_handle on raid target error path.
  - Properly validate raid leg names.
  - Archive metadata before starting their modification in raid target.
  - Add missing vg_revert() in suspend_lv() raid and snapshot error path.
  - Add missing backup of lvm2 metadata after some raid modifications.
  - Use vg memory pool for extent allocation.
  - Add allocation/physical_extent_size config option for default PE size of VGs.
  - Demote an error to a warning when devices known to lvmetad are filtered out.
  - Re-order filter evaluation, making component filters global.
  - Fix logic that checks for full scan before iterating through devices.
  - Introduce common code to modify metadata and reload updated LV.
  - Fix rename of active snapshot volume in cluster.
  - Make sure shared libraries are built with RELRO option.
  - Update cache creation and dm_config_node to pass policy.
  - Allow activation of any thin-pool if transaction_id supplied is 0.
  - Don't print uninitialized stack bytes when non-root uses dm_check_version().
  - Fix selection criteria to not match reserved values when using >, <, >=, <.
  - Add DM_LIST_HEAD_INIT macro to libdevmapper.h.
  - Fix dm_is_dm_major to not issue error about missing /proc lines for dm module.


author: Alasdair Kergon <agk@redhat.com> - 2.02.113-1
changelog:
  - Add --cachepolicy and --cachesettings options to lvchange.
  - Validate that converted volume and specified pool volume differ in lvconvert.
  - Fix regression in vgscan --mknodes usage (2.02.112).
  - Default to configure --enable-udev-systemd-background-jobs for systemd>=205.
  - Fix ignore_vg() to properly react on various vg_read errors (2.02.112).
  - Failed recovery returns FAILED_RECOVERY status flag for vg_read().
  - Exit with non-zero status code when pvck encounters a problem.
  - Fix clean_tree after activation/resume for cache target (2.02.112).
  - Fix memory corruption with sorting empty string lists (1.02.86).
  - Fix man dmsetup.8 syntax warning of groff.
  - Accept unquoted strings and / in place of {} when parsing configs.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.113-2
changelog:
  - Fix regression when parsing /dev/mapper dir (2.02.112).
  - Fix missing rounding to 64KB when estimating optimal thin pool chunk size.
  - Fix typo in clvmd initscript causing CLVMD_STOP_TIMEOUT variable to be ignored.
  - Fix size in pvresize "Resizing to ..." verbose msg to show proper result size.


author: Alasdair Kergon <agk@redhat.com> - 2.02.114-3
changelog:
  - Avoid file descriptor leak in clients that open repeated lvmetad connections.
  - Add --cachepolicy and --cachesettings to lvcreate.
  - Fix regression when parsing /dev/mapper dir (2.02.112).
  - Fix missing rounding to 64KB when estimating optimal thin pool chunk size.
  - Fix typo in clvmd initscript causing CLVMD_STOP_TIMEOUT var to be ignored.
  - Fix size in pvresize "Resizing to ..." verbose msg to show proper result size.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.115-1
changelog:
  - Report segment types without monitoring support as undefined.
  - Support lvchange --errorwhenfull for thin pools.
  - Improve the processing and reporting of duplicate PVs.
  - Report lv_health_status and health attribute also for thin pool.
  - Add lv_when_full reporting field.
  - Add support for lvcreate --errorwhenfull y|n for thin pools.
  - Fix lvconvert --repair to honour resilience requirement for segmented RAID LV.
  - Filter out partitioned device-mapper devices as unsuitable for use as PVs.
  - Also notify lvmetad about filtered device if using pvscan --cache DevicePath.
  - Use LVM's own selection instead of awk expressions in clvmd startup scripts.
  - Do not filter out snapshot origin LVs as unusable devices for an LVM stack.
  - Fix incorrect rimage names when converting from mirror to raid1 LV (2.02.112).
  - Introduce pvremove_many to avoid excessive metadata re-reading and messages.
  - Check for cmirror availability during cluster mirror creation and activation.
  - Add cache_policy and cache_settings reporting fields.
  - Add missing recognition for --binary option with {pv,vg,lv}display -C.
  - Fix vgimportclone to notify lvmetad about changes done if lvmetad is used.
  - Fix vgimportclone to properly override config if it is missing in lvm.conf.
  - Fix automatic use of configure --enable-udev-systemd-background-jobs.
  - Correctly rename active split LV with -splitmirrors for raid1.
  - Add report/compact_output to lvm.conf to enable/disable compact report output.
  - Still restrict mirror region size to power of 2 when VG extent size is not.
  - Reduce severity of ioctl error message when dmeventd waitevent is interrupted.
  - Report 'unknown version' when incompatible version numbers were not obtained.
  - Report more info from thin pool status (out of data, metadata-ro, fail).
  - Support error_if_no_space for thin pool target.
  - Fix segfault while using selection with regex and unbuffered reporting.
  - Add dm_report_compact_fields to remove empty fields from report output.
  - Remove unimplemented dm_report_set_output_selection from libdevmapper.h.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.115-2
changelog:
  - Set default cache_mode to writehrough when missing in metadata.
  - Add BuildRequires: device-mapper-persistent-data
    for proper thin and cache tool configuration.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.116-3
changelog:
  - Deactivate unused thin pools activated with lvm2 pre-2.02.112 versions.
  - Check lock holding LV when lvconverting stacked raid LV in cluster.
  - Support udev external dev info for filters: PV min size, mpath, md, partition.
  - Add fw_raid_component_detection lvm.conf option to enable FW raid detection.
  - Add devices/external_device_info_source lvm.conf option ("none" by default).
  - Scan pools in for_each_sub_lv() and add for_each_sub_lv_except_pools().
  - Fix lvm2app lvm_lv_get_property return value for fields with info/status ioctl.
  - Fix lvm2app regression in lvm_lv_get_attr causing unknown values (2.02.115).
  - Preserve chunk size with repair and metadata swap of a thin pool.
  - Fix raid --splitmirror 1 functionality (2.02.112).
  - Fix tree preload to handle splitting raid images.
  - Do not support unpartitioned DASD devices.
  - Improve config validation to check if setting with string value can be empty.


author: Peter Rajnoha <prajnoha@redhat.com> - 2.02.118-1
changelog:
  - Fix LV processing with selection to always do the selection on initial state.
  - Store metadata size + checksum in lvmcache and add struct lvmcache_vgsummary.
  - Remove inaccessible clustered PVs from 'pvs -a'.
  - Don't invalidate cached orphan information while global lock is held.
  - Avoid rescan of all devices when requested pvscan for removed device.
  - Measure configuration timestamps with nanoseconds when available.
  - Disable lvchange of major and minor of pool LVs.
  - Fix pvscan --cache to not scan and read ignored metadata areas on PVs.
  - Add After=iscsi-shutdown.service to blk-availability.service systemd unit.
  - Disallow vgconvert from changing metadata format when lvmetad is used.
  - Don't do a full read of VG when creating a new VG with an existing name.
  - Reduce amount of VG metadata parsing when looking for vgname on a PV.
  - Avoid reparsing same metadata when reading same metadata from multiple PVs.
  - Save extra device open/close when scanning device for size.
  - Fix seg_monitor field to report status also for mirrors and thick snapshots.
  - Replace LVM_WRITE with LVM_WRITE_LOCKED flags in metadata if system ID is set.
  - Preserve original format type field when processing backup files.
  - Implement status action for lvm2-monitor initscript to display monitored LVs.
  - Allow lvchange -p to change kernel state only if metadata state differs.
  - Fix incorrect persistent .cache after report with label fields only (2.02.106).
  - Reinstate PV tag recognition for pvs if reporting label fields only (2.02.105).
  - Rescan devices before vgimport with lvmetad so exported VG is seen.
  - Fix hang by adjusting cluster mirror regionsize, avoiding CPG msg limit.
  - Do not crash when --cachepolicy is given without --cachesettings.
  - Add NEEDS_FOREIGN_VGS flag to vgimport so --foreign is always supplied.
  - Add --foreign to the 6 display and reporting tools and vgcfgbackup.
  - Install /etc/lvm/lvmlocal.conf template with local section for systemid.
  - Record creation_host_system_id in lvm2 metadata (never set yet).
  - Reinstate recursive config file tag section processing. (2.02.99)
  - Add 'lvm systemid' to display the current system ID (never set yet).
  - Fix configure to properly recognize --with-default-raid10-segtype option.
  - Do not refresh filters/rescan if no signature is wiped during pvcreate.
  - Enforce none external dev info for wiping during pvcreate to avoid races.
  - Add global/system_id_source and system_id_file to lvm.conf (disabled).
  - Add support for VG system_id to control host access to VGs.
  - Update vgextend to use process_each_vg.
  - Add --ignoreskippedcluster to pvchange.
  - Allow pvchange to modify several properties at once.
  - Update pvchange to use process_each_pv.
  - Fix pvs -a used with lvmetad to filter out devices unsuitable for PVs.
  - Fix selection to recognize units for ba_start, vg_free and seg_start fields.
  - Add support for -S/--select to vgexport and vgimport.
  - Add support for -S/--select to vgdisplay, lvdisplay and pvdisplay without -C.
  - Add support for -S/--select to vgremove and lvremove.
  - Add support for -S/--select to vgchange,lvchange and pvchange.
  - Add infrastructure to support selection for non-reporting tools.
  - Add LVM_COMMAND_PROFILE env var to set default command profile name to use.
  - Set CLOEXEC flag on file descriptors originating in libdaemon.
  - Add dm_report_object_is_selected for generalized interface for report/select.


